GUDEADS-EPC8X-MIB

All MIBs › GUDEADS-EPC8X-MIB

Organization: Gude Analog- und Digitalsysteme GmbH

Last Updated: 2007-03-05

Category: Domain: Power/UPS, Vendor: Gude

Description: Gude EPC8X MIB for managing 8-outlet IP power controller including outlet switching and energy monitoring.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is GUDEADS-EPC8X-MIB?

This is a Gude Analog- und Digitalsysteme (Gude ADS) vendor MIB for the EPC8X family of network-managed IP power distribution units (PDUs), which control and monitor up to 8 switchable power outlets. It exposes outlet-level configuration (startup mode, outlet indexing) and electrical measurement data (current draw per outlet), plus environmental sensor data such as temperature via an onboard sensor table, and trap-destination configuration for alerting. Its monitoring emphasis is squarely on hardware status, per-outlet current load to detect overload or unexpected power draw, temperature sensor readings to catch overheating in the equipment rack, and outlet power state for remote power cycling of connected devices. No strong dependency on other MIBs is apparent; it is a largely self-contained vendor MIB. It is deployed on Gude EPC8X series remote-controlled IP power controllers used in server rooms and equipment racks, where GUDEADS-EPC8X-MIB SNMP monitoring covers remote power management and environmental conditions.

IPNetwork Monitor allows you to monitor SNMP objects defined in GUDEADS-EPC8X-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Gude EPC8X IP power distribution unit (PDU)

Monitoring Examples

An administrator would poll epc8Irms per outlet to detect a connected device drawing abnormally high current, potentially signaling a failing power supply on that device. Reading epc8SensorTable/epc8TempSensor values would reveal rising rack temperature indicating cooling failure. Configuring epc8TrapIPTable/epc8TrapIPEntry ensures SNMP traps for outlet or sensor events are delivered to the correct management station, while epc8PortStartupMode determines whether an outlet powers on automatically after a power controller reboot.

What Can Be Monitored

per-outlet current draw (Irms)
outlet power/startup state
temperature sensor readings
trap destination configuration
outlet switching status

Imported Objects

From SNMPv2-CONF

NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
enterprises

How to Use in IPNetwork Monitor

Example using epc8PortSwitchCount OID:

Select a Gude IP power distribution unit as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type epc8PortSwitchCount into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The total number of switch actions ocurred on a PowerPort. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
gudeads	1.3.6.1.4.1.28507
gadsEPC8	1.3.6.1.4.1.28507.1
events	1.3.6.1.4.1.28507.1.0
NTF epcSwitchEvtPort1	1.3.6.1.4.1.28507.1.0.1			Event is triggered when a port is switched
NTF epcSwitchEvtPort2	1.3.6.1.4.1.28507.1.0.2			Event is triggered when a port is switched
NTF epcSwitchEvtPort3	1.3.6.1.4.1.28507.1.0.3			Event is triggered when a port is switched
NTF epcSwitchEvtPort4	1.3.6.1.4.1.28507.1.0.4			Event is triggered when a port is switched
NTF epcSwitchEvtPort5	1.3.6.1.4.1.28507.1.0.5			Event is triggered when a port is switched
NTF epcSwitchEvtPort6	1.3.6.1.4.1.28507.1.0.6			Event is triggered when a port is switched
NTF epcSwitchEvtPort7	1.3.6.1.4.1.28507.1.0.7			Event is triggered when a port is switched
NTF epcSwitchEvtPort8	1.3.6.1.4.1.28507.1.0.8			Event is triggered when a port is switched
NTF epc8TempEvtSen1	1.3.6.1.4.1.28507.1.0.9			temperature limits exceeded
NTF epc8TempEvtSen2	1.3.6.1.4.1.28507.1.0.10			temperature limits exceeded
NTF epc8HygroEvtSen1	1.3.6.1.4.1.28507.1.0.11			hygro limits exceeded
NTF epc8HygroEvtSen2	1.3.6.1.4.1.28507.1.0.12			hygro limits exceeded
epc8Objects	1.3.6.1.4.1.28507.1.1
epc8SNMPaccess	1.3.6.1.4.1.28507.1.1.1
I32 epc8TrapCtrl	1.3.6.1.4.1.28507.1.1.1.1	Integer32	read-write	0 = off 1 = Ver. 1 2 = Ver. 2c
epc8TrapIPTable	1.3.6.1.4.1.28507.1.1.1.2		not-accessible	list of all Trap receiver
epc8TrapIPEntry	1.3.6.1.4.1.28507.1.1.1.2.1		not-accessible	an entry containing management informations regarding the list of trap receivers
I32 epc8TrapIPIndex	1.3.6.1.4.1.28507.1.1.1.2.1.1	Integer32	not-accessible	A unique value, greater than zero, for each receiver slot.
IP epc8TrapIPAddr	1.3.6.1.4.1.28507.1.1.1.2.1.2	IpAddress	read-write	IP Address specifying one Trap receiver slot. A value of '00000000'H disables this slot.
I32 epc8TrapIPPort	1.3.6.1.4.1.28507.1.1.1.2.1.3	Integer32	read-write	IP Port specifying one Trap receiver slot. A value of 0 disables this slot.
epc8powerports	1.3.6.1.4.1.28507.1.1.2
I32 epc8portNumber	1.3.6.1.4.1.28507.1.1.2.1	Integer32	read-only	The number of PowerPorts
epc8portTable	1.3.6.1.4.1.28507.1.1.2.2		not-accessible	list of all EPC Powerports
epc8portEntry	1.3.6.1.4.1.28507.1.1.2.2.1		not-accessible	An entry containing management information applicable to a particular powerport.
I32 epc8PortIndex	1.3.6.1.4.1.28507.1.1.2.2.1.1	Integer32	not-accessible	A unique value, greater than zero, for each PowerPort.
OCT epc8PortName	1.3.6.1.4.1.28507.1.1.2.2.1.2	OCTET STRING	read-only	A textual string containing name of a PowerPort.
INT epc8PortState	1.3.6.1.4.1.28507.1.1.2.2.1.3	INTEGER	read-write	current state a PowerPort
C32 epc8PortSwitchCountEx	1.3.6.1.4.1.28507.1.1.2.2.1.4	Counter32	read-only	The total number of switch actions ocurred on a PowerPort. Does not count switch commands which will not switch the ralay state, so just real relay switches are displayed here.
INT epc8PortStartupMode	1.3.6.1.4.1.28507.1.1.2.2.1.5	INTEGER	read-write	set Mode of startup sequence (off, on , remember last state)
I32 epc8PortStartupDelay	1.3.6.1.4.1.28507.1.1.2.2.1.6	Integer32	read-write	Delay in sec for startup action
I32 epc8PortRepowerTime	1.3.6.1.4.1.28507.1.1.2.2.1.7	Integer32	read-write	Delay in sec for repower port after switching off
epc8Sensors	1.3.6.1.4.1.28507.1.1.3
I32 epc8Irms	1.3.6.1.4.1.28507.1.1.3.1	Integer32	read-only	actual rms Current, a value of -9999 indicates that data is not available
epc8SensorTable	1.3.6.1.4.1.28507.1.1.3.2		not-accessible
epc8SensorEntry	1.3.6.1.4.1.28507.1.1.3.2.1		not-accessible
I32 epc8SensorIndex	1.3.6.1.4.1.28507.1.1.3.2.1.1	Integer32	not-accessible
I32 epc8TempSensor	1.3.6.1.4.1.28507.1.1.3.2.1.2	Integer32	read-only	actual temperature, a value of -9999 indicates that data is not available
I32 epc8HygroSensor	1.3.6.1.4.1.28507.1.1.3.2.1.3	Integer32	read-only	actual humidity, a value of -9999 indicates that data is not available
epc8Conf	1.3.6.1.4.1.28507.1.3
epc8Groups	1.3.6.1.4.1.28507.1.3.1
epc8BasicGroup	1.3.6.1.4.1.28507.1.3.1.1			Basic objects.
epc8NotificationGroup	1.3.6.1.4.1.28507.1.3.1.2
epc8Compls	1.3.6.1.4.1.28507.1.3.2

RFC description

Manages trap configuration and network notifications for Gude Analog- und Digitalsysteme EPC devices.

Start monitoring Gude IP power distribution units with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download GUDEADS-EPC8X-MIB