DES2218-MIB

All MIBs › DES2218-MIB

Category: VLAN and Bridging, Vendor: D-Link

Description: Manages D-Link DES-2218 smart switch port configuration, VLANs, and L2 monitoring.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is DES2218-MIB?

DES2218-MIB is a D-Link enterprise MIB for the DES-2218 smart switch, a fixed-configuration Layer 2 Ethernet switch, covering port configuration, VLAN assignment, and Layer 2 monitoring features. Though no sample objects were provided, based on its description it would expose per-port configuration settings, VLAN membership tables, and Layer 2 statistics or status indicators typical of small/mid-size managed switches. Such a MIB would primarily support monitoring of port operational status (link up/down, speed/duplex) and VLAN configuration correctness, contributing to basic hardware/interface health visibility on the switch rather than deep environmental sensor data. It likely complements or extends standard IF-MIB and BRIDGE-MIB/Q-BRIDGE-MIB objects for interface and VLAN representation, though the specific relationship cannot be confirmed without more detail. It would typically be deployed in small business or workgroup network environments using D-Link DES-2218 switches. Engineers can download the DES2218-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in DES2218-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

D-Link DES-2218 smart switch

Monitoring Examples

No sample objects were supplied for this module, so specific table or object names cannot be confirmed; a typical use would involve polling per-port link status and VLAN membership to detect a misconfigured VLAN or a down switch port, but exact OID names cannot be verified from the available data.

