HP-ICF-DHCPV4-SERVER-MIB :: hpicfDhcpv4ServerPoolOptionData

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsHP-ICF-DHCPV4-SERVER-MIBhpicfDhcpv4ServerPoolOptionData

hpicfDhcpv4ServerPoolOptionData

Module: HP-ICF-DHCPV4-SERVER-MIB

OID (symbolic): HP-ICF-DHCPV4-SERVER-MIB::hpicfDhcpv4ServerPoolOptionData

OID (numeric): 1.3.6.1.4.1.11.2.14.11.5.1.99.1.6.1.1.3

Node type: OBJECT-TYPE

Type: DisplayString

Access: read-write

Description: This specifies data in dotted hexadecimal or ASCII character string or IP addresses format based on hpicfDhcpv4ServerPoolOptionType value. Each byte in hexadecimal character strings is two hexadecimal digits. Each byte can be separated by a period, colon, or white space. ASCII strings that contain white spaces must be enclosed within quotation marks. One IP address is required and supports up to eight IP addresses. Each IP address is separated by a comma and the list is terminated by a semicolon.

What is hpicfDhcpv4ServerPoolOptionData?

This OID holds the actual data for a custom DHCP option, formatted as hex, ASCII, or comma-separated IP addresses depending on hpicfDhcpv4ServerPoolOptionType. An admin sets this to supply vendor-specific or less-common DHCP option values not covered by the pool's dedicated fields (like DNS or router address).

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.99.1.6.1.1.3
snmpwalk -v2c -c public <target> HP-ICF-DHCPV4-SERVER-MIB::hpicfDhcpv4ServerPoolOptionData

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.99.1.6.1.1.3.1
snmpget -v2c -c public <target> HP-ICF-DHCPV4-SERVER-MIB::hpicfDhcpv4ServerPoolOptionData.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.5.1.99.1.6.1.1.3.1 s <value>

Start monitoring HP ProCurve/Aruba switch (built-in DHCPv4/BOOTP server) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ICF-DHCPV4-SERVER-MIB::hpicfDhcpv4ServerPoolOptionData OID value, configure state conditions and alerts, and monitor any HP ProCurve/Aruba switch (built-in DHCPv4/BOOTP server) from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.11hpCLJ8500-MIB
1.3.6.1.4.1.11.2nmCLJ8500-MIB
1.3.6.1.4.1.11.2.14icfCONFIG-MIB
1.3.6.1.4.1.11.2.14.11hpicfObjectsCONFIG-MIB
1.3.6.1.4.1.11.2.14.11.5hpicfSwitchCONFIG-MIB
1.3.6.1.4.1.11.2.14.11.5.1hpSwitchCONFIG-MIB
Numeric OIDNameModule
1.3.6.1.4.1.11.2.14.11.5.1.99hpicfDhcpv4ServerMIBHP-ICF-DHCPV4-SERVER-MIB
1.3.6.1.4.1.11.2.14.11.5.1.99.1hpicfDhcpv4ServerObjectsHP-ICF-DHCPV4-SERVER-MIB
1.3.6.1.4.1.11.2.14.11.5.1.99.1.6hpicfDhcpv4PoolOptionHP-ICF-DHCPV4-SERVER-MIB
1.3.6.1.4.1.11.2.14.11.5.1.99.1.6.1hpicfDhcpv4ServerPoolOptionTableHP-ICF-DHCPV4-SERVER-MIB
1.3.6.1.4.1.11.2.14.11.5.1.99.1.6.1.1hpicfDhcpv4ServerPoolOptionEntryHP-ICF-DHCPV4-SERVER-MIB
1.3.6.1.4.1.11.2.14.11.5.1.99.1.6.1.1.3hpicfDhcpv4ServerPoolOptionDataHP-ICF-DHCPV4-SERVER-MIB