| OID symbolic | OID numeric | Type | Access | Description |
|---|
| ibm | 1.3.6.1.4.1.2 | | | |
| ibmProd | 1.3.6.1.4.1.2.6 | | | |
| nwaysMSS | 1.3.6.1.4.1.2.6.118 | | | |
| ibmMSSClientMIB | 1.3.6.1.4.1.2.6.118.4 | | | |
| fe827xNotificationGroup | 1.3.6.1.4.1.2.6.118.4.0 | | | |
| NTF fe827xPCIAdapStatusChg | 1.3.6.1.4.1.2.6.118.4.0.1 | | | The trap announces a change in the status of the PCI adapter. It shall be sent if the value of either fe827xPCIAdapOperType, fe827xPCIAdapDiagStatus, fe827xPCIAdapNetworkStatus, or fe827xPCIAdapFaultStatus changes and fe827xNotifyStatus has a value of enabled(1). |
| fe827xMIBObjectGroup | 1.3.6.1.4.1.2.6.118.4.1 | | | |
| fe827xProdGroup | 1.3.6.1.4.1.2.6.118.4.1.1 | | | |
| INT fe827xResetFlag | 1.3.6.1.4.1.2.6.118.4.1.1.1 | INTEGER | read-write | The flag that controls the reset process in this blade.
This variable shall assume a value of noreset(1) in
the absence of a request for a reset from the management
application. This variable shall assume a value of reboot(2)
if the management application requests that this blade
execute a complete hardware reboot which reloads the code
load from storage. |
| I32 fe827xDRAMInstalled | 1.3.6.1.4.1.2.6.118.4.1.1.2 | Integer32 | read-only | The total amount of dynamic RAM installed on this
blade. The amount is in units of megabytes. |
| I32 fe827xCacheInstalled | 1.3.6.1.4.1.2.6.118.4.1.1.3 | Integer32 | read-only | The total amount of Cache memory installed on this
blade. The amount is in units of Kbytes. This value
is obtained from the card version level. Version 1
cards will have 256 Kbytes. |
| I32 fe827xFlashInstalled | 1.3.6.1.4.1.2.6.118.4.1.1.4 | Integer32 | read-only | The total amount of Flash memory installed on this blade.
The amount is in units of Mbytes. This value
is obtained from the Generic Status Register. |
| I32 fe827xSRAMInstalled | 1.3.6.1.4.1.2.6.118.4.1.1.5 | Integer32 | read-only | The total amount of SRAM installed on this blade. The
amount is in units of Mbytes. This value is obtained
indirectly by reading MIMIC adapter version in the UFIC
adapter ID register. Version 1 will have 1 Mbytes. |
| INT fe827xNotifyStatus | 1.3.6.1.4.1.2.6.118.4.1.1.6 | INTEGER | read-write | The status of the trap reporting service in this MSS Client or
MSS Domain Client variable shall assume a value of enabled(1)
if this MSS Client or MSS Domain Client is permitted to send traps.
This variable shall assume a value of disabled(2) if this
MSS Client or MSS Domain Client is prohibited from sending traps. |
| IP fe827xSwitchIPAddr | 1.3.6.1.4.1.2.6.118.4.1.1.7 | IpAddress | read-only | This is the IP address of the switch that the MSS Client or
MSS Domain Client is plugged into. |
| I32 fe827xSwitchSlotNum | 1.3.6.1.4.1.2.6.118.4.1.1.8 | Integer32 | read-only | This is the slot number of the switch that the MSS Client or
MSS Domain Client is plugged into. |
| I32 fe827xSwitchPortNum | 1.3.6.1.4.1.2.6.118.4.1.1.9 | Integer32 | read-only | This is the switch port number that the MSS Client or
MSS Domain Client is associated with. |
| fe827xPCIAdapterGroup | 1.3.6.1.4.1.2.6.118.4.1.2 | | | |
| I32 fe827xPCINumSlot | 1.3.6.1.4.1.2.6.118.4.1.2.1 | Integer32 | read-only | The number of PCI adapter slots available for this blade.
