GDCMP7002-MIB

All MIBs › GDCMP7002-MIB

Category: Domain: WAN/TDM, Vendor: GDC

Description: General DataComm MP7002 multiport MIB for managing enhanced multi-port WAN concentrator configuration.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is GDCMP7002-MIB?

GDCMP7002-MIB is a General DataComm (GDC) enterprise MIB for the MP7002 multiport device, an enhanced multi-port WAN concentrator supporting E1-style (mp7002E1x) circuit aggregation. It exposes card/version inventory data (firmware revision, model number), per-line maintenance configuration, and a device uptime object, closely mirroring the structure of the related MP7001 MIB. Its monitoring role is centered on software/hardware status: administrators track firmware revisions (mp7002FirmwareRev) and model numbers (mp7002ModelNumber) per installed card for version/compliance auditing, monitor device uptime (mp7002SysUpTime) to catch unexpected restarts, and can issue a remote reset (mp7002SoftReset) as a recovery action, all of which reflect the unit's operational and software health rather than environmental sensors. As a sibling module to GDCMP7001-MIB, it likely reuses the same GDC enterprise OID conventions and general table design. It is typically deployed on General DataComm MP7002 WAN concentrators managing multiple E1 circuits in legacy telecom/enterprise WAN networks. Engineers can download the GDCMP7002-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in GDCMP7002-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

General DataComm MP7002 multiport WAN concentrator

Monitoring Examples

An admin would poll mp7002VersionTable (keyed by mp7002VersionIndex) for mp7002FirmwareRev and mp7002ModelNumber across cards to identify any card running mismatched or outdated firmware. mp7002E1x settings would be checked for E1 circuit configuration, mp7002SysUpTime monitored for stability, and the mp7002MaintenanceTable (indexed by mp7002MaintenanceLineIndex) polled to check per-line maintenance state, with mp7002SoftReset available for remote recovery of a misbehaving line or unit.

What Can Be Monitored

firmware revision per card
model number inventory
E1 circuit configuration
device uptime
per-line maintenance status

