HP-ICF-DHCPV4-SERVER-MIB

All MIBs › HP-ICF-DHCPV4-SERVER-MIB

Organization: HP Networking

Last Updated: 2015-10-15

Category: Protocol: DHCP, Vendor: HP/HPE

Description: HP ICF SNMP MIB for DHCPv4 server configuration, pool management, and lease tracking on HP ProCurve switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HP-ICF-DHCPV4-SERVER-MIB?

HP-ICF-DHCPV4-SERVER-MIB is an HP-specific MIB (hpicfDhcpv4ServerMIB, under hpSwitch) that models the built-in DHCPv4/BOOTP server function on HP Networking (ProCurve/Aruba) switches. It covers global server configuration (hpicfDhcpv4ServerEnable, hpicfDhcpv4ServerVlanEnable, ping-before-offer parameters), lease-database persistence to a remote TFTP/SFTP file (hpicfDhcpv4ServerDBFile, hpicfDhcpv4ServerDBWriteDelay/Timeout, read/write status), protocol counters for both BOOTP and DHCP message types (hpicfBootpCountRequests/Replies, hpicfDhcpv4CountDiscovers/Offers/Requests/Acks/Naks/Declines/Releases/Informs/BadMsgs), and detailed IP-pool configuration in hpicfDhcpv4ServerPoolTable (network/mask, domain name, lease time, DNS/WINS/default-router/TFTP-server options, free-address high/low thresholds) alongside its companion range, option, dynamic-binding, and IP-conflict tables. It also defines notifications for pool exhaustion (hpicfDhcpv4ServerFreeAddressLow/High), duplicate-address detection, and per-interface lease-limit exhaustion. This is directly a monitoring MIB for DHCP service health on the switch — operators can track free-address exhaustion trending toward zero, rising bad-message or conflict counts, or lease-database write failures well before end users experience DHCP failures, and it depends on IF-MIB (via ifName) and SNMP-FRAMEWORK-MIB. It is deployed on HP switches acting as the DHCP server for their attached VLANs, making it a natural target when searching for the HP-ICF-DHCPV4-SERVER-MIB MIB in a MIB repository.

IPNetwork Monitor allows you to monitor SNMP objects defined in HP-ICF-DHCPV4-SERVER-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

HP Networking / ProCurve switches with integrated DHCPv4 server

Monitoring Examples

An operator polls hpicfDhcpv4ServerPoolFreeAddresses against hpicfDhcpv4ServerPoolLowThreshold for a given pool; free addresses dropping to or below the low threshold (which also triggers a hpicfDhcpv4ServerFreeAddressLow notification) would indicate the subnet is running out of assignable IPv4 addresses.

What Can Be Monitored

DHCP pool free-address counts vs high/low thresholds
DHCPv4 message-type counters (discover/offer/ack/nak/etc.)
BOOTP request/reply counters
lease database write/read status and last-write time
dynamic and static binding tables
IP address conflict detections

Imported Objects

From HP-ICF-FTRCO

VidList

From HP-ICF-OID

hpSwitch

OBJECT-IDENTITY

From IF-MIB

ifName

OBJECT-TYPE

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DateAndTime
DisplayString
MacAddress
RowStatus
TEXTUAL-CONVENTION
TruthValue

How to Use in IPNetwork Monitor

Example using hpicfDhcpServerDBFileWriteAttempts OID:

