GDCSC611-MIB

All MIBs › GDCSC611-MIB

Category: Vendor: GDC

Description: General DataComm SC611 shelf controller MIB for managing chassis backplane and card configuration.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is GDCSC611-MIB?

GDCSC611-MIB is a General DataComm vendor MIB for the SC611 shelf controller, used to manage and monitor the chassis backplane and installed cards in GDC multi-slot equipment. It exposes a bql611WhatAreYouTable identifying each installed card's base card type, option card, DTE card type, and firmware code revision, alongside a bql611ConfigTable for per-slot configuration and a bql611AlarmStatus object. This is squarely a hardware/software status MIB: it lets an operator inventory exactly which cards are installed in each shelf slot, confirm their firmware code revision, and check bql611AlarmStatus for an active chassis or card-level alarm condition, all central to diagnosing a shelf hardware fault or an unexpected card swap. As a vendor private MIB under the gdc/bql2/bql611 branches it has no declared dependency on standard IETF MIBs. It is deployed on General DataComm multiplexer/access shelves using the SC611 shelf controller card. Engineers can download the GDCSC611-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in GDCSC611-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

General DataComm SC611 shelf controller / access multiplexer shelf

Monitoring Examples

A technician would poll bql611WhatAreYouTable, indexed by bql611WhatAreYouIndex, to confirm each slot's bql611BaseCardType and bql611CodeRev match the expected inventory, and would check bql611AlarmStatus for any active fault. A code revision mismatch after a card replacement, or an active alarm status on a slot that should be healthy, would indicate a firmware inconsistency or a failing card in the shelf.

What Can Be Monitored

installed card type per slot
card firmware code revision
chassis/card alarm status
per-slot configuration

