| OID symbolic | OID numeric | Type | Access | Description |
|---|
| hh3cStack | 1.3.6.1.4.1.25506.2.91 | | | This MIB is used to manage STM (Stack Topology Management)
information for IRF (Intelligent Resilient Framework) device.
This MIB is applicable to products which support IRF. Some objects in
this MIB may be used only for some specific products, so users should
refer to the related documents to acquire more detailed information. |
| hh3cStackGlobalConfig | 1.3.6.1.4.1.25506.2.91.1 | | | |
| I32 hh3cStackMaxMember | 1.3.6.1.4.1.25506.2.91.1.1 | Integer32 | read-only | The maximum number of members in a stack. |
| I32 hh3cStackMemberNum | 1.3.6.1.4.1.25506.2.91.1.2 | Integer32 | read-only | The number of members currently in a stack. |
| I32 hh3cStackMaxConfigPriority | 1.3.6.1.4.1.25506.2.91.1.3 | Integer32 | read-only | The highest priority that can be configured for a member in a stack. |
| INT hh3cStackAutoUpdate | 1.3.6.1.4.1.25506.2.91.1.4 | INTEGER | read-write | The function for automatically updating the image from master to
slave. When a new device tries to join a stack, the image version is
checked. When this function is enabled, if the image version of the
new device is different from that of the master, the image of the new
device will be updated to be consistent with that of the master.
When this function is disabled, the new device can not join the stack
if the image version of the new device is different from that of the
master.
disabled: disable auto update function
enabled: enable auto update function |
| INT hh3cStackMacPersistence | 1.3.6.1.4.1.25506.2.91.1.5 | INTEGER | read-write | The mode of bridge MAC address persistence. When a stack starts, the
bridge MAC address of master board will be used as that of the stack.
If the master board leaves the stack, the bridge MAC address of the
stack will change based on the mode of bridge MAC address persistence.
notPersist: The bridge MAC address of the new master board will be used
as that of the stack immediately.
persistForSixMin: The bridge MAC address will be reserved for six
minutes. In this period, if the master board which has left the stack
rejoins the stack, the bridge MAC address of the stack will not change.
Otherwise, the bridge MAC address of the new master board will be used
as that of the stack.
persistForever: Whether the master leaves or not, the bridge MAC address
of the stack will never change. |
| INT hh3cStackLinkDelayInterval | 1.3.6.1.4.1.25506.2.91.1.6 | INTEGER | read-write | The delay time for a device in a stack to report the change of stack
port link status.
If the delay time is configured, a device in a stack will not report
the change immediately when the stack port link status changes to down.
During the delay period, if the stack port link status is resumed, the
device will ignore the current change of the stack port link status.
If the stack port link status is not resumed after the delay time,
the device will report the change.
0 means no delay, namely, the device will report the change as soon as
the stack port link status changes to down.
0: no delay
200-2000(ms): delay time |
| INT hh3cStackTopology | 1.3.6.1.4.1.25506.2.91.1.7 | INTEGER | read-only | The topology of the stack.
chainConn: chain connection
ringConn: ring connection |
| hh3cStackDeviceConfigTable | 1.3.6.1.4.1.25506.2.91.2 | | not-accessible | This table contains objects to manage device information in a stack. |
| hh3cStackDeviceConfigEntry | 1.3.6.1.4.1.25506.2.91.2.1 | | not-accessible | This table contains objects to manage device information in a stack. |
| I32 hh3cStackMemberID | 1.3.6.1.4.1.25506.2.91.2.1.1 | Integer32 | read-only | The member ID of the device in a stack. |
| I32 hh3cStackConfigMemberID | 1.3.6.1.4.1.25506.2.91.2.1.2 | Integer32 | read-write | The configured member ID of the device. The valid value ranges from 1
to the value of hh3cStackMaxMember. After the member ID is configured
for a device, if this ID is not the same with that of another device,
the ID will be used as the member ID of the device when the device
reboots. If a same ID exists, the member ID of the device will be set
as another exclusive ID automatically. |
| I32 hh3cStackPriority | 1.3.6.1.4.1.25506.2.91.2.1.3 | Integer32 | read-write | The priority of a device in a stack. The valid value ranges from 1 to
the value of hh3cStackMaxConfigPriority. |
| I32 hh3cStackPortNum | 1.3.6.1.4.1.25506.2.91.2.1.4 | Integer32 | read-only | The number of stack ports which is enabled in a device. |
| I32 hh3cStackPortMaxNum | 1.3.6.1.4.1.25506.2.91.2.1.5 | Integer32 | read-only | The maximum number of stack ports in a device. |
| hh3cStackBoardConfigTable | 1.3.6.1.4.1.25506.2.91.3 | | not-accessible | This table contains objects to manage board information of the device
in a stack. |
| hh3cStackBoardConfigEntry | 1.3.6.1.4.1.25506.2.91.3.1 | | not-accessible | This table contains objects to manage board information of the device
in a stack. |
| INT hh3cStackBoardRole | 1.3.6.1.4.1.25506.2.91.3.1.1 | INTEGER | read-only | The role of the board in a stack.