Select an HP ProCurve/Aruba switch (built-in DHCPv4/BOOTP server) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type hpicfDhcpServerDBFileWriteAttempts into the Find box to locate it in the OID tree, then select it and click OK. It reports the number of attempts that have been made to write the DHCP lease database to a configured file location. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
C32 hpicfBootpCountReplies	1.3.6.1.4.1.11.2.14.11.5.1.99.1.2.2	Counter32	read-only	The number of packets sent that contain a message type of 2 (BOOTREPLY) in the first octet and do not contain option number 53 (DHCP Message Type) in the options.
C32 hpicfBootpCountRequests	1.3.6.1.4.1.11.2.14.11.5.1.99.1.2.1	Counter32	read-only	The number of packets received that contain a message type of 1 (BOOTREQUEST) in the first octet and do not contain option number 53 (DHCP Message Type) in the options.
DAT hpicfDhcpServerDBFileLastWriteTime	1.3.6.1.4.1.11.2.14.11.5.1.99.1.1.8	DateAndTime	read-only	The time that we last successfully wrote our lease database to the server. This object will contain a value of all zeroes if we have not written our lease database since the last reboot.
INT hpicfDhcpServerDBFileReadStatus	1.3.6.1.4.1.11.2.14.11.5.1.99.1.1.6	INTEGER	read-only	This object indicates whether we were able to successfully load the DHCP lease database from the configured location after the last reboot.
C32 hpicfDhcpServerDBFileWriteAttemptsEx	1.3.6.1.4.1.11.2.14.11.5.1.99.1.1.4	Counter32	read-only	Number of attempts that have been made to write the DHCP lease database to a configured file location.
C32 hpicfDhcpServerDBFileWriteFailures	1.3.6.1.4.1.11.2.14.11.5.1.99.1.1.5	Counter32	read-only	Number of times that an attempt to write the DHCP lease database to a configured file location has failed.
INT hpicfDhcpServerDBFileWriteStatus	1.3.6.1.4.1.11.2.14.11.5.1.99.1.1.7	INTEGER	read-only	This object indicates whether the DHCP lease database is currently synchronized with the configured file server. 'notConfigured' means that we have not been configured with a server location. 'delaying' means that we are waiting for the write delay to expire before writing the current database. 'inProgress' means that a lease database transfer is active. 'succeeded' means that all leases in our database have been written to the server. 'failed' means that the last attempt to write our lease database failed.
hpicfDhcpv4BindingEntry	1.3.6.1.4.1.11.2.14.11.5.1.99.1.7.1.1		not-accessible	A set of objects that are used to support DHCPv4 server dynamic lease bindings.
MAC hpicfDhcpv4BindingHardwareAddress	1.3.6.1.4.1.11.2.14.11.5.1.99.1.7.1.1.2	MacAddress	read-only	The ethernet MAC address of a client.
ADR hpicfDhcpv4BindingIpAddress	1.3.6.1.4.1.11.2.14.11.5.1.99.1.7.1.1.1	InetAddressIPv4	not-accessible	The IP address assigned to a specific client.
U32 hpicfDhcpv4BindingLifeTime	1.3.6.1.4.1.11.2.14.11.5.1.99.1.7.1.1.4	Unsigned32	read-only	The life time of the binding entry in seconds. A value of 0xffffffff indicates an infinite life time.
hpicfDhcpv4BindingTable	1.3.6.1.4.1.11.2.14.11.5.1.99.1.7.1		not-accessible	Table that contains objects for DHCPv4 server dynamic lease bindings.
INT hpicfDhcpv4BindingType	1.3.6.1.4.1.11.2.14.11.5.1.99.1.7.1.1.3	INTEGER	read-only	The type of this binding.
hpicfDhcpv4BootpCounters	1.3.6.1.4.1.11.2.14.11.5.1.99.1.2