Imported Objects

From GDCMACRO-MIB

SCinstance

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

enterprises

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
gdc	1.3.6.1.4.1.498
bql2	1.3.6.1.4.1.498.12
bql611	1.3.6.1.4.1.498.12.2
STR bql611MIBVersion	1.3.6.1.4.1.498.12.2.1	DisplayString	read-only	The version number of the MIB, to allow products to know which MIB is being supported. The version number will be x.yzT where x is a major revision (1-9), y is a minor revision(0-9), z is a typo revision (0-9) and T indicates the MIB is still a test revision(A-Z). When a release is complete no T should exist.
bql611WhatAreYouTable	1.3.6.1.4.1.498.12.2.2		not-accessible	The GDC SC611 and DC621 What Are You Table.
bql611WhatAreYouEntry	1.3.6.1.4.1.498.12.2.2.1		not-accessible	An entry in the GDC SC611 What Are You table.
SCI bql611WhatAreYouIndex	1.3.6.1.4.1.498.12.2.2.1.1	SCinstance	read-only	This object is the identifier of the SC611/DC621 What Are You table.
INT bql611BaseCardType	1.3.6.1.4.1.498.12.2.2.1.2	INTEGER	read-only	This function returns the value the Base Card Type.
INT bql611OptionCard	1.3.6.1.4.1.498.12.2.2.1.3	INTEGER	read-only	This indicates whether the option card is installed or not on the DC621.
INT bql611DTECardType	1.3.6.1.4.1.498.12.2.2.1.4	INTEGER	read-only	This object is the DTE plug-in card type. This variable is used for a SC611 or DC621.
STR bql611CodeRev	1.3.6.1.4.1.498.12.2.2.1.5	DisplayString	read-only	This function returns the firmware code level. Example A- ,B-
OCT bql611AlarmStatus	1.3.6.1.4.1.498.12.2.2.1.6	OCTET STRING	read-only	The current alarms of the unit without the alarm masks.
bql611ConfigTable	1.3.6.1.4.1.498.12.2.3		not-accessible	The GDC SC611, DC621 2B1Q configuration table.
bql611ConfigEntry	1.3.6.1.4.1.498.12.2.3.1		not-accessible	A listing of GDC 2B1Q SC611/DC621 options.
SCI bql611ConfigIndex	1.3.6.1.4.1.498.12.2.3.1.1	SCinstance	read-only	A unique index for the Configuration Table.
INT bql611DteRate	1.3.6.1.4.1.498.12.2.3.1.2	INTEGER	read-write	Object to select the DTE rate for the SC611 or DC621.
INT bql611RateAdaption	1.3.6.1.4.1.498.12.2.3.1.3	INTEGER	read-write	Object to select the DTE Rate Adaption for the SC611 or DC621.
INT bql611DteOperation	1.3.6.1.4.1.498.12.2.3.1.4	INTEGER	read-write	Object to select the DTE Operation for the SC611 or DC621.
INT bql611TxClkSource	1.3.6.1.4.1.498.12.2.3.1.5	INTEGER	read-write	Object to select the Transmit Clock Source for the SC611 ONLY.
INT bql611WordLength	1.3.6.1.4.1.498.12.2.3.1.6	INTEGER	read-write	Object to select the Word Length for the SC611 or DC621 when selected for async mode.
INT bql611OverSpeed	1.3.6.1.4.1.498.12.2.3.1.7	INTEGER	read-write	Object to select the Over Speed for the SC611 or DC621.
INT bql611RTS	1.3.6.1.4.1.498.12.2.3.1.8	INTEGER	read-write	Object to select RTS for SC611 and DC621 only.
INT bql611RTSCTSDelay	1.3.6.1.4.1.498.12.2.3.1.9	INTEGER	read-write	Object to select RTS CTS Delay for SC611 and DC621.
INT bql611DCD	1.3.6.1.4.1.498.12.2.3.1.10	INTEGER	read-write	Object to select DCD for SC611 and DC621.
INT bql611RDL	1.3.6.1.4.1.498.12.2.3.1.11	INTEGER	read-write	Object to select the RDL respond for SC611 and DC621.
INT bql611RDLMethod	1.3.6.1.4.1.498.12.2.3.1.12	INTEGER	read-write	Object to select RDL Method for SC611 and DC621. SC611 Valid Choices DC621 Valid Choices =================== =================== V54 V54 EOC PN127
INT bql611RDLTimeout	1.3.6.1.4.1.498.12.2.3.1.13	INTEGER	read-write	Object to select RDL Timeout for SC611 or DC621.
INT bql611TestPattern	1.3.6.1.4.1.498.12.2.3.1.14	INTEGER	read-write	Object to Test Pattern for SC611 and DC621.
bql611DiagnosticTable	1.3.6.1.4.1.498.12.2.4		not-accessible	The GDC SC611/DC621 diagnostics table.
bql611DiagnosticEntry	1.3.6.1.4.1.498.12.2.4.1		not-accessible	A listing of GDC SC611/DC621 diagnostic tests
SCI bql611DiagnosticIndex	1.3.6.1.4.1.498.12.2.4.1.1	SCinstance	read-only	A unique index for the Diagnostic Table.
INT bql611DiagnosticTest	1.3.6.1.4.1.498.12.2.4.1.2	INTEGER	read-write	This function selects or reads the test. 0 = no test currently operating 1 = remote loopback test 2 = channel loopback test 4 = data loopback test 8 = selftest 16 = line loopback test 32 = terminate test All other values are test combinations such as 9 = selftest and remote loopback.