What Can Be Monitored

port configuration
VLAN membership
Layer 2 port status

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

Counter
IpAddress
TimeTicks
enterprises

From RFC1213-MIB

DisplayString
PhysAddress

OIDs

OID symbolic	OID numeric	Type	Access	Description
agentBasicConfig	1.3.6.1.4.1.171.11.1.2
agentBasicInfo	1.3.6.1.4.1.171.11.1.1
STR agentBootFile	1.3.6.1.4.1.171.11.1.2.3	DisplayString	read-write	The name of the file to be downloaded from the TFTP server when software update is enabled.
agentConfigInfo	1.3.6.1.4.1.171.11.1
STR agentHwRevision	1.3.6.1.4.1.171.11.1.1.3	DisplayString	read-only	This is a textual description of the hardware revision. The display string should look like 'Rev. A1'
INT agentIpBootProtocol	1.3.6.1.4.1.171.11.1.3.4	INTEGER	read-write	The software download protocol used for software update.
IP agentIpBootServerAddr	1.3.6.1.4.1.171.11.1.3.3	IpAddress	read-write	The IP Address of Boot Server.
INT agentIpGetIpFromBootpServer	1.3.6.1.4.1.171.11.1.3.5	INTEGER	read-write	This object indicates whether the agent get its system IP address from BootP server at start up.
IP agentIpIfAddress	1.3.6.1.4.1.171.11.1.3.2.1.2	IpAddress	read-write	The IP address of the interface.
IP agentIpIfDefaultRouter	1.3.6.1.4.1.171.11.1.3.2.1.4	IpAddress	read-write	The default gateway for this IP interface.
agentIpIfEntry	1.3.6.1.4.1.171.11.1.3.2.1		not-accessible	An agentIPIfEntry contains information about a particular IP interface.
INT agentIpIfIndex	1.3.6.1.4.1.171.11.1.3.2.1.1	INTEGER	read-only	This object uniquely identifies the IP interface number in agentIpIfTable. This value should never greater than agentIpNumOfIf
PHY agentIpIfMacAddr	1.3.6.1.4.1.171.11.1.3.2.1.5	PhysAddress	read-only	The MAC address of this IP interface. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length.
IP agentIpIfNetMask	1.3.6.1.4.1.171.11.1.3.2.1.3	IpAddress	read-write	The IP net mask for this interface.
agentIpIfTable	1.3.6.1.4.1.171.11.1.3.2		not-accessible	A list of IP interface entries supported by the agent.
INT agentIpIfType	1.3.6.1.4.1.171.11.1.3.2.1.6	INTEGER	read-only	The physical layer interface of the IP interface.
IP agentIpLastBootServerAddr	1.3.6.1.4.1.171.11.1.3.8	IpAddress	read-only	The last IP address used as Boot server IP address.
IP agentIpLastIpAddr	1.3.6.1.4.1.171.11.1.3.9	IpAddress	read-only	The last IP address used as the agent system IP address.
INT agentIpNumOfIf	1.3.6.1.4.1.171.11.1.3.1	INTEGER	read-only	The total number of IP interfaces supported by this agent.
agentIpProtoConfig	1.3.6.1.4.1.171.11.1.3
STR agentIpTrapManagerComm	1.3.6.1.4.1.171.11.1.3.10.1.2	DisplayString	read-write	The community string of the SNMP trap packet sent to the trap manager.
agentIpTrapManagerEntry	1.3.6.1.4.1.171.11.1.3.10.1		not-accessible	This entry contains the particular trap manager settings.
IP agentIpTrapManagerIpAddr	1.3.6.1.4.1.171.11.1.3.10.1.1	IpAddress	read-only	The IP address to receive SNMP traps from this device.
INT agentIpTrapManagerStatus	1.3.6.1.4.1.171.11.1.3.10.1.3	INTEGER	read-write	This object indicates whether or not the trap should be send to this trap manager.
agentIpTrapManagerTable	1.3.6.1.4.1.171.11.1.3.10		not-accessible	A list of trap manager entries to which to send SNMP traps .
IP agentIpUnauthAddr	1.3.6.1.4.1.171.11.1.3.6	IpAddress	read-only	The IP address of an unauthorized SNMP packet.
STR agentIpUnauthComm	1.3.6.1.4.1.171.11.1.3.7	DisplayString	read-only	The community string of an unauthorized SNMP packet.
INT agentMgmtProtocolCapability	1.3.6.1.4.1.171.11.1.1.4	INTEGER	read-only	The network management protocol(s) supported by this agent.
STR agentMibCapabilityDescr	1.3.6.1.4.1.171.11.1.1.5.1.2	DisplayString	read-only	The name of the MIB supported by the agent.
agentMibCapabilityEntry	1.3.6.1.4.1.171.11.1.1.5.1		not-accessible	A MIB capability entry contains objects describing a particular MIB supported by this agent.
