HOTWIRE-MSDSL-INTERFACE-MIB :: msdslFracPortIfIndex

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsHOTWIRE-MSDSL-INTERFACE-MIBmsdslFracPortIfIndex

msdslFracPortIfIndex

Module: HOTWIRE-MSDSL-INTERFACE-MIB

OID (symbolic): HOTWIRE-MSDSL-INTERFACE-MIB::msdslFracPortIfIndex

OID (numeric): 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.28.1.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: An index value that uniquely identifies the interface to which this entry is mapped. The interface identified by a particular value of this index is the same interface as identified by the same value of an ifIndex object instance If no interface is currently using the Time Slot identified by msdslFracPortTS, then this value should be zero. This is used to unassign the Time Slot. If a single interface occupies more than one time slot, then its ifIndex value is found in multiple time slots (i.e., there are multiple entries in table with the same msdslFracPortIfIndex value).

What is msdslFracPortIfIndex?

The ifIndex of the interface that the time slot identified by msdslFracPortTS is mapped to; setting it to zero unassigns that time slot. If a single interface spans multiple time slots, its ifIndex value will appear in more than one row of this cross-connect table.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.28.1.3
snmpwalk -v2c -c public <target> HOTWIRE-MSDSL-INTERFACE-MIB::msdslFracPortIfIndex

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.28.1.3.1
snmpget -v2c -c public <target> HOTWIRE-MSDSL-INTERFACE-MIB::msdslFracPortIfIndex.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.28.1.3.1 i <value>

Start monitoring Paradyne HotWire DSL access equipment (MSDSL interface) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HOTWIRE-MSDSL-INTERFACE-MIB::msdslFracPortIfIndex OID value, configure state conditions and alerts, and monitor any Paradyne HotWire DSL access equipment (MSDSL interface) from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1795pdynPDN-HEADER-MIB
1.3.6.1.4.1.1795.2pdn_mgmtPDN-HEADER-MIB
1.3.6.1.4.1.1795.2.24paradynePDN-HEADER-MIB
1.3.6.1.4.1.1795.2.24.2pdn_commonPDN-HEADER-MIB
1.3.6.1.4.1.1795.2.24.2.6pdn_interfacesPDN-HEADER-MIB
1.3.6.1.4.1.1795.2.24.2.6.15pdnmsdslPDN-HEADER-MIB
Numeric OIDNameModule
1.3.6.1.4.1.1795.2.24.2.6.15.1msdslDeviceHOTWIRE-MSDSL-INTERFACE-MIB
1.3.6.1.4.1.1795.2.24.2.6.15.1.15msdslConfigurationHOTWIRE-MSDSL-INTERFACE-MIB
1.3.6.1.4.1.1795.2.24.2.6.15.1.15.28msdslFracTableHOTWIRE-MSDSL-INTERFACE-MIB
1.3.6.1.4.1.1795.2.24.2.6.15.1.15.28.1msdslFracEntryHOTWIRE-MSDSL-INTERFACE-MIB
1.3.6.1.4.1.1795.2.24.2.6.15.1.15.28.1.3msdslFracPortIfIndexHOTWIRE-MSDSL-INTERFACE-MIB