At present this would assume a value 1, since there can
be only one PCI adapter for the MSS Client. This value is zero for
the MSS Domain Client since it does not support PCI adapters. |
| fe827xPCIAdapTable | 1.3.6.1.4.1.2.6.118.4.1.2.2 | | not-accessible | A table of PCI adapters entries. The number of entries is
given by the value of fe827xPCINumSlot. At present only
one PCI adapter is supported by the MSS Client. |
| fe827xPCIAdapEntry | 1.3.6.1.4.1.2.6.118.4.1.2.2.1 | | not-accessible | A PCI adapter entry containing objects to describe the
operational aspects of the PCI adapter on this blade. |
| I32 fe827xPCIAdapSlotNum | 1.3.6.1.4.1.2.6.118.4.1.2.2.1.1 | Integer32 | not-accessible | The relative slot location at which the adapter is attached to
this blade. At present slot is numbered as 1. This variable
serves as the index for the 827xPCIAdapTable. |
| INT fe827xPCIAdapType | 1.3.6.1.4.1.2.6.118.4.1.2.2.1.2 | INTEGER | read-only | The type of PCI adapter that is inserted into this slot.
This variable shall assume a value of unknown(1) if the
fe827xPCIAdapConfigType is notConfigured(1) or if the
fe827xPCIAdapConfigType is atm(2) and the fe827xPCIAdapOperStatus
has a value of unknown(1), notConfigured(2), notPresent(3),
unavailable(4), does-not_apply(5) or missConfigured (10).
The variable shall assume a value of atm(2) if the
fe827xPCIAdapConfigType has a value of atm(2) and the
fe827xPCIAdapOperStatus has a value of enabled-pending(6),
enabled(7), disabled-pending(8) or disabled(9). |
| INT fe827xPCIAdapConfigType | 1.3.6.1.4.1.2.6.118.4.1.2.2.1.3 | INTEGER | read-only | The router configuration type for this slot. The variable
shall assume a value of notConfigured(1) if no configuration
exist for this slot. The variable shall assume a value of
atm(2) if the slot is configured for an ATM adapter. |
| INT fe827xPCIAdapATMMediaType | 1.3.6.1.4.1.2.6.118.4.1.2.2.1.4 | INTEGER | read-only | The type of fiber used by the ATM short PCI cards. The values
for the media type could be Gemini or Multi-Mode Fiber mmf(2) and
Meercat or Single Mode Fiber smf(3). |
| INT fe827xPCIAdapOperStatus | 1.3.6.1.4.1.2.6.118.4.1.2.2.1.5 | INTEGER | read-only | The operational status of this PCI adapter for the balde.
The variable shall assume a value of unknown(1)
if the adapter inserted in the slot cannot be recognized. The
variable shall assume a value of notConfigured(2) if the adapter
inserted in the slot is recognized but no router configuration
exists. The variable shall assume a value of notPresent(3) if
the adapter is not inserted in the slot but the router
configuration exists. The variable shall assume a value of
unavailable(4) if adapter inserted in the slot can not be used
nor made ready to be used; for example, a hardware error. The
variable shall assume a value of doesNotApply(5) if this adapter
does not contain an operational state. The variable shall assume
a value of enablePending(6) if commands have been issued to enable
the adapter but have not been completed. The variable shall assume
a value of enabled(7) if commands have been successfully issued
to enable the adapter. The variable shall assume a value of
disablePending(8) if commands have been issued to disable the
adapter but have not been completed. The variable shall assume
a value of disabled(9) if commands have been successfully issued
to disable the adapter. The variable shall assume a value of
missConfigured(10) if the adapter is inserted in the slot
but the router configuration is of a different type. This object
would also drive the Unit LED's. |
| INT fe827xPCIAdapDiagStatus | 1.3.6.1.4.1.2.6.118.4.1.2.2.1.6 | INTEGER | read-only | The diagnostic status of this PCI adapter for the blade.