INT bql611DiagnosticActive	1.3.6.1.4.1.498.12.2.4.1.3	INTEGER	read-only	This function represents the test condition.
INT bql611DiagnosticResults	1.3.6.1.4.1.498.12.2.4.1.4	INTEGER	read-only	This function reads the self test results in bit errors.
INT bql611DiagnosticResetErrorCount	1.3.6.1.4.1.498.12.2.4.1.5	INTEGER	read-write	Object to reset selftest error count during diagnostic self testing for SC611 and DC621.
bql611ControlTable	1.3.6.1.4.1.498.12.2.5		not-accessible	The GDC SC611 and DC621 Control Table.
bql611ControlEntry	1.3.6.1.4.1.498.12.2.5.1		not-accessible	An entry in the GDC SC611/DC621 Control table.
SCI bql611ControlIndex	1.3.6.1.4.1.498.12.2.5.1.1	SCinstance	read-only	This object is the identifier of the SC611/DC621 Control table.
INT bql611SoftReset	1.3.6.1.4.1.498.12.2.5.1.2	INTEGER	read-write	Forces a soft reset on the network element. The reset selection is write only. The normal selection is read only.
INT bql611EraseConfig	1.3.6.1.4.1.498.12.2.5.1.3	INTEGER	read-write	Forces an erase of the stored configuration in the network element. The erase selection is write only. The normal selection is read only.
INT bql611FrontPanel	1.3.6.1.4.1.498.12.2.5.1.4	INTEGER	read-write	Object used to enable or disable the units front panel switches.
OCT bql611LEDStatus	1.3.6.1.4.1.498.12.2.5.1.5	OCTET STRING	read-only	The GDC SC611 front panel LED Status. A value of 1 means on, 0 is off. byte 1 bit 7 (1.7) - not used 1.6 - not used 1.5 - not used 1.4 - test mode 1.3 - alarm transitions 1.2 - self test 1.1 - line loopback 1.0 - remote loopback 2.7 - not used 2.6 - not used 2.5 - not used 2.4 - not used 2.3 - send data transitions 2.2 - receive data transitions 2.1 - request to send 2.0 - data carrier detect 3.7 - not used 3.6 - not used 3.5 - not used 3.4 - not used 3.3 - not used 3.2 - not used 3.1 - not used 3.0 - not used
OCT bql621LEDStatus	1.3.6.1.4.1.498.12.2.5.1.6	OCTET STRING	read-only	The GDC DC621 front panel LED Status. A value of 1 means on, 0 is off. byte 1 bit 7 (1.7) - not used 1.6 - test mode 1.5 - sync 1.4 - request to send 1.3 - clear to send 1.2 - carrier 1.1 - send data transitions 1.0 - receive data transitions 2.7 - not used 2.6 - not used 2.5 - not used 2.4 - not used 2.3 - not used 2.2 - not used 2.1 - not used 2.0 - not used 3.7 - not used 3.6 - not used 3.5 - not used 3.4 - not used 3.3 - not used 3.2 - not used 3.1 - not used 3.0 - not used
bql611CurrentTable	1.3.6.1.4.1.498.12.2.6		not-accessible	The SC611/DC621 Current table.
bql611CurrentEntry	1.3.6.1.4.1.498.12.2.6.1		not-accessible	An entry in the SC611/DC621 Current table.
SCI bql611CurrentIndex	1.3.6.1.4.1.498.12.2.6.1.1	SCinstance	read-only	The index value which uniquely identifies the SC611 interface to which this entry is applicable.
OCT bql611CurrentStats	1.3.6.1.4.1.498.12.2.6.1.2	OCTET STRING	read-only	The number of Errored Seconds, Severely Errored Seconds & Unavailable Errored Seconds encountered by an ISDN interface in the current 15 minute interval.
bql611IntervalTable	1.3.6.1.4.1.498.12.2.8		not-accessible	The SC611/DC621 Interval table.
bql611IntervalEntry	1.3.6.1.4.1.498.12.2.8.1		not-accessible	An entry in the SC611/DC621 Interval table.
SCI bql611IntervalIndex	1.3.6.1.4.1.498.12.2.8.1.1	SCinstance	read-only	The index value which uniquely identifies the ISDN interface to which this entry is applicable.
INT bql611IntervalNumber	1.3.6.1.4.1.498.12.2.8.1.2	INTEGER	read-only	A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minute inter- val (assuming that all 96 intervals are valid).
OCT bql611IntervalStats	1.3.6.1.4.1.498.12.2.8.1.3	OCTET STRING	read-only	The number of Errored Seconds, Severely Errored Seconds and Unavailable Errored Seconds encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.
bql611TotalTable	1.3.6.1.4.1.498.12.2.9		not-accessible	The SC611/DC621 Total table. 24 hour interval.
bql611TotalEntry	1.3.6.1.4.1.498.12.2.9.1		not-accessible	An entry in the SC611/DC621 Total table.
SCI bql611TotalIndex	1.3.6.1.4.1.498.12.2.9.1.1	SCinstance	read-only	The index value which uniquely identifies the ISDN interface to which this entry is applicable.