INT agentMibCapabilityIndex	1.3.6.1.4.1.171.11.1.1.5.1.1	INTEGER	read-only	A list of agentMibCapabilityDescr entries.
agentMibCapabilityTable	1.3.6.1.4.1.171.11.1.1.5		not-accessible	A list of MIB capability entries supported by this agent.
INT agentMibCapabilityType	1.3.6.1.4.1.171.11.1.1.5.1.4	INTEGER	read-only	The type of the MIB specified in this entry.
INT agentMibCapabilityVersion	1.3.6.1.4.1.171.11.1.1.5.1.3	INTEGER	read-only	The version of the MIB specified in this entry.
INT agentOutOfBandBaudRateConfig	1.3.6.1.4.1.171.11.1.2.6	INTEGER	read-write	The baud rate setting for out of band connection. The baud rate for the console interface is always 9600.
STR agentOutOfBandDialNumber	1.3.6.1.4.1.171.11.1.2.7	DisplayString	read-write	The dial out phone number for out of band to establish a connection. This entry is used for reference only.
STR agentPromFwVersion	1.3.6.1.4.1.171.11.1.1.2	DisplayString	read-only	This is a textual description of the agent PROM firmware version and revision. If the version number is one and revision number is zero agentPromFwVersion would be 'Ver. 1.0'
INT agentRs232PortConfig	1.3.6.1.4.1.171.11.1.2.5	INTEGER	read-write	The current setting of RS-232C port. The RS-232C port can be configured as the console port or used for out-of-band connection.
STR agentRuntimeSwVersion	1.3.6.1.4.1.171.11.1.1.1	DisplayString	read-only	This is a textual description of the runtime software version and revision. If the version number is one and revision number is zero agentRuntimeSwVersion would be 'Ver. 1.0'
INT agentSwUpdateCtrl	1.3.6.1.4.1.171.11.1.2.2	INTEGER	read-write	Current status of software download control. The setting is effective the next time you reset or power on the hub.
INT agentSwUpdateMode	1.3.6.1.4.1.171.11.1.2.1	INTEGER	read-write	The download media used by the system to download the runtime software.
INT agentSystemReset	1.3.6.1.4.1.171.11.1.2.4	INTEGER	read-write	This object indicates the agent system reset state. Setting this object to no-reset(3) has no effect. Setting this object to reset(2) will reset the agent. The agent always returns no-reset(3) when this object is read.
des2218MIB	1.3.6.1.4.1.171.11.7.1
des2218series	1.3.6.1.4.1.171.11.7
des2218SwHub	1.3.6.1.4.1.171.10.7.2
dlink	1.3.6.1.4.1.171
dlink_Des2218Prod	1.3.6.1.4.1.171.10.7
dlink_Des2218ProdId	1.3.6.1.4.1.171.10.7.1
dlink_mgmt	1.3.6.1.4.1.171.11
dlink_products	1.3.6.1.4.1.171.10
NTF linkChangeEvent	1.3.6.1.4.1.171.0.1			The trap is sent whenever the link state of a port changes from link up to link down or from link down to link up
NTF portPartition	1.3.6.1.4.1.171.0.2			The trap is sent whenever the port state enter the Partion mode when more than 32 collisions occur while trasmitting.
INT swDevCtrlDisableLearningState	1.3.6.1.4.1.171.11.7.1.1.2.1	INTEGER	read-write	This Object indicate the switch hub wether or not learn any new addresses from the Ethernet ports.
INT swDevCtrlReset	1.3.6.1.4.1.171.11.7.1.1.2.2	INTEGER	read-write	This object indicates the switch hub reset state. Setting this object to no-reset(3) has no effect. Setting this object to reset(2) will reset the agent. The agent always returns no-reset(3) when this object is read.
INT swDevCtrlSpanningTree	1.3.6.1.4.1.171.11.7.1.1.2.3	INTEGER	read-write	This Object control the device to enable/disable spanning tree algorithm in the system initilization or reset.
swDeviceCtl	1.3.6.1.4.1.171.11.7.1.1.2
swDeviceInfo	1.3.6.1.4.1.171.11.7.1.1.1
swDevicePackage	1.3.6.1.4.1.171.11.7.1.1
STR swDevInfoDesc	1.3.6.1.4.1.171.11.7.1.1.1.3	DisplayString	read-only	A textual description of this switch hub.
INT swDevInfoDramSize	1.3.6.1.4.1.171.11.7.1.1.1.8	INTEGER	read-only	The DRAM size of the switch hub
OCT swDevInfoFrontPanelLedStatus	1.3.6.1.4.1.171.11.7.1.1.1.7	OCTET STRING	read-only	The current status of front panel LED.
