PDN-CP-IWF-MIB

All MIBs › PDN-CP-IWF-MIB

Organization: Paradyne Networks MIB Working Group Other information about group editing the MIB

Last Updated: 2004-12-02

Category: DSL and Broadband

Description: Manages control-plane interworking function objects for protocol bridging between ATM and Ethernet on Paradyne access devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is PDN-CP-IWF-MIB?

PDN-CP-IWF-MIB is a Paradyne enterprise MIB for managing multiple Customer Premises Interworking Functions (CP-IWF) supporting Loop Emulation Service (LES) on Paradyne DSLAM products, filling a gap in the ATM Forum's af-vmoa-0145.000 recommendation which could not manage multiple CP-IWFs per device. It exposes a table of CP-IWF instances, each tied to an ifIndex, region, and configuration attributes including number of POTS lines assigned, gateway protocol, ATM Broadband Loop Emulation Service (BLES) capability, and SSCS predefined profile. Its monitoring role centers on service configuration/status for voice-over-DSL loop emulation -- confirming each CP-IWF instance is active, has the expected number of POTS lines provisioned, and is using the intended gateway protocol and ATM adaptation profile, critical to keeping emulated voice circuits working correctly. It is explicitly meant to be used alongside the standard ifTable from RFC 2863 (IF-MIB), tying each CP-IWF instance to a real interface index, and builds on ATM Forum LES/CP-IWF concepts. It is deployed on Paradyne DSLAM products delivering multiple emulated voice/POTS lines over DSL loops. Engineers can download the PDN-CP-IWF-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in PDN-CP-IWF-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Paradyne DSLAM with Loop Emulation Service (LES)

Monitoring Examples

An operator walks pdnCpIwfTable/Entry (indexed by pdnCpIwfIndex) to check pdnCpIwfIfIndex ties correctly to the expected physical interface and that pdnCpIwfRowStatus shows the instance active. pdnCpIwfNumPotsAssigned confirms the number of provisioned POTS lines matches subscriber orders, and pdnCpIwfGatewayProtocol/pdnCpIwfAtmBLESCapability confirm the correct voice gateway signaling and ATM loop-emulation capability are configured. pdnCpIwfSscsPredefinedProfile lets an admin verify the ATM adaptation-layer profile applied to a given CP-IWF instance.

What Can Be Monitored

CP-IWF instance status and interface mapping
number of POTS lines assigned
gateway protocol configuration
ATM BLES capability
SSCS profile assignment

Imported Objects

From IF-MIB

InterfaceIndex
ifIndex	OBJECT-TYPE

From PDN-HEADER-MIB

pdnCpIwf

OBJECT-IDENTITY

From PDN-TC

SwitchState

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString
RowStatus
TEXTUAL-CONVENTION
TruthValue

How to Use in IPNetwork Monitor

Example using pdnCpIwfAal2CpsRxPkts OID:

Select a Paradyne DSLAM with Loop Emulation Service (LES) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type pdnCpIwfAal2CpsRxPkts into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the number of CPS Received. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
C32 pdnCpIwfAal2CpsCidErrors	1.3.6.1.4.1.1795.2.24.2.50.1.1.3.1.1.12	Counter32	read-only	Number of errors encountered as specified in Table 6/I.363.2 (errnum=9)
C32 pdnCpIwfAal2CpsHecErrors	1.3.6.1.4.1.1795.2.24.2.50.1.1.3.1.1.7	Counter32	read-only	Number of errors encountered as specified in Table 6/I.363.2 (errnum=4)
C32 pdnCpIwfAal2CpsHecOverlapErrors	1.3.6.1.4.1.1795.2.24.2.50.1.1.3.1.1.10	Counter32	read-only	Number of errors encountered as specified in Table 6/I.363.2 (errnum=7)
C32 pdnCpIwfAal2CpsOsfErrors	1.3.6.1.4.1.1795.2.24.2.50.1.1.3.1.1.6	Counter32	read-only	Number of errors encountered as specified in Table 6/I.363.2 (errnum=3)
C32 pdnCpIwfAal2CpsOsfMismatchErrors	1.3.6.1.4.1.1795.2.24.2.50.1.1.3.1.1.5	Counter32	read-only	Number of errors encountered as specified in Table 6/I.363.2 (errnum=2)
C32 pdnCpIwfAal2CpsOversizeSduErrors	1.3.6.1.4.1.1795.2.24.2.50.1.1.3.1.1.8	Counter32	read-only	Number of errors encountered as specified in Table 6/I.363.2 (errnum=5)
C32 pdnCpIwfAal2CpsParityErrors	1.3.6.1.4.1.1795.2.24.2.50.1.1.3.1.1.3	Counter32	read-only	Number of errors encountered as specified in Table 6/I.363.2 (errnum=0)
C32 pdnCpIwfAal2CpsReassemblyErrors	1.3.6.1.4.1.1795.2.24.2.50.1.1.3.1.1.9	Counter32	read-only	Number of errors encountered as specified in Table 6/I.363.2 (errnum=6)
C32 pdnCpIwfAal2CpsRxPktsEx	1.3.6.1.4.1.1795.2.24.2.50.1.1.3.1.1.1	Counter32	read-only	Number of CPS Received.
C32 pdnCpIwfAal2CpsSeqNumErrors	1.3.6.1.4.1.1795.2.24.2.50.1.1.3.1.1.4	Counter32	read-only	Number of errors encountered as specified in Table 6/I.363.2 (errnum=1)
C32 pdnCpIwfAal2CpsTxPkts	1.3.6.1.4.1.1795.2.24.2.50.1.1.3.1.1.2	Counter32	read-only	Number of CPS Transmitted.
C32 pdnCpIwfAal2CpsUuiErrors	1.3.6.1.4.1.1795.2.24.2.50.1.1.3.1.1.11	Counter32	read-only	Number of errors encountered as specified in Table 6/I.363.2 (errnum=8)
pdnCpIwfAal2StatsEntry	1.3.6.1.4.1.1795.2.24.2.50.1.1.3.1.1		not-accessible	Contained AAL2 stats for a VCC defined on this cpIwf.
pdnCpIwfAal2StatsGroup	1.3.6.1.4.1.1795.2.24.2.50.1.2.2.3			Aal2 stats per CpIwf
pdnCpIwfAal2StatsTable	1.3.6.1.4.1.1795.2.24.2.50.1.1.3.1		not-accessible	This table is used to maintain AAL2-Customer Part Sublayer (CPS) statistics per VCC associated to each CpIwf port. An entry in this table represents the AAL2 statistics maintained for this circuit.
CON pdnCpIwfAtmBLESCapability	1.3.6.1.4.1.1795.2.24.2.50.1.1.1.4.1.6	ControlProtocol	read-only	This object indicates whether this CP-IWF supports the ATM Forum BLES standard with CCS and ELCP and EOC.
pdnCpIwfConfigObjects	1.3.6.1.4.1.1795.2.24.2.50.1.1.1
pdnCpIwfEntry	1.3.6.1.4.1.1795.2.24.2.50.1.1.1.4.1		not-accessible	An entry in the Cp-Iwf configuration table.
GAT pdnCpIwfGatewayProtocol	1.3.6.1.4.1.1795.2.24.2.50.1.1.1.4.1.5	GatewayProtocol	read-create	This is the Gateway protocol configured for this CPIWF.
pdnCpIwfGeneralConfigGroup	1.3.6.1.4.1.1795.2.24.2.50.1.2.2.1			General Configuration of CpIwf ports
pdnCpIwfGeneralConfigGroupV2	1.3.6.1.4.1.1795.2.24.2.50.1.2.2.5			Configuration of general parameters related to the CpIwf. This group superseeds the pdnCpIwfGeneralConfigGroup which was splitted in two groups.
pdnCpIwfIADConfigGroupV2	1.3.6.1.4.1.1795.2.24.2.50.1.2.2.6			Configuration of each CpIwf interfaces in the device. This group superseeds the pdnCpIwfGeneralConfigGroup which was splitted in two groups. This group is now deprecated by pdnCpIwfPotsPortConfigGroupV3.