ADR hpicfDhcpv4ClearBindings	1.3.6.1.4.1.11.2.14.11.5.1.99.1.14	InetAddressIPv4	read-write	When the IP address of this object is set to 0.0.0.0, all IP bindings will be cleared. Specific IP binding will be cleared when IP address is provided. An SNMP 'get' on this object will always return 0.0.0.0 .
ADR hpicfDhcpv4ClearConflictIP	1.3.6.1.4.1.11.2.14.11.5.1.99.1.15	InetAddressIPv4	read-write	When the value of this object is set to 0.0.0.0, all conflicts will be cleared. Specific IP conflict will be cleared when IP address is provided. An SNMP 'get' on this object will always return 0.0.0.0 .
T/F hpicfDhcpv4ClearStatistics	1.3.6.1.4.1.11.2.14.11.5.1.99.1.13	TruthValue	read-write	All the DHCPv4 server and BOOTP statistics will be cleared when this object is set to 'true'. An SNMP 'get' on this object will always return 'false'.
ADR hpicfDhcpv4ConflictIPAddress	1.3.6.1.4.1.11.2.14.11.5.1.99.1.8.1.1.1	InetAddressIPv4	not-accessible	IP address which is duplicated and used by two hosts.
INT hpicfDhcpv4ConflictIPDetectionMethod	1.3.6.1.4.1.11.2.14.11.5.1.99.1.8.1.1.2	INTEGER	read-only	The server detects conflicts using ping. The client detects conflicts using gratuitous Address Resolution Protocol (ARP).
DAT hpicfDhcpv4ConflictIPDetectionTime	1.3.6.1.4.1.11.2.14.11.5.1.99.1.8.1.1.3	DateAndTime	read-only	The system time at which a DHCP address conflict happens. If there has been no change since the last re-initialization of the local system, this object contains the date and time of local system initialization. If there has been no change since the entity was added to the local system, this object contains the date and time of the insertion.
hpicfDhcpv4ConflictIPEntry	1.3.6.1.4.1.11.2.14.11.5.1.99.1.8.1.1		not-accessible	A set of objects that are used to support DHCPv4 server conflicting address (use of the same IP address by two hosts) entry.
hpicfDhcpv4ConflictIPTable	1.3.6.1.4.1.11.2.14.11.5.1.99.1.8.1		not-accessible	Table that contains objects for DHCPv4 server address conflicts.
T/F hpicfDhcpv4ConflictsLog	1.3.6.1.4.1.11.2.14.11.5.1.99.1.16	TruthValue	read-write	Global configuration to enable or disable DHCPv4 server conflicting address logging.
C32 hpicfDhcpv4CountAcks	1.3.6.1.4.1.11.2.14.11.5.1.99.1.3.5	Counter32	read-only	The number of DHCPACK (option 53 with value 5) packets sent.
C32 hpicfDhcpv4CountAutoBindings	1.3.6.1.4.1.11.2.14.11.5.1.99.1.3.11	Counter32	read-only	The number of DHCP server dynamic bindings.
C32 hpicfDhcpv4CountBadMsgs	1.3.6.1.4.1.11.2.14.11.5.1.99.1.3.9	Counter32	read-only	The number of malformed messages.
C32 hpicfDhcpv4CountDeclines	1.3.6.1.4.1.11.2.14.11.5.1.99.1.3.4	Counter32	read-only	The number of DHCPDECLINE (option 53 with value 4) packets received.
C32 hpicfDhcpv4CountDiscovers	1.3.6.1.4.1.11.2.14.11.5.1.99.1.3.1	Counter32	read-only	The number of DHCPDISCOVER (option 53 with value 1) packets received.
hpicfDhcpv4Counters	1.3.6.1.4.1.11.2.14.11.5.1.99.1.3
C32 hpicfDhcpv4CountExpiredOrFreeBindings	1.3.6.1.4.1.11.2.14.11.5.1.99.1.3.13	Counter32	read-only	The number of DHCP server lease bindings that have expired or free.
C32 hpicfDhcpv4CountInforms	1.3.6.1.4.1.11.2.14.11.5.1.99.1.3.8	Counter32	read-only	The number of DHCPINFORM (option 53 with value 8) packets received.
C32 hpicfDhcpv4CountNaks	1.3.6.1.4.1.11.2.14.11.5.1.99.1.3.6	Counter32	read-only	The number of DHCPNACK (option 53 with value 6) packets sent.
