DASAN-SWITCH-MIB

All MIBs › DASAN-SWITCH-MIB

Organization: Dasan Co., Ltd.

Last Updated: 2001-07-27

Category: LAN Management

Description: Manages Dasan switch port, VLAN, trunk, and forwarding configuration objects.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is DASAN-SWITCH-MIB?

DASAN-SWITCH-MIB is a vendor-specific MIB from Dasan Networks (Dasan Zhone) covering the configuration and operational management of its Ethernet switch product line, including port, VLAN, trunk/link-aggregation, and forwarding-table objects. It exposes configuration-oriented data (port settings, VLAN membership, trunk grouping) alongside operational state reflecting the switch's current forwarding behavior. In monitoring terms it is used primarily to check the software/configuration status of the switch, such as which VLANs and trunks are active and how ports are currently forwarding traffic, complementing standard IF-MIB interface counters. It typically works alongside the standard IETF BRIDGE-MIB and IF-MIB for interface- and bridging-level detail this vendor MIB does not duplicate. It is deployed on Dasan managed Ethernet switches in enterprise and carrier-access network environments. Administrators unfamiliar with this vendor module often start by loading it into a DASAN-SWITCH-MIB MIB Browser session to explore the VLAN, trunk, and forwarding-table objects before scripting automated polling.

IPNetwork Monitor allows you to monitor SNMP objects defined in DASAN-SWITCH-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Dasan Networks (Dasan Zhone) managed Ethernet switches

Monitoring Examples

An operator would poll the switch's VLAN membership and trunk group tables to confirm a given port is assigned to the expected VLAN and trunk, and cross-check forwarding table entries against expected MAC-to-port mappings. A port unexpectedly missing from its configured VLAN, or a trunk group reporting an inactive member, would indicate misconfiguration or link failure. Because no concrete object names were available for this module, this description is necessarily generic rather than citing specific table/object identifiers.

What Can Be Monitored

port VLAN membership
trunk/link-aggregation group status
forwarding table entries
port configuration state

Imported Objects

From DASAN-DHCP-MIB

dasanSwitchMIBObjects	OBJECT-IDENTITY
dsSubnetConfName	OBJECT-TYPE

From DASAN-SMI

dasanEvents	OBJECT-IDENTITY
dasanMgmt	OBJECT-IDENTITY

From IF-MIB

ifIndex

OBJECT-TYPE

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From SNMPv2-SMI

Counter32
Counter64
Gauge32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks
Unsigned32

From SNMPv2-TC

DisplayString
MacAddress
PhysAddress
RowStatus

How to Use in IPNetwork Monitor

Example using dsCpuLoad10m OID:

Select a Dasan Networks (Dasan Zhone) managed Ethernet switch as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type dsCpuLoad10m into the Find box to locate it in the OID tree, then select it and click OK. It reports the switch's average CPU load over the last 10 minutes, as a percentage. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is an INTEGER-type OID, Value bounds is the most useful condition here — trigger an alert if CPU load exceeds 85%, a common warning threshold before sustained high load affects switching performance. Click Finish to create the monitor; you can adjust any parameter later.