Imported Objects

From GDCMACRO-MIB

SCinstance

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

enterprises

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
gdc	1.3.6.1.4.1.498
dsx1	1.3.6.1.4.1.498.6
mp7002System	1.3.6.1.4.1.498.6.6
mp7002Version	1.3.6.1.4.1.498.6.6.1
STR mp7002MIBversion	1.3.6.1.4.1.498.6.6.1.1	DisplayString	read-only	Identifies the version of the MIB. The format of the version is x.yzT, where 'x' identifies the major revision number, 'y' identifies the minor revision number, 'z' identifies the typographical revision, and T identifies the test revision. Acceptable values for the individual revision components are as follows: x: 1 - 9 y: 0 - 9 z: 0 - 9 T: A - Z Upon formal release, no designation for the test revision will be present.
mp7002VersionTable	1.3.6.1.4.1.498.6.6.1.2		not-accessible
mp7002VersionEntry	1.3.6.1.4.1.498.6.6.1.2.1		not-accessible	An entry in the GDC Mp7002System Version Table.
SCI mp7002VersionIndex	1.3.6.1.4.1.498.6.6.1.2.1.1	SCinstance	read-only	This object identifies Version parameters associated with the managed object.
STR mp7002FirmwareRev	1.3.6.1.4.1.498.6.6.1.2.1.2	DisplayString	read-only	The version number of the firmware, to allow products to know which revision is installed. The released version number is sequenced from --, A-, ... AA, ... ZZ. Test versions are numerical from 01 to 99.
STR mp7002ModelNumber	1.3.6.1.4.1.498.6.6.1.2.1.3	DisplayString	read-only	This variable is used to determine the type of card family installed ex. MP7002.
INT mp7002E1x	1.3.6.1.4.1.498.6.6.1.2.1.4	INTEGER	read-only	Indicates if the E1X Cascade Interface is installed.
mp7002Maintenance	1.3.6.1.4.1.498.6.6.2
mp7002MaintenanceTable	1.3.6.1.4.1.498.6.6.2.1		not-accessible	The table describes the maintenance objects for the unit and references the unit interface (cc = 00).
mp7002MaintenanceEntry	1.3.6.1.4.1.498.6.6.2.1.1		not-accessible	An entry in the GDC E1 Maintenance Table.
SCI mp7002MaintenanceLineIndex	1.3.6.1.4.1.498.6.6.2.1.1.1	SCinstance	read-only	This object identifies Maintenance parameters associated with the managed object.
INT mp7002SoftReset	1.3.6.1.4.1.498.6.6.2.1.1.2	INTEGER	read-write	Supports the action of soft resetting the unit. When this object is set to reset(2), then the unit performs a soft reset, whose meaning is specific to the type of unit being managed. The value of norm(1) will be returned when the reset is complete. The value of norm(1) can not be set by management.
INT mp7002SysUpTime	1.3.6.1.4.1.498.6.6.2.1.1.3	INTEGER	read-only	This variable is used to report the elapsed system tick time for conversion to real time at the controller and is not related to the sysUpTime referenced in MIB-II. Upon power-up of the unit, the elapsed time is cleared. The elapsed time counter rolls over upon reaching the maximum count.
INT mp7002DefaultInit	1.3.6.1.4.1.498.6.6.2.1.1.4	INTEGER	read-write	This is used to allow the NonVolatile Configuration to be set to a factory default state. When this value is set to factoryDefault(1) the unit will perform a reset to make the default configuration take affect. The value of normal(2) will be returned when the initialization is complete. The value of normal(2) can not be set by management.
INT mp7002ResetStats	1.3.6.1.4.1.498.6.6.2.1.1.5	INTEGER	read-write	Supports the action of soft resetting the mp7002NearEndValidIntervals object. When this object is set to reset(2), then the unit will reset the mp7002NearEndValidIntervals object to zero. The value of norm(1) can not be set by management.
OCT mp7002LedStatus	1.3.6.1.4.1.498.6.6.2.1.1.6	OCTET STRING	read-only	Returns a bitwise snapshot of the front panel LED state. Octet 1 bit 7 - not used bit 6 - ON bit 5 - INSV bit 4 - RSP bit 3 - TMG bit 2 - NIU bit 1 - D_I bit 0 - future use Octet 2 bit 7 - not used bit 6 - future use bit 5 - NTWK AIS bit 4 - NTWK LCV bit 3 - NTWK LOS bit 2 - NTWK OOF bit 1 - ALM bit 0 - TM Octet 3 bit 7 - not used bit 6 - ST- future use bit 5 - LT- future use bit 4 - RL- future use bit 3 - future use bit 2 - future use bit 1 - future use bit 0 - future use
STR mp7002E1Circuit	1.3.6.1.4.1.498.6.6.2.1.1.7	DisplayString	read-write	Circuit name E1 is connected to.
STR mp7002E1XCircuit	1.3.6.1.4.1.498.6.6.2.1.1.8	DisplayString	read-write	Circuit Name E1X is connected to
STR mp7002TSBundle1Name	1.3.6.1.4.1.498.6.6.2.1.1.9	DisplayString	read-write	Name first Time Slot Bundle is assigned to. Only used when unit is configured for drop side interface
STR mp7002TSBundle2Name	1.3.6.1.4.1.498.6.6.2.1.1.10	DisplayString	read-write	Name second Time Slot Bundle is assigned to. Only used when unit is configured for drop side interface.
INT mp7002SetRealTime	1.3.6.1.4.1.498.6.6.2.1.1.11	INTEGER	read-write	Number of seconds from midnight Dec 31, 1969.
