Fore-Framnetmod-MIB

All MIBs › Fore-Framnetmod-MIB

Organization: FORE

Last Updated: 1999-11-05

Category: ATM, Frame Relay, Vendor: Fore Systems (ATM)

Description: Fore Systems Frame Relay network module MIB providing configuration and statistics for Frame Relay interface modules in ForeRunner ATM switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is Fore-Framnetmod-MIB?

This is a Fore Systems proprietary MIB for the Frame Relay network module (FRAM netmod) used in ForeRunner ATM switches, providing configuration and statistics for Frame Relay interface modules. Its core content is the nmFramNetmodConfTable, which holds configuration information for the Frame Relay network module hardware installed in the switch. Its monitoring value is centered on the operational configuration state of the Frame Relay module itself, letting an administrator confirm the module is correctly configured, which is a prerequisite for diagnosing Frame Relay circuit or interface problems on that hardware. It is a self-contained proprietary MIB with no significant external standards dependency noted beyond general Frame Relay concepts. It is deployed on ForeRunner ATM switches equipped with Frame Relay network interface modules in carrier or enterprise ATM/Frame Relay networks. Engineers can download the Fore-Framnetmod-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in Fore-Framnetmod-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Fore Systems ForeRunner ATM switch

Monitoring Examples

An administrator would poll the nmFramNetmodConfTable to confirm the configuration parameters of an installed Frame Relay netmod card match the intended provisioning, such as verifying the module's settings after a card swap. A configuration entry with unexpected or default values would suggest the module was not properly reprovisioned after replacement. No further sample object names were provided for this module, so additional identifiers cannot be confirmed here.