See also: dsCpuLoad1m, dsCpuLoad5s

OIDs

OID symbolic	OID numeric	Type	Access	Description
dasanSwitchMIB	1.3.6.1.4.1.6296.9.1			The MIB module to describe Switch product.
INT dsCpuLoad10mEx	1.3.6.1.4.1.6296.9.1.1.1.10	INTEGER	read-only	The Avg. Value of CPU Load for 10 minutes
INT dsCpuLoad10misr	1.3.6.1.4.1.6296.9.1.1.1.13	INTEGER	read-only	The Avg. Value of CPU Load for 10 minutes(interupt service routine)
INT dsCpuLoad1mEx	1.3.6.1.4.1.6296.9.1.1.1.9	INTEGER	read-only	The Avg. Value of CPU Load for 1 minute
INT dsCpuLoad1misr	1.3.6.1.4.1.6296.9.1.1.1.12	INTEGER	read-only	The Avg. Value of CPU Load for 1 minute(interupt service routine)
INT dsCpuLoad5sEx	1.3.6.1.4.1.6296.9.1.1.1.8	INTEGER	read-only	The Avg. Value of CPU Load for 5 seconds
INT dsCpuLoad5sisr	1.3.6.1.4.1.6296.9.1.1.1.11	INTEGER	read-only	The Avg. Value of CPU Load for 5 seconds(interupt service routine)
OCT dsDNSDomainName	1.3.6.1.4.1.6296.9.1.1.2.18.1	OCTET STRING	read-write	.
IP dsDNSServerAddress	1.3.6.1.4.1.6296.9.1.1.2.18.10.1.3	InetAddress	read-write	.
IPt dsDNSServerAddressType	1.3.6.1.4.1.6296.9.1.1.2.18.10.1.2	InetAddressType	read-write	.
dsDNSServerEntry	1.3.6.1.4.1.6296.9.1.1.2.18.10.1		not-accessible	An entry containing Network Time Protocol information.
INT dsDNSServerIndex	1.3.6.1.4.1.6296.9.1.1.2.18.10.1.1	INTEGER	read-write	A unique value, greater than zero, for each node. It is recommended that values are assinged contiguously starting from 1.
INT dsDNSServerRowStatus	1.3.6.1.4.1.6296.9.1.1.2.18.10.1.4	INTEGER	read-write	.
dsDNSServerTable	1.3.6.1.4.1.6296.9.1.1.2.18.10		not-accessible	A list of dsNTPServerEntry entries.
dsDomainNameServiceInfo	1.3.6.1.4.1.6296.9.1.1.2.18
dsFanEntry	1.3.6.1.4.1.6296.9.1.1.2.7.1		not-accessible	An entry containing fan information.
INT dsFanIndex	1.3.6.1.4.1.6296.9.1.1.2.7.1.2	INTEGER	read-only	A unique value, greater than zero, for each module. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
INT dsFaninstalled	1.3.6.1.4.1.6296.9.1.1.2.7.1.4	INTEGER	read-only	dsFan install information
INT dsFanNodeIndex	1.3.6.1.4.1.6296.9.1.1.2.7.1.1	INTEGER	read-only	A unique value, greater than zero, for each module. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
INT dsFanstatus	1.3.6.1.4.1.6296.9.1.1.2.7.1.3	INTEGER	read-only	dsFan status information
dsFanTable	1.3.6.1.4.1.6296.9.1.1.2.7		not-accessible	A list of dsFanEntry entries.
STR dsFirmwareVersion	1.3.6.1.4.1.6296.9.1.1.1.20	DisplayString	read-only	The Firmware version of system
INT dsFreeMem	1.3.6.1.4.1.6296.9.1.1.1.16	INTEGER	read-only	The Free memory of sytem
MAC dsHardwareAddress	1.3.6.1.4.1.6296.9.1.1.1.21	MacAddress	read-only	The Firmware version of system
STR dsHardwareVersion	1.3.6.1.4.1.6296.9.1.1.1.17	DisplayString	read-only	The Hardware version of system.
dsNetworkTimeProtocolInfo	1.3.6.1.4.1.6296.9.1.1.2.17
IP dsNTPBindAddress	1.3.6.1.4.1.6296.9.1.1.2.17.3	InetAddress	read-write	The bind-address of Network Time Protocol..
IPt dsNTPBindAddressType	1.3.6.1.4.1.6296.9.1.1.2.17.2	InetAddressType	read-write	The bind-address Type of Network Time Protocol..
INT dsNTPMode	1.3.6.1.4.1.6296.9.1.1.2.17.1	INTEGER	read-write	The mode of Network Time Protocol..
dsNTPServerEntry	1.3.6.1.4.1.6296.9.1.1.2.17.10.1		not-accessible	An entry containing Network Time Protocol information.
INT dsNTPServerIndex	1.3.6.1.4.1.6296.9.1.1.2.17.10.1.1	INTEGER	read-write	A unique value, greater than zero, for each node. It is recommended that values are assinged contiguously starting from 1.
OCT dsNTPServerName	1.3.6.1.4.1.6296.9.1.1.2.17.10.1.2	OCTET STRING	read-write	.
INT dsNTPServerRowStatus	1.3.6.1.4.1.6296.9.1.1.2.17.10.1.3	INTEGER	read-write	.
dsNTPServerTable	1.3.6.1.4.1.6296.9.1.1.2.17.10		not-accessible	A list of dsNTPServerEntry entries.
STR dsOsVersion	1.3.6.1.4.1.6296.9.1.1.1.3	DisplayString	read-only	The version of running OS.
STR dsPortCableLength	1.3.6.1.4.1.6296.9.1.1.2.4.1.49	DisplayString	read-only	Description.
INT dsPortCRCCount	1.3.6.1.4.1.6296.9.1.1.2.4.1.44	INTEGER	read-only	The trunk ID that this port belong to.
INT dsPortCurrentHost	1.3.6.1.4.1.6296.9.1.1.2.4.1.15	INTEGER	read-only	The number hosts which is allowed to be used.
TIK dsPortCurrUpTime	1.3.6.1.4.1.6296.9.1.1.2.4.1.41	TimeTicks	read-write	Port's link-up time within the current one day interval.
STR dsPortDescription	1.3.6.1.4.1.6296.9.1.1.2.4.1.32	DisplayString	read-write	Port description string
INT dsPortDownSpeed	1.3.6.1.4.1.6296.9.1.1.2.4.1.10	INTEGER	read-only	Downstream speed of port. bits/second
INT dsPortDownUtil10m	1.3.6.1.4.1.6296.9.1.1.2.4.1.31	INTEGER	read-only	Downstream traffic utilization during last 10 minute. Unit: bps
INT dsPortDownUtil1m	1.3.6.1.4.1.6296.9.1.1.2.4.1.30	INTEGER	read-only	Downstream traffic utilization during last 1 minute. Unit: bps
INT dsPortDownUtil5s	1.3.6.1.4.1.6296.9.1.1.2.4.1.29	INTEGER	read-only	Downstream traffic utilization during last 5 seconfs. Unit: bps
INT dsPortDuplex	1.3.6.1.4.1.6296.9.1.1.2.4.1.8	INTEGER	read-write	The duplex status of port.
INT dsPortEgressrate	1.3.6.1.4.1.6296.9.1.1.2.4.1.13	INTEGER	read-write	A outgoing rate limit control value.
dsPortEntry	1.3.6.1.4.1.6296.9.1.1.2.4.1		not-accessible	An entry containing management information applicable to a particular port.
INT dsPortFlowControl	1.3.6.1.4.1.6296.9.1.1.2.4.1.11	INTEGER	read-write	The flow control mode of port.
OID dsPortIfIndex	1.3.6.1.4.1.6296.9.1.1.2.4.1.4	OBJECT IDENTIFIER	read-only	matching ifIndex oid which is defined in interface mib.
INT dsPortIngressrate	1.3.6.1.4.1.6296.9.1.1.2.4.1.12	INTEGER	read-write	A incomming rate limit control value. In case of Vdsl QAM20, it means constellation value of each port.
INT dsPortInstallStatus	1.3.6.1.4.1.6296.9.1.1.2.4.1.14	INTEGER	read-only	The install status of optional module.
INT dsPortMaxHost	1.3.6.1.4.1.6296.9.1.1.2.4.1.16	INTEGER	read-write	The maximum number hosts which can be allowed to be used. '-1' means the unlimited max-host value.
INT dsPortModuleIndex	1.3.6.1.4.1.6296.9.1.1.2.4.1.1	INTEGER	read-only	A unique value, greater than zero, for each module. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
INT dsPortNego	1.3.6.1.4.1.6296.9.1.1.2.4.1.7	INTEGER	read-write	The Nego mode of port.
INT dsPortPortIndex	1.3.6.1.4.1.6296.9.1.1.2.4.1.2	INTEGER	read-only	A unique value, greater than zero, for each port. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
TIK dsPortPrevUpTime	1.3.6.1.4.1.6296.9.1.1.2.4.1.42	TimeTicks	read-write	Port's link-up time for the previous one day .
INT dsPortPVID	1.3.6.1.4.1.6296.9.1.1.2.4.1.5	INTEGER	read-write	The PVID of port.
C32 dsPortRateLimitEgressThreshold	1.3.6.1.4.1.6296.9.1.1.2.4.1.48	Counter32	read-write	The rate-limit egress threshold value. only for V2XXX.
C32 dsPortRateLimitIngressThreshold	1.3.6.1.4.1.6296.9.1.1.2.4.1.46	Counter32	read-write	The rate-limit ingress threshold value. only for V2XXX.
C32 dsPortRateLimitUnit	1.3.6.1.4.1.6296.9.1.1.2.4.1.45	Counter32	read-write	The rate-limit unit value. only for V2XXX.
INT dsPortReset	1.3.6.1.4.1.6296.9.1.1.2.4.1.35	INTEGER	read-write	Operational Reset of port
INT dsPortShared	1.3.6.1.4.1.6296.9.1.1.2.4.1.6	INTEGER	read-only	The Shared status of port.
INT dsPortSpeed	1.3.6.1.4.1.6296.9.1.1.2.4.1.40	INTEGER	read-write	switch port speed. bits/second. these value is vaild, 10000000,100000000,1000000000.
dsPortTable	1.3.6.1.4.1.6296.9.1.1.2.4		not-accessible	A list of dsPortEntry entries.
INT dsPortTrunkID	1.3.6.1.4.1.6296.9.1.1.2.4.1.43	INTEGER	read-only	The trunk ID that this port belong to.
STR dsPortType	1.3.6.1.4.1.6296.9.1.1.2.4.1.3	DisplayString	read-only	The type of communication port. This string defines the type of port.
INT dsPortUpSpeed	1.3.6.1.4.1.6296.9.1.1.2.4.1.9	INTEGER	read-only	Upstream speed of port. bits/second
INT dsPortUpUtil10m	1.3.6.1.4.1.6296.9.1.1.2.4.1.28	INTEGER	read-only	Upstream traffic utilization during last 10 minute. Unit: bps
INT dsPortUpUtil1m	1.3.6.1.4.1.6296.9.1.1.2.4.1.27	INTEGER	read-only	Upstream traffic utilization during last 1 minute. Unit: bps
INT dsPortUpUtil5s	1.3.6.1.4.1.6296.9.1.1.2.4.1.26	INTEGER	read-only	Upstream traffic utilization during last 5 seconfs. Unit: bps
INT dsPortWanAdminStatus	1.3.6.1.4.1.6296.9.1.1.2.4.1.33	INTEGER	read-write	Administrative status of WAN port
INT dsPortWanOperStatus	1.3.6.1.4.1.6296.9.1.1.2.4.1.34	INTEGER	read-only	Operational status of WAN port
dsPowerEntry	1.3.6.1.4.1.6296.9.1.1.2.6.1		not-accessible	An entry containing dsPower information.