C32 hpicfDhcpv4CountOffers	1.3.6.1.4.1.11.2.14.11.5.1.99.1.3.2	Counter32	read-only	The number of DHCPOFFER (option 53 with value 2) packets sent.
C32 hpicfDhcpv4CountPools	1.3.6.1.4.1.11.2.14.11.5.1.99.1.3.10	Counter32	read-only	The number of DHCP server IP pools.
C32 hpicfDhcpv4CountReleases	1.3.6.1.4.1.11.2.14.11.5.1.99.1.3.7	Counter32	read-only	The number of DHCPRELEASE (option 53 with value 7) packets received.
C32 hpicfDhcpv4CountRequests	1.3.6.1.4.1.11.2.14.11.5.1.99.1.3.3	Counter32	read-only	The number of DHCPREQUEST (option 53 with value 3) packets received.
C32 hpicfDhcpv4CountStaticBindings	1.3.6.1.4.1.11.2.14.11.5.1.99.1.3.12	Counter32	read-only	The number of DHCP server manual bindings.
hpicfDhcpv4IpPool	1.3.6.1.4.1.11.2.14.11.5.1.99.1.4
hpicfDhcpv4LeaseDataBase	1.3.6.1.4.1.11.2.14.11.5.1.99.1.1
I32 hpicfDhcpv4PingPktNumber	1.3.6.1.4.1.11.2.14.11.5.1.99.1.11	Integer32	read-write	This object specifies the number of ping packets sent by DHCP server to an IP address before assigning this address to a requesting client.
I32 hpicfDhcpv4PingTimeOut	1.3.6.1.4.1.11.2.14.11.5.1.99.1.12	Integer32	read-write	This object specifies the amount of time the DHCPv4 server must wait before timing out a ping packet.
hpicfDhcpv4PoolDynamicBind	1.3.6.1.4.1.11.2.14.11.5.1.99.1.7
hpicfDhcpv4PoolIpRange	1.3.6.1.4.1.11.2.14.11.5.1.99.1.5
hpicfDhcpv4PoolOption	1.3.6.1.4.1.11.2.14.11.5.1.99.1.6
hpicfDhcpv4ServerBaseGroup	1.3.6.1.4.1.11.2.14.11.5.1.99.2.2.1			Controls the global configuration of the DHCPv4 server.
hpicfDhcpv4ServerBaseGroup1	1.3.6.1.4.1.11.2.14.11.5.1.99.2.2.13			Controls the global configuration of the DHCPv4 server.
hpicfDhcpv4ServerBindingGroup	1.3.6.1.4.1.11.2.14.11.5.1.99.2.2.8			Group of objects to support DHCPv4 server dynamic binding parameters.
hpicfDhcpv4ServerBootpCountersGroup	1.3.6.1.4.1.11.2.14.11.5.1.99.2.2.3			Group of objects that count various BOOTP events.
MAC hpicfDhcpv4ServerClientPhysicalAddress	1.3.6.1.4.1.11.2.14.11.5.1.99.0.4	MacAddress	accessible-for-notify	The hardware address of the client that requested the IP lease.
hpicfDhcpv4ServerCompliance	1.3.6.1.4.1.11.2.14.11.5.1.99.2.1.1			The compliance statement for HP routing switches that support DHCP server.
hpicfDhcpv4ServerCompliance1	1.3.6.1.4.1.11.2.14.11.5.1.99.2.1.2			The compliance statement for HP routing switches that support DHCP server.
hpicfDhcpv4ServerCompliance2	1.3.6.1.4.1.11.2.14.11.5.1.99.2.1.3			The compliance statement for HP routing switches that support DHCP server.
hpicfDhcpv4ServerCompliances	1.3.6.1.4.1.11.2.14.11.5.1.99.2.1
hpicfDhcpv4ServerCompliances1	1.3.6.1.4.1.11.2.14.11.5.1.99.2.3
hpicfDhcpv4ServerConflictGroup	1.3.6.1.4.1.11.2.14.11.5.1.99.2.2.9			Group of objects to support DHCPv4 server conflict parameters.
hpicfDhcpv4ServerConflicts	1.3.6.1.4.1.11.2.14.11.5.1.99.1.8
hpicfDhcpv4ServerConform	1.3.6.1.4.1.11.2.14.11.5.1.99.2
hpicfDhcpv4ServerCounterGroup	1.3.6.1.4.1.11.2.14.11.5.1.99.2.2.4			Group of objects that count various DHCPv4 events.
STR hpicfDhcpv4ServerDBFile	1.3.6.1.4.1.11.2.14.11.5.1.99.1.1.1	SnmpAdminString	read-write	A location to store the lease database, to retrieve it after a reboot. The location must be given in the form of a URL as defined in RFC 2396. The allowed character sets and the encoding rules defined in RFC 2396 section 2 apply.