What Can Be Monitored

Frame Relay network module configuration

Imported Objects

From Fore-Common-MIB

atmSwitch	OBJECT-IDENTITY
frameInternetworking	OBJECT-IDENTITY

From Fore-Funi-MIB

funiConnFuniVci	OBJECT-TYPE
funiConnFuniVpi	OBJECT-TYPE

From Fore-Ifcreate-MIB

ifConvertToIfIndexChannelId	OBJECT-TYPE
ifConvertToIfIndexPortId	OBJECT-TYPE

From FRAME-RELAY-DTE-MIB

frCircuitDlci

OBJECT-TYPE

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks

From SNMPv2-TC

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
fram	1.3.6.1.4.1.326.1.16.3			This is the FRAM netmod proprietory MIB. Currently, this mib defines one table: nmFramNetmodConfTable This table contains configuration information for FRAM netmod.
nmFramNetmodConfTable	1.3.6.1.4.1.326.1.16.3.1		not-accessible	This table has the objects for configuration of a FRAM netmod. Creation of an entry for this table is triggered by setting moduleState to inService. moduleState is one of the objects of moduleTable defined in fore-switch.mib
nmFramNetmodConfEntry	1.3.6.1.4.1.326.1.16.3.1.1		not-accessible	A table entry containing FRAM netmod specific config information
I32 nmFramBoard	1.3.6.1.4.1.326.1.16.3.1.1.1	Integer32	read-only	the index of this board within the ATM switch, equivalent to moduleBoard of moduleTable defined in fore-switch.mib
I32 nmFramModule	1.3.6.1.4.1.326.1.16.3.1.1.2	Integer32	read-only	the number of this network module within the ATM switch board, equivalent to moduleNumber of moduleTable defined in fore-switch.mib
INT nmFramEpdPpdBufferProportion	1.3.6.1.4.1.326.1.16.3.1.1.3	INTEGER	read-write	Configuration of the buffer size configuration for the high and low priority cell. The sum of high and low priority buffers capacity is fixed, i.e., highzero selection means low priority buffer size being the maximum which is 32768 cells capacity. 4 possible way of partitioning the buffer: ________________________________ \| High Priority \| Low Priority \| \|_______________________________\| \| 0 cells \| 32768 cells \| \|_______________________________\| \| 8192 cells \| 24576 cells \| \|_______________________________\| \| 16384 cells \| 16384 cells \| \|_______________________________\| \| 24576 cells \| 8192 cells \| \|_______________________________\|
INT nmFramEpdclp1HighPrio	1.3.6.1.4.1.326.1.16.3.1.1.4	INTEGER	read-write	The threshold for the high priority buffer for EPD and CLP=1 in percentage of the available size
INT nmFramEpdclp0HighPrio	1.3.6.1.4.1.326.1.16.3.1.1.5	INTEGER	read-write	The threshold for the high priority buffer for EPD and CLP=0 in percentage of the available size
INT nmFramPpdclp1HighPrio	1.3.6.1.4.1.326.1.16.3.1.1.6	INTEGER	read-write	The threshold for the high priority buffer for PPD and CLP=1, in percentage of the available size
INT nmFramEpdclp1LowPrio	1.3.6.1.4.1.326.1.16.3.1.1.7	INTEGER	read-write	The threshold for the Low priority buffer for EPD and CLP=1 in percentage of the available size
INT nmFramEpdclp0LowPrio	1.3.6.1.4.1.326.1.16.3.1.1.8	INTEGER	read-write	The threshold for the Low priority buffer for EPD and CLP=0 in percentage of the available size
INT nmFramPpdclp1LowPrio	1.3.6.1.4.1.326.1.16.3.1.1.9	INTEGER	read-write	The threshold for the Low priority buffer for ppd and CLP=1 in percentage of the available size
INT nmFramOamF5Supervision	1.3.6.1.4.1.326.1.16.3.1.1.10	INTEGER	read-write	enable/disable the FR/ATM interworking OAM F5 function on FRAM netmod
INT nmFramOamF5AISRxPeriod	1.3.6.1.4.1.326.1.16.3.1.1.11	INTEGER	read-write	Time interval at which an AIS OAM cells is to be received, value is a measurement in seconds
INT nmFramOamF5AISTxPeriod	1.3.6.1.4.1.326.1.16.3.1.1.12	INTEGER	read-write	Time interval at which an AIS OAM cells is to be transmitted, value is a measurement in seconds
INT nmFramOamF5RDIRxPeriod	1.3.6.1.4.1.326.1.16.3.1.1.13	INTEGER	read-write	Time interval at which an RDI OAM cells is to be received, value is a measurement in seconds
INT nmFramOamF5RDITxPeriod	1.3.6.1.4.1.326.1.16.3.1.1.14	INTEGER	read-write	Time interval at which an RDI OAM cells is to be transmitted, value is a measurement in seconds
INT nmFramOperState	1.3.6.1.4.1.326.1.16.3.1.1.15	INTEGER	read-only	This is the operational state corresponding to the FRAM netmod startup state machine.
STR nmFramApplSwRelease	1.3.6.1.4.1.326.1.16.3.1.1.16	DisplayString	read-only	The Embedded Software Version number running on this netmod
STR nmFramBootSwRelease	1.3.6.1.4.1.326.1.16.3.1.1.17	DisplayString	read-only	The Boot Software Version number running on this netmod
STR nmFramApplKey	1.3.6.1.4.1.326.1.16.3.1.1.18	DisplayString	read-write	This object is for the purpose of setting up the Application type for the FRAM netmod. The application key should be specified when the application type is `unconfigured' or whenever the user want to reconfigure the netmod to run a different type of application. Changing the application type will cause the netmod to be reset and old configuration lost. Note this object is write-only and reading it will result in implementation-specific results.
INT nmFramApplication	1.3.6.1.4.1.326.1.16.3.1.1.19	INTEGER	read-write	This object is for the purpose of setting up the Application type for the FRAM netmod. Changing the application type will cause the netmod to be reset and old configuration lost.
INT nmFramOosLED	1.3.6.1.4.1.326.1.16.3.1.1.20	INTEGER	read-only	Indicates the netmod service status. This LED is normally dark. When it becomes red, the netmod is Out Of Service (OOS) and can be removed. FRAM netmod can be set to OOS by user which means the netmod will stop passing data when the user set this LED to red(3). See the definition of moduleState object of moduleTable in fore-switch.mib
INT nmFramMaxSigPathsPerPort	1.3.6.1.4.1.326.1.16.3.1.1.21	INTEGER	read-write	This object specifies the max number of UNI instances per port which can be created for FUNI SVC Signaling Support. In other words, this object defines the max number of FUNI services per port which can have SVC Signaling enabled.
INT nmFramStatsMonitor	1.3.6.1.4.1.326.1.16.3.1.1.22	INTEGER	read-write	This object specifies whether statistics are to be counted by the netmod system. The object controls from an overall perspective whether netmod, service and connection level statistics are to be counted. The object state will override the service level StatsMonitor objects, such that if the nmFramStatsMonitor is disabled then no statistics will be counted irrespective of whether the service level StatsMonitor is enabled. When the state changes from enabled to disabled all the related statistics will be frozen at their current value. When the state changes from disabled to enabled then all related statistics will be reset (zeroised).
TIK nmFramStatsEnabledTimeStamp	1.3.6.1.4.1.326.1.16.3.1.1.23	TimeTicks	read-only	nmFramStatsEnabledTimeStamp reflects the time, with reference to sysUpTime, when nmFramStatsMonitor is set to enabled. This will, therefore, provide a starting timestamp for the current statistics that are being counted.
I32 nmFramMsgType	1.3.6.1.4.1.326.1.16.3.1.1.24	Integer32	read-only	This object is the identifier number of the messages that are sent from The SCP to the FRAM netmods.
I32 nmFramNakCause	1.3.6.1.4.1.326.1.16.3.1.1.25	Integer32	read-only	This object is the error code that indicates why a message sent from the SCP to the FRAM netmod did not succeed.
NTF framNakMsg	1.3.6.1.4.1.326.2.2.0.2003			This trap is sent when a message from the SCP to the FRAM netmod does not succeed.

RFC description

FRAM netmod configuration for EPD/PPD controller cell buffering and threshold management on Fore ATM switches.

Start monitoring Fore Systems (later Marconi) ForeRunner ATM switch (Frame Relay network module) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download Fore-Framnetmod-MIB

What Is Fore-Framnetmod-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description