OCT mp7002AlarmStatus	1.3.6.1.4.1.498.6.6.2.1.1.12	OCTET STRING	read-only	Returns a bit-wise Status of alarms Octet 1 bit 7 - not used bit 6 - NWTK_LOS bit 5 - NWTK_LOF bit 4 - NWTK_AIS bit 3 - NTWK_LCV bit 2 - TIMING LOSS bit 1 - NTWK_NE_ES bit 0 - NTWK_NE_BBE Octet 2 bit 7 - not used bit 6 - NTWK_NE_SES bit 5 - NTWK_NE_UAS bit 4 - NTWK_FE_ES bit 3 - NTWK_FE_BBE bit 2 - NTWK_FE_SES bit 1 - NTWK_FE_UAS bit 0 - NTWK_RAI Octet 3 bit 7 - not used bit 6 - E1X_LOS bit 5 - E1X_LOF bit 4 - E1X_AIS bit 3 - E1X_NE_ES bit 2 - E1X_NE_BBE bit 1 - E1X_NE_SES bit 0 - E1X_NE_UAS Octet 4 bit 7 - not used bit 6 - E1X_FE_ES bit 5 - E1X_FE_BBE bit 4 - E1X_FE_SES bit 3 - E1X_FE_UAS bit 2 - NVRAM corrupted bit 1 - unit failure bit 0 - Power-up Alarm
INT mp7002SystemTimingGenStatus	1.3.6.1.4.1.498.6.6.2.1.1.13	INTEGER	read-only	Indicates if the units configured for primary or secondary system clock are actually supplying clock and if it is the 8hkz, 4mhz, or both.
INT mp7002FarEndResetStats	1.3.6.1.4.1.498.6.6.2.1.1.14	INTEGER	read-write	Supports the action of soft resetting the mp7002FarEndValidIntervals object. When this object is set to reset(2), then the unit will reset the mp7002FarEndValidIntervals object to zero. The value of norm(1) can not be set by management.
INT mp7002NearEndStatLastInitialized	1.3.6.1.4.1.498.6.6.2.1.1.15	INTEGER	read-only	Number of seconds from midnight Dec 31, 1969 up until mp7002NearEndValidIntervals was last initialized to zero
INT mp7002FarEndStatLastInitialized	1.3.6.1.4.1.498.6.6.2.1.1.16	INTEGER	read-only	Number of seconds from midnight Dec 31, 1969 up until mp7002FarEndValidIntervals was last initialized to zero
mp7002Configuration	1.3.6.1.4.1.498.6.6.3
mp7002ConfigTable	1.3.6.1.4.1.498.6.6.3.1		not-accessible	The GDC E1 Configuration table.
mp7002ConfigEntry	1.3.6.1.4.1.498.6.6.3.1.1		not-accessible	The GDC E1 Configuration table entry.
SCI mp7002ConfigIndex	1.3.6.1.4.1.498.6.6.3.1.1.1	SCinstance	read-only	The index value which uniquely identifies the interface to which this entry is applicable. This has the form of a SCinstance which defines the slot, line, drop, and interface. Interface can be Network or, when supported, E1X.
INT mp7002InterfaceType	1.3.6.1.4.1.498.6.6.3.1.1.2	INTEGER	read-write	The operating mode of the interface to be either Network Side, Drop Side or not assigned.
INT mp7002RcvrRange	1.3.6.1.4.1.498.6.6.3.1.1.3	INTEGER	read-write	Sets the receiver range to short (6dB) or long (36dB)
INT mp7002TransmitClockSource	1.3.6.1.4.1.498.6.6.3.1.1.4	INTEGER	read-write	Sets the transmit clock source.
INT mp7002FallbackClockSource	1.3.6.1.4.1.498.6.6.3.1.1.5	INTEGER	read-write	Identifies the fallback transmit clock source.
INT mp7002FacilityDataLink	1.3.6.1.4.1.498.6.6.3.1.1.6	INTEGER	read-write
INT mp7002NearEndValidIntervals	1.3.6.1.4.1.498.6.6.3.1.1.7	INTEGER	read-only	The number of previous intervals for which valid data was collected. The value will be 16 unless the interface was brought on-line within the last 4 hours, in which case the value will be the number of complete 15 minute intervals the since interface has been online. This object is only valid for the E1 interface.
INT mp7002FarEndValidIntervals	1.3.6.1.4.1.498.6.6.3.1.1.8	INTEGER	read-only	The number of previous intervals for which valid data was collected. The value will be 16 unless the interface was brought on-line within the last 4 hours, in which case the value will be the number of complete 15 minute intervals the since interface has been online. This object is only valid for the E1 interface.
INT mp7002NetworkConnection	1.3.6.1.4.1.498.6.6.3.1.1.9	INTEGER	read-write	Sets whether the network interface is standby or online. This only applies to the Network Interface.
INT mp7002Framing	1.3.6.1.4.1.498.6.6.3.1.1.10	INTEGER	read-write	Set the framing for the interface. Abbreviations are as follows: CCS - common-channel signaling PCS0 - per channel signaling phase 0 PCS1 - per channel signaling phase 1
INT mp7002LineCoding	1.3.6.1.4.1.498.6.6.3.1.1.11	INTEGER	read-write	Sets the line coding for the interface.
mp7002DCCConfigurationTable	1.3.6.1.4.1.498.6.6.3.2		not-accessible	The GDC DCC Configuration table. These are Diagnostic Channel configuration options.
mp7002DCCConfigurationEntry	1.3.6.1.4.1.498.6.6.3.2.1		not-accessible	The GDC Diagnostic Configuration table entry.
SCI mp7002DCCConfigurationIndex	1.3.6.1.4.1.498.6.6.3.2.1.1	SCinstance	read-only	Index value into the DCC Configuration table.
INT mp7002TimeSlot	1.3.6.1.4.1.498.6.6.3.2.1.2	INTEGER	read-write	Time Slot DCC goes in
INT mp7002Bandwidth	1.3.6.1.4.1.498.6.6.3.2.1.3	INTEGER	read-write	Bandwidth to use: 8 kbps - bit 7 only 56 kbps - bits 0 - 6 64 kbps - all 8 bits
mp7002Diagnostics	1.3.6.1.4.1.498.6.6.4
mp7002DiagTable	1.3.6.1.4.1.498.6.6.4.1		not-accessible	The GDC E1 Diagnostics table. Information in the entries of this table support diagnostics testing via loopbacks. Diagnostics are only supported when mp7002InterfaceType is set to niu(2). This table applies to the Network Interface only.
mp7002DiagEntry	1.3.6.1.4.1.498.6.6.4.1.1		not-accessible	The GDC E1 Diagnostics table entry.
