DASAN-TS-1000-MIB

All MIBs › DASAN-TS-1000-MIB

Organization: DASAN Co., Ltd.

Last Updated: 2006-03-21

Category: DASAN Networks

Description: Manages configuration and status objects for the DASAN TS-1000 terminal server platform.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is DASAN-TS-1000-MIB?

DASAN-TS-1000-MIB is a vendor-specific MIB from DASAN Co. that manages the TS-1000 media-converter/terminal-server platform, confirming the hint's framing of it as a configuration and status MIB for that device line. It exposes per-port status through dsTs1000InfoTable (indexed by dsPortModuleIndex and ifIndex), reporting dsTs1000TPLinkStatus and dsTs1000FiberLinkStatus (copper/fiber link up-down), dsTs1000PowerStatus, dsTs1000TroubleStatus, dsTs1000SpeedStatus/dsTs1000DuplexStatus/dsTs1000NegoStatus for negotiated link parameters, and vendor/model identification via dsTs1000VendorCode and dsTs1000ModelNumber; a separate dsTs1000LoopbackTable tracks loopback test mode, start/end addresses, and success/failure counts. It depends on DASAN-SWITCH-MIB (dsSwitchModules, dsPortModuleIndex) and IF-MIB's ifIndex for table indexing, and it defines notifications (dsTs1000TpLinkStatusChanged, dsTs1000PowerStatusChanged, dsTs1000LoopbackStatusChanged) for state-change alerting. It is deployed on DASAN media-converter/terminal-server modules within DASAN switch chassis, where administrators can download the DASAN-TS-1000-MIB file to load it into their MIB browser for tracking fiber/copper link and power health.

IPNetwork Monitor allows you to monitor SNMP objects defined in DASAN-TS-1000-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

DASAN TS-1000 media converter / terminal server modules

Monitoring Examples

An operator polls dsTs1000InfoTable to check dsTs1000FiberLinkStatus and dsTs1000PowerStatus for a given port/module pair; a dsTs1000PowerStatusChanged notification paired with dsTs1000TroubleStatus showing 'abnormal' would indicate the media converter has lost power or entered a fault state requiring physical inspection.

What Can Be Monitored

copper/fiber link status
power status
loopback test mode and results
negotiated speed/duplex/auto-negotiation state
vendor/model identification
link and power status-change notifications

Imported Objects

From DASAN-SMI

dasanMgmt

OBJECT-IDENTITY

From DASAN-SWITCH-MIB

dsPortModuleIndex	OBJECT-TYPE
dsSwitchModules	OBJECT-IDENTITY

From IF-MIB

ifIndex

OBJECT-TYPE

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Counter64
Gauge32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks
mib-2

From SNMPv2-TC

AutonomousType
DisplayString
PhysAddress
RowStatus
TEXTUAL-CONVENTION
TestAndIncr
TimeStamp
TruthValue

How to Use in IPNetwork Monitor

Example using dsTs1000TPLinkStatus OID:

Select a DASAN TS-1000 media converter/terminal server module as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type dsTs1000TPLinkStatus into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The status of Tx link. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is an INTEGER-type OID, Value bounds is the most useful condition here — trigger an alert if the value is anything other than 'up', since that indicates the condition this object reports has changed to one worth investigating. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
dsTs1000MIB	1.3.6.1.4.1.6296.9.1.1.2.15			.
dsTs1000Info	1.3.6.1.4.1.6296.9.1.1.2.15.1
dsTs1000InfoTable	1.3.6.1.4.1.6296.9.1.1.2.15.1.1		not-accessible	.
dsTs1000InfoEntry	1.3.6.1.4.1.6296.9.1.1.2.15.1.1.1		not-accessible	.
INT dsTs1000TPLinkStatusEx	1.3.6.1.4.1.6296.9.1.1.2.15.1.1.1.1	INTEGER	read-only	The status of Tx link.
INT dsTs1000FiberLinkStatus	1.3.6.1.4.1.6296.9.1.1.2.15.1.1.1.2	INTEGER	read-only	The status of Fiber.
INT dsTs1000PowerStatus	1.3.6.1.4.1.6296.9.1.1.2.15.1.1.1.3	INTEGER	read-only	The status of power.
INT dsTs1000LoopbackStatus	1.3.6.1.4.1.6296.9.1.1.2.15.1.1.1.4	INTEGER	read-only	The status of loopback test.
INT dsTs1000TroubleStatus	1.3.6.1.4.1.6296.9.1.1.2.15.1.1.1.5	INTEGER	read-only	The status of media converter.
INT dsTs1000FEFIStatus	1.3.6.1.4.1.6296.9.1.1.2.15.1.1.1.6	INTEGER	read-only	Whether support of not about Fefi.
INT dsTs1000OptionBStatus	1.3.6.1.4.1.6296.9.1.1.2.15.1.1.1.7	INTEGER	read-only	Whether support of net about the option B of media converter.
INT dsTs1000SpeedStatus	1.3.6.1.4.1.6296.9.1.1.2.15.1.1.1.8	INTEGER	read-only	The speed. bps
INT dsTs1000DuplexStatus	1.3.6.1.4.1.6296.9.1.1.2.15.1.1.1.9	INTEGER	read-only	The duplex.
INT dsTs1000NegoStatus	1.3.6.1.4.1.6296.9.1.1.2.15.1.1.1.10	INTEGER	read-only	The status of nego.
INT dsTs1000IFNumStatus	1.3.6.1.4.1.6296.9.1.1.2.15.1.1.1.11	INTEGER	read-only	The number of terminal ports.
OCT dsTs1000VendorCode	1.3.6.1.4.1.6296.9.1.1.2.15.1.1.1.12	OCTET STRING	read-only	The OUI of vendor.
OCT dsTs1000ModelNumber	1.3.6.1.4.1.6296.9.1.1.2.15.1.1.1.13	OCTET STRING	read-only	The number of model.
dsTs1000LoopbackTable	1.3.6.1.4.1.6296.9.1.1.2.15.1.2		not-accessible	.
dsTs1000LoopbackEntry	1.3.6.1.4.1.6296.9.1.1.2.15.1.2.1		not-accessible	.
INT dsTs1000LpMode	1.3.6.1.4.1.6296.9.1.1.2.15.1.2.1.1	INTEGER	read-only	.
OCT dsTs1000LpStart	1.3.6.1.4.1.6296.9.1.1.2.15.1.2.1.2	OCTET STRING	read-only	.
OCT dsTs1000LpEnd	1.3.6.1.4.1.6296.9.1.1.2.15.1.2.1.3	OCTET STRING	read-only	.
INT dsTs1000LpCount	1.3.6.1.4.1.6296.9.1.1.2.15.1.2.1.4	INTEGER	read-write	.
INT dsTs1000LpSuccess	1.3.6.1.4.1.6296.9.1.1.2.15.1.2.1.5	INTEGER	read-only	.
INT dsTs1000LpFail	1.3.6.1.4.1.6296.9.1.1.2.15.1.2.1.6	INTEGER	read-only	.
INT dsTs1000LpStatus	1.3.6.1.4.1.6296.9.1.1.2.15.1.2.1.7	INTEGER	read-write	.
dsTs1000Notification	1.3.6.1.4.1.6296.9.1.1.2.15.1.3
NTF dsTs1000TpLinkStatusChanged	1.3.6.1.4.1.6296.9.1.1.2.15.1.3.1			.
NTF dsTs1000PowerStatusChanged	1.3.6.1.4.1.6296.9.1.1.2.15.1.3.2			.
NTF dsTs1000LoopbackStatusChanged	1.3.6.1.4.1.6296.9.1.1.2.15.1.3.3			.
NTF dsTs1000FEFIChanged	1.3.6.1.4.1.6296.9.1.1.2.15.1.3.4			.
NTF dsTs1000OptionBStatusChanged	1.3.6.1.4.1.6296.9.1.1.2.15.1.3.5			.

RFC description

DASAN TS-1000 transceiver link status and fiber optical interface monitoring.

Start monitoring DASAN TS-1000 media converter/terminal server module with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download DASAN-TS-1000-MIB