F3-OTN-MIB

All MIBs › F3-OTN-MIB

Organization: ADVA Optical Networking

Last Updated: 2014-07-15

Category: Domain: Optical Transport, Domain: Telco/Transport, Technology: Optical Transport, Vendor: ADVA Optical

Description: ADVA Optical Networking F3 platform MIB for Optical Transport Network (OTN/G.709) layer management and performance monitoring.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is F3-OTN-MIB?

F3-OTN-MIB is a vendor-specific MIB from ADVA Optical Networking for the F3 (FSP150CM/CC) platform, modeling Optical Transport Network (OTN/G.709) layer configuration and performance on Ethernet network ports. Its f3OtnNetPortExtTable augments the vendor's cmEthernetNetPortEntry with OTN-specific fields — f3OtnNetPortFacilityType (e.g., otu2e-eth), f3OtnNetPortFec (none, gfec, efec-1, efec-2), Trace Identifier Mismatch detection/AIS-insert settings for both OTU and ODU layers, and transmitted/received TTI SAPI/DAPI/OpSp strings — while f3OtnPerfObjects carries 64-bit performance counters such as pre-FEC bit-error rate, FEC corrected-error and uncorrectable-block counts, and OTU/ODU background block errors, in both current and historical (CmPmIntervalType) buckets. This detail is useful for monitoring the health of an OTN transport link at the framing and FEC level, well below what plain Ethernet counters would show. It depends on the vendor's CM-FACILITY-MIB, CM-COMMON-MIB, CM-PERFORMANCE-MIB, and ADVA-MIB for the parent OID and shared Ethernet port entries, and is deployed on ADVA FSP150CM/CC optical transport network elements; this F3-OTN-MIB is intended for SNMP monitoring of OTN transport links.

IPNetwork Monitor allows you to monitor SNMP objects defined in F3-OTN-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ADVA Optical Networking FSP150CM/CC (F3 platform) optical transport network elements

Monitoring Examples

An operator polls f3OtnNetPortStatsExtFecCorrErr and f3OtnNetPortStatsExtFecUncorrBlockErr on an OTU2e-eth facility to gauge optical-path signal quality; a rise in uncorrectable FEC block errors, together with a Trace Identifier Mismatch flagged via f3OtnNetPortTtiActualRxHexOtu not matching the expected SAPI/DAPI, would indicate a degrading or misconnected OTN fiber path.

What Can Be Monitored

OTN facility type and FEC configuration per port
Trace Identifier Mismatch (TIM) detection and AIS insertion
transmitted/received TTI SAPI/DAPI/OpSp strings
pre-FEC bit error rate
FEC corrected/uncorrectable block error counts
OTU/ODU background block error history

Imported Objects

From ADVA-MIB

fsp150cm

OBJECT-IDENTITY

From CM-COMMON-MIB

CmPmIntervalType
PerfCounter64

From CM-FACILITY-MIB

cmEthernetNetPortEntry

OBJECT-TYPE

From CM-PERFORMANCE-MIB

cmEthernetNetPortHistoryEntry	OBJECT-TYPE
cmEthernetNetPortStatsEntry	OBJECT-TYPE

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter64
Integer32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
TEXTUAL-CONVENTION
TruthValue
VariablePointer

How to Use in IPNetwork Monitor

Example using f3OtnNetPortStatsExtFecErrSec OID:

Select an ADVA Optical Networking FSP150CM/CC (F3 platform) carrier Ethernet device (OTN/G.709 transport) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type f3OtnNetPortStatsExtFecErrSec into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports fEC Errored Seconds. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is an Integer32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases between polls, since a rising count of errors, failures, or discards often points to a real underlying problem. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
f3OtnMIB	1.3.6.1.4.1.2544.1.12.34			This module defines the OTN MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA Optical Networking.
f3OtnConfigObjects	1.3.6.1.4.1.2544.1.12.34.1
f3OtnNetPortExtTable	1.3.6.1.4.1.2544.1.12.34.1.1		not-accessible	A list of entries corresponding to Ethernet Network Port Facilities for the OTN attributes configuration purposes.
f3OtnNetPortEntry	1.3.6.1.4.1.2544.1.12.34.1.1.1		not-accessible	A conceptual row in the f3OtnNetPortEntry.
U32 f3OtnNetPortPayloadType	1.3.6.1.4.1.2544.1.12.34.1.1.1.1	Unsigned32	read-write	Represents the value to be transmitted in the PT signal of the OPU Payload Structure Identifier (PSI) overhead. The value is also used for detection of Payload Label Mismatch of the PT signal in the received ODU PSI overhead.
OTN f3OtnNetPortFacilityType	1.3.6.1.4.1.2544.1.12.34.1.1.1.2	OtnFacilityType	read-write	Represents the OTN transport wrapper and payload.
OTN f3OtnNetPortFec	1.3.6.1.4.1.2544.1.12.34.1.1.1.3	OtnFecType	read-write	Represents the Forward Error Correction (FEC) for the OTN transport frame.
TIM f3OtnNetPortTimDetectModeOtu	1.3.6.1.4.1.2544.1.12.34.1.1.1.4	TimDetectMode	read-write	Represents the support for Trace Identifier Mismatch (TIM) detection in the OTU overhead.
T/F f3OtnNetPortTimAisInsertOtuEnabled	1.3.6.1.4.1.2544.1.12.34.1.1.1.5	TruthValue	read-write	Represents the support for downstream AIS insertion when OTU Trace Identifier Mismatch (TIM) is detected.
OCT f3OtnNetPortTtiActualRxHexOtu	1.3.6.1.4.1.2544.1.12.34.1.1.1.6	OCTET STRING	read-only	Represents the value of the Trail Trace Identifier (TTI) in the OTU overhead.
STR f3OtnNetPortTtiSapiActualRxOtu	1.3.6.1.4.1.2544.1.12.34.1.1.1.7	DisplayString	read-only	Represents the SAPI value of the Trail Trace Identifier (TTI) in the OTU overhead.
STR f3OtnNetPortTtiDapiActualRxOtu	1.3.6.1.4.1.2544.1.12.34.1.1.1.8	DisplayString	read-only	Represents the DAPI value of the Trail Trace Identifier (TTI) in the OTU overhead.
STR f3OtnNetPortTtiOpSpActualRxOtu	1.3.6.1.4.1.2544.1.12.34.1.1.1.9	DisplayString	read-only	Represents the Operator Specific (OpSp) value of the Trail Trace Identifier (TTI) in the OTU overhead.
STR f3OtnNetPortTtiSapiExpectedRxOtu	1.3.6.1.4.1.2544.1.12.34.1.1.1.10	DisplayString	read-write	Represents the expected SAPI value in the received OTU overhead.
STR f3OtnNetPortTtiSapiTxOtu	1.3.6.1.4.1.2544.1.12.34.1.1.1.11	DisplayString	read-write	Represents the SAPI value in the transmitted OTU overhead.
STR f3OtnNetPortTtiDapiTxOtu	1.3.6.1.4.1.2544.1.12.34.1.1.1.12	DisplayString	read-write	Represents the DAPI value in the transmitted OTU overhead.
