DKSF-253-5-X-A-X

All MIBs › DKSF-253-5-X-A-X

Organization: Alentis Electronics

Last Updated: 2014-11-19

Category: Domain: Environmental Monitoring, Vendor: NetPing/DKSF

Description: MIB for DKSF-253 NetPing device firmware 5.x variant A providing sensor monitoring and relay control objects.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is DKSF-253-5-X-A-X?

DKSF-253-5-X-A-X is an Alentis Electronics proprietary MIB (enterprise OID 25728, NetPing product line) for remote sensing/control and metering. Its objects cover an I/O table (line number, input/output level, memo, pulse counter, single-pulse duration/start), a trap-configuration set (line, level, memo, four configurable input-level triggers), an I/O trap notification, an electricity-metering table (index, pulses-per-kWh, power, energy, hundredths-of-energy), and a soft-reboot action. As a status/performance MIB it lets an administrator watch digital I/O state and metered energy consumption, and get alerted on I/O-level changes, on an Alentis NetPing device. It is deployed on Alentis Electronics NetPing remote sensing/control devices. Engineers can download the DKSF-253-5-X-A-X file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in DKSF-253-5-X-A-X. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Alentis Electronics NetPing remote sensing/control devices

Monitoring Examples

An administrator receives npIoTrap and reads npIoLevelIn to confirm which digital input changed state on an Alentis NetPing device.

What Can Be Monitored

digital I/O state and metered energy consumption

Imported Objects

From RFC1155-SMI

enterprises

From SNMPv2-MIB

snmpTraps

OBJECT-IDENTITY

From SNMPv2-SMI

Counter32
Counter64
Gauge32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks
mib-2

From SNMPv2-TC

DisplayString
TEXTUAL-CONVENTION
TimeStamp
TruthValue

How to Use in IPNetwork Monitor

Example using npIoPulseCounter OID:

Select an Alentis Electronics NetPing remote sensing/control device as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type npIoPulseCounter into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the pulse Counter (counts positive fronts) Write 0 to reset. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
lightcom	1.3.6.1.4.1.25728
netPing	1.3.6.1.4.1.25728.50			MIB for NetPing remote sensing and control
npReboot	1.3.6.1.4.1.25728.911
INT npSoftReboot	1.3.6.1.4.1.25728.911.1	INTEGER	read-write	Write 1 to reboot device after current operations completition
INT npResetStack	1.3.6.1.4.1.25728.911.2	INTEGER	read-write	Write 1 to re-initialize network stack
INT npForcedReboot	1.3.6.1.4.1.25728.911.3	INTEGER	read-write	Write 1 to immediate forced reboot
npIo	1.3.6.1.4.1.25728.8900
npIoTable	1.3.6.1.4.1.25728.8900.1		not-accessible	Digital Input/output Table
npIoEntry	1.3.6.1.4.1.25728.8900.1.1		not-accessible	Digital Input/output Table Row
INT npIoLineN	1.3.6.1.4.1.25728.8900.1.1.1	INTEGER	read-only	Number of IO line, from 1 to max supported
INT npIoLevelIn	1.3.6.1.4.1.25728.8900.1.1.2	INTEGER	read-only	Input level, 0 or 1
INT npIoLevelOut	1.3.6.1.4.1.25728.8900.1.1.3	INTEGER	read-write	Output level, 0 or 1
STR npIoMemo	1.3.6.1.4.1.25728.8900.1.1.6	DisplayString	read-only	IO line memo
C32 npIoPulseCounterEx	1.3.6.1.4.1.25728.8900.1.1.9	Counter32	read-write	Pulse Counter (counts positive fronts) Write 0 to reset.
INT npIoSinglePulseDuration	1.3.6.1.4.1.25728.8900.1.1.12	INTEGER	read-write	Set duration of single pulse on IO output line, 100ms to 25500ms, min. step is 100ms
INT npIoSinglePulseStart	1.3.6.1.4.1.25728.8900.1.1.13	INTEGER	read-write	Write 1 to start single pulse on IO output. Output will be inverted for time, specified by npIoSinglePulseDuration
npIoTraps	1.3.6.1.4.1.25728.8900.2
npIoTrapPrefix	1.3.6.1.4.1.25728.8900.2.0
NTF npIoTrap	1.3.6.1.4.1.25728.8900.2.0.1			Input state of IO line is changed
INT npIoTrapLineN	1.3.6.1.4.1.25728.8900.2.1	INTEGER	read-only	Trap data, Number of IO line
INT npIoTrapLevelIn	1.3.6.1.4.1.25728.8900.2.2	INTEGER	read-only	Trap data, new Input level, 0 or 1
STR npIoTrapMemo	1.3.6.1.4.1.25728.8900.2.6	DisplayString	read-only	Trap data, IO line memo
INT npIoTrapLevelIn1	1.3.6.1.4.1.25728.8900.2.21	INTEGER	read-only	Trap data, current Input level Line 1, value 0 or 1
INT npIoTrapLevelIn2	1.3.6.1.4.1.25728.8900.2.22	INTEGER	read-only	Trap data, current Input level Line 2, value 0 or 1
INT npIoTrapLevelIn3	1.3.6.1.4.1.25728.8900.2.23	INTEGER	read-only	Trap data, current Input level Line 3, value 0 or 1
INT npIoTrapLevelIn4	1.3.6.1.4.1.25728.8900.2.24	INTEGER	read-only	Trap data, current Input level Line 4, value 0 or 1
npElecMeter	1.3.6.1.4.1.25728.9700
npElecTable	1.3.6.1.4.1.25728.9700.1		not-accessible	Electricity Meter Table
npElecEntry	1.3.6.1.4.1.25728.9700.1.1		not-accessible	Electricity Meter Table Table Row
INT npElecIndex	1.3.6.1.4.1.25728.9700.1.1.1	INTEGER	read-only	Number of elec.meter, associated with IO line
INT npElecPulsesPerKwh	1.3.6.1.4.1.25728.9700.1.1.2	INTEGER	read-write	Pulses on IO line input per 1 kWh of consumed energy
G32 npElecPower	1.3.6.1.4.1.25728.9700.1.1.3	Gauge32	read-only	Power, Watts, based on pulse rate/interval, 5 minute average
C32 npElecEnergy	1.3.6.1.4.1.25728.9700.1.1.4	Counter32	read-write	Energy counter, kWh, based on pulse count Write 0 to clear (npElecEnergy, npElecEnergy100 and npIoPulseCounter at once)
C32 npElecEnergy100	1.3.6.1.4.1.25728.9700.1.1.5	Counter32	read-write	Energy counter, kWh*100, based on pulse count Write 0 to clear (npElecEnergy, npElecEnergy100 and npIoPulseCounter at once)

RFC description

Manages NetPing remote sensing and environmental monitoring including I/O control and power metering.

Start monitoring Alentis Electronics NetPing remote sensing/control device with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download DKSF-253-5-X-A-X