pdnCpIwfIADConfigGroupV3	1.3.6.1.4.1.1795.2.24.2.50.1.2.2.10			Configuration of each CpIwf interfaces in the device. This group superseeds the pdnCpIwfGeneralConfigGroupV2.
NUM pdnCpIwfIfIndex	1.3.6.1.4.1.1795.2.24.2.50.1.1.1.4.1.2	InterfaceIndex	read-only	This object displays the interface index from the ifTable assigned by the SNMP agent upon creation of this CPIWF.
I32 pdnCpIwfIndex	1.3.6.1.4.1.1795.2.24.2.50.1.1.1.4.1.1	Integer32	not-accessible	This object is an arbitrary index assigned by the agent. When a client wishes to add an entry to this pdnCpIwfTable, first it must do a get to the pdnCpIwfIndexNext and use the returned value as the table's index for the new entry.
I32 pdnCpIwfIndexNext	1.3.6.1.4.1.1795.2.24.2.50.1.1.1.2	Integer32	read-only	This object contains an appropriate value to be used for pdnCpIwfIndex when creating entries in the pdnCpIwfTable. The value 0 indicates that no unassigned entries are available. To obtain the pdnCpIwfIndexNext value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse.
I32 pdnCpIwfJitterBufferLength	1.3.6.1.4.1.1795.2.24.2.50.1.1.1.4.1.8	Integer32	read-write	This object allows the configuration of the jitter buffer length.
pdnCpIwfMappingEntry	1.3.6.1.4.1.1795.2.24.2.50.1.1.1.5.1		not-accessible	Each row describes the mapping of one ifIndex to a pdnCpIwfIndex.
I32 pdnCpIwfMappingIndex	1.3.6.1.4.1.1795.2.24.2.50.1.1.1.5.1.1	Integer32	read-only	The index assigned to the Cp-Iwf's interface upon creation.
pdnCpIwfMappingTable	1.3.6.1.4.1.1795.2.24.2.50.1.1.1.5		not-accessible	A table mapping the 'ifIndex' values of 'pdnCpIwfIfIndex' to the 'pdnCpIwfIndex' values of the corresponding CpIwf.
pdnCpIwfMIB	1.3.6.1.4.1.1795.2.24.2.50.1			This module defines a portion of the management information base (MIB) for managing multiple Loop Emulation Service (LES) Customer Premises Interworking Functions (CP-IWF). The mib recommended by the ATM forum (af-vmoa-0145.000) lacks the ability to manage multiple CP-IWFs as required by the Paradyne DSLAM products. This enterprise mib is meant to be used in connection with RFC 2863 which defines the ifTable.
pdnCpIwfMIBCompliance	1.3.6.1.4.1.1795.2.24.2.50.1.2.1.1			The compliance statement for SNMP entities that support LES as specified in af-vmoa-0145.000 of the ATM Forum. This compliance has been deprecated and replaced by V2 below.
pdnCpIwfMIBCompliances	1.3.6.1.4.1.1795.2.24.2.50.1.2.1
pdnCpIwfMIBComplianceV2	1.3.6.1.4.1.1795.2.24.2.50.1.2.1.2			The compliance statement for SNMP entities that support LES as specified in af-vmoa-0145.000 of the ATM Forum. This compliance statement superseeds the pdnCpIwfMIBCompliance. This compliance has been deprecated and replaced by V3 below.
pdnCpIwfMIBComplianceV3	1.3.6.1.4.1.1795.2.24.2.50.1.2.1.3			The compliance statement for SNMP entities that support LES as specified in af-vmoa-0145.000 of the ATM Forum. This compliance statement superseeds the pdnCpIwfMIBComplianceV2.
pdnCpIwfMIBConformance	1.3.6.1.4.1.1795.2.24.2.50.1.2
pdnCpIwfMIBGroups	1.3.6.1.4.1.1795.2.24.2.50.1.2.2
pdnCpIwfMIBObjects	1.3.6.1.4.1.1795.2.24.2.50.1.1
pdnCpIwfNotifications	1.3.6.1.4.1.1795.2.24.2.50.1.0
I32 pdnCpIwfNumPotsAssigned	1.3.6.1.4.1.1795.2.24.2.50.1.1.1.4.1.4	Integer32	read-only	This object maintains the number of pots ports currently assigned to this CpIwf. It is not required that a new created CpIwf has Pots ports assigned to it. Moreover, the default value for this object can be implementation specific, for example: - assign all 24 POTS ports to the CpIwf port upon creation. - assign a minimum number of POTS to the CpIwf port.
pdnCpIwfPotsPortConfigGroup	1.3.6.1.4.1.1795.2.24.2.50.1.2.2.2			Configuration group for Pots ports This group is now deprecated by pdnCpIwfPotsPortConfigGroupV2.