SCI mp7002DiagIndex	1.3.6.1.4.1.498.6.6.4.1.1.1	SCinstance	read-only	The index value which uniquely identifies the interface to which this entry is applicable. This has the form of a SCinstance which defines the slot, line, drop, and interface. Interface can be Network or, when supported, E1X.
INT mp7002TestPattern	1.3.6.1.4.1.498.6.6.4.1.1.2	INTEGER	read-write	Test pattern for tests that use the pattern generator. The value of this object is used when mp7002DiagConfig.unitTest(5) or mp7002DiagConfig.patGenOn(6) is selected. NOT SUPPORTED BY THE MP7002.
INT mp7002DiagConfig	1.3.6.1.4.1.498.6.6.4.1.1.3	INTEGER	read-write	Selects the test to run. noLoop(1) ends the test. Interoperates with mp7002TestPattern. When unitTest(2) or patGenOn(3) is selected, the pattern in mp7002TestPattern is used. payloadLoopback(4) and lineLoopback(5) are only valid when the unit is configured for a Network Side interface. localTest(6) is only valid when the unit is configured for a Drop Side interface.
INT mp7002TestLimit	1.3.6.1.4.1.498.6.6.4.1.1.4	INTEGER	read-write	Selects the duration to run a diagnostic test. The value(1) noLimit signifies that the test should run indefinitely until explicitly terminated. Default value: testTime10Mins(1)
INT mp7002TestExecutionStatus	1.3.6.1.4.1.498.6.6.4.1.1.5	INTEGER	read-only	This variable reports the status of a test. notInTest(1) indicates a test is not running. testInProgress(2) indicates that a test is currently running. testCompleted(4) indicates that a test has run and is completed. testCompletedNotInTest(5) indicates that a test has completed and it is no longer in test.
INT mp7002TestExceptions	1.3.6.1.4.1.498.6.6.4.1.1.6	INTEGER	read-only	Indicates exceptions that have occurred that may affect interpretation of the test results. The value of this object is a sum. This sum initially take the value zero. Then, for each exception, the value associated with the exception is added to the sum. The exception values are: value exception 1 a timed test was preempted so the result cannot be viewed in relation to the test duration 2 the results overflowed so the result cannot be viewed as an absolute value 4 the test was performed while synchronization could not be performed so the result may not be accurate.
INT mp7002TestResults	1.3.6.1.4.1.498.6.6.4.1.1.7	INTEGER	read-only	The results of the last diagnostic test. This can be the current test running or the last completed test. Note that the interpretation of these results may be affected by the value of the mp7002TestExceptions object. Not supported by MP7002 since no pattern generating tests are supported.
INT mp7002ResetTestResults	1.3.6.1.4.1.498.6.6.4.1.1.8	INTEGER	read-write	Resets the diagnostic error count. Not supported by MP7002 since no pattern generating tests are supported.
mp7002Performance	1.3.6.1.4.1.498.6.6.5
mp7002NearEndCurrent15MinTable	1.3.6.1.4.1.498.6.6.5.1		not-accessible	The mp7002 Current table.
mp7002NearEndCurrent15MinEntry	1.3.6.1.4.1.498.6.6.5.1.1		not-accessible	An entry in the mp7002 NearEnd Current table.
SCI mp7002NearEndCurrent15MinIndex	1.3.6.1.4.1.498.6.6.5.1.1.1	SCinstance	read-only	The index value which uniquely identifies the interface to which this entry is applicable. This has the form of a SCinstance which defines the slot, line, drop, and interface. Interface can be Network or, when supported, E1X.
OCT mp7002NearEndCurrent15MinStat	1.3.6.1.4.1.498.6.6.5.1.1.2	OCTET STRING	read-only	Returns a bitwise snapshot of the current 15Min statistics. 1.7 f/u 1.6 f/u 1.5 f/u 1.4 f/u 1.3 f/u 1.2 2^9 ES . 1.0 2^7 2.7 f/u 2.6 2^6 . 2.0 2^0 3.7 f/u 3.6 f/u 3.5 f/u 3.4 f/u 3.3 f/u 3.2 2^9 SES . 3.0 2^7 4.7 f/u 4.6 2^6 SES . 4.0 2^0 5.7 f/u 5.6 f/u 5.5 f/u 5.4 f/u 5.3 f/u 5.2 Counter Overflow (>65535) BBE 5.1 2^15 5.0 2^14 6.7 f/u 6.6 2^13 BBE . 6.0 2^7 7.7 f/u 7.6 2^6 BBE . 7.0 2^0 8.7 f/u 8.6 f/u 8.5 f/u 8.4 f/u 8.3 f/u 8.2 2^9 UAS . 8.0 2^7 9.7 f/u 9.6 2^6 UAS . 9.0 2^0 10.7 f/u 10.6 f/u 10.5 f/u 10.4 f/u 10.3 f/u 10.2 Counter Overflow (>65535) LCV 10.1 2^15 10.0 2^14 11.7 f/u 11.6 2^13 LCV . 11.0 2^7 12.7 f/u 12.6 2^6 LCV . 12.0 2^0
mp7002NearEndIntervalTable	1.3.6.1.4.1.498.6.6.5.2		not-accessible	The mp7002 Interval table.
mp7002NearEndIntervalEntry	1.3.6.1.4.1.498.6.6.5.2.1		not-accessible	An entry in the E1 Interval table.
SCI mp7002NearEndIntervalIndex	1.3.6.1.4.1.498.6.6.5.2.1.1	SCinstance	read-only	The index value which uniquely identifies the interface to which this entry is applicable. This has the form of a SCinstance which defines the slot, line, drop, and interface. Interface can be Network or, when supported, E1X.
INT mp7002NearEndIntervalNumber	1.3.6.1.4.1.498.6.6.5.2.1.2	INTEGER	read-only	The number of Errored Seconds encountered by an E1 interface in one of the previous 16, individual 15 minute, intervals.