STR swDevInfoHwRev	1.3.6.1.4.1.171.11.7.1.1.1.5	DisplayString	read-only	A textual description of the hardware revision of this switch bub.
INT swDevInfoNumOfPortOnUse	1.3.6.1.4.1.171.11.7.1.1.1.2	INTEGER	read-only	The number of ports in this switch hub connected to the segment or end stations.
INT swDevInfoPortType	1.3.6.1.4.1.171.11.7.1.1.1.4	INTEGER	read-only	The connector type of this port.
TIK swDevInfoSystemUpTime	1.3.6.1.4.1.171.11.7.1.1.1.6	TimeTicks	read-only	The value of sysUpTime at the time the switch entered its current operational state. If the current state was entered prior to the last re- initialization, then this object contains a zero value.
INT swDevInfoTotalNumOfPort	1.3.6.1.4.1.171.11.7.1.1.1.1	INTEGER	read-only	The number of ports within this switch hub. This value is the sum of the ports of each group within this switch hub.
CTR swPortBroadcastFramesReceived	1.3.6.1.4.1.171.11.7.1.2.3.1.9	Counter	read-only	The number of good broadcast frames received. Local and dropped packets increment the counter as well.
CTR swPortBytesReceived	1.3.6.1.4.1.171.11.7.1.2.3.1.3	Counter	read-only	The number of good bytes received. Local and dropped packets increment the counter as well.
CTR swPortBytesSent	1.3.6.1.4.1.171.11.7.1.2.3.1.4	Counter	read-only	The number of good bytes sent.
CTR swPortCollision	1.3.6.1.4.1.171.11.7.1.2.3.1.15	Counter	read-only	The number of Collisions
swPortCounterEntry	1.3.6.1.4.1.171.11.7.1.2.3.1		not-accessible	This entry include all the port Counter which support by DES3208, like Bytes received, Bytes Sent ...
INT swPortCounterGroupIndex	1.3.6.1.4.1.171.11.7.1.2.3.1.1	INTEGER	read-only	This object identifies the port within the group for which this entry contains infomation.
INT swPortCounterIndex	1.3.6.1.4.1.171.11.7.1.2.3.1.2	INTEGER	read-only	This object indicate switch hub port number.
swPortCounterTable	1.3.6.1.4.1.171.11.7.1.2.3		not-accessible	A list of port MIB statistic Counter entries.
CTR swPortCRCError	1.3.6.1.4.1.171.11.7.1.2.3.1.11	Counter	read-only	The number of frames with valid packet length and CRC error or misaligned(odd number of nibbles) increment the counter as well.
INT swPortCtrlAdminState	1.3.6.1.4.1.171.11.7.1.2.2.1.3	INTEGER	read-write	Port control administration state.
INT swPortCtrlDuplexState	1.3.6.1.4.1.171.11.7.1.2.2.1.4	INTEGER	read-write	Indicating the port work in half/full duplex mode.
swPortCtrlEntry	1.3.6.1.4.1.171.11.7.1.2.2.1		not-accessible	This entry control the port state, like filter broadcast, linkstatus...
INT swPortCtrlFilterBcastState	1.3.6.1.4.1.171.11.7.1.2.2.1.6	INTEGER	read-write	Port control filter broadcast to all port or discard.
INT swPortCtrlForwardUnknowState	1.3.6.1.4.1.171.11.7.1.2.2.1.7	INTEGER	read-write	Port control forward unknow packet state.
INT swPortCtrlGroupIndex	1.3.6.1.4.1.171.11.7.1.2.2.1.1	INTEGER	read-only	This object identifies the port within the group for which this entry contains infomation.
INT swPortCtrlIndex	1.3.6.1.4.1.171.11.7.1.2.2.1.2	INTEGER	read-only	This object indicate switch hub port number.
INT swPortCtrlLinkStatusAlarmState	1.3.6.1.4.1.171.11.7.1.2.2.1.5	INTEGER	read-write	Depending on this object to determine wether send a trap or not when link status change .
INT swPortCtrlNegotiationStatus	1.3.6.1.4.1.171.11.7.1.2.2.1.9	INTEGER	read-write	Depending on this object determine to enable NWAY or disable.
INT swPortCtrlPartitionStatus	1.3.6.1.4.1.171.11.7.1.2.2.1.8	INTEGER	read-write	Depending on this object determine to send a trap or not when the port was partition.
INT swPortCtrlSpeedStatus	1.3.6.1.4.1.171.11.7.1.2.2.1.10	INTEGER	read-write	Depending on this object to determining this port transmit rate is 10M bps or 100M bps.
swPortCtrlTable	1.3.6.1.4.1.171.11.7.1.2.2		not-accessible	A list of port state control entries.
CTR swPortFragments	1.3.6.1.4.1.171.11.7.1.2.3.1.13	Counter	read-only	The number of good bytes received. Local and dropped packets increment the counter as well.