pdnCpIwfPotsPortConfigGroupV2	1.3.6.1.4.1.1795.2.24.2.50.1.2.2.8			Configuration group for Pots ports
pdnCpIwfPotsPortPacketStatsGroup	1.3.6.1.4.1.1795.2.24.2.50.1.2.2.11			Pots Ports packet statistics group
pdnCpIwfPotsPortStatsGroup	1.3.6.1.4.1.1795.2.24.2.50.1.2.2.4			Pots Ports stats group
pdnCpIwfPotsPortStatsGroupV2	1.3.6.1.4.1.1795.2.24.2.50.1.2.2.7			Pots Ports stats group
pdnCpIwfPotsPortTestGroupV2	1.3.6.1.4.1.1795.2.24.2.50.1.2.2.9			Pots Ports test group
CPI pdnCpIwfRegion	1.3.6.1.4.1.1795.2.24.2.50.1.1.1.3	CpIwfRegion	read-write	This object permits the selection of a regional set of parameters that apply to the entire device.
ROW pdnCpIwfRowStatus	1.3.6.1.4.1.1795.2.24.2.50.1.1.1.4.1.3	RowStatus	read-create	rowStatus object that allows creation and deletion of CpIwfs.
I32 pdnCpIwfSscsPredefinedProfile	1.3.6.1.4.1.1795.2.24.2.50.1.1.1.4.1.7	Integer32	read-write	This object allows selection of predefined profiles for use by voice/voiceband data connections using UUI codepoints 0-15 with type 1 packets. The ATM Forum predefined profiles are specified in Annex A: ATM Forum Predefined Profiles (see reference below). Implementations are not required to support every profile. Thus, an SNMP set on this object to an unsupported profile must result in an SNMP Response with error status of badValue(3). Examples of profiles and its attributes values: > (PCM-64, 44 Octet packets, without silence): ------------------------------------------------------------------------------- UUI \| Packet \| Encoding \| Description \| \| Packet \| Seq.No Codepoint \| Length \| Format \| of \| M \| Time \| Interval Range \| (octets) \| Reference \| Algorithm \| \| (ms) \| (ms) ------------------------------------------------------------------------------- 0-15 44 Fig B-1/I.366.2 PCM, G.711-64, 1 5.5 5.5 Generic > (PCM-64 and ADPCM-32, 44 Octet packets, without silence): ------------------------------------------------------------------------------- UUI \| Packet \| Encoding \| Description \| \| Packet \| Seq.No Codepoint \| Length \| Format \| of \| M \| Time \| Interval Range \| (octets) \| Reference \| Algorithm \| \| (ms) \| (ms) ------------------------------------------------------------------------------- 0-7 44 Fig B-1/I.366.2 PCM, G.711-64, 1 5.5 5.5 Generic 7-15 44 Fig E-2/I.366.2 ADPCM, G.726-32 1 5.5 5.5
pdnCpIwfStatsObjects	1.3.6.1.4.1.1795.2.24.2.50.1.1.3
pdnCpIwfTable	1.3.6.1.4.1.1795.2.24.2.50.1.1.1.4		not-accessible	The Cp-Iwf Configuration table.
pdnCpIwfTestObjects	1.3.6.1.4.1.1795.2.24.2.50.1.1.2
I32 pdnCpIwfTotalNumber	1.3.6.1.4.1.1795.2.24.2.50.1.1.1.1	Integer32	read-only	Indicates the total number of CpIwfs correctly configured in this system.
INT pdnPotsPortActiveSoftswitch	1.3.6.1.4.1.1795.2.24.2.50.1.1.1.6.1.17	INTEGER	read-only	This object displays the active selection for the Softswitch (e.g., Call Agent, Proxy Agent, etc.) for this Pots port. The possible values for this object are: primary --> Primary Softswitch is selected secondary --> Secondary Softswitch is selected none --> no softswitch is currently selected. The configuration of the primary/secondary softswitches are found in objects outside this document (e.g., pdnCpIwfIpMgcpPriAgentName, etc...) If the SNMP agent can not determine an active softswitch for this Pots port (e.g, lost communication with the Call Agent), the value of this object will be set to 'none (3)'.
VOI pdnPotsPortActualVoiceCodec	1.3.6.1.4.1.1795.2.24.2.50.1.1.1.6.1.12	VoiceEncoding	read-only	This object is the actual voice encoding being used on this port as determined by the device in real-time. This object may differ from the configurable 'pdnPotsPortPreferedVoiceCodec' object.