U32 hpicfDhcpv4ServerDBFTPort	1.3.6.1.4.1.11.2.14.11.5.1.99.1.1.9	Unsigned32	read-write	A location to store the port value of the FT Server. The default port value will be 69 for TFTP and 22 for SFTP
STR hpicfDhcpv4ServerDBSFTPPassword	1.3.6.1.4.1.11.2.14.11.5.1.99.1.1.11	SnmpAdminString	read-write	A location to store the Password of the SFTP Server.
STR hpicfDhcpv4ServerDBSFTPUsername	1.3.6.1.4.1.11.2.14.11.5.1.99.1.1.10	SnmpAdminString	read-write	A location to store the Username of the SFTP Server. The default value of username is root.
INT hpicfDhcpv4ServerDBValidateSFTPServer	1.3.6.1.4.1.11.2.14.11.5.1.99.1.1.12	INTEGER	read-write	This object sets the validate-sftp-server flag. When enabled, the user must login to the SFTP server to verify and accept the public key of the server. When disabled, the public key is accepted automatically.
U32 hpicfDhcpv4ServerDBWriteDelay	1.3.6.1.4.1.11.2.14.11.5.1.99.1.1.2	Unsigned32	read-write	The number of seconds to delay writing the DHCP lease database file after a database change. This potentially allows grouping multiple database changes into a single write. The default is 300 seconds.
U32 hpicfDhcpv4ServerDBWriteTimeout	1.3.6.1.4.1.11.2.14.11.5.1.99.1.1.3	Unsigned32	read-write	The number of seconds to wait for the database file transfer to finish before giving up and declaring a failure. A value of 0 means continue retrying indefinitely.
STR hpicfDhcpv4ServerDefaultRouter	1.3.6.1.4.1.11.2.14.11.5.1.99.1.4.1.1.13	DisplayString	read-create	The default routers that are available to a DHCP client. One IP address is required and supports up to eight IP addresses. Each IP address is separated by a comma and the list is terminated by a semicolon.
STR hpicfDhcpv4ServerDNSServerAddress	1.3.6.1.4.1.11.2.14.11.5.1.99.1.4.1.1.11	DisplayString	read-create	The IP address of DNS IP servers that are available to a DHCP client. One IP address is required and supports up to eight IP addresses. Each IP address is separated by a comma and the list is terminated by a semicolon.
NTF hpicfDhcpv4ServerDuplicateAddress	1.3.6.1.4.1.11.2.14.11.5.1.99.0.7			This notification signifies that a duplicate IPv4 address has been detected. The DHCP server can detect this condition through the ping-before-offer mechanism. Alternatively, the client may have sent a DHCPDECLINE back to the server; this is assumed to be the result of the client detecting that the address was in use. In either case, the DHCP server marks the IPv4 address as unavailable for leasing to clients. The hpicfDhcpv4ServerNotifyClientOrServerDetected object indicates whether the client or server detected this condition.
INT hpicfDhcpv4ServerEnable	1.3.6.1.4.1.11.2.14.11.5.1.99.1.10	INTEGER	read-write	Global configuration to enable or disable DHCPv4 server on the device. The 'disableWithClearConfig' enum disables DHCPv4 Server along with removing all the DHCPv4 Server related configuration.
NTF hpicfDhcpv4ServerFreeAddressHigh	1.3.6.1.4.1.11.2.14.11.5.1.99.0.6			This notification signifies that the number of available IPv4 addresses for a particular shared network has risen above the value of hpicfDhcpv4ServerPoolHighThreshold for that shared network.
NTF hpicfDhcpv4ServerFreeAddressLow	1.3.6.1.4.1.11.2.14.11.5.1.99.0.5			This notification signifies that the number of available IPv4 addresses for a particular shared network has fallen below the value of hpicfDhcpv4ServerPoolLowThreshold for that shared network.