INT dsPowerIndex	1.3.6.1.4.1.6296.9.1.1.2.6.1.2	INTEGER	read-only	A unique value, greater than zero, for each module. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
INT dsPowerinstalled	1.3.6.1.4.1.6296.9.1.1.2.6.1.4	INTEGER	read-only	dsPower install information
INT dsPowerNodeIndex	1.3.6.1.4.1.6296.9.1.1.2.6.1.1	INTEGER	read-only	A unique value, greater than zero, for each module. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
INT dsPowerstatus	1.3.6.1.4.1.6296.9.1.1.2.6.1.3	INTEGER	read-only	dsPower status information
dsPowerTable	1.3.6.1.4.1.6296.9.1.1.2.6		not-accessible	A list of dsPowerEntry entries.
INT dsResetSystem	1.3.6.1.4.1.6296.9.1.1.1.1	INTEGER	read-write	Send system-reset to this system.
STR dsSerialNumber	1.3.6.1.4.1.6296.9.1.1.1.19	DisplayString	read-only	The Serial number of system
INT dsSoftwareCompatibility	1.3.6.1.4.1.6296.9.1.1.1.18	INTEGER	read-only	The Software Compatibility
dsSwitchAtEntry	1.3.6.1.4.1.6296.9.1.1.2.12.1		not-accessible	An entry containing management information applicable to a particular switch ARP.
INT dsSwitchAtifIndex	1.3.6.1.4.1.6296.9.1.1.2.12.1.1	INTEGER	read-only	It means that the ifIndex in MIB-II Interface of physical port..
PHY dsSwitchAtMacAddress	1.3.6.1.4.1.6296.9.1.1.2.12.1.3	PhysAddress	read-only	The physical address in ARP informations.
IP dsSwitchAtNetAddress	1.3.6.1.4.1.6296.9.1.1.2.12.1.2	IpAddress	read-only	The IP address in ARP informations.
dsSwitchAtTable	1.3.6.1.4.1.6296.9.1.1.2.12		not-accessible	A list of dsSwitchUserMacEntry entries.
INT dsSwitchAtVID	1.3.6.1.4.1.6296.9.1.1.2.12.1.4	INTEGER	read-only	The VLAN ID in ARP informations.
dsSwitchModules	1.3.6.1.4.1.6296.9.1.1.2
dsSwitchSystem	1.3.6.1.4.1.6296.9.1.1.1
dsSwitchUserMacEntry	1.3.6.1.4.1.6296.9.1.1.2.11.1		not-accessible	An entry containing management information applicable to a particular switch User mac address.
dsSwitchUserMacTable	1.3.6.1.4.1.6296.9.1.1.2.11		not-accessible	A list of dsSwitchUserMacEntry entries.
IP dsSyslogBindAddress	1.3.6.1.4.1.6296.9.1.1.2.19.2	InetAddress	read-write	.
IPt dsSyslogBindAddressType	1.3.6.1.4.1.6296.9.1.1.2.19.1	InetAddressType	read-write	.
dsSyslogConfEntry	1.3.6.1.4.1.6296.9.1.1.2.19.10.1		not-accessible	An entry containing Syslog Configuration information.
INT dsSyslogConfFacility	1.3.6.1.4.1.6296.9.1.1.2.19.10.1.2	INTEGER	read-write	.
INT dsSyslogConfIndex	1.3.6.1.4.1.6296.9.1.1.2.19.10.1.1	INTEGER	read-write	A unique value, greater than zero, for each node. It is recommended that values are assinged contiguously starting from 1.
IP dsSyslogConfRemoteAddress	1.3.6.1.4.1.6296.9.1.1.2.19.10.1.7	InetAddress	read-write	.
IPt dsSyslogConfRemoteAddrType	1.3.6.1.4.1.6296.9.1.1.2.19.10.1.6	InetAddressType	read-write	.
INT dsSyslogConfRowStatus	1.3.6.1.4.1.6296.9.1.1.2.19.10.1.8	INTEGER	read-write	.
INT dsSyslogConfSeverity	1.3.6.1.4.1.6296.9.1.1.2.19.10.1.3	INTEGER	read-write	.
INT dsSyslogConfStorage	1.3.6.1.4.1.6296.9.1.1.2.19.10.1.5	INTEGER	read-write	.
dsSyslogConfTable	1.3.6.1.4.1.6296.9.1.1.2.19.10		not-accessible	A list of dsSyslogConfEntry entries.
INT dsSyslogConfTarget	1.3.6.1.4.1.6296.9.1.1.2.19.10.1.4	INTEGER	read-write	.
dsSyslogInfo	1.3.6.1.4.1.6296.9.1.1.2.19
INT dsSyslogLocalCode	1.3.6.1.4.1.6296.9.1.1.2.19.3	INTEGER	read-write	.
dsSystemNOSEntry	1.3.6.1.4.1.6296.9.1.1.1.30.1.1		not-accessible	An entry containing management information applicable to a particular .
INT dsSystemNOSIndex	1.3.6.1.4.1.6296.9.1.1.1.30.1.1.1	INTEGER	read-only	A unique value, greater than zero, for each module. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
dsSystemNOSInfo	1.3.6.1.4.1.6296.9.1.1.1.30
OCT dsSystemNOSName	1.3.6.1.4.1.6296.9.1.1.1.30.1.1.2	OCTET STRING	read-only	.
INT dsSystemNOSSize	1.3.6.1.4.1.6296.9.1.1.1.30.1.1.4	INTEGER	read-only	.
dsSystemNOSTable	1.3.6.1.4.1.6296.9.1.1.1.30.1		not-accessible	A list of dsSystemNOSEntry entries.
OCT dsSystemNOSVersion	1.3.6.1.4.1.6296.9.1.1.1.30.1.1.3	OCTET STRING	read-only	.
dsSystemSlotEntry	1.3.6.1.4.1.6296.9.1.1.2.10.1		not-accessible	An entry containing management information applicable to a particular switch Slot.
INT dsSystemSlotIndex	1.3.6.1.4.1.6296.9.1.1.2.10.1.2	INTEGER	read-only	A unique value, greater than zero, for each slot. It is recommended that values are assigned contiguously starting from 1.
INT dsSystemSlotInstallStatus	1.3.6.1.4.1.6296.9.1.1.2.10.1.4	INTEGER	read-only	The current install status of each slot.
INT dsSystemSlotModuleIndex	1.3.6.1.4.1.6296.9.1.1.2.10.1.1	INTEGER	read-only	A unique value, greater than zero, for each module(Node). It is recommended that values are assigned contiguously starting from 1.
INT dsSystemSlotPortNum	1.3.6.1.4.1.6296.9.1.1.2.10.1.6	INTEGER	read-only	The number of port on the slot.
INT dsSystemSlotStatus	1.3.6.1.4.1.6296.9.1.1.2.10.1.5	INTEGER	read-only	The current slot status
dsSystemSlotTable	1.3.6.1.4.1.6296.9.1.1.2.10		not-accessible	A list of slotEntry entries.
STR dsSystemSlotType	1.3.6.1.4.1.6296.9.1.1.2.10.1.3	DisplayString	read-only	The type of each slot. This string defines the type of slot ex) TX-10/100, FX-100, GBIC, SWU, ADSL2+, ADSL, SHDSL, Vdsl, Ethernet
IP dsSystemUpgradeAddress	1.3.6.1.4.1.6296.9.1.1.1.30.2.3	InetAddress	read-write	The server address.
IPt dsSystemUpgradeAddressType	1.3.6.1.4.1.6296.9.1.1.1.30.2.2	InetAddressType	read-write	Determine whether using IPv4 or IPv6, etc.
NTF dsSystemUpgraded	1.3.6.1.4.1.6296.9.1.1.1.30.2.15.1			.
dsSystemUpgradeInfo	1.3.6.1.4.1.6296.9.1.1.1.30.2
INT dsSystemUpgradeMethod	1.3.6.1.4.1.6296.9.1.1.1.30.2.1	INTEGER	read-write	FTP or TFTP.
dsSystemUpgradeNotification	1.3.6.1.4.1.6296.9.1.1.1.30.2.15
OCT dsSystemUpgradePasswd	1.3.6.1.4.1.6296.9.1.1.1.30.2.5	OCTET STRING	read-write	The password. In case of ftp, need password.
OCT dsSystemUpgradePath	1.3.6.1.4.1.6296.9.1.1.1.30.2.6	OCTET STRING	read-write	Indicate where NOS exist.
INT dsSystemUpgradeStatus	1.3.6.1.4.1.6296.9.1.1.1.30.2.9	INTEGER	read-write	.
INT dsSystemUpgradeStorage	1.3.6.1.4.1.6296.9.1.1.1.30.2.7	INTEGER	read-write	The type of NOS.
OCT dsSystemUpgradeUser	1.3.6.1.4.1.6296.9.1.1.1.30.2.4	OCTET STRING	read-write	The user name.
INT dsSystemUpgradeValue	1.3.6.1.4.1.6296.9.1.1.1.30.2.8	INTEGER	read-write	Additional information. ex) the slot-number of xDSL,... .
dsTcEntry	1.3.6.1.4.1.6296.9.1.1.2.20.1		not-accessible	An entry containing dsTc information.
INT dsTcGuaranteedBandwidth	1.3.6.1.4.1.6296.9.1.1.2.20.1.3	INTEGER	read-write	It means reserved bandwidth of route applied to processing protocol. Bandwidth can be from 1 to 16Gbps.
INT dsTcIndex	1.3.6.1.4.1.6296.9.1.1.2.20.1.2	INTEGER	read-only	A unique value, greater than zero, for each dsTc. It is recommended that values are assinged contiguously starting from 1.
INT dsTcMaxBandwidth	1.3.6.1.4.1.6296.9.1.1.2.20.1.4	INTEGER	read-write	It means maximum bandwidth of route applied to processing protocol. Bandwidth can be from 1 to 16Gbps.
INT dsTcNodeIndex	1.3.6.1.4.1.6296.9.1.1.2.20.1.1	INTEGER	read-only	A unique value, greater than zero, for each node. It is recommended that values are assinged contiguously starting from 1.
INT dsTcReset	1.3.6.1.4.1.6296.9.1.1.2.20.1.6	INTEGER	read-write	Reset configuration about route applied to processing protocol
C64 dsTcStatsCount	1.3.6.1.4.1.6296.9.1.1.2.20.1.7	Counter64	read-only	The total bits number of packets matching with a tc configuration, the counter value is a cumulative sum
INT dsTcStatsCount10Min	1.3.6.1.4.1.6296.9.1.1.2.20.1.10	INTEGER	read-only	The average bps of packets matching with dsTc configuration during 10 minutes.
INT dsTcStatsCount1Min	1.3.6.1.4.1.6296.9.1.1.2.20.1.9	INTEGER	read-only	The average bps of packets matching with dsTc configuration during 1 minutes.
INT dsTcStatsCount5Sec	1.3.6.1.4.1.6296.9.1.1.2.20.1.8	INTEGER	read-only	The average bps of packets matching with dsTc configuration during 5 sec.
INT dsTcStatsCountReset	1.3.6.1.4.1.6296.9.1.1.2.20.1.11	INTEGER	read-write	Reset Tc Statistics Counter Registers including tcStatsCount, tcStatsCount5Sec, tcStatsCount1Min and tcStatsCount10Min
dsTcTable	1.3.6.1.4.1.6296.9.1.1.2.20		not-accessible	A list of dsTcEntrry entries.
INT dsTcWeight	1.3.6.1.4.1.6296.9.1.1.2.20.1.5	INTEGER	read-write	It means weight limit of route applied to processing protocol. Weight limit can be from 1 to 1024.
dsTemperatureEntry	1.3.6.1.4.1.6296.9.1.1.2.5.1		not-accessible	An entry containing temperature information.
INT dsTemperatureIndex	1.3.6.1.4.1.6296.9.1.1.2.5.1.2	INTEGER	read-only	A unique value, greater than zero, for each module. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