C32 pdnPotsPortBytesReceived	1.3.6.1.4.1.1795.2.24.2.50.1.1.3.2.1.16	Counter32	read-only	Total number of bytes received by this POTS port.
C32 pdnPotsPortBytesSent	1.3.6.1.4.1.1795.2.24.2.50.1.1.3.2.1.15	Counter32	read-only	Total number of bytes transmitted by this POTS port.
I32 pdnPotsPortCallElapsedTime	1.3.6.1.4.1.1795.2.24.2.50.1.1.1.6.1.13	Integer32	read-only	This value is the number of seconds that have elapsed since the start of the current call. If no active call is in progress on this port, this object should be zero.
I32 pdnPotsPortCpIwfIndex	1.3.6.1.4.1.1795.2.24.2.50.1.1.1.6.1.2	Integer32	read-write	The value of this object corresponds to a valid pdnCpIwfIndex in the pdnCpIwfTable or '0' which has the meaning of 'not-assigned'. The value 0 is expected to be used during changes on the assignment of Pots ports, that is, a Pots port initially assigned to a CpIwf port needs to be un-assigned first and then assigned to the new CpIwf Port.
STR pdnPotsPortCustInfo	1.3.6.1.4.1.1795.2.24.2.50.1.1.1.6.1.7	DisplayString	read-write	This object represents textual information about an user, typically user name and directory number.
INT pdnPotsPortEchoCanceller	1.3.6.1.4.1.1795.2.24.2.50.1.1.1.6.1.15	INTEGER	read-only	This object displays the current status of the echo canceller.
pdnPotsPortEntry	1.3.6.1.4.1.1795.2.24.2.50.1.1.1.6.1		not-accessible	An entry in the Pots Port configuration table.
SWI pdnPotsPortG729VoiceCodec	1.3.6.1.4.1.1795.2.24.2.50.1.1.1.6.1.8	SwitchState	read-write	This object is used to enable or disable G.729 codec on this POTS port.
HOO pdnPotsPortHookStatus	1.3.6.1.4.1.1795.2.24.2.50.1.1.1.6.1.3	HookState	read-only	Current hook status of this POTS port.
NUM pdnPotsPortIfIndex	1.3.6.1.4.1.1795.2.24.2.50.1.1.1.6.1.1	InterfaceIndex	not-accessible	ifIndex value from ifTable for this POTS port.
C32 pdnPotsPortInCallsAnswered	1.3.6.1.4.1.1795.2.24.2.50.1.1.3.2.1.5	Counter32	read-only	Total number of incoming calls answered on this POTS port.
C32 pdnPotsPortInCallsConnected	1.3.6.1.4.1.1795.2.24.2.50.1.1.3.2.1.6	Counter32	read-only	Total number of incoming calls connected on this POTS port.
C32 pdnPotsPortInCallsFailure	1.3.6.1.4.1.1795.2.24.2.50.1.1.3.2.1.7	Counter32	read-only	Total number of incoming calls that failed on this POTS port.
C32 pdnPotsPortInCallsReceived	1.3.6.1.4.1.1795.2.24.2.50.1.1.3.2.1.4	Counter32	read-only	Total number of incoming calls received on this POTS port.
STR pdnPotsPortLocalEndName	1.3.6.1.4.1.1795.2.24.2.50.1.1.1.6.1.16	DisplayString	read-write	This object contains a descriptive text identifying the local endpoint's name.
T/F pdnPotsPortModemDetected	1.3.6.1.4.1.1795.2.24.2.50.1.1.1.6.1.14	TruthValue	read-only	This object displays the status of the modem/fax connected on this port. If the value of this object is 'enabled (1)' the modem or fax answer tone has been detected. Otherwise this object will return 'disabled (2)'.
C32 pdnPotsPortOutCallsAnswered	1.3.6.1.4.1.1795.2.24.2.50.1.1.3.2.1.9	Counter32	read-only	Total number of outgoing calls that were answered on this POTS port.
C32 pdnPotsPortOutCallsAttempted	1.3.6.1.4.1.1795.2.24.2.50.1.1.3.2.1.8	Counter32	read-only	Total number of outgoing calls that were attempted on this POTS port.
C32 pdnPotsPortOutCallsConnected	1.3.6.1.4.1.1795.2.24.2.50.1.1.3.2.1.10	Counter32	read-only	Total number of outgoing calls that were connected on this POTS port.
C32 pdnPotsPortOutCallsFailure	1.3.6.1.4.1.1795.2.24.2.50.1.1.3.2.1.11	Counter32	read-only	Total number of outgoing calls that failed on this POTS port.
C32 pdnPotsPortPacketsLost	1.3.6.1.4.1.1795.2.24.2.50.1.1.3.2.1.14	Counter32	read-only	Total number of packets lost by this POTS port.