OCT mp7002NearEndIntervalStat	1.3.6.1.4.1.498.6.6.5.2.1.3	OCTET STRING	read-only	Returns a bitwise map of the interface in one of the previous 16, individual 15 minute, intervals. 1.7 f/u 1.6 f/u 1.5 f/u 1.4 f/u 1.3 f/u 1.2 2^9 ES . 1.0 2^7 2.7 f/u 2.6 2^6 . 2.0 2^0 3.7 f/u 3.6 f/u 3.5 f/u 3.4 f/u 3.3 f/u 3.2 2^9 SES . 3.0 2^7 4.7 f/u 4.6 2^6 SES . 4.0 2^0 5.7 f/u 5.6 f/u 5.5 f/u 5.4 f/u 5.3 f/u 5.2 Counter Overflow (>65535) BBE 5.1 2^15 5.0 2^14 6.7 f/u 6.6 2^13 BBE . 6.0 2^7 7.7 f/u 7.6 2^6 BBE . 7.0 2^0 8.7 f/u 8.6 f/u 8.5 f/u 8.4 f/u 8.3 f/u 8.2 2^9 UAS . 8.0 2^7 9.7 f/u 9.6 2^6 UAS . 9.0 2^0 10.7 f/u 10.6 f/u 10.5 f/u 10.4 f/u 10.3 f/u 10.2 Counter Overflow (>65535) LCV 10.1 2^15 10.0 2^14 11.7 f/u 11.6 2^13 LCV . 11.0 2^7 12.7 f/u 12.6 2^6 LCV . 12.0 2^0
mp7002NearEndCurrent24HrTable	1.3.6.1.4.1.498.6.6.5.3		not-accessible	The E1 Current24Hr table. 4 hour interval.
mp7002NearEndCurrent24HrEntry	1.3.6.1.4.1.498.6.6.5.3.1		not-accessible	An entry in the E1 Total table.
SCI mp7002NearEndCurrent24HrIndex	1.3.6.1.4.1.498.6.6.5.3.1.1	SCinstance	read-only	The index value which uniquely identifies the interface to which this entry is applicable. This has the form of a SCinstance which defines the slot, line, drop, and interface. Interface can be Network or, when supported, E1X.
OCT mp7002NearEndCurrent24HrStat	1.3.6.1.4.1.498.6.6.5.3.1.2	OCTET STRING	read-only	Returns a bitwise map of the current 24 hour table 1.7 f/u 1.6 f/u 1.5 f/u 1.4 f/u 1.3 f/u 1.2 1: Counter Overflow (>65535) ES 1.1 2^15 1.0 2^14 2.7 f/u 2.6 2^13 ES . 2.0 2^7 3.7 f/u 3.6 2^6 ES . 3.0 2^0 4.7 f/u 4.6 f/u 4.5 f/u 4.4 f/u 4.3 f/u 4.2 1: Counter Overflow (>65535) SES 4.1 2^15 4.0 2^14 5.7 f/u 5.6 2^13 SES . 5.0 2^7 6.7 f/u 6.6 2^6 SES . 6.0 2^0 7.7 f/u 7.6 f/u 7.5 f/u 7.4 f/u 7.3 f/u 7.2 1: Counter Overflow (>65535) BBE 7.1 2^15 7.0 2^14 8.7 f/u 8.6 2^13 BBE . 8.0 2^7 9.7 f/u 9.6 2^6 BBE . 9.0 2^0 10.7 f/u 10.6 f/u 10.5 f/u 10.4 f/u 10.3 f/u 10.2 1: Counter Overflow (>65535) UAS 10.1 2^15 10.0 2^14 11.7 f/u 11.6 2^13 UAS . 11.0 2^7 12.7 f/u 12.6 2^6 UAS . 12.0 2^0 13.7 f/u 13.6 f/u 13.5 f/u 13.4 f/u 13.3 f/u 13.2 1: Counter Overflow (>65535) LCV 13.1 2^15 13.0 2^14 14.7 f/u 14.6 2^13 LCV . 14.0 2^7 15.7 f/u 15.6 2^6 LCV . 15.0 2^0
mp7002NearEndRecent24HrTable	1.3.6.1.4.1.498.6.6.5.4		not-accessible	The E1 Recent24Hr table. 4 hour interval.
mp7002NearEndRecent24HrEntry	1.3.6.1.4.1.498.6.6.5.4.1		not-accessible	An entry in the E1 Total table.
SCI mp7002NearEndRecent24HrIndex	1.3.6.1.4.1.498.6.6.5.4.1.1	SCinstance	read-only	The index value which uniquely identifies the interface to which this entry is applicable. This has the form of a SCinstance which defines the slot, line, drop, and interface. Interface can be Network or, when supported, E1X.
OCT mp7002NearEndRecent24HrStat	1.3.6.1.4.1.498.6.6.5.4.1.2	OCTET STRING	read-only	Returns a bitwise map of the current 24 hour table 1.7 f/u 1.6 f/u 1.5 f/u 1.4 f/u 1.3 f/u 1.2 1: Counter Overflow (>65535) ES 1.1 2^15 1.0 2^14 2.7 f/u 2.6 2^13 ES . 2.0 2^7 3.7 f/u 3.6 2^6 ES . 3.0 2^0 4.7 f/u 4.6 f/u 4.5 f/u 4.4 f/u 4.3 f/u 4.2 1: Counter Overflow (>65535) SES 4.1 2^15 4.0 2^14 5.7 f/u 5.6 2^13 SES . 5.0 2^7 6.7 f/u 6.6 2^6 SES . 6.0 2^0 7.7 f/u 7.6 f/u 7.5 f/u 7.4 f/u 7.3 f/u 7.2 1: Counter Overflow (>65535) BBE 7.1 2^15 7.0 2^14 8.7 f/u 8.6 2^13 BBE . 8.0 2^7 9.7 f/u 9.6 2^6 BBE . 9.0 2^0 10.7 f/u 10.6 f/u 10.5 f/u 10.4 f/u 10.3 f/u 10.2 1: Counter Overflow (>65535) UAS 10.1 2^15 10.0 2^14 11.7 f/u 11.6 2^13 UAS . 11.0 2^7 12.7 f/u 12.6 2^6 UAS . 12.0 2^0 13.7 f/u 13.6 f/u 13.5 f/u 13.4 f/u 13.3 f/u 13.2 1: Counter Overflow (>65535) LCV 13.1 2^15 13.0 2^14 14.7 f/u 14.6 2^13 LCV . 14.0 2^7 15.7 f/u 15.6 2^6 LCV . 15.0 2^0
mp7002FarEndCurrent15MinTable	1.3.6.1.4.1.498.6.6.5.5		not-accessible	The mp7002FarEnd Current 15 minute table.
mp7002FarEndCurrent15MinEntry	1.3.6.1.4.1.498.6.6.5.5.1		not-accessible	An entry in the mp7002FarEnd Current 15 Minute table.
SCI mp7002FarEndCurrent15MinIndex	1.3.6.1.4.1.498.6.6.5.5.1.1	SCinstance	read-only	The index value which uniquely identifies the interface to which this entry is applicable. This has the form of a SCinstance which defines the slot, line, drop, and interface. Interface can be Network or, when supported, E1X.
OCT mp7002FarEndCurrent15MinStat	1.3.6.1.4.1.498.6.6.5.5.1.2	OCTET STRING	read-only	Returns a bitwise map of the far end interface in one of the previous 16, individual 15 minute, intervals. 1.7 f/u 1.6 f/u 1.5 f/u 1.4 f/u 1.3 f/u 1.2 2^9 ES . 1.0 2^7 2.7 f/u 2.6 2^6 . 2.0 2^0 3.7 f/u 3.6 f/u 3.5 f/u 3.4 f/u 3.3 f/u 3.2 2^9 SES . 3.0 2^7 4.7 f/u 4.6 2^6 SES . 4.0 2^0 5.7 f/u 5.6 f/u 5.5 f/u 5.4 f/u 5.3 f/u 5.2 Counter Overflow (>65535) BBE 5.1 2^15 5.0 2^14 6.7 f/u 6.6 2^13 BBE . 6.0 2^7 7.7 f/u 7.6 2^6 BBE . 7.0 2^0 8.7 f/u 8.6 f/u 8.5 f/u 8.4 f/u 8.3 f/u 8.2 2^9 UAS . 8.0 2^7 9.7 f/u 9.6 2^6 UAS . 9.0 2^0
mp7002FarEndIntervalTable	1.3.6.1.4.1.498.6.6.5.6		not-accessible	The mp7002FarEnd Interval table.
mp7002FarEndIntervalEntry	1.3.6.1.4.1.498.6.6.5.6.1		not-accessible	An entry in the Interval table.
SCI mp7002FarEndIntervalIndex	1.3.6.1.4.1.498.6.6.5.6.1.1	SCinstance	read-only	The index value which uniquely identifies the interface to which this entry is applicable. This has the form of a SCinstance which defines the slot, line, drop, and interface. Interface can be Network or, when supported, E1X.
