IBM2212-MIB

All MIBs › IBM2212-MIB

Category: Domain: WAN, Domain: WAN/TDM, Vendor: IBM

Description: IBM MIB for the IBM 2212 Nways Access Utility providing multi-service WAN routing and access management.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is IBM2212-MIB?

IBM2212-MIB is an IBM proprietary MIB for the IBM 2212 Nways Access Utility, a multi-service WAN access router used for branch-office connectivity. It exposes an adapter table (ibm2212AdapTable) describing installed adapter slots, types, and operational status, along with a graphics/port table mapping physical ports to interface indexes. This is primarily a hardware-inventory and operational-status MIB, letting an administrator confirm which WAN/LAN adapters are installed in each slot and whether each adapter is operationally up or down, revealing hardware failures or misseated cards. It relies on IBM's private enterprise MIB tree and standard ifIndex conventions for correlating ports to the interfaces group. It is typically deployed on IBM 2212 routers at branch-office or remote-site locations providing multi-protocol WAN access. Network engineers evaluating or troubleshooting this functionality can download the IBM2212-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in IBM2212-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

IBM 2212 Nways Access Utility router

Monitoring Examples

An administrator would poll ibm2212AdapTable, keyed by ibm2212AdapSlotNum, to check ibm2212AdapType and ibm2212AdapOperStatus for each installed adapter, detecting any adapter reporting a down or failed operational status. Cross-referencing ibm2212GraphicTable's ibm2212GraphicifIndex against the standard ifTable would map a specific physical port back to its logical interface for correlating link-level statistics. An adapter showing an unexpected operational status change would point to a hardware fault or a card that needs reseating.

What Can Be Monitored

installed adapter slot/type inventory
adapter operational status
physical port to interface mapping

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

enterprises

OIDs

OID symbolic	OID numeric	Type	Access	Description
ibm	1.3.6.1.4.1.2
ibmProd	1.3.6.1.4.1.2.6
ibm2212	1.3.6.1.4.1.2.6.149
ibm2212admin	1.3.6.1.4.1.2.6.149.1
ibm2212adminproducts	1.3.6.1.4.1.2.6.149.1.1
ibm2212adminOID	1.3.6.1.4.1.2.6.149.1.2
ibm2212EnetChipSet	1.3.6.1.4.1.2.6.149.1.2.1
enetChipSetUnknown	1.3.6.1.4.1.2.6.149.1.2.1.1
enetChipSetAMD	1.3.6.1.4.1.2.6.149.1.2.1.2
ibm2212adminDebug	1.3.6.1.4.1.2.6.149.1.3
ibm2212system	1.3.6.1.4.1.2.6.149.2
ibm2212systemInfo	1.3.6.1.4.1.2.6.149.2.1
ibm2212cfgInfo	1.3.6.1.4.1.2.6.149.2.2
ibm2212hardware	1.3.6.1.4.1.2.6.149.3
ibm2212hardwareGeneral	1.3.6.1.4.1.2.6.149.3.1
ibm2212AdapTable	1.3.6.1.4.1.2.6.149.3.1.1		not-accessible	A table of information about adapters in this box.
ibm2212AdapEntry	1.3.6.1.4.1.2.6.149.3.1.1.1		not-accessible	An entry containing objects to describe the adapter in a given slot.
INT ibm2212AdapSlotNum	1.3.6.1.4.1.2.6.149.3.1.1.1.1	INTEGER	read-only	The number identifying a slot location where an adapter can be inserted. The 2212 has four fixed serial ports on the system card that are designated by slot 0.
INT ibm2212AdapType	1.3.6.1.4.1.2.6.149.3.1.1.1.2	INTEGER	read-only	The type of adapter that is inserted into this slot. Not all of the adapter types listed above are necessarily currently available and supported. The four fixed serial ports on the system card are identified by the serial-4port-shallow(7) enumeration. If no adapter is present, the variable will take the value not-present(2).
INT ibm2212AdapOperStatus	1.3.6.1.4.1.2.6.149.3.1.1.1.3	INTEGER	read-only	The operational status of this adapter. unknown (1) : If there was problem determining the operational status of the adapter. not-present (2) : If no adapter is currently inserted. enable-pending (3) : Adapter has been identified, but not yet enabled. enabled (4) : Adapter has been identified in valid slot and has been powered on and enabled. unknown-device (5) : Adapter is powered off because it is in the wrong slot or of unknown type. config-error (6) : Adapter has been identified, powered on and enabled, but failed to read its configuration data. not-powered (7) : Adapter has been identified in valid slot but is not currently powered on.
ibm2212GraphicTable	1.3.6.1.4.1.2.6.149.3.1.2		not-accessible	A table of information mapping a slot and port to an interface table ifIndex. An entry exists in this table only if the ifConnectorPresent object is true
ibm2212GraphicEntry	1.3.6.1.4.1.2.6.149.3.1.2.1		not-accessible	An entry mapping slot and port to an interface table ifIndex.
INT ibm2212GraphicSlotNum	1.3.6.1.4.1.2.6.149.3.1.2.1.1	INTEGER	read-only	The number identifying a slot location where an adapter can be inserted. The 2212 has four fixed serial ports on the system card that are designated by slot 0.
INT ibm2212GraphicPortNum	1.3.6.1.4.1.2.6.149.3.1.2.1.2	INTEGER	read-only	The number identifying a port on a given adapter. A port implies a physical connector is associated with it.
INT ibm2212GraphicifIndex	1.3.6.1.4.1.2.6.149.3.1.2.1.3	INTEGER	read-only	The ifIndex of the interface table entry associated with this port on an adapter. By definition, the ifEntry has ifConnectorPresent = true.
ibm2212routing	1.3.6.1.4.1.2.6.149.4
ibm2212switching	1.3.6.1.4.1.2.6.149.5

RFC description

Manages IBM 2212 family routers with administrative, system, hardware, routing, and switching management objects.

Start monitoring IBM routers with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download IBM2212-MIB

What Is IBM2212-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description