HP-ICF-DHCPV4-SERVER-MIB :: hpicfDhcpv4ServerPoolHighThreshold

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsHP-ICF-DHCPV4-SERVER-MIBhpicfDhcpv4ServerPoolHighThreshold

hpicfDhcpv4ServerPoolHighThreshold

Module: HP-ICF-DHCPV4-SERVER-MIB

OID (symbolic): HP-ICF-DHCPV4-SERVER-MIB::hpicfDhcpv4ServerPoolHighThreshold

OID (numeric): 1.3.6.1.4.1.11.2.14.11.5.1.99.1.4.1.1.9

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-only

Description: The high threshold for available free addresses in this pool. If a dhcpv4ServerFreeAddressLow event was generated for this pool, and the value for available free addresses has exceeded the value of hpicfDhcpv4ServerPoolHighThreshold, then a hpicfDhcpv4ServerFreeAddressHigh event will be generated. No more hpicfDhcpv4ServerFreeAddressHigh events will be generated for this pool during this execution of the DHCP server until the value for available free addresses becomes equal to or less than the value of hpicfDhcpv4ServerPoolLowThreshold.

What is hpicfDhcpv4ServerPoolHighThreshold?

This OID sets the free-address count above which, after a low-threshold event fired, the server sends a hpicfDhcpv4ServerFreeAddressHigh notification for this pool. Together with the low threshold it forms a hysteresis band that prevents repeated flapping alerts around a single boundary value.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.99.1.4.1.1.9
snmpwalk -v2c -c public <target> HP-ICF-DHCPV4-SERVER-MIB::hpicfDhcpv4ServerPoolHighThreshold

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.99.1.4.1.1.9.1
snmpget -v2c -c public <target> HP-ICF-DHCPV4-SERVER-MIB::hpicfDhcpv4ServerPoolHighThreshold.1

Start monitoring HP ProCurve/Aruba switch (built-in DHCPv4/BOOTP server) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP-ICF-DHCPV4-SERVER-MIB::hpicfDhcpv4ServerPoolHighThreshold OID value, configure state conditions and alerts, and monitor any HP ProCurve/Aruba switch (built-in DHCPv4/BOOTP server) from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.11hpCLJ8500-MIB
1.3.6.1.4.1.11.2nmCLJ8500-MIB
1.3.6.1.4.1.11.2.14icfCONFIG-MIB
1.3.6.1.4.1.11.2.14.11hpicfObjectsCONFIG-MIB
1.3.6.1.4.1.11.2.14.11.5hpicfSwitchCONFIG-MIB
1.3.6.1.4.1.11.2.14.11.5.1hpSwitchCONFIG-MIB
Numeric OIDNameModule
1.3.6.1.4.1.11.2.14.11.5.1.99hpicfDhcpv4ServerMIBHP-ICF-DHCPV4-SERVER-MIB
1.3.6.1.4.1.11.2.14.11.5.1.99.1hpicfDhcpv4ServerObjectsHP-ICF-DHCPV4-SERVER-MIB
1.3.6.1.4.1.11.2.14.11.5.1.99.1.4hpicfDhcpv4IpPoolHP-ICF-DHCPV4-SERVER-MIB
1.3.6.1.4.1.11.2.14.11.5.1.99.1.4.1hpicfDhcpv4ServerPoolTableHP-ICF-DHCPV4-SERVER-MIB
1.3.6.1.4.1.11.2.14.11.5.1.99.1.4.1.1hpicfDhcpv4ServerPoolEntryHP-ICF-DHCPV4-SERVER-MIB
1.3.6.1.4.1.11.2.14.11.5.1.99.1.4.1.1.9hpicfDhcpv4ServerPoolHighThresholdHP-ICF-DHCPV4-SERVER-MIB