hpicfDhcpv4ServerGroups	1.3.6.1.4.1.11.2.14.11.5.1.99.2.2
NTF hpicfDhcpv4ServerIfLeaseLimitExceeded	1.3.6.1.4.1.11.2.14.11.5.1.99.0.8			This notification indicates that there are no more IP leases available to offer on the receiving interface.
hpicfDhcpv4ServerLeaseDataBaseGroup	1.3.6.1.4.1.11.2.14.11.5.1.99.2.2.2			Group of objects to support lease database parameters.
hpicfDhcpv4ServerLeaseDataBaseGroup1	1.3.6.1.4.1.11.2.14.11.5.1.99.2.2.12			Group of objects to support lease database parameters.
hpicfDhcpv4ServerMIB	1.3.6.1.4.1.11.2.14.11.5.1.99			This MIB module is for entities implementing the server side of the Bootstrap Protocol (BOOTP) and the Dynamic Host Configuration protocol (DHCP) for Internet Protocol version 4(IPv4).
STR hpicfDhcpv4ServerNetBIOSNameServer	1.3.6.1.4.1.11.2.14.11.5.1.99.1.4.1.1.12	DisplayString	read-write	The NetBIOS WINS servers that are available to a DHCP client. One IP address is required and supports up to eight IP addresses. Each IP address is separated by a comma and the list is terminated by a semicolon.
hpicfDhcpv4ServerNotificationsGroup	1.3.6.1.4.1.11.2.14.11.5.1.99.2.2.11			Group of notifications.
hpicfDhcpv4ServerNotifs	1.3.6.1.4.1.11.2.14.11.5.1.99.0
INT hpicfDhcpv4ServerNotifyClientOrServerDetected	1.3.6.1.4.1.11.2.14.11.5.1.99.0.3	INTEGER	accessible-for-notify	Duplicate IPv4 addresses can be detected either by a server, using an ICMP ECHO message, or by a client using ARP. This object is set by the server to (1) if the client used DHCPDECLINE to mark the offered address as in use, or to (2) if the server discovered the address in use by some client before offering it.
ADR hpicfDhcpv4ServerNotifyDuplicateIpAddr	1.3.6.1.4.1.11.2.14.11.5.1.99.0.1	InetAddressIPv4	accessible-for-notify	The IPv4 address found to be a duplicate. Duplicates are detected by servers, which issue an ICMP ECHOREQUEST prior to offering an IPv4 address lease, or by a client issuing a gratuitous ARP message and reported through a DHCPDECLINE message.
MAC hpicfDhcpv4ServerNotifyDuplicateMac	1.3.6.1.4.1.11.2.14.11.5.1.99.0.2	MacAddress	accessible-for-notify	The offending MAC address which caused a duplicate IPv4 address to be detected, if captured by the server, else 00-00-00-00-00-00.
hpicfDhcpv4ServerNotifyObjectsGroup	1.3.6.1.4.1.11.2.14.11.5.1.99.2.2.10			Group of objects required for notifications.
hpicfDhcpv4ServerObjects	1.3.6.1.4.1.11.2.14.11.5.1.99.1
INT hpicfDhcpv4ServerOperStatus	1.3.6.1.4.1.11.2.14.11.5.1.99.1.19	INTEGER	read-only	Specifies operational status of DHCPv4 protocol.
hpicfDhcpv4ServerOptionGroup	1.3.6.1.4.1.11.2.14.11.5.1.99.2.2.7			Group of objects to support DHCPv4 server raw option parameters.
STR hpicfDhcpv4ServerPoolBootFile	1.3.6.1.4.1.11.2.14.11.5.1.99.1.4.1.1.7	DisplayString	read-create	The name of the file that is used as a boot image.
STR hpicfDhcpv4ServerPoolDomainName	1.3.6.1.4.1.11.2.14.11.5.1.99.1.4.1.1.4	DisplayString	read-create	The domain name for the client if the server allocates the address for the client from this pool.
hpicfDhcpv4ServerPoolEntry	1.3.6.1.4.1.11.2.14.11.5.1.99.1.4.1.1		not-accessible	A set of objects that are used to support DHCPv4 server pool information.
U32 hpicfDhcpv4ServerPoolFreeAddresses	1.3.6.1.4.1.11.2.14.11.5.1.99.1.4.1.1.10	Unsigned32	read-only	The number of IPv4 addresses which are available within this pool.