INT dsTemperatureNodeIndex	1.3.6.1.4.1.6296.9.1.1.2.5.1.1	INTEGER	read-only	A unique value, greater than zero, for each module. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
INT dsTemperatureStatus	1.3.6.1.4.1.6296.9.1.1.2.5.1.3	INTEGER	read-only	dsTemperature status information
dsTemperatureTable	1.3.6.1.4.1.6296.9.1.1.2.5		not-accessible	A list of dsTemperatureEntry entries.
STR dsTftpFile	1.3.6.1.4.1.6296.9.1.1.1.5	DisplayString	read-write	The Remote file name
INT dsTftpFileType	1.3.6.1.4.1.6296.9.1.1.1.7	INTEGER	read-write	TFTP file type. The value of cpe-nos(2) is only available, in case of dsVdsl.
STR dsTftpServer	1.3.6.1.4.1.6296.9.1.1.1.4	DisplayString	read-write	The IP address or hostname of TFTP server.
INT dsTftpStatus	1.3.6.1.4.1.6296.9.1.1.1.6	INTEGER	read-write	TFTP transaction status. To receive a file from remote server, get is used. To send OS or Configuration to remote server, put is used. Abort can be used to terminate running tftp client.
OCT dsTimeZone	1.3.6.1.4.1.6296.9.1.1.1.22	OCTET STRING	read-write	The Time zone.
INT dsTotalMem	1.3.6.1.4.1.6296.9.1.1.1.14	INTEGER	read-only	The Total memory of system
INT dsUsedMem	1.3.6.1.4.1.6296.9.1.1.1.15	INTEGER	read-only	The Used memory of system
PHY dsUserMacAddress1	1.3.6.1.4.1.6296.9.1.1.2.11.1.3	PhysAddress	read-only	The first entry of lastest user mac address.
PHY dsUserMacAddress2	1.3.6.1.4.1.6296.9.1.1.2.11.1.4	PhysAddress	read-only	The second entry of lastest user mac address.
PHY dsUserMacAddress3	1.3.6.1.4.1.6296.9.1.1.2.11.1.5	PhysAddress	read-only	The third entry of lastest user mac address.
PHY dsUserMacAddress4	1.3.6.1.4.1.6296.9.1.1.2.11.1.6	PhysAddress	read-only	The fourth entry of lastest user mac address.
PHY dsUserMacAddress5	1.3.6.1.4.1.6296.9.1.1.2.11.1.7	PhysAddress	read-only	The fifth entry of lastest user mac address.
PHY dsUserMacAddress6	1.3.6.1.4.1.6296.9.1.1.2.11.1.8	PhysAddress	read-only	The sixth entry of lastest user mac address.
PHY dsUserMacAddress7	1.3.6.1.4.1.6296.9.1.1.2.11.1.9	PhysAddress	read-only	The seventh entry of lastest user mac address.
PHY dsUserMacAddress8	1.3.6.1.4.1.6296.9.1.1.2.11.1.10	PhysAddress	read-only	The eighth entry of lastest user mac address.
INT dsUserMacModuleIndex	1.3.6.1.4.1.6296.9.1.1.2.11.1.1	INTEGER	read-only	A unique value, greater than zero, for each module(Node). It is recommended that values are assigned contiguously starting from 1.
INT dsUserMacPortIndex	1.3.6.1.4.1.6296.9.1.1.2.11.1.2	INTEGER	read-only	A unique value, greater than zero, for each port. It is recommended that values are assigned contiguously starting from 1.
INT dsVdslCoCountEnetCrcErrCnt	1.3.6.1.4.1.6296.9.1.1.2.27.1.6	INTEGER	read-only	.
dsVdslCoCountEntry	1.3.6.1.4.1.6296.9.1.1.2.27.1		not-accessible	.
INT dsVdslCoCountRxCrcErr	1.3.6.1.4.1.6296.9.1.1.2.27.1.2	INTEGER	read-only	.
INT dsVdslCoCountRxDrop	1.3.6.1.4.1.6296.9.1.1.2.27.1.3	INTEGER	read-only	.
INT dsVdslCoCountRxFrame	1.3.6.1.4.1.6296.9.1.1.2.27.1.1	INTEGER	read-only	.
dsVdslCoCountTable	1.3.6.1.4.1.6296.9.1.1.2.27		not-accessible	.
INT dsVdslCoCountTxDrop	1.3.6.1.4.1.6296.9.1.1.2.27.1.5	INTEGER	read-only	.
INT dsVdslCoCountTxFrame	1.3.6.1.4.1.6296.9.1.1.2.27.1.4	INTEGER	read-only	.
INT dsVdslCpeCountDropFrameCnt	1.3.6.1.4.1.6296.9.1.1.2.26.1.13	INTEGER	read-only	.
dsVdslCpeCountEntry	1.3.6.1.4.1.6296.9.1.1.2.26.1		not-accessible	.
INT dsVdslCpeCountFeCRCB0	1.3.6.1.4.1.6296.9.1.1.2.26.1.3	INTEGER	read-only	.
INT dsVdslCpeCountFeCRCB1	1.3.6.1.4.1.6296.9.1.1.2.26.1.4	INTEGER	read-only	.
INT dsVdslCpeCountFeFECB0	1.3.6.1.4.1.6296.9.1.1.2.26.1.1	INTEGER	read-only	.
INT dsVdslCpeCountFeFECB1	1.3.6.1.4.1.6296.9.1.1.2.26.1.2	INTEGER	read-only	.
INT dsVdslCpeCountFeFECUnCrrB0	1.3.6.1.4.1.6296.9.1.1.2.26.1.7	INTEGER	read-only	.
INT dsVdslCpeCountFeFECUnCrrB1	1.3.6.1.4.1.6296.9.1.1.2.26.1.8	INTEGER	read-only	.
INT dsVdslCpeCountFeFLOS	1.3.6.1.4.1.6296.9.1.1.2.26.1.5	INTEGER	read-only	.
INT dsVdslCpeCountFeSEF	1.3.6.1.4.1.6296.9.1.1.2.26.1.6	INTEGER	read-only	.
INT dsVdslCpeCountRxCrcCnt	1.3.6.1.4.1.6296.9.1.1.2.26.1.12	INTEGER	read-only	.
INT dsVdslCpeCountRxFrameCnt	1.3.6.1.4.1.6296.9.1.1.2.26.1.10	INTEGER	read-only	.
dsVdslCpeCountTable	1.3.6.1.4.1.6296.9.1.1.2.26		not-accessible	.
INT dsVdslCpeCountTxCrcCnt	1.3.6.1.4.1.6296.9.1.1.2.26.1.11	INTEGER	read-only	.
INT dsVdslCpeCountTxFrameCnt	1.3.6.1.4.1.6296.9.1.1.2.26.1.9	INTEGER	read-only	.
INT dsVdslCpeDuplex	1.3.6.1.4.1.6296.9.1.1.2.8.1.140	INTEGER	read-write	The Duplex state of CPE Ethernet port.
dsVdslCpeInfoEntry	1.3.6.1.4.1.6296.9.1.1.2.28.1		not-accessible	Each entry consists of a list of parameters that represents the information of a CPE.
dsVdslCpeInfoTable	1.3.6.1.4.1.6296.9.1.1.2.28		not-accessible	This table contains information of the CPEs.
STR dsVdslCpeModelName	1.3.6.1.4.1.6296.9.1.1.2.28.1.4	DisplayString	read-only	CPE model name
INT dsVdslCpeNegoState	1.3.6.1.4.1.6296.9.1.1.2.8.1.139	INTEGER	read-write	The Nego mode of CPE Ethernet port.
STR dsVdslCpeSerialNumber	1.3.6.1.4.1.6296.9.1.1.2.28.1.5	DisplayString	read-only	CPE serial number
INT dsVdslCpeSpeed	1.3.6.1.4.1.6296.9.1.1.2.8.1.141	INTEGER	read-write	The Speed of CPE Ethernet port.
STR dsVdslCpeVendorId	1.3.6.1.4.1.6296.9.1.1.2.28.1.2	DisplayString	read-only	CPE vendor ID
STR dsVdslCpeVendorName	1.3.6.1.4.1.6296.9.1.1.2.28.1.3	DisplayString	read-only	CPE vendor name
STR dsVdslCpeVersion	1.3.6.1.4.1.6296.9.1.1.2.28.1.1	DisplayString	read-only	CPE NOS version
INT dsVdslLineConfChannel	1.3.6.1.4.1.6296.9.1.1.2.25.1.27	INTEGER	read-write	.
INT dsVdslLineConfDownINP	1.3.6.1.4.1.6296.9.1.1.2.25.1.21	INTEGER	read-write	Vdsl downstream INP .
U32 dsVdslLineConfDownMaxDataRate	1.3.6.1.4.1.6296.9.1.1.2.25.1.10	Unsigned32	read-create	Specifies the maximum downstream slow channel data rate in steps of 1000 bits/second. The maximum aggregate downstream transmit speed of the line can be derived from the sum of maximum downstream fast and slow channel data rates.
INT dsVdslLineConfDownMaxInterDelay	1.3.6.1.4.1.6296.9.1.1.2.25.1.16	INTEGER	read-create	Specifies the maximum interleave delay for the downstream slow channel.
U32 dsVdslLineConfDownMaxSnrMgn	1.3.6.1.4.1.6296.9.1.1.2.25.1.4	Unsigned32	read-create	Specifies the maximum downstream Signal/Noise Margin in units of 0.25 dB, for a range of 0 to 31.75 dB.
U32 dsVdslLineConfDownMinDataRate	1.3.6.1.4.1.6296.9.1.1.2.25.1.11	Unsigned32	read-create	Specifies the minimum downstream slow channel data rate in steps of 1000 bits/second. The minimum aggregate downstream transmit speed of the line can be derived from the sum of minimum downstream fast and slow channel data rates.
U32 dsVdslLineConfDownMinSnrMgn	1.3.6.1.4.1.6296.9.1.1.2.25.1.5	Unsigned32	read-create	Specifies the minimum downstream Signal/Noise Margin in units of 0.25 dB, for a range of 0 to 31.75 dB.
U32 dsVdslLineConfDownTargetSnrMgn	1.3.6.1.4.1.6296.9.1.1.2.25.1.6	Unsigned32	read-create	Specifies the target downstream Signal/Noise Margin in units of 0.25 dB, for a range of 0 to 31.75 dB. This is the Noise Margin the transceivers must achieve with a BER of 10^-7 or better to successfully complete initialization.
C64 dsVdslLineConfHamband	1.3.6.1.4.1.6296.9.1.1.2.25.1.20	Counter64	read-write	dsVdsl Amature Radio(HAM) band ID. The value of Ham band is combination of the following value. If you want to set band1 and band10, you should set value 257(band1 + band10) to the Ham band. band1 [ 1.800 - 1.810 ] MHz : RFI Notch (1) band2 [ 1.800 - 1.825 ] MHz : KOREA HAM-BAND (2) band3 [ 1.810 - 1.825 ] MHz : ANNEX F (4) band4 [ 1.810 - 2.000 ] MHz : ETSI, T1E1 (8) band5 [ 1.9075 - 1.9125 ] MHz : ANNEX F (16) band6 [ 2.173 - 2.191 ] MHz : DT GMDSS (2097152) 0x0000 0020 0000 band7 [ 3.500 - 3.550 ] MHz : KOREA HAM-BAND (32) band8 [ 3.500 - 3.575 ] MHz : ANNEX F (64) band9 [ 3.500 - 3.800 ] MHz : ETSI (128) band10 [ 3.500 - 4.000 ] MHz : T1E1 (256) band11 [ 3.747 - 3.754 ] MHz : ANNEX F (512) band12 [ 3.790 - 3.800 ] MHz : KOREA HAM-BAND (1024) band13 [ 3.791 - 3.805 ] MHz : ANNEX F (2048) band14 [ 4.200 - 4.215 ] MHz : DT GMDSS (4194304) 0x0000 0040 0000 band15 [ 5.900 - 6.200 ] MHz : DT DRM radio (Broadcasting) (8388608) 0x0000 0080 0000 band16 [ 6.300 - 6.320 ] MHz : DT GMDSS (16777216) 0x0000 0100 0000 band17 [ 7.000 - 7.100 ] MHz : KOREA HAM-BAND, ANNEX F, ETSI (4096) band18 [ 7.000 - 7.300 ] MHz : T1E1 (8192) band19 [ 7.100 - 7.350 ] MHz : DT DRM radio (Broadcasting) (33554432) 0x0000 0200 0000 band20 [ 8.405 - 8.420 ] MHz : DT GMDSS (67108864) 0x0000 0400 0000 band21 [ 9.400 - 9.900 ] MHz : DT DRM radio (Broadcasting) (134217728) 0x0000 0800 0000 band22 [ 10.100 - 10.150 ] MHz : KOREA HAM-BAND, ANNEX F, ETSI, T1E1 (16384) band23 [ 11.600 - 12.100 ] MHz : DT DRM radio (Broadcasting) (268435456) 0x0000 1000 0000 band24 [ 12.570 - 12.585 ] MHz : DT GMDSS (536870912) 0x0000 2000 0000 band25 [ 13.570 - 13.870 ] MHz : DT DRM radio (Broadcasting) (1073741824) 0x0000 4000 0000 band26 [ 14.000 - 14.350 ] MHz : ANNEX F, ETSI, T1E1 (32768) band27 [ 15.100 - 15.800 ] MHz : DT DRM radio (Broadcasting) (2147483648) 0x0000 8000 0000 band28 [ 16.795 - 16.810 ] MHz : DT GMDSS (4294967296) 0x0001 0000 0000 band29 [ 17.480 - 17.900 ] MHz : DT DRM radio (Broadcasting) (8589934592) 0x0002 0000 0000 band30 [ 18.068 - 18.168 ] MHz : ANNEX F, ETSI, T1E1 (65536) band31 [ 21.000 - 21.450 ] MHz : ANNEX F, ETSI, T1E1 (131072) 0x0000 0002 0000 band32 [ 24.890 - 24.990 ] MHz : ANNEX F, ETST, T1E1 (262144) 0x0000 0004 0000 band33 [ 28.000 - 29.100 ] MHz : ETSI (524288) 0x0000 0008 0000 band34 [ 28.000 - 29.700 ] MHz : ANNEX F, ETSI, T1E1 (1048576) 0x0000 0010 0000