CTR swPortFrames1024To1522Bytes	1.3.6.1.4.1.171.11.7.1.2.3.1.22	Counter	read-only	The number of good packets with length between 1024 to 1522 bytes
CTR swPortFrames128To255Bytes	1.3.6.1.4.1.171.11.7.1.2.3.1.19	Counter	read-only	The number of good packets with length between 128 to 255 bytes
CTR swPortFrames256To511Bytes	1.3.6.1.4.1.171.11.7.1.2.3.1.20	Counter	read-only	The number of good packets with length between 256 to 511 bytes
CTR swPortFrames512To1023Bytes	1.3.6.1.4.1.171.11.7.1.2.3.1.21	Counter	read-only	The number of good packets with length between 512 to 1023 bytes
CTR swPortFrames64Bytes	1.3.6.1.4.1.171.11.7.1.2.3.1.17	Counter	read-only	The number of good packets with length of 64 bytes
CTR swPortFrames65To127Bytes	1.3.6.1.4.1.171.11.7.1.2.3.1.18	Counter	read-only	The number of good packets with length between 65 to 127 bytes
CTR swPortFramesReceived	1.3.6.1.4.1.171.11.7.1.2.3.1.5	Counter	read-only	The number of good frames received. Local and dropped packets increment the counter as well.
CTR swPortFramesSent	1.3.6.1.4.1.171.11.7.1.2.3.1.6	Counter	read-only	The number of good frames sent.
INT swPortInfoDuplexMode	1.3.6.1.4.1.171.11.7.1.2.1.1.6	INTEGER	read-only	This Object indicate the port work in which duplex mode.
swPortInfoEntry	1.3.6.1.4.1.171.11.7.1.2.1.1		not-accessible	This entry contains the port information, like porttype, linkstatus...
INT swPortInfoGroupIndex	1.3.6.1.4.1.171.11.7.1.2.1.1.1	INTEGER	read-only	This object identifies the port within the group for which this entry contains infomation.
INT swPortInfoIndex	1.3.6.1.4.1.171.11.7.1.2.1.1.2	INTEGER	read-only	This object indicate switch hub port number.
INT swPortInfoLinkStatus	1.3.6.1.4.1.171.11.7.1.2.1.1.5	INTEGER	read-only	This Object indicate the port link test status.
INT swPortInfoNegotiationStatus	1.3.6.1.4.1.171.11.7.1.2.1.1.7	INTEGER	read-only	This Object indicate the port work in auto negotiation enabled or disabled.
INT swPortInfoPartitionStatus	1.3.6.1.4.1.171.11.7.1.2.1.1.4	INTEGER	read-only	This Object indicate the port partition status.
INT swPortInfoSpeedStatus	1.3.6.1.4.1.171.11.7.1.2.1.1.8	INTEGER	read-only	This Object indicate the port trasmit rate is in 10M bps or 100M bps .
swPortInfoTable	1.3.6.1.4.1.171.11.7.1.2.1		not-accessible	A list of port information entries.
INT swPortInfoType	1.3.6.1.4.1.171.11.7.1.2.1.1.3	INTEGER	read-only	The connector type of this port.
CTR swPortJabber	1.3.6.1.4.1.171.11.7.1.2.3.1.14	Counter	read-only	The number of frames with length more than 1518 bytes and with CRC error or misaligned.
CTR swPortLateCollision	1.3.6.1.4.1.171.11.7.1.2.3.1.16	Counter	read-only	The number of Late Collision(collision occurring later than 576th transmitted bit
CTR swPortMACRxError	1.3.6.1.4.1.171.11.7.1.2.3.1.23	Counter	read-only	The number of frames with RX MAC Error
CTR swPortMulticastFramesReceived	1.3.6.1.4.1.171.11.7.1.2.3.1.10	Counter	read-only	The number of good multicast frames received. Local and dropped packets increment the counter as well.
CTR swPortOversizeFrames	1.3.6.1.4.1.171.11.7.1.2.3.1.12	Counter	read-only	The number of good frames with length more than 1518 bytes ( or 1522 bytes for LongEn = 1).
swPortPackage	1.3.6.1.4.1.171.11.7.1.2
CTR swPortTotalBytesReceived	1.3.6.1.4.1.171.11.7.1.2.3.1.7	Counter	read-only	The number of bytes received(good and bad).
CTR swPortTotalFramesReceived	1.3.6.1.4.1.171.11.7.1.2.3.1.8	Counter	read-only	The number of frames bytes received(good and bad).

RFC description

Manages D-Link DES2218 switch hub with support for hardware/software versions, runtime configuration, and protocol capabilities.

Start monitoring D-Link DES-2218 smart switch with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download DES2218-MIB

What Is DES2218-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description