hpicfDhcpv4ServerPoolGroup	1.3.6.1.4.1.11.2.14.11.5.1.99.2.2.5			Group of objects to support DHCPv4 server pool parameters.
U32 hpicfDhcpv4ServerPoolHighThreshold	1.3.6.1.4.1.11.2.14.11.5.1.99.1.4.1.1.9	Unsigned32	read-only	The high threshold for available free addresses in this pool. If a dhcpv4ServerFreeAddressLow event was generated for this pool, and the value for available free addresses has exceeded the value of hpicfDhcpv4ServerPoolHighThreshold, then a hpicfDhcpv4ServerFreeAddressHigh event will be generated. No more hpicfDhcpv4ServerFreeAddressHigh events will be generated for this pool during this execution of the DHCP server until the value for available free addresses becomes equal to or less than the value of hpicfDhcpv4ServerPoolLowThreshold.
T/F hpicfDhcpv4ServerPoolIsAuthoritative	1.3.6.1.4.1.11.2.14.11.5.1.99.1.4.1.1.19	TruthValue	read-create	This object indicates whether this DHCP server is the sole authority for the IP subnet configured in this pool. When configured as authoriative, the server will actively respond with DHCP ACK or NACK appropriately for all the received DHCP REQUEST and INFORM packets from the clients belonging to this subnet. DHCP INFORM packets received from the clients on a non-authoritative pool will always be ignored.
U32 hpicfDhcpv4ServerPoolLeaseTime	1.3.6.1.4.1.11.2.14.11.5.1.99.1.4.1.1.6	Unsigned32	read-create	The number of seconds remaining until this DHCP lease times out. A value of 0xffffffff indicates an infinite lease.
U32 hpicfDhcpv4ServerPoolLowThreshold	1.3.6.1.4.1.11.2.14.11.5.1.99.1.4.1.1.8	Unsigned32	read-only	The low threshold for available free addresses in this pool. If the value for available free addresses in this pool becomes equal to or less than this value, a dhcpv4ServerFreeAddressLow event is generated for this pool. No more dhcpv4ServerFreeAddressLow events will be generated for this subnet during this execution of the DHCP server until the value for available free addresses has exceeded the value of hpicfDhcpv4ServerPoolHighThreshold.
STR hpicfDhcpv4ServerPoolName	1.3.6.1.4.1.11.2.14.11.5.1.99.1.4.1.1.1	DisplayString	not-accessible	The name of this pool entry.
INT hpicfDhcpv4ServerPoolNetBIOSNodeType	1.3.6.1.4.1.11.2.14.11.5.1.99.1.4.1.1.5	INTEGER	read-create	The NetBIOS node type for a Microsoft DHCP client.
ADR hpicfDhcpv4ServerPoolNetworkAddress	1.3.6.1.4.1.11.2.14.11.5.1.99.1.4.1.1.2	InetAddressIPv4	read-create	The network address of this DHCP pool entry.
ADR hpicfDhcpv4ServerPoolNetworkAddressMask	1.3.6.1.4.1.11.2.14.11.5.1.99.1.4.1.1.3	InetAddressIPv4	read-create	The network address mask of this DHCP pool entry.
U32 hpicfDhcpv4ServerPoolOptionCode	1.3.6.1.4.1.11.2.14.11.5.1.99.1.6.1.1.1	Unsigned32	not-accessible	The DHCP option code as per RFC 2132.
STR hpicfDhcpv4ServerPoolOptionData	1.3.6.1.4.1.11.2.14.11.5.1.99.1.6.1.1.3	DisplayString	read-write	This specifies data in dotted hexadecimal or ASCII character string or IP addresses format based on hpicfDhcpv4ServerPoolOptionType value. Each byte in hexadecimal character strings is two hexadecimal digits. Each byte can be separated by a period, colon, or white space. ASCII strings that contain white spaces must be enclosed within quotation marks. One IP address is required and supports up to eight IP addresses. Each IP address is separated by a comma and the list is terminated by a semicolon.