slave: slave board
master: master board
loading: slave board whose image version is different from that of the
master board.
other: other |
| I32 hh3cStackBoardBelongtoMember | 1.3.6.1.4.1.25506.2.91.3.1.2 | Integer32 | read-only | The member ID of the device where the current board resides in a
stack. |
| hh3cStackPortInfoTable | 1.3.6.1.4.1.25506.2.91.4 | | not-accessible | This table contains objects to manage stack port information of a
device in a stack. |
| hh3cStackPortInfoEntry | 1.3.6.1.4.1.25506.2.91.4.1 | | not-accessible | This table contains objects to manage stack port information of a
device in a stack. |
| I32 hh3cStackPortIndex | 1.3.6.1.4.1.25506.2.91.4.1.1 | Integer32 | accessible-for-notify | The index of a stack port of the device in a stack. |
| INT hh3cStackPortEnable | 1.3.6.1.4.1.25506.2.91.4.1.2 | INTEGER | read-only | The status of the stack port of the device in a stack. If no physical
port is added to the stack port, its status is 'disabled'; otherwise,
its status is 'enabled'.
disabled: The stack port is disabled.
enabled: The stack port is enabled. |
| INT hh3cStackPortStatus | 1.3.6.1.4.1.25506.2.91.4.1.3 | INTEGER | read-only | The link status of the stack port of the device in a stack.
up: The link status of a stack port with reasonable physical connection
is up.
down: The link status of a stack port without physical connection is
down.
silent: The link status of a stack port which can not be used normally
is silent.
disabled: The link status of a stack port in disabled status is
disabled. |
| I32 hh3cStackNeighbor | 1.3.6.1.4.1.25506.2.91.4.1.4 | Integer32 | read-only | The member ID of the stack port's neighbor in a stack. 0 means no
neighbor exists. |
| hh3cStackPhyPortInfoTable | 1.3.6.1.4.1.25506.2.91.5 | | not-accessible | This table contains objects to manage the information for physical
ports which can be used for physical connection of stack port in a
stack. |
| hh3cStackPhyPortInfoEntry | 1.3.6.1.4.1.25506.2.91.5.1 | | not-accessible | This table contains objects to manage the information for physical
ports which can be used for physical connection of stack port in a
stack. |
| I32 hh3cStackBelongtoPort | 1.3.6.1.4.1.25506.2.91.5.1.1 | Integer32 | read-write | The index of the stack port to which the physical port is added. 0
means the physical port is not added to any stack port. The value will
be valid after the device in the stack reboots. |
| hh3cStackTrap | 1.3.6.1.4.1.25506.2.91.6 | | | |
| hh3cStackTrapOjbects | 1.3.6.1.4.1.25506.2.91.6.0 | | | |
| NTF hh3cStackPortLinkStatusChange | 1.3.6.1.4.1.25506.2.91.6.0.1 | | | The hh3cStackPortLinkStatusChange trap indicates that the link status
of the stack port has changed. |
| NTF hh3cStackTopologyChange | 1.3.6.1.4.1.25506.2.91.6.0.2 | | | The hh3cStackTopologyChange trap indicates that the topology type of
the stack has changed. |