INT dsVdslLineConfPBOLength	1.3.6.1.4.1.6296.9.1.1.2.25.1.23	INTEGER	read-only	dsVdsl Power Back-Off Length. 100m(1) 200m(2) 300m(3) 400m(4) 500m(5) 600m(6) 700m(7) 800m(8) 900m(9) 1000m(10)
dsVdslLineConfProfileEntry	1.3.6.1.4.1.6296.9.1.1.2.25.1		not-accessible	Each entry consists of a list of parameters that represents the configuration of a VDSL line. A default profile with an index of 'DEFVAL', will always exist and its parameters will be set to vendor specific values, unless otherwise specified in this document.
STR dsVdslLineConfProfileName	1.3.6.1.4.1.6296.9.1.1.2.25.1.1	DisplayString	not-accessible	This object identifies a row in this table. A default profile with an index of 'DEFVAL', will always exist and its parameters will be set to vendor specific values, unless otherwise specified in this document.
dsVdslLineConfProfileTable	1.3.6.1.4.1.6296.9.1.1.2.25		not-accessible	This table contains information on the VDSL line configuration. One entry in this table reflects a profile defined by a manager which can be used to configure the VDSL line. Entries in this table MUST be maintained in a persistent manner.
ROW dsVdslLineConfProfRowStatus	1.3.6.1.4.1.6296.9.1.1.2.25.1.28	RowStatus	read-create	This object is used to create a new row or modify or delete an existing row in this table. A profile activated by setting this object to 'active'. When 'active' is set, the system will validate the profile. Before a profile can be deleted or taken out of service, (by setting this object to 'destroy' or 'outOfService') it must be first unreferenced from all associated lines.
INT dsVdslLineConfPSDMaskLevel	1.3.6.1.4.1.6296.9.1.1.2.25.1.24	INTEGER	read-only	dsVdsl PSD Mask Level. notavailable(-1) old gains(0) ANSI M1(1) ANSI M2(2) ETSI M1(3) ETSI M2(4) ANNEX F 8.5(5) ANSI M1 EX(6) ANSI M2 EX(7) ETSI M1 EX(8) ETSI M2 EX(9) ANNEX F 11.5(10) PSD-K(11)
INT dsVdslLineConfTCMAdmin	1.3.6.1.4.1.6296.9.1.1.2.25.1.25	INTEGER	read-write	.
INT dsVdslLineConfUpboEnable	1.3.6.1.4.1.6296.9.1.1.2.25.1.26	INTEGER	read-write	.
INT dsVdslLineConfUpINP	1.3.6.1.4.1.6296.9.1.1.2.25.1.22	INTEGER	read-write	Vdsl upstream INP.
U32 dsVdslLineConfUpMaxDataRate	1.3.6.1.4.1.6296.9.1.1.2.25.1.12	Unsigned32	read-create	Specifies the maximum upstream slow channel data rate in steps of 1000 bits/second.
INT dsVdslLineConfUpMaxInterDelay	1.3.6.1.4.1.6296.9.1.1.2.25.1.17	INTEGER	read-create	Specifies the maximum interleave delay for the upstream slow channel.
U32 dsVdslLineConfUpMaxSnrMgn	1.3.6.1.4.1.6296.9.1.1.2.25.1.7	Unsigned32	read-create	Specifies the maximum upstream Signal/Noise Margin in units of 0.25 dB, for a range of 0 to 31.75 dB.
U32 dsVdslLineConfUpMinDataRate	1.3.6.1.4.1.6296.9.1.1.2.25.1.13	Unsigned32	read-create	Specifies the minimum upstream slow channel data rate in steps of 1000 bits/second.
U32 dsVdslLineConfUpMinSnrMgn	1.3.6.1.4.1.6296.9.1.1.2.25.1.8	Unsigned32	read-create	Specifies the minimum upstream Signal/Noise Margin in units of 0.25 dB, for a range of 0 to 31.75 dB.
U32 dsVdslLineConfUpTargetSnrMgn	1.3.6.1.4.1.6296.9.1.1.2.25.1.9	Unsigned32	read-create	Specifies the target upstream Signal/Noise Margin in units of 0.25 dB, for a range of 0 to 31.75 dB. This is the Noise Margin the transceivers must achieve with a BER of 10^-7 or better to successfully complete initialization.
INT dsVdslModuleIndex	1.3.6.1.4.1.6296.9.1.1.2.8.1.1	INTEGER	read-only	A unique value, greater than zero, for each module. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
INT dsVdslPort15mElapsedTime	1.3.6.1.4.1.6296.9.1.1.2.8.1.18	INTEGER	read-only	The current elapsed time from reinitializing point per 15 minutes.
INT dsVdslPort15mElapsedTimeSeconds	1.3.6.1.4.1.6296.9.1.1.2.8.1.74	INTEGER	read-only	The current elapsed time from reinitializing point per 15 minutes in seconds.
INT dsVdslPort1dayElapsedTime	1.3.6.1.4.1.6296.9.1.1.2.8.1.19	INTEGER	read-only	The current elapsed time from reinitializing point per 1 day.
INT dsVdslPort1dayElapsedTimeSeconds	1.3.6.1.4.1.6296.9.1.1.2.8.1.75	INTEGER	read-only	The current elapsed time from reinitializing point per 1 day in seconds.
INT dsVdslPortAlarmConfProfileClear	1.3.6.1.4.1.6296.9.1.1.2.8.1.84	INTEGER	read-write	To remove the alarm configure profile assigned to a physical port for a particular feature. This value should have 1 that means clear
INT dsVdslPortChannel	1.3.6.1.4.1.6296.9.1.1.2.8.1.127	INTEGER	read-write	.
INT dsVdslPortCPEDownload	1.3.6.1.4.1.6296.9.1.1.2.8.1.80	INTEGER	read-write	Download the CPE NOS. no(0) : No CPE NOS download. yes(1) : Now downloading. done(2) : Download completed. fail(3) : Download fail.
INT dsVdslPortCpeErrorCRC	1.3.6.1.4.1.6296.9.1.1.2.8.1.108	INTEGER	read-only	.
INT dsVdslPortCpePerfCountClear	1.3.6.1.4.1.6296.9.1.1.2.8.1.114	INTEGER	read-write	.
INT dsVdslPortCpePerfLOF	1.3.6.1.4.1.6296.9.1.1.2.8.1.110	INTEGER	read-only	.
INT dsVdslPortCpePerfLol	1.3.6.1.4.1.6296.9.1.1.2.8.1.113	INTEGER	read-only	.
INT dsVdslPortCpePerfLos	1.3.6.1.4.1.6296.9.1.1.2.8.1.111	INTEGER	read-only	.
STR dsVdslPortCPEVersion	1.3.6.1.4.1.6296.9.1.1.2.8.1.79	DisplayString	read-only	dsVdslPort CPE NOS informations. The format of value is 'OS1/OS2/ActiveOS'.
INT dsVdslPortDownAttenuation	1.3.6.1.4.1.6296.9.1.1.2.8.1.53	INTEGER	read-only	dsVdsl downstream port attenuation(CPE Attenuation).
G32 dsVdslPortDownCurrAttainableRate	1.3.6.1.4.1.6296.9.1.1.2.8.1.149	Gauge32	read-only	Indicates the maximum currently down attainable data rate in steps of 1000 bits/second by the Vtu. This value will be equal to or greater than vdslPhysCurrLineRate. Note that for SCM, the minimum and maximum data rates are equal. Note: 1 kbps = 1000 bps.
INT dsVdslPortDownINP	1.3.6.1.4.1.6296.9.1.1.2.8.1.132	INTEGER	read-write	dsVdsl downstream INP .
INT dsVdslPortDownInterleave	1.3.6.1.4.1.6296.9.1.1.2.8.1.69	INTEGER	read-write	dsVdslPort Downstream Interleave delay.
INT dsVdslPortDownPhysicalSpeed	1.3.6.1.4.1.6296.9.1.1.2.8.1.8	INTEGER	read-only	Downstream attainable speed of port. bits/second.
INT dsVdslPortDownProfile	1.3.6.1.4.1.6296.9.1.1.2.8.1.6	INTEGER	read-write	dsVdsl Downstream profile ID. sym11 (2) Symmetric 11/11 asym11 (1) Asymmetric 3/11 a-sym11 (0) ADSL friendly symmetric 11/11 a-asym11 (3) ADSL friendly asymmetric 3/11 a-sym13 (4) ADSL friendly symmetric 13/13 a-asym13 (6) ADSL friendly asymmetric 3/13 sym16 (5) Symmetric 16/16 tl13 (7) T-LAN friendly 13/13 tl16 (8) T-LAN friendly 16/16 tl16a (9) T-LAN friendly 13/16A (QAM20 ONLY) asym24 (11) PLAN998 Asymmetric 8/24 (QAM20 ONLY) asym18 (12) PLAN998 Asymmetric 8/18 (QAM20 ONLY) asym25 (13) PLAN998 Asymmetric Enhanced 8/25(QAM20 ONLY) asym26 (14) PLAN998 Asymmetric Enhanced 8/26(QAM20 ONLY) asym50-998n (51) PLAN998 Asymmetric asym50-998e (52) PLAN998E Asymmetric sym25-997 (53) PLAN997 Asymmetric asym50-998a (54) ADSL friendly PLAN 998 Asymetric asym50-998i (55) ISDN friendly PLAN 998 Asymetric asym50-998t (56) TLAN friendly PLAN 998 Asymetric asym50-998s (57) ADSL soft mode Asymetric asym50-998n-4b(58) PLAN998 Asymmetric 13/50 4 band asym50-998i-4b(59) ISDN friendly PLAN 998 13/50 4 band asym50-998a-4b(60) ADSL friendly PLAN 998 13/50 4 band sym25-997a(61) ADSL friendly PLAN 997 Symmetric 25/25 sym25-997i(62) ISDN friendly PLAN 997 symmetric 25/25 asym70-998n(63) PLAN998 Asymmetric 30/70 5 band asym70-998i(64) ISDN friendly PLAN 998 asymmetric 30/70 5 band asym70-998a(65) ADSL friendly PLAN 998 asymmetric 30/70 5 band asym100-998n(66) PLAN 998n Asymmetric for 6Band DMT 100M asym100-998i(67) PLAN 998i Asymmetric for 6Band DMT 100M asym100-998a(68) PLAN 998a Asymmetric for 6Band DMT 100M sym100-100-998n(69) PLAN 998n Symmetric for 6Band DMT 100/100M sym100-100-998i(70) PLAN 998i Symmetric for 6Band DMT 100/100M sym100-100-998a(71) PLAN 998a Symmetric for 6Band DMT 100/100M