INT mp7002FarEndIntervalNumber	1.3.6.1.4.1.498.6.6.5.6.1.2	INTEGER	read-only	A number between 1 and 16, where 1 is the most recently completed 15 minute interval and 16 is the least recently completed 15 minutes interval (assuming that all 16 intervals are valid).
OCT mp7002FarEndIntervalStat	1.3.6.1.4.1.498.6.6.5.6.1.3	OCTET STRING	read-only	Returns a bitwise map of statistics for the far end interface in the current 15 minute interval. 1.7 f/u 1.6 f/u 1.5 f/u 1.4 f/u 1.3 f/u 1.2 2^9 ES . 1.0 2^7 2.7 f/u 2.6 2^6 . 2.0 2^0 3.7 f/u 3.6 f/u 3.5 f/u 3.4 f/u 3.3 f/u 3.2 2^9 SES . 3.0 2^7 4.7 f/u 4.6 2^6 SES . 4.0 2^0 5.7 f/u 5.6 f/u 5.5 f/u 5.4 f/u 5.3 f/u 5.2 Counter Overflow (>65535) BBE 5.1 2^15 5.0 2^14 6.7 f/u 6.6 2^13 BBE . 6.0 2^7 7.7 f/u 7.6 2^6 BBE . 7.0 2^0 8.7 f/u 8.6 f/u 8.5 f/u 8.4 f/u 8.3 f/u 8.2 2^9 UAS . 8.0 2^7 9.7 f/u 9.6 2^6 UAS . 9.0 2^0
mp7002CurrentFarEnd24HrTable	1.3.6.1.4.1.498.6.6.5.7		not-accessible	The Current 24 Hour table.
mp7002CurrentFarEnd24HrEntry	1.3.6.1.4.1.498.6.6.5.7.1		not-accessible	An entry in the Current 24 Hr table.
SCI mp7002CurrentFarEnd24HrIndex	1.3.6.1.4.1.498.6.6.5.7.1.1	SCinstance	read-only	The index value which uniquely identifies the interface to which this entry is applicable. This has the form of a SCinstance which defines the slot, line, drop, and interface. Interface can be Network or, when supported, E1X.
OCT mp7002CurrentFarEnd24HrStat	1.3.6.1.4.1.498.6.6.5.7.1.2	OCTET STRING	read-only	Returns a bitwise map of statistics for the interface in the current 24 hour interval. 1.7 f/u 1.6 f/u 1.5 f/u 1.4 f/u 1.3 f/u 1.2 1: Counter Overflow (>65535) ES 1.1 2^15 1.0 2^14 2.7 f/u 2.6 2^13 ES . 2.0 2^7 3.7 f/u 3.6 2^6 ES . 3.0 2^0 4.7 f/u 4.6 f/u 4.5 f/u 4.4 f/u 4.3 f/u 4.2 1: Counter Overflow (>65535) SES 4.1 2^15 4.0 2^14 5.7 f/u 5.6 2^13 SES . 5.0 2^7 6.7 f/u 6.6 2^6 SES . 6.0 2^0 7.7 f/u 7.6 f/u 7.5 f/u 7.4 f/u 7.3 f/u 7.2 1: Counter Overflow (>65535) BBE 7.1 2^15 7.0 2^14 8.7 f/u 8.6 2^13 BBE . 8.0 2^7 9.7 f/u 9.6 2^6 BBE . 9.0 2^0 10.7 f/u 10.6 f/u 10.5 f/u 10.4 f/u 10.3 f/u 10.2 1: Counter Overflow (>65535) UAS 10.1 2^15 10.0 2^14 11.7 f/u 11.6 2^13 UAS . 11.0 2^7 12.7 f/u 12.6 2^6 UAS . 12.0 2^0
mp7002RecentFarEnd24HrTable	1.3.6.1.4.1.498.6.6.5.8		not-accessible	The Recent 24 Hour table.
mp7002RecentFarEnd24HrEntry	1.3.6.1.4.1.498.6.6.5.8.1		not-accessible	An entry in the Recent 24 Hr table.
SCI mp7002RecentFarEnd24HrIndex	1.3.6.1.4.1.498.6.6.5.8.1.1	SCinstance	read-only	The index value which uniquely identifies the interface to which this entry is applicable. This has the form of a SCinstance which defines the slot, line, drop, and interface. Interface can be Network or, when supported, E1X.
OCT mp7002RecentFarEnd24HrStat	1.3.6.1.4.1.498.6.6.5.8.1.2	OCTET STRING	read-only	Returns a bitwise map of statistics for the interface in the Recent 24 hour interval. 1.7 f/u 1.6 f/u 1.5 f/u 1.4 f/u 1.3 f/u 1.2 1: Counter Overflow (>65535) ES 1.1 2^15 1.0 2^14 2.7 f/u 2.6 2^13 ES . 2.0 2^7 3.7 f/u 3.6 2^6 ES . 3.0 2^0 4.7 f/u 4.6 f/u 4.5 f/u 4.4 f/u 4.3 f/u 4.2 1: Counter Overflow (>65535) SES 4.1 2^15 4.0 2^14 5.7 f/u 5.6 2^13 SES . 5.0 2^7 6.7 f/u 6.6 2^6 SES . 6.0 2^0 7.7 f/u 7.6 f/u 7.5 f/u 7.4 f/u 7.3 f/u 7.2 1: Counter Overflow (>65535) BBE 7.1 2^15 7.0 2^14 8.7 f/u 8.6 2^13 BBE . 8.0 2^7 9.7 f/u 9.6 2^6 BBE . 9.0 2^0 10.7 f/u 10.6 f/u 10.5 f/u 10.4 f/u 10.3 f/u 10.2 1: Counter Overflow (>65535) UAS 10.1 2^15 10.0 2^14 11.7 f/u 11.6 2^13 UAS . 11.0 2^7 12.7 f/u 12.6 2^6 UAS . 12.0 2^0
mp7002UnavailableTimeRegTable	1.3.6.1.4.1.498.6.6.5.9		not-accessible	The mp7002 Near End Unavailable Time Register table.
mp7002UnavailableTimeRegEntry	1.3.6.1.4.1.498.6.6.5.9.1		not-accessible	An entry in the Unavailable Time Register table.
SCI mp7002UnavailableTimeRegIndex	1.3.6.1.4.1.498.6.6.5.9.1.1	SCinstance	read-only	The index value which uniquely identifies the interface to which this entry is applicable. This has the form of a SCinstance which defines the slot, line, drop, and interface. Interface can be Network or, when supported, E1X.
INT mp7002UnavailableTimeRegNumber	1.3.6.1.4.1.498.6.6.5.9.1.2	INTEGER	read-only	A number between 1 and 6, where the number is the number of the Unavailable Time Register.
INT mp7002UnavailableTimeRegStart	1.3.6.1.4.1.498.6.6.5.9.1.3	INTEGER	read-only	Start time of one of the Unavailable Time Registers.
INT mp7002UnavailableTimeRegStop	1.3.6.1.4.1.498.6.6.5.9.1.4	INTEGER	read-only	Stop time of one of the Unavailable Time Registers.
mp7002FarEndUnavailableTimeRegTable	1.3.6.1.4.1.498.6.6.5.10		not-accessible	The mp7002 Unavailable Time Register table.
mp7002FarEndUnavailableTimeRegEntry	1.3.6.1.4.1.498.6.6.5.10.1		not-accessible	An entry in the Unavailable Time Register table.
SCI mp7002FarEndUnavailableTimeRegIndex	1.3.6.1.4.1.498.6.6.5.10.1.1	SCinstance	read-only	The index value which uniquely identifies the interface to which this entry is applicable. This has the form of a SCinstance which defines the slot, line, drop, and interface. Interface can be Network or, when supported, E1X.