STR f3OtnNetPortTtiOpSpTxOtu	1.3.6.1.4.1.2544.1.12.34.1.1.1.13	DisplayString	read-write	Represents the Operator Specific (OpSp) value in the transmitted OTU overhead.
TIM f3OtnNetPortTimDetectModeOdu	1.3.6.1.4.1.2544.1.12.34.1.1.1.14	TimDetectMode	read-write	Represents the support for Trace Identifier Mismatch (TIM) detection in the ODU overhead.
T/F f3OtnNetPortTimAisInsertOduEnabled	1.3.6.1.4.1.2544.1.12.34.1.1.1.15	TruthValue	read-write	Represents the support for downstream AIS insertion when ODU Trace Identifier Mismatch (TIM) is detected.
OCT f3OtnNetPortTtiActualRxHexOdu	1.3.6.1.4.1.2544.1.12.34.1.1.1.16	OCTET STRING	read-only	Represents the value of the Trail Trace Identifier (TTI) in the ODU overhead.
STR f3OtnNetPortTtiSapiActualRxOdu	1.3.6.1.4.1.2544.1.12.34.1.1.1.17	DisplayString	read-only	Represents the SAPI value of the Trail Trace Identifier (TTI) in the ODU overhead.
STR f3OtnNetPortTtiDapiActualRxOdu	1.3.6.1.4.1.2544.1.12.34.1.1.1.18	DisplayString	read-only	Represents the DAPI value of the Trail Trace Identifier (TTI) in the ODU overhead.
STR f3OtnNetPortTtiOpSpActualRxOdu	1.3.6.1.4.1.2544.1.12.34.1.1.1.19	DisplayString	read-only	Represents the Operator Specific (OpSp) value of the Trail Trace Identifier (TTI) in the ODU overhead.
STR f3OtnNetPortTtiSapiExpectedRxOdu	1.3.6.1.4.1.2544.1.12.34.1.1.1.20	DisplayString	read-write	Represents the expected SAPI value in the received ODU overhead.
STR f3OtnNetPortTtiSapiTxOdu	1.3.6.1.4.1.2544.1.12.34.1.1.1.21	DisplayString	read-write	Represents the SAPI value in the transmitted ODU overhead.
STR f3OtnNetPortTtiDapiTxOdu	1.3.6.1.4.1.2544.1.12.34.1.1.1.22	DisplayString	read-write	Represents the DAPI value in the transmitted ODU overhead.
STR f3OtnNetPortTtiOpSpTxOdu	1.3.6.1.4.1.2544.1.12.34.1.1.1.23	DisplayString	read-write	Represents the Operator Specific (OpSp) value in the transmitted ODU overhead.
f3OtnPerfObjects	1.3.6.1.4.1.2544.1.12.34.2
f3OtnNetPortStatsExtTable	1.3.6.1.4.1.2544.1.12.34.2.1		not-accessible	A collection of Ethernet Network Port OTN attributes related statistics. These reflect the current data.
f3OtnNetPortStatsExtEntry	1.3.6.1.4.1.2544.1.12.34.2.1.1		not-accessible	A conceptual row in the f3OtnNetPortStatsExtEntry.
NUM f3OtnNetPortStatsExtBerBeforeCorr	1.3.6.1.4.1.2544.1.12.34.2.1.1.1	PerfCounter64	read-only	Ber Before Correction. Lower 32 bits represent the value in a Decimal32 interchange format. For details on encoding please refer to Decimal32's description, defined in fsp150cm-common.mib.
I32 f3OtnNetPortStatsExtFecErrSecEx	1.3.6.1.4.1.2544.1.12.34.2.1.1.2	Integer32	read-only	FEC Errored Seconds.
I32 f3OtnNetPortStatsExtFecSES	1.3.6.1.4.1.2544.1.12.34.2.1.1.3	Integer32	read-only	FEC SES.
NUM f3OtnNetPortStatsExtFecCorrErr	1.3.6.1.4.1.2544.1.12.34.2.1.1.4	PerfCounter64	read-only	FEC Corrected Seconds.
NUM f3OtnNetPortStatsExtFecUncorrBlockErr	1.3.6.1.4.1.2544.1.12.34.2.1.1.5	PerfCounter64	read-only	FEC Uncorrected Block Errors.
I32 f3OtnNetPortStatsExtOtuErrSec	1.3.6.1.4.1.2544.1.12.34.2.1.1.6	Integer32	read-only	OTU Errored Seconds.