INT dsVdslPortDownServiceProfile	1.3.6.1.4.1.6296.9.1.1.2.8.1.77	INTEGER	read-only	dsVdslPort downstream service profile.
INT dsVdslPortDownSNR	1.3.6.1.4.1.6296.9.1.1.2.8.1.49	INTEGER	read-only	dsVdsl downstream SNR * 1000.
INT dsVdslPortDownSNRMargin	1.3.6.1.4.1.6296.9.1.1.2.8.1.51	INTEGER	read-only	dsVdsl downstream SNR Margin(CPE SNR Margin).
INT dsVdslPortDownSNRMinMargin	1.3.6.1.4.1.6296.9.1.1.2.8.1.130	INTEGER	read-write	dsVdsl downstream Min SNR Margin(CPE Min SNR Margin).
INT dsVdslPortDownSpeed	1.3.6.1.4.1.6296.9.1.1.2.8.1.10	INTEGER	read-only	Downstream speed of port. bits/second.
dsVdslPortEntry	1.3.6.1.4.1.6296.9.1.1.2.8.1		not-accessible	An entry containing management information applicable to a particular dsVdsl port.
INT dsVdslPortErrorCountClear	1.3.6.1.4.1.6296.9.1.1.2.8.1.106	INTEGER	read-write	To initialize all error-count-value.
INT dsVdslPortErrorCRC	1.3.6.1.4.1.6296.9.1.1.2.8.1.12	INTEGER	read-only	The raw accumulating dsVdsl CRC Error count.
INT dsVdslPortErrorCRCClear	1.3.6.1.4.1.6296.9.1.1.2.8.1.91	INTEGER	read-write	To initialize .
INT dsVdslPortErrorCRCCurr15m	1.3.6.1.4.1.6296.9.1.1.2.8.1.23	INTEGER	read-only	The accumulating CRC-error count of current 15 minute.
INT dsVdslPortErrorCRCCurr1day	1.3.6.1.4.1.6296.9.1.1.2.8.1.37	INTEGER	read-only	The accumulating CRC-error count of current 1 day.
INT dsVdslPortErrorCRCPrev15m	1.3.6.1.4.1.6296.9.1.1.2.8.1.22	INTEGER	read-only	The accumulating CRC-error count of previous 15 minute.
INT dsVdslPortErrorCRCPrev1day	1.3.6.1.4.1.6296.9.1.1.2.8.1.36	INTEGER	read-only	The accumulating CRC-error count of previous 1 day.
INT dsVdslPortErrorLOF	1.3.6.1.4.1.6296.9.1.1.2.8.1.14	INTEGER	read-only	The raw accumulating dsVdsl loss of frame.
INT dsVdslPortErrorLOFClear	1.3.6.1.4.1.6296.9.1.1.2.8.1.93	INTEGER	read-write	To initialize Count of the number of LOF .
INT dsVdslPortErrorLOFCurr15m	1.3.6.1.4.1.6296.9.1.1.2.8.1.27	INTEGER	read-only	The accumulating loss-of-frame count of current 15 minute.
INT dsVdslPortErrorLOFCurr1day	1.3.6.1.4.1.6296.9.1.1.2.8.1.41	INTEGER	read-only	The accumulating loss-of-frame count of current 1 day.
INT dsVdslPortErrorLOFPrev15m	1.3.6.1.4.1.6296.9.1.1.2.8.1.26	INTEGER	read-only	The accumulating loss-of-frame count of previous 15 minute.
INT dsVdslPortErrorLOFPrev1day	1.3.6.1.4.1.6296.9.1.1.2.8.1.40	INTEGER	read-only	The accumulating loss-of-frame count of previous 1 day.
INT dsVdslPortErrorLOL	1.3.6.1.4.1.6296.9.1.1.2.8.1.17	INTEGER	read-only	The raw accumulating dsVdsl loss of link.
INT dsVdslPortErrorLOLClear	1.3.6.1.4.1.6296.9.1.1.2.8.1.96	INTEGER	read-write	To initialize Count of the number of LOL .
INT dsVdslPortErrorLOLCurr15m	1.3.6.1.4.1.6296.9.1.1.2.8.1.33	INTEGER	read-only	The accumulating loss-of-link count of current 15 minute.
INT dsVdslPortErrorLOLCurr1day	1.3.6.1.4.1.6296.9.1.1.2.8.1.47	INTEGER	read-only	The accumulating loss-of-link count of current 1 day
INT dsVdslPortErrorLOLPrev15m	1.3.6.1.4.1.6296.9.1.1.2.8.1.32	INTEGER	read-only	The accumulating loss-of-link count of previous 15 minute.
INT dsVdslPortErrorLOLPrev1day	1.3.6.1.4.1.6296.9.1.1.2.8.1.46	INTEGER	read-only	The accumulating loss-of-link count of previous 1 day.
INT dsVdslPortErrorLOS	1.3.6.1.4.1.6296.9.1.1.2.8.1.15	INTEGER	read-only	The raw accumulating dsVdsl loss of signal.
INT dsVdslPortErrorLOSClear	1.3.6.1.4.1.6296.9.1.1.2.8.1.94	INTEGER	read-write	To initialize Count of the number of LOS .
INT dsVdslPortErrorLOSCurr15m	1.3.6.1.4.1.6296.9.1.1.2.8.1.29	INTEGER	read-only	The accumulating loss-of-signal count of current 15 minute.
INT dsVdslPortErrorLOSCurr1day	1.3.6.1.4.1.6296.9.1.1.2.8.1.43	INTEGER	read-only	The accumulating loss-of-signal count of current 1 day.
INT dsVdslPortErrorLOSPrev15m	1.3.6.1.4.1.6296.9.1.1.2.8.1.28	INTEGER	read-only	The accumulating loss-of-signal count of previous 15 minute.
INT dsVdslPortErrorLOSPrev1day	1.3.6.1.4.1.6296.9.1.1.2.8.1.42	INTEGER	read-only	The accumulating loss-of-signal count of previous 1 day.
INT dsVdslPortErrorLPR	1.3.6.1.4.1.6296.9.1.1.2.8.1.16	INTEGER	read-only	The raw accumulating dsVdsl loss of power.
INT dsVdslPortErrorLPRClear	1.3.6.1.4.1.6296.9.1.1.2.8.1.95	INTEGER	read-write	To initialize Count of the number of LPR .
INT dsVdslPortErrorLPRCurr15m	1.3.6.1.4.1.6296.9.1.1.2.8.1.31	INTEGER	read-only	The accumulating loss-of-power count of current 15 minute.
INT dsVdslPortErrorLPRCurr1day	1.3.6.1.4.1.6296.9.1.1.2.8.1.45	INTEGER	read-only	The accumulating loss-of-power count of current 1 day.
INT dsVdslPortErrorLPRPrev15m	1.3.6.1.4.1.6296.9.1.1.2.8.1.30	INTEGER	read-only	The accumulating loss-of-power count of previous 15 minute.
INT dsVdslPortErrorLPRPrev1day	1.3.6.1.4.1.6296.9.1.1.2.8.1.44	INTEGER	read-only	The accumulating loss-of-power count of previous 1 day.
INT dsVdslPortErrorSecond	1.3.6.1.4.1.6296.9.1.1.2.8.1.13	INTEGER	read-only	The raw accumulating dsVdsl Error Second.
INT dsVdslPortErrorSecondClear	1.3.6.1.4.1.6296.9.1.1.2.8.1.92	INTEGER	read-write	To initialize Count of ErrorSecond .
INT dsVdslPortErrorSecondCurr15m	1.3.6.1.4.1.6296.9.1.1.2.8.1.25	INTEGER	read-only	The accumulating errored-second count of current 15 minute.
INT dsVdslPortErrorSecondCurr1day	1.3.6.1.4.1.6296.9.1.1.2.8.1.39	INTEGER	read-only	The accumulating errored-second count of current 1 day.
INT dsVdslPortErrorSecondPrev15m	1.3.6.1.4.1.6296.9.1.1.2.8.1.24	INTEGER	read-only	The accumulating errored-second count of previous 15 minute.
INT dsVdslPortErrorSecondPrev1day	1.3.6.1.4.1.6296.9.1.1.2.8.1.38	INTEGER	read-only	The accumulating errored-second count of previous 1 day.
INT dsVdslPortEwl	1.3.6.1.4.1.6296.9.1.1.2.8.1.86	INTEGER	read-only	Vdsl Port wire length.
INT dsVdslPortGhsFarEndEwl	1.3.6.1.4.1.6296.9.1.1.2.8.1.88	INTEGER	read-only	Vdsl Port Far End wire length.
INT dsVdslPortGhsNearEndEwl	1.3.6.1.4.1.6296.9.1.1.2.8.1.87	INTEGER	read-only	Vdsl Port Near End wire length.
C64 dsVdslPortHamband	1.3.6.1.4.1.6296.9.1.1.2.8.1.67	Counter64	read-write	dsVdsl Amature Radio(HAM) band ID. The value of Ham band is combination of the following value. If you want to set band1 and band10, you should set value 257(band1 + band10) to the Ham band. band1 [ 1.800 - 1.810 ] MHz : RFI Notch (1) band2 [ 1.800 - 1.825 ] MHz : KOREA HAM-BAND (2) band3 [ 1.810 - 1.825 ] MHz : ANNEX F (4) band4 [ 1.810 - 2.000 ] MHz : ETSI, T1E1 (8) band5 [ 1.9075 - 1.9125 ] MHz : ANNEX F (16) band6 [ 2.173 - 2.191 ] MHz : DT GMDSS (2097152) 0x0000 0020 0000 band7 [ 3.500 - 3.550 ] MHz : KOREA HAM-BAND (32) band8 [ 3.500 - 3.575 ] MHz : ANNEX F (64) band9 [ 3.500 - 3.800 ] MHz : ETSI (128) band10 [ 3.500 - 4.000 ] MHz : T1E1 (256) band11 [ 3.747 - 3.754 ] MHz : ANNEX F (512) band12 [ 3.790 - 3.800 ] MHz : KOREA HAM-BAND (1024) band13 [ 3.791 - 3.805 ] MHz : ANNEX F (2048) band14 [ 4.200 - 4.215 ] MHz : DT GMDSS (4194304) 0x0000 0040 0000 band15 [ 5.900 - 6.200 ] MHz : DT DRM radio (Broadcasting) (8388608) 0x0000 0080 0000 band16 [ 6.300 - 6.320 ] MHz : DT GMDSS (16777216) 0x0000 0100 0000 band17 [ 7.000 - 7.100 ] MHz : KOREA HAM-BAND, ANNEX F, ETSI (4096) band18 [ 7.000 - 7.300 ] MHz : T1E1 (8192) band19 [ 7.100 - 7.350 ] MHz : DT DRM radio (Broadcasting) (33554432) 0x0000 0200 0000 band20 [ 8.405 - 8.420 ] MHz : DT GMDSS (67108864) 0x0000 0400 0000 band21 [ 9.400 - 9.900 ] MHz : DT DRM radio (Broadcasting) (134217728) 0x0000 0800 0000 band22 [ 10.100 - 10.150 ] MHz : KOREA HAM-BAND, ANNEX F, ETSI, T1E1 (16384) band23 [ 11.600 - 12.100 ] MHz : DT DRM radio (Broadcasting) (268435456) 0x0000 1000 0000 band24 [ 12.570 - 12.585 ] MHz : DT GMDSS (536870912) 0x0000 2000 0000 band25 [ 13.570 - 13.870 ] MHz : DT DRM radio (Broadcasting) (1073741824) 0x0000 4000 0000 band26 [ 14.000 - 14.350 ] MHz : ANNEX F, ETSI, T1E1 (32768) band27 [ 15.100 - 15.800 ] MHz : DT DRM radio (Broadcasting) (2147483648) 0x0000 8000 0000 band28 [ 16.795 - 16.810 ] MHz : DT GMDSS (4294967296) 0x0001 0000 0000 band29 [ 17.480 - 17.900 ] MHz : DT DRM radio (Broadcasting) (8589934592) 0x0002 0000 0000 band30 [ 18.068 - 18.168 ] MHz : ANNEX F, ETSI, T1E1 (65536) band31 [ 21.000 - 21.450 ] MHz : ANNEX F, ETSI, T1E1 (131072) 0x0000 0002 0000 band32 [ 24.890 - 24.990 ] MHz : ANNEX F, ETST, T1E1 (262144) 0x0000 0004 0000 band33 [ 28.000 - 29.100 ] MHz : ETSI (524288) 0x0000 0008 0000 band34 [ 28.000 - 29.700 ] MHz : ANNEX F, ETSI, T1E1 (1048576) 0x0000 0010 0000