INT mp7002FarEndUnavailableTimeRegNumber	1.3.6.1.4.1.498.6.6.5.10.1.2	INTEGER	read-only	A number between 1 and 6, where the number is the number of the Unavailable Time Register.
INT mp7002FarEndUnavailableTimeRegStart	1.3.6.1.4.1.498.6.6.5.10.1.3	INTEGER	read-only	Start time of one of the Unavailable Time Registers.
INT mp7002FarEndUnavailableTimeRegStop	1.3.6.1.4.1.498.6.6.5.10.1.4	INTEGER	read-only	Stop time of one of the Unavailable Time Registers.
mp7002SysConfig	1.3.6.1.4.1.498.6.6.7
mp7002SysTimingTable	1.3.6.1.4.1.498.6.6.7.1		not-accessible	The GDC System Timing table. These are unit options at the system level.
mp7002SysTimingEntry	1.3.6.1.4.1.498.6.6.7.1.1		not-accessible	The GDC E1 Configuration table entry.
SCI mp7002SysTimingIndex	1.3.6.1.4.1.498.6.6.7.1.1.1	SCinstance	read-only	Index value into the system configuration table.
INT mp7002SysTimingGen	1.3.6.1.4.1.498.6.6.7.1.1.2	INTEGER	read-write	Selects if the unit provides system timing. none(1) - does not provide Timing Generator primary(2) - unit is primary Timing Generator for the shelf. secondary(3) - unit is secondary Timig Generator for the shelf. Only 1 unit in the shelf can the primary or secondary timing generator. All other must be none.
mp7002HighwayAssignTable	1.3.6.1.4.1.498.6.6.7.2		not-accessible	The GDC System Configuration table. These are unit options at the system level.
mp7002HighwayAssignEntry	1.3.6.1.4.1.498.6.6.7.2.1		not-accessible	The GDC E1 Highway Assign table entry.
SCI mp7002HighwayAssignIndex	1.3.6.1.4.1.498.6.6.7.2.1.1	SCinstance	read-only	Index value into the Highway Assignment table.
INT mp7002TimeSlotBundle	1.3.6.1.4.1.498.6.6.7.2.1.2	INTEGER	read-only	Index for the bundle being assigned. A time slot bundle can be assigned to 1 or 2 of the 4 backplane highways. Bundle 1 is asigned in the Aggregate starting at Time Slot 1. Bundle 2 starts at the next available Time Slot. If only one bundle is needed, it must be bundle 1. The execute object should be sent only after acknowlegement of al assignment PDUs.
INT mp7002StartTimeSlot	1.3.6.1.4.1.498.6.6.7.2.1.3	INTEGER	read-write	Starting time slot of the bundle. If only 1 bundle is being assigned, or the first of 2 is being assigned, it must start at 1. The second of 2 must start at the next available time slot after the first bundle.
INT mp7002NumberOfTimeSlots	1.3.6.1.4.1.498.6.6.7.2.1.4	INTEGER	read-write	Number of time slots assigned to the bundle.
INT mp7002BundleDestination	1.3.6.1.4.1.498.6.6.7.2.1.5	INTEGER	read-write	Defines the destination of the bundle.
INT mp7002ExecuteAssign	1.3.6.1.4.1.498.6.6.7.2.1.6	INTEGER	read-write	Causes the MP7002 to execute configuration of the assigned highway configuration. This object should be sent in a separate PDU after acknowlegement of the assign PDU(s) has been recieved.
mp7002Alarms	1.3.6.1.4.1.498.6.9
mp7002AlarmData	1.3.6.1.4.1.498.6.9.1
mp7002NoResponseAlm	1.3.6.1.4.1.498.6.9.1.1
mp7002DiagRxErrAlm	1.3.6.1.4.1.498.6.9.1.2
mp7002PowerUpAlm	1.3.6.1.4.1.498.6.9.1.3
mp7002NvRamCorrupt	1.3.6.1.4.1.498.6.9.1.4
mp7002UnitFailure	1.3.6.1.4.1.498.6.9.1.5
mp7002TimingLoss	1.3.6.1.4.1.498.6.9.1.6
mp7002LCV	1.3.6.1.4.1.498.6.9.1.7
mp7002LossOfSignal	1.3.6.1.4.1.498.6.9.1.8
mp7002LossOfFrame	1.3.6.1.4.1.498.6.9.1.9
mp7002AlarmIndSignal	1.3.6.1.4.1.498.6.9.1.10
mp7002NEES	1.3.6.1.4.1.498.6.9.1.11
mp7002NEBBE	1.3.6.1.4.1.498.6.9.1.12
mp7002NESES	1.3.6.1.4.1.498.6.9.1.13
mp7002NEUAS	1.3.6.1.4.1.498.6.9.1.14
mp7002FEES	1.3.6.1.4.1.498.6.9.1.15
mp7002FEBBE	1.3.6.1.4.1.498.6.9.1.16
mp7002FESES	1.3.6.1.4.1.498.6.9.1.17
mp7002FEUAS	1.3.6.1.4.1.498.6.9.1.18
mp7002RAI	1.3.6.1.4.1.498.6.9.1.19
mp7002NearEndAlarmConfigTable	1.3.6.1.4.1.498.6.9.2		not-accessible	The mp7002NearEndAlarmConfigTable contains entries that configure alarm reporting. The structure of the table is such that alarm configuration is supported on a unit and interface basis, and then on an alarm type basis within the interface. For simplicity sake alarms, be they unit or interface related, are represented in one table.
mp7002NearEndAlarmConfigEntry	1.3.6.1.4.1.498.6.9.2.1		not-accessible	An entry in the MP7002 Alarm Configuration table.
SCI mp7002NearEndAlarmConfigIndex	1.3.6.1.4.1.498.6.9.2.1.1	SCinstance	read-only	The index value which uniquely identifies the interface to which this entry is applicable.
OID mp7002NearEndAlarmConfigIdentifier	1.3.6.1.4.1.498.6.9.2.1.2	OBJECT IDENTIFIER	read-only	The unique alarm identifier assigned to this alarm type. The format of this identifier is an OBJECT IDENTIFIER that has the following format: {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) gdc(498) xxx(x) alarm(z) yyy(y) where xxx(x) is the administratively assigned family object identifier (z) is the object identifier for alarms in the family defined MIB and yyy(y) is the administratively assigned alarm type identifier for this alarm.
INT mp7002NearEndAlarmCountWindow	1.3.6.1.4.1.498.6.9.2.1.3	INTEGER	read-write	This variable sets/reads the alarm window. This window is used with the alarm threshold to determine how long the alarm should be active before reporting. Default: disabled(1)