I32 f3OtnNetPortStatsExtOtuSES	1.3.6.1.4.1.2544.1.12.34.2.1.1.7	Integer32	read-only	OTU SES.
NUM f3OtnNetPortStatsExtOtuBBE	1.3.6.1.4.1.2544.1.12.34.2.1.1.8	PerfCounter64	read-only	OTU BBE.
I32 f3OtnNetPortStatsExtOtuUAS	1.3.6.1.4.1.2544.1.12.34.2.1.1.9	Integer32	read-only	OTU UAS.
I32 f3OtnNetPortStatsExtOduErrSec	1.3.6.1.4.1.2544.1.12.34.2.1.1.10	Integer32	read-only	ODU Errored Seconds.
I32 f3OtnNetPortStatsExtOduSES	1.3.6.1.4.1.2544.1.12.34.2.1.1.11	Integer32	read-only	ODU SES.
NUM f3OtnNetPortStatsExtOduBBE	1.3.6.1.4.1.2544.1.12.34.2.1.1.12	PerfCounter64	read-only	ODU BBE.
I32 f3OtnNetPortStatsExtOduUAS	1.3.6.1.4.1.2544.1.12.34.2.1.1.13	Integer32	read-only	ODU UAS.
f3OtnNetPortHistoryExtTable	1.3.6.1.4.1.2544.1.12.34.2.2		not-accessible	A collection of Ethernet Network Port OTN attributes related statistics. These reflect the history data.
f3OtnNetPortHistoryExtEntry	1.3.6.1.4.1.2544.1.12.34.2.2.1		not-accessible	A conceptual row in the f3OtnNetPortHistoryExtEntry.
NUM f3OtnNetPortHistoryExtBerBeforeCorr	1.3.6.1.4.1.2544.1.12.34.2.2.1.1	PerfCounter64	read-only	Ber Before Correction.
I32 f3OtnNetPortHistoryExtFecErrSec	1.3.6.1.4.1.2544.1.12.34.2.2.1.2	Integer32	read-only	FEC Errored Seconds.
I32 f3OtnNetPortHistoryExtFecSES	1.3.6.1.4.1.2544.1.12.34.2.2.1.3	Integer32	read-only	FEC SES.
NUM f3OtnNetPortHistoryExtFecCorrErr	1.3.6.1.4.1.2544.1.12.34.2.2.1.4	PerfCounter64	read-only	FEC Corrected Seconds.
NUM f3OtnNetPortHistoryExtFecUncorrBlockErr	1.3.6.1.4.1.2544.1.12.34.2.2.1.5	PerfCounter64	read-only	FEC Uncorrected Block Errors.
I32 f3OtnNetPortHistoryExtOtuErrSec	1.3.6.1.4.1.2544.1.12.34.2.2.1.6	Integer32	read-only	OTU Errored Seconds.
I32 f3OtnNetPortHistoryExtOtuSES	1.3.6.1.4.1.2544.1.12.34.2.2.1.7	Integer32	read-only	OTU SES.
NUM f3OtnNetPortHistoryExtOtuBBE	1.3.6.1.4.1.2544.1.12.34.2.2.1.8	PerfCounter64	read-only	OTU BBE.
I32 f3OtnNetPortHistoryExtOtuUAS	1.3.6.1.4.1.2544.1.12.34.2.2.1.9	Integer32	read-only	OTU UAS.
I32 f3OtnNetPortHistoryExtOduErrSec	1.3.6.1.4.1.2544.1.12.34.2.2.1.10	Integer32	read-only	ODU Errored Seconds.
I32 f3OtnNetPortHistoryExtOduSES	1.3.6.1.4.1.2544.1.12.34.2.2.1.11	Integer32	read-only	ODU SES.
NUM f3OtnNetPortHistoryExtOduBBE	1.3.6.1.4.1.2544.1.12.34.2.2.1.12	PerfCounter64	read-only	ODU BBE.
I32 f3OtnNetPortHistoryExtOduUAS	1.3.6.1.4.1.2544.1.12.34.2.2.1.13	Integer32	read-only	ODU UAS.
f3OtnConformance	1.3.6.1.4.1.2544.1.12.34.3
f3OtnCompliances	1.3.6.1.4.1.2544.1.12.34.3.1
f3OtnCompliance	1.3.6.1.4.1.2544.1.12.34.3.1.1			Describes the requirements for conformance to the F3-OTN-MIB compliance.
f3OtnGroups	1.3.6.1.4.1.2544.1.12.34.3.2
f3OtnConfigGroup	1.3.6.1.4.1.2544.1.12.34.3.2.1			A collection of objects used to manage the OTN.
f3OtnPerfGroup	1.3.6.1.4.1.2544.1.12.34.3.2.2			A collection of objects used to manage the OTN PM.

RFC description

Manages Optical Transport Network (OTN) facility configuration and performance monitoring for ADVA F3 product lines.

Start monitoring ADVA Optical Networking FSP150CM/CC (F3 platform) carrier Ethernet device (OTN/G.709 transport) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download F3-OTN-MIB