hpicfDhcpv4ServerPoolOptionEntry	1.3.6.1.4.1.11.2.14.11.5.1.99.1.6.1.1		not-accessible	A set of objects that are used to support DHCPv4 server options.
ROW hpicfDhcpv4ServerPoolOptionStatus	1.3.6.1.4.1.11.2.14.11.5.1.99.1.6.1.1.4	RowStatus	read-create	RowStatus for this table.
hpicfDhcpv4ServerPoolOptionTable	1.3.6.1.4.1.11.2.14.11.5.1.99.1.6.1		not-accessible	Table that contains objects for DHCPv4 Server options.
INT hpicfDhcpv4ServerPoolOptionType	1.3.6.1.4.1.11.2.14.11.5.1.99.1.6.1.1.2	INTEGER	read-write	This specifies the type of pool option data.
ROW hpicfDhcpv4ServerPoolStatus	1.3.6.1.4.1.11.2.14.11.5.1.99.1.4.1.1.20	RowStatus	read-create	RowStatus for this table.
hpicfDhcpv4ServerPoolTable	1.3.6.1.4.1.11.2.14.11.5.1.99.1.4.1		not-accessible	Table that contains objects for DHCPv4 server pool information.
ADR hpicfDhcpv4ServerRangeEndAddress	1.3.6.1.4.1.11.2.14.11.5.1.99.1.5.1.1.2	InetAddressIPv4	read-create	The last address in the range. The value of hpicfDhcpv4ServerRangeEndAddress must be greater than or equal to the value of hpicfDhcpv4ServerRangeStartAddress and should be within the pool subnet.
hpicfDhcpv4ServerRangeEntry	1.3.6.1.4.1.11.2.14.11.5.1.99.1.5.1.1		not-accessible	A set of objects that are used to support pool IP range.
hpicfDhcpv4ServerRangeGroup	1.3.6.1.4.1.11.2.14.11.5.1.99.2.2.6			Group of objects to support DHCPv4 server IP range parameters.
ADR hpicfDhcpv4ServerRangeStartAddress	1.3.6.1.4.1.11.2.14.11.5.1.99.1.5.1.1.1	InetAddressIPv4	not-accessible	The start address of the range. The value of hpicfDhcpv4ServerRangeStartAddress must be less than or equal to the value of hpicfDhcpv4ServerRangeEndAddress and should be within the pool subnet.
ROW hpicfDhcpv4ServerRangeStatus	1.3.6.1.4.1.11.2.14.11.5.1.99.1.5.1.1.3	RowStatus	read-create	RowStatus for this table.
hpicfDhcpv4ServerRangeTable	1.3.6.1.4.1.11.2.14.11.5.1.99.1.5.1		not-accessible	Table that contains objects for the range of IP addresses in the pool.
MAC hpicfDhcpv4ServerStaticHardwareAddress	1.3.6.1.4.1.11.2.14.11.5.1.99.1.4.1.1.18	MacAddress	read-create	The ethernet MAC address of a client.
ADR hpicfDhcpv4ServerStaticIpAddress	1.3.6.1.4.1.11.2.14.11.5.1.99.1.4.1.1.16	InetAddressIPv4	read-create	The manual IP address of this DHCP pool entry.
ADR hpicfDhcpv4ServerStaticIpAddressMask	1.3.6.1.4.1.11.2.14.11.5.1.99.1.4.1.1.17	InetAddressIPv4	read-create	The manual IP address mask of this DHCP pool entry.
ADR hpicfDhcpv4ServerTFTPServerIpAddress	1.3.6.1.4.1.11.2.14.11.5.1.99.1.4.1.1.15	InetAddressIPv4	read-create	The TFTP server IP address of this DHCP pool entry.
STR hpicfDhcpv4ServerTFTPServerName	1.3.6.1.4.1.11.2.14.11.5.1.99.1.4.1.1.14	DisplayString	read-create	The TFTP server name of this DHCP pool entry.
VID hpicfDhcpv4ServerVlanEnable	1.3.6.1.4.1.11.2.14.11.5.1.99.1.18	VidList	read-write	Specifies the VLANs on which DHCPv4 server is enabled.
T/F hpicfDhcpv4TrapEnable	1.3.6.1.4.1.11.2.14.11.5.1.99.1.17	TruthValue	read-write	This object will enables or disables the DHCPv4 server traps.

RFC description

MIB for DHCPv4 server implementation including BOOTP, address pools, and lease management.

Start monitoring HP ProCurve/Aruba switch (built-in DHCPv4/BOOTP server) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HP-ICF-DHCPV4-SERVER-MIB