INT mp7002NearEndAlarmCountThreshold	1.3.6.1.4.1.498.6.9.2.1.4	INTEGER	read-write	This function sets/reads the alarm threshold criteria. This threshold is used along with the the alarm window to determine the number of instances in a given time frame for an alarm to occur before the alarm is considered active. Default: thresGT1(1)
mp7002FarEndAlarmConfigTable	1.3.6.1.4.1.498.6.9.3		not-accessible	The mp7002FarEndAlarmConfigTable contains entries that configure alarm reporting. The structure of the table is such that alarm configuration is supported on a unit and interface basis, and then on an alarm type basis within the interface. For simplicity sake alarms, be they unit or interface related, are represented in one table.
mp7002FarEndAlarmConfigEntry	1.3.6.1.4.1.498.6.9.3.1		not-accessible	An entry in the MP7002 Alarm Configuration table.
SCI mp7002FarEndAlarmConfigIndex	1.3.6.1.4.1.498.6.9.3.1.1	SCinstance	read-only	The index value which uniquely identifies the interface to which this entry is applicable.
OID mp7002FarEndAlarmConfigIdentifier	1.3.6.1.4.1.498.6.9.3.1.2	OBJECT IDENTIFIER	read-only	The unique alarm identifier assigned to this alarm type. The format of this identifier is an OBJECT IDENTIFIER that has the following format: {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) gdc(498) xxx(x) alarm(z) yyy(y) where xxx(x) is the administratively assigned family object identifier (z) is the object identifier for alarms in the family defined MIB and yyy(y) is the administratively assigned alarm type identifier for this alarm.
INT mp7002FarEndAlarmCountWindow	1.3.6.1.4.1.498.6.9.3.1.3	INTEGER	read-write	This variable sets/reads the alarm window. This window is used with the alarm threshold to determine how long the alarm should be active before reporting. Default: disabled(1)
INT mp7002FarEndAlarmCountThreshold	1.3.6.1.4.1.498.6.9.3.1.4	INTEGER	read-write	This function sets/reads the alarm threshold criteria. This threshold is used along with the the alarm window to determine the number of instances in a given time frame for an alarm to occur before the alarm is considered active. Default: thresGT1(1)
mp7002LocalAlarmConfigTable	1.3.6.1.4.1.498.6.9.4		not-accessible	The mp7002LocalAlarmConfigTable contains entries that configure alarm reporting. The structure of the table is such that alarm configuration is supported on a unit and interface basis, and then on an alarm type basis within the interface. For simplicity sake alarms, be they unit or interface related, are represented in one table.
mp7002LocalAlarmConfigEntry	1.3.6.1.4.1.498.6.9.4.1		not-accessible	An entry in the GDC Local Alarm Configuration table.
SCI mp7002LocalAlarmConfigIndex	1.3.6.1.4.1.498.6.9.4.1.1	SCinstance	read-only	The index value which uniquely identifies the interface to which this entry is applicable.
INT mp7002UASNE	1.3.6.1.4.1.498.6.9.4.1.2	INTEGER	read-write	Disables or enables the alarm on the Major buss or Minor buss.
INT mp7002SESNE	1.3.6.1.4.1.498.6.9.4.1.3	INTEGER	read-write	Disables or enables the alarm on the Major buss or Minor buss.
INT mp7002BBENE	1.3.6.1.4.1.498.6.9.4.1.4	INTEGER	read-write	Disables or enables the alarm on the Major buss or Minor buss.
INT mp7002ESNE	1.3.6.1.4.1.498.6.9.4.1.5	INTEGER	read-write	Disables or enables the alarm on the Major buss or Minor buss.
INT mp7002UASFE	1.3.6.1.4.1.498.6.9.4.1.6	INTEGER	read-write	Disables or enables the alarm on the Major buss or Minor buss.
INT mp7002SESFE	1.3.6.1.4.1.498.6.9.4.1.7	INTEGER	read-write	Disables or enables the alarm on the Major buss or Minor buss.
INT mp7002BBEFE	1.3.6.1.4.1.498.6.9.4.1.8	INTEGER	read-write	Disables or enables the alarm on the Major buss or Minor buss.
INT mp7002ESFE	1.3.6.1.4.1.498.6.9.4.1.9	INTEGER	read-write	Disables or enables the alarm on the Major buss or Minor buss.
INT mp7002LOS	1.3.6.1.4.1.498.6.9.4.1.10	INTEGER	read-write	Disables or enables the alarm on the Major buss or Minor buss.
INT mp7002LOF	1.3.6.1.4.1.498.6.9.4.1.11	INTEGER	read-write	Disables or enables the alarm on the Major buss or Minor buss.
INT mp7002AIS	1.3.6.1.4.1.498.6.9.4.1.12	INTEGER	read-write	Disables or enables the alarm on the Major buss or Minor buss.
INT mp7002TmgLoss	1.3.6.1.4.1.498.6.9.4.1.13	INTEGER	read-write	Disables or enables the alarm on the Major buss or Minor buss.
INT mp7002LCVs	1.3.6.1.4.1.498.6.9.4.1.14	INTEGER	read-write	Disables or enables the alarm on the Major buss or Minor buss.
INT mp7002NtwkRAI	1.3.6.1.4.1.498.6.9.4.1.15	INTEGER	read-write	Disables or enables the alarm on the Major buss or Minor buss.

RFC description

General DataComm MP7002 E1 interface diagnostics and performance monitoring.

Start monitoring General DataComm (GDC) MP7002 multiport WAN concentrator (E1) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download GDCMP7002-MIB

What Is GDCMP7002-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description