The variable shall assume a value of auto(1) if
commands have been issued by the system to determine the status
of the adapter; for example, at initialization. The variable shall
assume a value of inactive(2) if the adapter is not currently
running any diagnostics. The variable shall assume a value
of idle(3) if the adapter is in the disabled operational state
ready to run the diagnostics. The variable shall assume a value
of active(4) if commands have been issued by the user to
run the diagnostics. |
| INT fe827xPCIAdapNetworkStatus | 1.3.6.1.4.1.2.6.118.4.1.2.2.1.7 | INTEGER | read-only | The network status of this PCI adapter in this blade
The variable shall assume a value of up(1) if the adapter
is connected to the network. The variable shall assume a value
of down(3) if the adapter can not verify a network connection.
The variable shall assume a value of testing(4) if the
adapter is running tests for the network connection. The
variable shall assume a value of unknown(1) if network status
can not be determined. The variable shall assume a value of
doesNotApply(5) if the adapter does not contain a network
state. |
| INT fe827xPCIAdapFaultStatus | 1.3.6.1.4.1.2.6.118.4.1.2.2.1.8 | INTEGER | read-only | The fault status of this PCI adapter in this blade.
The variable shall assume a value of noFault(2)
if no fault that is associated with this adapter has been
detected. The variable shall assume a value of isolated(3) if this
fault that can be isolated on the adapter itself. The variable
shall assume a value of nonIsolated(4) if the fault
can not isolated on the adapter or in the network.
The variable shall assume a value of unknown(1) if the
fault status has not been determined; for example, at
initialization. This object would drive the port LED's also.
status noFault(2) indicates LED green other values indicate
port LED yellow. |
| fe827xStatGroup | 1.3.6.1.4.1.2.6.118.4.1.3 | | | |
| fe827xStatTable | 1.3.6.1.4.1.2.6.118.4.1.3.1 | | not-accessible | A table of the statistics for each queue on the MSS Client or
MSS Domain Client. |
| fe827xStatEntry | 1.3.6.1.4.1.2.6.118.4.1.3.1.1 | | not-accessible | A statistic entry containing objects to describe the
aspects of the queue's on the MSS Client or MSS Domain Client. |
| I32 fe827xStatQueueNum | 1.3.6.1.4.1.2.6.118.4.1.3.1.1.1 | Integer32 | not-accessible | The queue number on the Forwarding Engine. This variable
serves as the index for the fe827xStatTable. |
| C32 fe827xStatFramesSent | 1.3.6.1.4.1.2.6.118.4.1.3.1.1.2 | Counter32 | read-only | A count of frames sent on the queue. |
| C32 fe827xStatFramesReceived | 1.3.6.1.4.1.2.6.118.4.1.3.1.1.3 | Counter32 | read-only | A count of frames received on the queue. |
| fe827xSwitchGroup | 1.3.6.1.4.1.2.6.118.4.1.4 | | | |
| fe827xDomainIfTable | 1.3.6.1.4.1.2.6.118.4.1.4.1 | | not-accessible | A table for mapping MSS Client or MSS Domain Client interface numbers
to Switch Domain numbers. |
| fe827xDomainIfEntry | 1.3.6.1.4.1.2.6.118.4.1.4.1.1 | | not-accessible | Each entry maps a single MSS Client or MSS Domain Client
interface number to a single Switch
Domain numbers. |
| I32 fe827xSwitchDomainNum | 1.3.6.1.4.1.2.6.118.4.1.4.1.1.1 | Integer32 | read-only | Switches Domain Number associated with this MSS Client or
MSS Domain Client Interface Number. |
| fe827xMIBConformanceGroup | 1.3.6.1.4.1.2.6.118.4.2 | | | |
| feMIBGroups | 1.3.6.1.4.1.2.6.118.4.2.1 | | | |
| feGroup | 1.3.6.1.4.1.2.6.118.4.2.1.1 | | | |
| feMIBCompliances | 1.3.6.1.4.1.2.6.118.4.2.2 | | | |
| feMIBCompliance | 1.3.6.1.4.1.2.6.118.4.2.2.1 | | | |
