All MIBs › FECLIENT827x-MIB › fe827xPCIAdapFaultStatus
fe827xPCIAdapFaultStatus
Module: FECLIENT827x-MIB
OID (symbolic): FECLIENT827x-MIB::fe827xPCIAdapFaultStatus
OID (numeric): 1.3.6.1.4.1.2.6.118.4.1.2.2.1.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The fault status of this PCI adapter in this blade. The variable shall assume a value of noFault(2) if no fault that is associated with this adapter has been detected. The variable shall assume a value of isolated(3) if this fault that can be isolated on the adapter itself. The variable shall assume a value of nonIsolated(4) if the fault can not isolated on the adapter or in the network. The variable shall assume a value of unknown(1) if the fault status has not been determined; for example, at initialization. This object would drive the port LED's also. status noFault(2) indicates LED green other values indicate port LED yellow.
What is fe827xPCIAdapFaultStatus?
This object reports whether a fault has been detected on the PCI adapter and, if so, whether it can be isolated to the adapter itself: unknown(1), noFault(2), isolated(3), or nonIsolated(4); it also drives the adapter's port LED, with noFault(2) showing green and any other value showing yellow. An admin seeing isolated(3) knows the problem is contained to the adapter card and can focus a hardware swap there rather than the network. nonIsolated(4) instead points troubleshooting toward the broader network path.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.6.118.4.1.2.2.1.8 snmpwalk -v2c -c public <target> FECLIENT827x-MIB::fe827xPCIAdapFaultStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2.6.118.4.1.2.2.1.8.1 snmpget -v2c -c public <target> FECLIENT827x-MIB::fe827xPCIAdapFaultStatus.1
Start monitoring IBM 827x-series blade (legacy, PCI adapter inventory) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the FECLIENT827x-MIB::fe827xPCIAdapFaultStatus OID value, configure state conditions and alerts, and monitor any IBM 827x-series blade (legacy, PCI adapter inventory) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2 | ibm | ATM-ADAPTER-MIB |
| 1.3.6.1.4.1.2.6 | ibmProd | ATM-ADAPTER-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2.6.118 | nwaysMSS | FECLIENT827x-MIB |
| 1.3.6.1.4.1.2.6.118.4 | ibmMSSClientMIB | FECLIENT827x-MIB |
| 1.3.6.1.4.1.2.6.118.4.1 | fe827xMIBObjectGroup | FECLIENT827x-MIB |
| 1.3.6.1.4.1.2.6.118.4.1.2 | fe827xPCIAdapterGroup | FECLIENT827x-MIB |
| 1.3.6.1.4.1.2.6.118.4.1.2.2 | fe827xPCIAdapTable | FECLIENT827x-MIB |
| 1.3.6.1.4.1.2.6.118.4.1.2.2.1 | fe827xPCIAdapEntry | FECLIENT827x-MIB |
| 1.3.6.1.4.1.2.6.118.4.1.2.2.1.8 | fe827xPCIAdapFaultStatus | FECLIENT827x-MIB |