All MIBs › FECLIENT827x-MIB › fe827xPCIAdapNetworkStatus
fe827xPCIAdapNetworkStatus
Module: FECLIENT827x-MIB
OID (symbolic): FECLIENT827x-MIB::fe827xPCIAdapNetworkStatus
OID (numeric): 1.3.6.1.4.1.2.6.118.4.1.2.2.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The network status of this PCI adapter in this blade The variable shall assume a value of up(1) if the adapter is connected to the network. The variable shall assume a value of down(3) if the adapter can not verify a network connection. The variable shall assume a value of testing(4) if the adapter is running tests for the network connection. The variable shall assume a value of unknown(1) if network status can not be determined. The variable shall assume a value of doesNotApply(5) if the adapter does not contain a network state.
What is fe827xPCIAdapNetworkStatus?
This object reports the network connectivity state of the PCI adapter: unknown(1) if it cannot be determined, up(2) if connected, down(3) if no network connection can be verified, testing(4) while running connectivity tests, or doesNotApply(5) if the adapter has no such state. An admin troubleshooting a blade with no traffic would check this first to rule out a basic Layer 1/2 connectivity failure before digging into higher-layer configuration. A persistent down(3) reading despite a plugged-in fiber suggests a bad cable or far-end mismatch.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.6.118.4.1.2.2.1.7 snmpwalk -v2c -c public <target> FECLIENT827x-MIB::fe827xPCIAdapNetworkStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2.6.118.4.1.2.2.1.7.1 snmpget -v2c -c public <target> FECLIENT827x-MIB::fe827xPCIAdapNetworkStatus.1
Start monitoring IBM 827x-series blade (legacy, PCI adapter inventory) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the FECLIENT827x-MIB::fe827xPCIAdapNetworkStatus OID value, configure state conditions and alerts, and monitor any IBM 827x-series blade (legacy, PCI adapter inventory) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2 | ibm | ATM-ADAPTER-MIB |
| 1.3.6.1.4.1.2.6 | ibmProd | ATM-ADAPTER-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2.6.118 | nwaysMSS | FECLIENT827x-MIB |
| 1.3.6.1.4.1.2.6.118.4 | ibmMSSClientMIB | FECLIENT827x-MIB |
| 1.3.6.1.4.1.2.6.118.4.1 | fe827xMIBObjectGroup | FECLIENT827x-MIB |
| 1.3.6.1.4.1.2.6.118.4.1.2 | fe827xPCIAdapterGroup | FECLIENT827x-MIB |
| 1.3.6.1.4.1.2.6.118.4.1.2.2 | fe827xPCIAdapTable | FECLIENT827x-MIB |
| 1.3.6.1.4.1.2.6.118.4.1.2.2.1 | fe827xPCIAdapEntry | FECLIENT827x-MIB |
| 1.3.6.1.4.1.2.6.118.4.1.2.2.1.7 | fe827xPCIAdapNetworkStatus | FECLIENT827x-MIB |