DKSF-253-5-X-A-X :: npIoSinglePulseDuration

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › DKSF-253-5-X-A-X › npIoSinglePulseDuration

npIoSinglePulseDuration

Module: DKSF-253-5-X-A-X

OID (symbolic): DKSF-253-5-X-A-X::npIoSinglePulseDuration

OID (numeric): 1.3.6.1.4.1.25728.8900.1.1.12

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Set duration of single pulse on IO output line, 100ms to 25500ms, min. step is 100ms

What is npIoSinglePulseDuration?

Sets how long (in milliseconds, 100 to 25500 in 100ms steps) a single output pulse triggered on this line should last, for example 2000 for a 2-second relay pulse to momentarily unlock a door.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25728.8900.1.1.12
snmpwalk -v2c -c public <target> DKSF-253-5-X-A-X::npIoSinglePulseDuration

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.25728.8900.1.1.12.1
snmpget -v2c -c public <target> DKSF-253-5-X-A-X::npIoSinglePulseDuration.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.25728.8900.1.1.12.1 i <value>

Start monitoring Alentis Electronics NetPing remote sensing/control device with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DKSF-253-5-X-A-X::npIoSinglePulseDuration OID value, configure state conditions and alerts, and monitor any Alentis Electronics NetPing remote sensing/control device from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.25728lightcomDKSF-201-9-X-X-1
1.3.6.1.4.1.25728.8900npIoDKSF-201-9-X-X-1
1.3.6.1.4.1.25728.8900.1npIoTableDKSF-201-9-X-X-1
1.3.6.1.4.1.25728.8900.1.1npIoEntryDKSF-201-9-X-X-1
Numeric OIDNameModule
1.3.6.1.4.1.25728.8900.1.1.12npIoSinglePulseDurationDKSF-253-5-X-A-X