OCT bql611TotalStats	1.3.6.1.4.1.498.12.2.9.1.2	OCTET STRING	read-only	The number of Errored Seconds,Severely Errored Seconds & Unavailable Errored Seconds encountered by an ISDN interface in the previous 24 hour interval.
bql611IntervalMaintenanceTable	1.3.6.1.4.1.498.12.2.10		not-accessible	The SC611, DC621 Loop Interval Maintenance table.
bql611IntervalMaintenanceEntry	1.3.6.1.4.1.498.12.2.10.1		not-accessible	The SC611, DC621 Interval Maintenance table entry.
SCI bql611IntervalMaintenanceIndex	1.3.6.1.4.1.498.12.2.10.1.1	SCinstance	read-only	The index value which uniquely identifies the interface to which this entry is applicable. This has the form of a SCinstance which defines the slot, line, drop, and interface, which in this case is a Loop interface.
INT bql611ResetIntervals	1.3.6.1.4.1.498.12.2.10.1.2	INTEGER	read-write	This variable is used to reset Loop performance intervals. When it is set to reset, the Loop performance tables are reset to zero.
INT bql611NumberofValidIntervals	1.3.6.1.4.1.498.12.2.10.1.3	INTEGER	read-only	This variable is used to read the number of intervals collected. Each interval is an increment of 15 minutes.
INT bql611ResetMajorAlarm	1.3.6.1.4.1.498.12.2.10.1.4	INTEGER	read-write	This variable is used to reset alarm per Loop basis.
INT bql611ResetMinorAlarm	1.3.6.1.4.1.498.12.2.10.1.5	INTEGER	read-write	This variable is used to reset alarm per Loop basis.
bql621	1.3.6.1.4.1.498.12.3
bql611Alarm	1.3.6.1.4.1.498.12.9
bql611AlarmData	1.3.6.1.4.1.498.12.9.1
bql611NoResponseAlm	1.3.6.1.4.1.498.12.9.1.1
bql611DiagRxErrAlm	1.3.6.1.4.1.498.12.9.1.2
bql611PowerUpAlm	1.3.6.1.4.1.498.12.9.1.3
bql611OutofSyncAlm	1.3.6.1.4.1.498.12.9.1.4
bql611TxClkOutOfToleranceAlm	1.3.6.1.4.1.498.12.9.1.5
bql611ExtClkAbsentAlm	1.3.6.1.4.1.498.12.9.1.6
bql611SealingCurrentNoContinuityAlm	1.3.6.1.4.1.498.12.9.1.7
bql611DtrNotPresentAlm	1.3.6.1.4.1.498.12.9.1.8
bql611MajorAlarmBERAlm	1.3.6.1.4.1.498.12.9.1.9
bql611MinorAlarmBERAlm	1.3.6.1.4.1.498.12.9.1.10
bql611AlarmConfigTable	1.3.6.1.4.1.498.12.9.2		not-accessible	The bql611AlarmConfigTable contains entries that configure alarm reporting. The structure of the table is such that alarm configuration is supported on a unit and interface basis, and then on an alarm type basis within the interface. For simplicity sake alarms, be they unit or interface related, are represented in one table.
bql611AlarmConfigEntry	1.3.6.1.4.1.498.12.9.2.1		not-accessible	An entry in the bql611AlarmConfigTable table.
SCI bql611AlarmConfigIndex	1.3.6.1.4.1.498.12.9.2.1.1	SCinstance	read-only	The index value which uniquely identifies the interface to which this entry is applicable.
OID bql611AlarmConfigIdentifier	1.3.6.1.4.1.498.12.9.2.1.2	OBJECT IDENTIFIER	read-only	The unique alarm identifier assigned to this alarm type. The format of this identifier is an OBJECT IDENTIFIER that has the following format: {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) gdc(498) xxx(x) alarm(z) yyy(y) where xxx(x) is the administratively assigned family object identifier (z) is the object identifier for alarms in the family defined MIB and yyy(y) is the administratively assigned alarm type identifier for this alarm.
INT bql611AlarmThreshold	1.3.6.1.4.1.498.12.9.2.1.3	INTEGER	read-write	This function sets/reads the Major or Minor BER alarm threshold criteria for a SC611 or DC621.
bql621Alarm	1.3.6.1.4.1.498.12.11
bql621AlarmData	1.3.6.1.4.1.498.12.11.1
bql621NoResponseAlm	1.3.6.1.4.1.498.12.11.1.1
bql621DiagRxErrAlm	1.3.6.1.4.1.498.12.11.1.2
bql621PowerUpAlm	1.3.6.1.4.1.498.12.11.1.3
bql621DtrNotPresentAlm	1.3.6.1.4.1.498.12.11.1.4
bql621MajorAlarmBERAlm	1.3.6.1.4.1.498.12.11.1.5
bql621MinorAlarmBERAlm	1.3.6.1.4.1.498.12.11.1.6

RFC description

General DataComm MIB module for managing SC611 and DC621 devices, defining SNMP object definitions for remote datalink layer configuration and management of GDC network equipment.

Start monitoring General DataComm (GDC) SC611 shelf controller/access multiplexer shelf with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download GDCSC611-MIB

What Is GDCSC611-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description