STR dsVdslPortHardwareAddress	1.3.6.1.4.1.6296.9.1.1.2.8.1.137	DisplayString	read-only	The Hardware Address of User.
OID dsVdslPortIfIndex	1.3.6.1.4.1.6296.9.1.1.2.8.1.4	OBJECT IDENTIFIER	read-only	matching ifIndex oid which is defined in interface mib.
INT dsVdslPortIndex	1.3.6.1.4.1.6296.9.1.1.2.8.1.2	INTEGER	read-only	A unique value, greater than zero, for each port. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
INT dsVdslPortLastRetraingReason	1.3.6.1.4.1.6296.9.1.1.2.8.1.143	INTEGER	read-only	.
INT dsVdslPortLineActiveTimeClear	1.3.6.1.4.1.6296.9.1.1.2.8.1.89	INTEGER	read-write	To initialize Line Active time.
INT dsVdslPortLineActiveTimeCurr1Day	1.3.6.1.4.1.6296.9.1.1.2.8.1.82	INTEGER	read-only	The accumulating Line Active time of current 1 day.
INT dsVdslPortLineActiveTimePrev1Day	1.3.6.1.4.1.6296.9.1.1.2.8.1.81	INTEGER	read-only	The accumulating Line Active time of previous 1 day.
INT dsVdslPortLineConfProfileClear	1.3.6.1.4.1.6296.9.1.1.2.8.1.83	INTEGER	read-write	To remove the line configure profile assigned to a physical port for a particular feature. This value should have 1 that means clear
INT dsVdslPortLineProfile	1.3.6.1.4.1.6296.9.1.1.2.8.1.122	INTEGER	read-write	sym25(1), asym50-3b(2), asym50-4b(3), asym70(4), asym100(5), sym100(6), 8a(8), 8b(9), 8c(10), 8d(11), 12a(12), 12b(13), 17a(14), 30a(15), 12a997(16), 12b997(17), v17a_8k(18)
INT dsVdslPortLinkUpTime	1.3.6.1.4.1.6296.9.1.1.2.8.1.142	INTEGER	read-only	LinkUp duration time of port.
INT dsVdslPortMiiInBPS	1.3.6.1.4.1.6296.9.1.1.2.8.1.134	INTEGER	read-only	.
INT dsVdslPortMiiInBytes	1.3.6.1.4.1.6296.9.1.1.2.8.1.133	INTEGER	read-only	.
INT dsVdslPortMiiOutBPS	1.3.6.1.4.1.6296.9.1.1.2.8.1.136	INTEGER	read-only	.
INT dsVdslPortMiiOutBytes	1.3.6.1.4.1.6296.9.1.1.2.8.1.135	INTEGER	read-only	.
INT dsVdslPortMode	1.3.6.1.4.1.6296.9.1.1.2.8.1.123	INTEGER	read-write	normal(1), isdn(2), adsl(3), adsl2(4), t-lan(5), adsl-safe(6)
INT dsVdslPortModemReset	1.3.6.1.4.1.6296.9.1.1.2.8.1.78	INTEGER	read-write	Reset the Modem.
INT dsVdslPortOptionband	1.3.6.1.4.1.6296.9.1.1.2.8.1.66	INTEGER	read-write	dsVdsl Optional band ID. Annex B 6-64 (1) Annex A 6-32 (2) Annex B 32-64 (3) Exclude Option Band (4)
INT dsVdslPortOutPower	1.3.6.1.4.1.6296.9.1.1.2.8.1.54	INTEGER	read-only	dsVdsl port Output Power.
INT dsVdslPortPBOLength	1.3.6.1.4.1.6296.9.1.1.2.8.1.73	INTEGER	read-write	dsVdsl Power Back-Off Length. 100m(1) 200m(2) 300m(3) 400m(4) 500m(5) 600m(6) 700m(7) 800m(8) 900m(9) 1000m(10)
INT dsVdslPortPerfRxCRC	1.3.6.1.4.1.6296.9.1.1.2.8.1.119	INTEGER	read-only	Rx CRC Count.
INT dsVdslPortPerfTxCRC	1.3.6.1.4.1.6296.9.1.1.2.8.1.120	INTEGER	read-only	Tx CRC Count.
INT dsVdslPortProfileSet	1.3.6.1.4.1.6296.9.1.1.2.8.1.124	INTEGER	read-write	.
INT dsVdslPortPSDMaskLevel	1.3.6.1.4.1.6296.9.1.1.2.8.1.72	INTEGER	read-write	dsVdsl PSD Mask Level. notavailable(-1) old gains(0) ANSI M1(1) ANSI M2(2) ETSI M1(3) ETSI M2(4) ANNEX F 8.5(5) ANSI M1 EX(6) ANSI M2 EX(7) ETSI M1 EX(8) ETSI M2 EX(9) ANNEX F 11.5(10) PSD-K(11)
INT dsVdslPortRedundancySet	1.3.6.1.4.1.6296.9.1.1.2.8.1.138	INTEGER	read-write	Redundancy Port Set.
INT dsVdslPortServiceError	1.3.6.1.4.1.6296.9.1.1.2.8.1.11	INTEGER	read-only	The raw accumulating dsVdsl service Error count.
INT dsVdslPortServiceErrorClear	1.3.6.1.4.1.6296.9.1.1.2.8.1.90	INTEGER	read-write	To initialize .
INT dsVdslPortServiceErrorCurr15m	1.3.6.1.4.1.6296.9.1.1.2.8.1.21	INTEGER	read-only	The accumulating Service-Error count of current 15 minute.
INT dsVdslPortServiceErrorCurr1day	1.3.6.1.4.1.6296.9.1.1.2.8.1.35	INTEGER	read-only	The accumulating Service-Error count of current 1 day.
INT dsVdslPortServiceErrorPrev15m	1.3.6.1.4.1.6296.9.1.1.2.8.1.20	INTEGER	read-only	The accumulating Serivce-Error count of previous 15 minute.
INT dsVdslPortServiceErrorPrev1day	1.3.6.1.4.1.6296.9.1.1.2.8.1.34	INTEGER	read-only	The accumulating Serivce-Error count of previous 1 day.
INT dsVdslPortStandard	1.3.6.1.4.1.6296.9.1.1.2.8.1.121	INTEGER	read-write	VDSL Standard.
INT dsVdslPortSuperFrameCountClear	1.3.6.1.4.1.6296.9.1.1.2.8.1.117	INTEGER	read-write	Rx SuperFrame Count Clear.
U32 dsVdslPortSuperFrameRxCount	1.3.6.1.4.1.6296.9.1.1.2.8.1.115	Unsigned32	read-only	Rx SuperFrame Count.
U32 dsVdslPortSuperFrameTxCount	1.3.6.1.4.1.6296.9.1.1.2.8.1.116	Unsigned32	read-only	Tx SuperFrame Count.
dsVdslPortTable	1.3.6.1.4.1.6296.9.1.1.2.8		not-accessible	A list of dsVdslPortEntry entries.
INT dsVdslPortTargetDownSNRMargin	1.3.6.1.4.1.6296.9.1.1.2.8.1.71	INTEGER	read-write	dsVdsl Target downstream SNR Margin(CPE SNR Margin).
INT dsVdslPortTargetUpSNRMargin	1.3.6.1.4.1.6296.9.1.1.2.8.1.70	INTEGER	read-write	dsVdsl Target upstream SNR Margin(CO SNR Margin).
INT dsVdslPortTCMAdmin	1.3.6.1.4.1.6296.9.1.1.2.8.1.128	INTEGER	read-write	.
STR dsVdslPortType	1.3.6.1.4.1.6296.9.1.1.2.8.1.3	DisplayString	read-only	The type of dsVdsl port. This string defines the type of port.
INT dsVdslPortU0BandPBOLength	1.3.6.1.4.1.6296.9.1.1.2.8.1.145	INTEGER	read-write	dsVdsl U0 Band Power Back-Off Length. 100m(1) 200m(2) 300m(3) 400m(4) 500m(5) 600m(6) 700m(7) 800m(8) 900m(9) 1000m(10)
INT dsVdslPortU1BandPBOLength	1.3.6.1.4.1.6296.9.1.1.2.8.1.146	INTEGER	read-write	dsVdsl U1 Band Power Back-Off Length. 100m(1) 200m(2) 300m(3) 400m(4) 500m(5) 600m(6) 700m(7) 800m(8) 900m(9) 1000m(10)
INT dsVdslPortU2BandPBOLength	1.3.6.1.4.1.6296.9.1.1.2.8.1.147	INTEGER	read-write	dsVdsl U2 Band Power Back-Off Length. 100m(1) 200m(2) 300m(3) 400m(4) 500m(5) 600m(6) 700m(7) 800m(8) 900m(9) 1000m(10)
INT dsVdslPortU3BandPBOLength	1.3.6.1.4.1.6296.9.1.1.2.8.1.148	INTEGER	read-write	dsVdsl U3 Band Power Back-Off Length. 100m(1) 200m(2) 300m(3) 400m(4) 500m(5) 600m(6) 700m(7) 800m(8) 900m(9) 1000m(10)
INT dsVdslPortUpAttenuation	1.3.6.1.4.1.6296.9.1.1.2.8.1.52	INTEGER	read-only	dsVdsl upstream port attenuation(CO Attenuation).
INT dsVdslPortUpboEnable	1.3.6.1.4.1.6296.9.1.1.2.8.1.126	INTEGER	read-write	.
G32 dsVdslPortUpCurrAttainableRate	1.3.6.1.4.1.6296.9.1.1.2.8.1.150	Gauge32	read-only	Indicates the maximum currently up attainable data rate in steps of 1000 bits/second by the Vtu. This value will be equal to or greater than vdslPhysCurrLineRate. Note that for SCM, the minimum and maximum data rates are equal. Note: 1 kbps = 1000 bps.
INT dsVdslPortUpINP	1.3.6.1.4.1.6296.9.1.1.2.8.1.131	INTEGER	read-write	dsVdsl upstream INP.
INT dsVdslPortUpInterleave	1.3.6.1.4.1.6296.9.1.1.2.8.1.68	INTEGER	read-write	dsVdslPort Upstream Interleave delay.
INT dsVdslPortUpPhysicalSpeed	1.3.6.1.4.1.6296.9.1.1.2.8.1.7	INTEGER	read-only	Upstream attainable speed of port. bits/second.
INT dsVdslPortUpProfile	1.3.6.1.4.1.6296.9.1.1.2.8.1.5	INTEGER	read-write	dsVdsl Upstream profile ID. sym11 (2) Symmetric 11/11 asym11 (1) Asymmetric 3/11 a-sym11 (0) ADSL friendly symmetric 11/11 a-asym11 (3) ADSL friendly asymmetric 3/11 a-sym13 (4) ADSL friendly symmetric 13/13 a-asym13 (6) ADSL friendly asymmetric 3/13 sym16 (5) Symmetric 16/16 tl13 (7) T-LAN friendly 13/13 tl16 (8) T-LAN friendly 16/16 tl16a (9) T-LAN friendly 13/16A (QAM20 ONLY) asym24 (11) PLAN998 Asymmetric 8/24 (QAM20 ONLY) asym18 (12) PLAN998 Asymmetric 8/18 (QAM20 ONLY) asym25 (13) PLAN998 Asymmetric Enhanced 8/25(QAM20 ONLY) asym26 (14) PLAN998 Asymmetric Enhanced 8/26(QAM20 ONLY) asym50-998n (51) PLAN998 Asymmetric asym50-998e (52) PLAN998E Asymmetric sym25-997 (53) PLAN997 Asymmetric asym50-998a (54) ADSL friendly PLAN 998 Asymetric asym50-998i (55) ISDN friendly PLAN 998 Asymetric asym50-998t (56) TLAN friendly PLAN 998 Asymetric asym50-998s (57) ADSL soft mode Asymetric asym50-998n-4b(58) PLAN998 Asymmetric 13/50 4 band asym50-998i-4b(59) ISDN friendly PLAN 998 13/50 4 band asym50-998a-4b(60) ADSL friendly PLAN 998 13/50 4 band sym25-997a(61) ADSL friendly PLAN 997 Symmetric 25/25 sym25-997i(62) ISDN friendly PLAN 997 symmetric 25/25 asym70-998n(63) PLAN998 Asymmetric 30/70 5 band asym70-998i(64) ISDN friendly PLAN 998 asymmetric 30/70 5 band asym70-998a(65) ADSL friendly PLAN 998 asymmetric 30/70 5 band asym100-998n(66) PLAN 998n Asymmetric for 6Band DMT 100M asym100-998i(67) PLAN 998i Asymmetric for 6Band DMT 100M asym100-998a(68) PLAN 998a Asymmetric for 6Band DMT 100M sym100-100-998n(69) PLAN 998n Symmetric for 6Band DMT 100/100M sym100-100-998i(70) PLAN 998i Symmetric for 6Band DMT 100/100M sym100-100-998a(71) PLAN 998a Symmetric for 6Band DMT 100/100M
INT dsVdslPortUpServiceProfile	1.3.6.1.4.1.6296.9.1.1.2.8.1.76	INTEGER	read-only	dsVdslPort upstream service profile.
