DASAN-ACCESS-MIB

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › DASAN-ACCESS-MIB

Organization: DASAN Networks

Last Updated: 2005-06-11

Category: DASAN Networks

Description: Manages DASAN Networks broadband access concentrator port and subscriber configuration.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is DASAN-ACCESS-MIB?

DASAN-ACCESS-MIB is a vendor MIB from DASAN Networks defining the Access Gateway Management Information Base for its broadband access concentrator platforms. No sample objects were available in the supplied excerpt, so specific leaf names cannot be confirmed, but as an access gateway MIB it would be expected to expose subscriber port configuration, line/port operational status, and aggregate traffic or session statistics. It would be used to monitor the hardware and service status of access ports, such as port up/down state, subscriber line synchronization, and possibly card/module presence in the access concentrator chassis. It would likely depend on or complement other DASAN access-technology MIBs (such as G.fast or MGCP modules) that layer technology-specific detail on top of this base gateway MIB. It is typically deployed by broadband service providers using DASAN access concentrators to aggregate residential or business subscriber lines. Engineers can download the DASAN-ACCESS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in DASAN-ACCESS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

  • DASAN Networks broadband access concentrator/gateway

Monitoring Examples

No specific object or table names were provided in the supplied excerpt, so a concrete polling example with real leaf names cannot be honestly constructed. In general, an operator managing a DASAN access gateway would expect to poll per-port/per-slot status to detect a subscriber line going out of sync or a line card losing power. Confirming exact object names would require the full MIB source.

Imported Objects

From DASAN-SMI

dasanMgmtOBJECT-IDENTITY

From IF-MIB

InterfaceIndex

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

BITS
Counter32
Gauge32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32
mib-2

From SNMPv2-TC

AutonomousType
DisplayString
RowStatus
TEXTUAL-CONVENTION
TestAndIncr
TimeStamp
OIDs

RFC description

DASAN vendor-private MIB for managing access network systems and services.

Start monitoring DASAN Networks broadband access concentrator/gateway with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download DASAN-ACCESS-MIB