All MIBs › HP-ICF-RELOAD-MIB › hpicfReloadState
hpicfReloadState
Module: HP-ICF-RELOAD-MIB
OID (symbolic): HP-ICF-RELOAD-MIB::hpicfReloadState
OID (numeric): 1.3.6.1.4.1.11.2.14.11.1.4.20.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object specifies the state of the device. If it is in: (1) 'no reload' was scheduled (2) 'reload after' was scheduled (3) 'reload at' was scheduled To cancel the scheduled reload, this object needs to be set with (1). NOTE: This object cannot be set with (2) or (3).When hpicfReloadAfter or hpicfReloadAt is scheduled the state of hpicfReloadState is automatically changed to (2) or (3) respectively.
What is hpicfReloadState?
This read-write INTEGER (notScheduled(1)/reloadAfter(2)/reloadAt(3)) reports and, only via value 1, controls whether a device reload is scheduled; it cannot be directly set to reloadAfter or reloadAt, since those states are set automatically when hpicfReloadAfter or hpicfReloadAt is configured, and setting this to 1 cancels any scheduled reload. Admins use this to check for a pending scheduled reload or to cancel one that was previously set. Setting this to notScheduled(1) cancels an in-progress scheduled reload regardless of whether it was set via reloadAfter or reloadAt.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.1.4.20.1.1 snmpwalk -v2c -c public <target> HP-ICF-RELOAD-MIB::hpicfReloadState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.1.4.20.1.1.1 snmpget -v2c -c public <target> HP-ICF-RELOAD-MIB::hpicfReloadState.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.1.4.20.1.1.1 i <value>
Start monitoring HP ProCurve managed switch (scheduled device reload) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ICF-RELOAD-MIB::hpicfReloadState OID value, configure state conditions and alerts, and monitor any HP ProCurve managed switch (scheduled device reload) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.1 | hpicfCommon | HP-ICF |
| 1.3.6.1.4.1.11.2.14.11.1.4 | hpicfBasic | HP-ICF |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.1.4.20 | hpicfReloadMIB | HP-ICF-RELOAD-MIB |
| 1.3.6.1.4.1.11.2.14.11.1.4.20.1 | hpicfReloadObjects | HP-ICF-RELOAD-MIB |
| 1.3.6.1.4.1.11.2.14.11.1.4.20.1.1 | hpicfReloadState | HP-ICF-RELOAD-MIB |