INT dsVdslPortUpSNR	1.3.6.1.4.1.6296.9.1.1.2.8.1.48	INTEGER	read-only	dsVdsl upstream SNR * 1000.
INT dsVdslPortUpSNRMargin	1.3.6.1.4.1.6296.9.1.1.2.8.1.50	INTEGER	read-only	dsVdsl upstream SNR Margin(CO SNR Margin).
INT dsVdslPortUpSNRMinMargin	1.3.6.1.4.1.6296.9.1.1.2.8.1.129	INTEGER	read-write	dsVdsl upstream Min SNR Margin(CO Min SNR Margin).
INT dsVdslPortUpSpeed	1.3.6.1.4.1.6296.9.1.1.2.8.1.9	INTEGER	read-only	Upstream speed of port. bits/second.
INT dsVdslPortVOCLinkDuplex	1.3.6.1.4.1.6296.9.1.1.2.8.1.64	INTEGER	read-only	PC link duplex through VOC channel.
INT dsVdslPortVOCLinkSpeed	1.3.6.1.4.1.6296.9.1.1.2.8.1.65	INTEGER	read-only	PC link speed through VOC channel. bits/second(bps).
INT dsVdslPortVOCLinkStatus	1.3.6.1.4.1.6296.9.1.1.2.8.1.63	INTEGER	read-only	PC Ethernet link status through VOC channel.
INT dsVdslPortWanAdminStatus	1.3.6.1.4.1.6296.9.1.1.2.8.1.61	INTEGER	read-write	Administrative status of WAN port
INT dsVdslPortWanInErr	1.3.6.1.4.1.6296.9.1.1.2.8.1.56	INTEGER	read-only	dsVdsl WAN error packet count.
INT dsVdslPortWanInPkt	1.3.6.1.4.1.6296.9.1.1.2.8.1.55	INTEGER	read-only	dsVdsl WAN in-packet count.
INT dsVdslPortWanLoopbackAction	1.3.6.1.4.1.6296.9.1.1.2.8.1.59	INTEGER	read-write	Perform remote loopback ping test.
INT dsVdslPortWanLoopbackStatus	1.3.6.1.4.1.6296.9.1.1.2.8.1.60	INTEGER	read-only	Latest remote loopback test result.
INT dsVdslPortWanOperStatus	1.3.6.1.4.1.6296.9.1.1.2.8.1.62	INTEGER	read-only	Operational status of WAN port
INT dsVdslPortWanOutPkt	1.3.6.1.4.1.6296.9.1.1.2.8.1.57	INTEGER	read-only	dsVdsl WAN out-packet count.
INT dsVdslPortWanReset	1.3.6.1.4.1.6296.9.1.1.2.8.1.58	INTEGER	read-write	Reaquire dsVdsl line SYNC.
INT dsVdslSlotDownServiceProfile	1.3.6.1.4.1.6296.9.1.1.2.9.1.11	INTEGER	read-only	dsVdsl slot downstream service profile.
dsVdslSlotEntry	1.3.6.1.4.1.6296.9.1.1.2.9.1		not-accessible	An entry containing management information applicable to a particular dsVdsl Slot.
C64 dsVdslSlotHamband	1.3.6.1.4.1.6296.9.1.1.2.9.1.7	Counter64	read-write	dsVdsl Amature Radio(HAM) band ID. The value of Ham band is combination of the following value. If you want to set band1 and band10, you should set value 257(band1 + band10) to the Ham band. band1 [ 1.800 - 1.810 ] MHz : RFI Notch (1) band2 [ 1.800 - 1.825 ] MHz : KOREA HAM-BAND (2) band3 [ 1.810 - 1.825 ] MHz : ANNEX F (4) band4 [ 1.810 - 2.000 ] MHz : ETSI, T1E1 (8) band5 [ 1.9075 - 1.9125 ] MHz : ANNEX F (16) band6 [ 2.173 - 2.191 ] MHz : DT GMDSS (2097152) 0x0000 0020 0000 band7 [ 3.500 - 3.550 ] MHz : KOREA HAM-BAND (32) band8 [ 3.500 - 3.575 ] MHz : ANNEX F (64) band9 [ 3.500 - 3.800 ] MHz : ETSI (128) band10 [ 3.500 - 4.000 ] MHz : T1E1 (256) band11 [ 3.747 - 3.754 ] MHz : ANNEX F (512) band12 [ 3.790 - 3.800 ] MHz : KOREA HAM-BAND (1024) band13 [ 3.791 - 3.805 ] MHz : ANNEX F (2048) band14 [ 4.200 - 4.215 ] MHz : DT GMDSS (4194304) 0x0000 0040 0000 band15 [ 5.900 - 6.200 ] MHz : DT DRM radio (Broadcasting) (8388608) 0x0000 0080 0000 band16 [ 6.300 - 6.320 ] MHz : DT GMDSS (16777216) 0x0000 0100 0000 band17 [ 7.000 - 7.100 ] MHz : KOREA HAM-BAND, ANNEX F, ETSI (4096) band18 [ 7.000 - 7.300 ] MHz : T1E1 (8192) band19 [ 7.100 - 7.350 ] MHz : DT DRM radio (Broadcasting) (33554432) 0x0000 0200 0000 band20 [ 8.405 - 8.420 ] MHz : DT GMDSS (67108864) 0x0000 0400 0000 band21 [ 9.400 - 9.900 ] MHz : DT DRM radio (Broadcasting) (134217728) 0x0000 0800 0000 band22 [ 10.100 - 10.150 ] MHz : KOREA HAM-BAND, ANNEX F, ETSI, T1E1 (16384) band23 [ 11.600 - 12.100 ] MHz : DT DRM radio (Broadcasting) (268435456) 0x0000 1000 0000 band24 [ 12.570 - 12.585 ] MHz : DT GMDSS (536870912) 0x0000 2000 0000 band25 [ 13.570 - 13.870 ] MHz : DT DRM radio (Broadcasting) (1073741824) 0x0000 4000 0000 band26 [ 14.000 - 14.350 ] MHz : ANNEX F, ETSI, T1E1 (32768) band27 [ 15.100 - 15.800 ] MHz : DT DRM radio (Broadcasting) (2147483648) 0x0000 8000 0000 band28 [ 16.795 - 16.810 ] MHz : DT GMDSS (4294967296) 0x0001 0000 0000 band29 [ 17.480 - 17.900 ] MHz : DT DRM radio (Broadcasting) (8589934592) 0x0002 0000 0000 band30 [ 18.068 - 18.168 ] MHz : ANNEX F, ETSI, T1E1 (65536) band31 [ 21.000 - 21.450 ] MHz : ANNEX F, ETSI, T1E1 (131072) 0x0000 0002 0000 band32 [ 24.890 - 24.990 ] MHz : ANNEX F, ETST, T1E1 (262144) 0x0000 0004 0000 band33 [ 28.000 - 29.100 ] MHz : ETSI (524288) 0x0000 0008 0000 band34 [ 28.000 - 29.700 ] MHz : ANNEX F, ETSI, T1E1 (1048576) 0x0000 0010 0000
INT dsVdslSlotIndex	1.3.6.1.4.1.6296.9.1.1.2.9.1.2	INTEGER	read-only	A unique value, greater than zero, for each slot. It is recommended that values are assigned contiguously starting from 1.
INT dsVdslSlotInstallStatus	1.3.6.1.4.1.6296.9.1.1.2.9.1.4	INTEGER	read-only	The current install status of each slot.
INT dsVdslSlotLIUCPENOSStore	1.3.6.1.4.1.6296.9.1.1.2.9.1.13	INTEGER	read-write	Store CPE NOS into each dsVdsl slot. no(0) : No CPE NOS store. yes(1) : Now storing. done(2) : Storing completed. fail(3) : Storing fail
INT dsVdslSlotLIUReboot	1.3.6.1.4.1.6296.9.1.1.2.9.1.12	INTEGER	read-write	dsVdsl LIU slot reboot.
INT dsVdslSlotModuleIndex	1.3.6.1.4.1.6296.9.1.1.2.9.1.1	INTEGER	read-only	A unique value, greater than zero, for each module(Node). It is recommended that values are assigned contiguously starting from 1.
INT dsVdslSlotOptionband	1.3.6.1.4.1.6296.9.1.1.2.9.1.6	INTEGER	read-write	dsVdsl Optional band ID. Annex B 6-64 (1) Annex A 6-32 (2) Annex B 32-64 (3) Exclude Option Band (4)
INT dsVdslSlotPBOLength	1.3.6.1.4.1.6296.9.1.1.2.9.1.9	INTEGER	read-write	dsVdsl Power Back-Off Length. 100m(1) 200m(2) 300m(3) 400m(4) 500m(5) 600m(6) 700m(7) 800m(8) 900m(9)
INT dsVdslSlotProfile	1.3.6.1.4.1.6296.9.1.1.2.9.1.5	INTEGER	read-write	dsVdsl profile ID. asym50-998n (51) PLAN998 Asymmetric asym50-998e (52) PLAN998E Asymmetric sym25-997 (53) PLAN997 Asymmetric asym50-998a (54) ADSL friendly PLAN 998 Asymetric asym50-998i (55) ISDN friendly PLAN 998 Asymetric asym50-998t (56) TLAN friendly PLAN 998 Asymetric asym50-998s (57) ADSL soft mode Asymetric asym50-998n-4b(58) PLAN998 Asymmetric 13/50 4 band asym50-998i-4b(59) ISDN friendly PLAN 998 13/50 4 band asym50-998a-4b(60) ADSL friendly PLAN 998 13/50 4 band sym25-997a(61) ADSL friendly PLAN 997 Symmetric 25/25 sym25-997i(62) ISDN friendly PLAN 997 symmetric 25/25 asym70-998n(63) PLAN998 Asymmetric 30/70 5 band asym70-998i(64) ISDN friendly PLAN 998 asymmetric 30/70 5 band asym70-998a(65) ADSL friendly PLAN 998 asymmetric 30/70 5 band asym100-998n(66) PLAN 998n Asymmetric for 6Band DMT 100M asym100-998i(67) PLAN 998i Asymmetric for 6Band DMT 100M asym100-998a(68) PLAN 998a Asymmetric for 6Band DMT 100M sym100-100-998n(69) PLAN 998n Symmetric for 6Band DMT 100/100M sym100-100-998i(70) PLAN 998i Symmetric for 6Band DMT 100/100M sym100-100-998a(71) PLAN 998a Symmetric for 6Band DMT 100/100M
INT dsVdslSlotPSDMaskLevel	1.3.6.1.4.1.6296.9.1.1.2.9.1.8	INTEGER	read-write	dsVdsl PSD Mask Level. notavailable(-1) old gains(0) ANSI M1(1) ANSI M2(2) ETSI M1(3) ETSI M2(4) ANNEX F 8.5(5) ANSI M1 EX(6) ANSI M2 EX(7) ETSI M1 EX(8) ETSI M2 EX(9) ANNEX F 11.5(10) PSD-K(11)
dsVdslSlotTable	1.3.6.1.4.1.6296.9.1.1.2.9		not-accessible	A list of dsVdslSlotEntry entries.
STR dsVdslSlotType	1.3.6.1.4.1.6296.9.1.1.2.9.1.3	DisplayString	read-only	The type of each slot. This string defines the type of slot ex) Vdsl, GBIC.
INT dsVdslSlotUpServiceProfile	1.3.6.1.4.1.6296.9.1.1.2.9.1.10	INTEGER	read-only	dsVdsl slot upstream service profile.
INT dsWriteConfig	1.3.6.1.4.1.6296.9.1.1.1.2	INTEGER	read-write	Write current running configuration to flash memory.

FAQ

How can I verify which VLANs and trunk groups are currently active on a Dasan managed switch?
DASAN-SWITCH-MIB exposes port VLAN membership and trunk/link-aggregation group status objects, letting an operator confirm which ports belong to which VLAN and which trunk groups are currently up, useful when validating a switch's config matches what was intended after a change.

How would I check the forwarding table on a Dasan switch to troubleshoot a connectivity issue between two hosts?
The MIB provides forwarding table entries alongside per-port configuration state, so an administrator can poll which MAC addresses are learned on which ports and cross-reference that against port config to isolate where traffic is being dropped or misforwarded.

RFC description

Dasan switch management MIB for network switch monitoring and configuration.

Start monitoring Dasan Networks (Dasan Zhone) managed Ethernet switch with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download DASAN-SWITCH-MIB