All MIBs › HOTWIRE-MSDSL-INTERFACE-MIB › msdslFracPortTS
msdslFracPortTS
Module: HOTWIRE-MSDSL-INTERFACE-MIB
OID (symbolic): HOTWIRE-MSDSL-INTERFACE-MIB::msdslFracPortTS
OID (numeric): 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.28.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The Time Slot number associated with the interface identified by msdslFracPortIndex for this entry. If the allocation method is ds1ByPass then this object is not required since the whole port specified by msdslFracPortIndex will be assigned to the corresponding msdslFracPortIfIndex. If the allocation method is ds1CrossConn then this object is also not required since the whole port specified by msdslFracPortIndex will be assigned to the port specified by msdslFracPortIfIndex. If the allocation method is ds0CrossConn, then this object specifies the Time Slot associated with the interface identified by msdslFracPortIndex for this entry.
What is msdslFracPortTS?
The time slot number on the port identified by msdslFracPortIndex being mapped in this cross-connect entry; it's not needed when the allocation method is ds1ByPass or ds1CrossConn (which map whole ports), and only matters under ds0CrossConn where individual DS0 time slots are mapped. Use this together with msdslFracPortIfTS to wire a specific DS0 channel from one port to a channel on another.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.28.1.2 snmpwalk -v2c -c public <target> HOTWIRE-MSDSL-INTERFACE-MIB::msdslFracPortTS
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.28.1.2.1 snmpget -v2c -c public <target> HOTWIRE-MSDSL-INTERFACE-MIB::msdslFracPortTS.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.28.1.2.1 i <value>
Start monitoring Paradyne HotWire DSL access equipment (MSDSL interface) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HOTWIRE-MSDSL-INTERFACE-MIB::msdslFracPortTS OID value, configure state conditions and alerts, and monitor any Paradyne HotWire DSL access equipment (MSDSL interface) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1795 | pdyn | PDN-HEADER-MIB |
| 1.3.6.1.4.1.1795.2 | pdn_mgmt | PDN-HEADER-MIB |
| 1.3.6.1.4.1.1795.2.24 | paradyne | PDN-HEADER-MIB |
| 1.3.6.1.4.1.1795.2.24.2 | pdn_common | PDN-HEADER-MIB |
| 1.3.6.1.4.1.1795.2.24.2.6 | pdn_interfaces | PDN-HEADER-MIB |
| 1.3.6.1.4.1.1795.2.24.2.6.15 | pdnmsdsl | PDN-HEADER-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1795.2.24.2.6.15.1 | msdslDevice | HOTWIRE-MSDSL-INTERFACE-MIB |
| 1.3.6.1.4.1.1795.2.24.2.6.15.1.15 | msdslConfiguration | HOTWIRE-MSDSL-INTERFACE-MIB |
| 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.28 | msdslFracTable | HOTWIRE-MSDSL-INTERFACE-MIB |
| 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.28.1 | msdslFracEntry | HOTWIRE-MSDSL-INTERFACE-MIB |
| 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.28.1.2 | msdslFracPortTS | HOTWIRE-MSDSL-INTERFACE-MIB |