C32 pdnPotsPortPacketsReceived	1.3.6.1.4.1.1795.2.24.2.50.1.1.3.2.1.13	Counter32	read-only	Total number of packets received by this POTS port.
C32 pdnPotsPortPacketsSent	1.3.6.1.4.1.1795.2.24.2.50.1.1.3.2.1.12	Counter32	read-only	Total number of packets transmitted by this POTS port.
VOI pdnPotsPortPreferedVoiceCodec	1.3.6.1.4.1.1795.2.24.2.50.1.1.1.6.1.9	VoiceEncoding	read-write	This object is the preferable voice encoding configured for this port.
I32 pdnPotsPortPreferredPacketPeriod	1.3.6.1.4.1.1795.2.24.2.50.1.1.1.6.1.10	Integer32	read-write	The value of this object contains the preferred packetization period in milliseconds.
I32 pdnPotsPortRxGain	1.3.6.1.4.1.1795.2.24.2.50.1.1.1.6.1.6	Integer32	read-write	This is the gain in the digital-to-analog direction (towards the loop).
POT pdnPotsPortSignalingMethod	1.3.6.1.4.1.1795.2.24.2.50.1.1.1.6.1.4	PotsSignaling	read-write	Signaling method selected for this POTS port.
SWI pdnPotsPortSilenceSuppression	1.3.6.1.4.1.1795.2.24.2.50.1.1.1.6.1.11	SwitchState	read-write	This object allows users to enable or disable silence suppression. If the value of the object is 'enabled (1)' silence suppression will be performed for a call placed on this port if agreed via negotiation with the far end.
pdnPotsPortStatsEntry	1.3.6.1.4.1.1795.2.24.2.50.1.1.3.2.1		not-accessible	Contained statistics per Pots Port.
pdnPotsPortStatsTable	1.3.6.1.4.1.1795.2.24.2.50.1.1.3.2		not-accessible	This table is used to maintain statistics per Pots port.
pdnPotsPortTable	1.3.6.1.4.1.1795.2.24.2.50.1.1.1.6		not-accessible	The Pots port Configuration table.
C32 pdnPotsPortTotalCalls	1.3.6.1.4.1.1795.2.24.2.50.1.1.3.2.1.1	Counter32	read-only	Total Number of successfull calls performed on this POTS port.
C32 pdnPotsPortTotalCallsDropped	1.3.6.1.4.1.1795.2.24.2.50.1.1.3.2.1.3	Counter32	read-only	Total number of calls (in/out) that were dropped on this POTS port.
C32 pdnPotsPortTotalCallsFailure	1.3.6.1.4.1.1795.2.24.2.50.1.1.3.2.1.2	Counter32	read-only	Total number of calls that failed on this POTS port.
I32 pdnPotsPortTxGain	1.3.6.1.4.1.1795.2.24.2.50.1.1.1.6.1.5	Integer32	read-write	This is the gain in the analog-to-digital direction (towards the uplink).
INT pdnPotsTestCmd	1.3.6.1.4.1.1795.2.24.2.50.1.1.2.1.1.2	INTEGER	read-write	This object can be set to initiate and/or terminate the test running on this interface. If no test is 'active' on this interface, the agent should return the value of 'noOp(1)'. Only if a test is 'active' on this interface, the agent should process a 'keepAlive (4)' command. Otherwise, this command should be rejected.
pdnPotsTestEntry	1.3.6.1.4.1.1795.2.24.2.50.1.1.2.1.1		not-accessible	An entry in the Paradyne POTS Interface Test Table. Only 1 test can be run at a time per POTS interface index (ifIndex).
INT pdnPotsTestStatus	1.3.6.1.4.1.1795.2.24.2.50.1.1.2.1.1.3	INTEGER	read-only	This object displays the current status of this entry. If no test is running on this interface, the agent should return the value 'inactive (2)'.
pdnPotsTestTable	1.3.6.1.4.1.1795.2.24.2.50.1.1.2.1		not-accessible	The Paradyne Pots Port Interface Test Table.
PDN pdnPotsTestType	1.3.6.1.4.1.1795.2.24.2.50.1.1.2.1.1.1	PdnPotsTestTypes	read-write	This object is used to specify the test type in this interface. If no test is active on this port, the agent should return the value of 'noTest (1)'

RFC description

Paradyne Loop Emulation Service Customer Premises Interworking Function management for DSLAM and POTS port configuration.

Start monitoring Paradyne DSLAM with Loop Emulation Service (LES) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download PDN-CP-IWF-MIB