DKSF-253-6-X-A-X

All MIBs › DKSF-253-6-X-A-X

Organization: Alentis Electronics

Last Updated: 2015-09-29

Category: Domain: Environmental Monitoring, Vendor: NetPing/DKSF

Description: MIB for DKSF-253 NetPing device firmware 6.x variant A providing environmental monitoring and control objects.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is DKSF-253-6-X-A-X?

This is a NetPing enterprise MIB (DKSF-253 variant, firmware 6.x) for a NetPing remote sensing and control device used for environmental and I/O monitoring in equipment racks or utility closets. It exposes a generic I/O line table covering digital input/output levels, pulse counting, and associated trap configuration for each I/O line on the device. Its monitoring focus is hardware status of connected sensors and contacts: reading input levels (e.g., door contacts, leak sensors), pulse counts (e.g., from utility meters), and generating traps when an input level crosses a configured threshold. As a self-contained hardware I/O device MIB it has no apparent dependency on other standard MIBs. It is typically deployed in server rooms, telecom cabinets, or remote sites where a small NetPing appliance provides remote-sensing inputs and relay-style control over a network link. Engineers can download the DKSF-253-6-X-A-X file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in DKSF-253-6-X-A-X. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

NetPing DKSF-253 remote sensing/IO device

Monitoring Examples

An administrator can poll npIoTable/npIoEntry, indexed by npIoLineN, to read npIoLevelIn and npIoLevelOut for each I/O line, revealing the current state of a connected sensor such as a door or water-leak contact. The npIoPulseCounter and npIoSinglePulseDuration objects can be used to track pulse-based inputs like a utility meter, while npIoTrapLineN and npIoTrapLevelIn configure which line transitions generate an SNMP trap, for example alerting when a door contact opens unexpectedly.

What Can Be Monitored

digital input/output level per line
pulse counter and pulse duration
trap-triggering input level per line

Imported Objects

From RFC1155-SMI

enterprises

From SNMPv2-MIB

snmpTraps

OBJECT-IDENTITY

From SNMPv2-SMI

Counter32
Counter64
Gauge32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks
mib-2

From SNMPv2-TC

DisplayString
TEXTUAL-CONVENTION
TimeStamp
TruthValue

How to Use in IPNetwork Monitor

Example using npIoPulseCounter OID:

Select a NetPing DKSF-253 remote sensing/IO device as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type npIoPulseCounter into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the pulse Counter (counts positive fronts) Write 0 to reset. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
lightcom	1.3.6.1.4.1.25728
netPing	1.3.6.1.4.1.25728.253			MIB for NetPing remote sensing and control
npReboot	1.3.6.1.4.1.25728.911
INT npSoftReboot	1.3.6.1.4.1.25728.911.1	INTEGER	read-write	Write 1 to reboot device after current operations completition
INT npResetStack	1.3.6.1.4.1.25728.911.2	INTEGER	read-write	Write 1 to re-initialize network stack
INT npForcedReboot	1.3.6.1.4.1.25728.911.3	INTEGER	read-write	Write 1 to immediate forced reboot
npIo	1.3.6.1.4.1.25728.8900
npIoTable	1.3.6.1.4.1.25728.8900.1		not-accessible	Digital Input/output Table
npIoEntry	1.3.6.1.4.1.25728.8900.1.1		not-accessible	Digital Input/output Table Row
INT npIoLineN	1.3.6.1.4.1.25728.8900.1.1.1	INTEGER	read-only	Number of IO line, from 1 to max supported
INT npIoLevelIn	1.3.6.1.4.1.25728.8900.1.1.2	INTEGER	read-only	Input level, 0 or 1
INT npIoLevelOut	1.3.6.1.4.1.25728.8900.1.1.3	INTEGER	read-write	Output level, 0 or 1. Write -1 to flip output.
STR npIoMemo	1.3.6.1.4.1.25728.8900.1.1.6	DisplayString	read-only	IO line memo
C32 npIoPulseCounterEx	1.3.6.1.4.1.25728.8900.1.1.9	Counter32	read-write	Pulse Counter (counts positive fronts) Write 0 to reset.
INT npIoSinglePulseDuration	1.3.6.1.4.1.25728.8900.1.1.12	INTEGER	read-write	Set duration of single pulse on IO output line, 100ms to 25500ms, min. step is 100ms
INT npIoSinglePulseStart	1.3.6.1.4.1.25728.8900.1.1.13	INTEGER	read-write	Write 1 to start single pulse on IO output. Output will be inverted for time, specified by npIoSinglePulseDuration
npIoTraps	1.3.6.1.4.1.25728.8900.2
npIoTrapPrefix	1.3.6.1.4.1.25728.8900.2.0
NTF npIoTrap	1.3.6.1.4.1.25728.8900.2.0.1			Input state of IO line is changed
INT npIoTrapLineN	1.3.6.1.4.1.25728.8900.2.1	INTEGER	read-only	Trap data, Number of IO line
INT npIoTrapLevelIn	1.3.6.1.4.1.25728.8900.2.2	INTEGER	read-only	Trap data, new Input level, 0 or 1
STR npIoTrapMemo	1.3.6.1.4.1.25728.8900.2.6	DisplayString	read-only	Trap data, IO line memo
INT npIoTrapLevelIn1	1.3.6.1.4.1.25728.8900.2.21	INTEGER	read-only	Trap data, current Input level Line 1, value 0 or 1
INT npIoTrapLevelIn2	1.3.6.1.4.1.25728.8900.2.22	INTEGER	read-only	Trap data, current Input level Line 2, value 0 or 1
INT npIoTrapLevelIn3	1.3.6.1.4.1.25728.8900.2.23	INTEGER	read-only	Trap data, current Input level Line 3, value 0 or 1
INT npIoTrapLevelIn4	1.3.6.1.4.1.25728.8900.2.24	INTEGER	read-only	Trap data, current Input level Line 4, value 0 or 1
npElecMeter	1.3.6.1.4.1.25728.9700
npElecTable	1.3.6.1.4.1.25728.9700.1		not-accessible	Electricity Meter Table
npElecEntry	1.3.6.1.4.1.25728.9700.1.1		not-accessible	Electricity Meter Table Table Row
INT npElecIndex	1.3.6.1.4.1.25728.9700.1.1.1	INTEGER	read-only	Number of elec.meter, associated with IO line
INT npElecPulsesPerKwh	1.3.6.1.4.1.25728.9700.1.1.2	INTEGER	read-write	Pulses on IO line input per 1 kWh of consumed energy
G32 npElecPower	1.3.6.1.4.1.25728.9700.1.1.3	Gauge32	read-only	Power, Watts, based on pulse rate/interval, 5 minute average
C32 npElecEnergy	1.3.6.1.4.1.25728.9700.1.1.4	Counter32	read-write	Energy counter, kWh, based on pulse count
C32 npElecEnergy100	1.3.6.1.4.1.25728.9700.1.1.5	Counter32	read-write	Energy counter, kWh*100, based on pulse count

RFC description

NetPing remote sensing and control unit for environmental monitoring and IO management.

Start monitoring NetPing DKSF-253 remote sensing/IO device with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download DKSF-253-6-X-A-X