All MIBs › CTRON-SFPS-L4SS-MIB
Category: Vendor: Cabletron/Enterasys
Description: Manages Cabletron SFPS Layer 4 switching service for application-aware forwarding and session steering.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is CTRON-SFPS-L4SS-MIB?
CTRON-SFPS-L4SS-MIB is a Cabletron Systems proprietary MIB for Layer 4 Switching Services (L4SS) on the SecureFast Packet Switching (SFPS) architecture, controlling flow classification based on TCP/IP session state. It exposes a global control over whether TCP segments with the ACK bit off are always treated as flow-setup exception packets, alongside a flow table recording each flow's connection index, primary/secondary Layer 3 addresses, and sub-protocol. As a configuration/protocol-status MIB it lets an administrator audit active Layer 4 flow classifications and confirm the TCP ACK-handling policy matches the intended security/performance posture. It is deployed on Cabletron SecureFast switches with Layer 4 switching services enabled. Engineers can download the CTRON-SFPS-L4SS-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in CTRON-SFPS-L4SS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Cabletron Systems SecureFast switches (Layer 4 Switching Services)
Monitoring Examples
An administrator reviews sfpsL4CPFlowTable to confirm a specific application's traffic is being classified into the expected Layer 4 flow, and checks sfpsL4CPDisableTCPAckCheck to understand how non-ACK TCP segments are being handled fabric-wide.
What Can Be Monitored
- active Layer 4 flow classifications
- TCP ACK-exception handling policy
This MIB depends on
Related MIBs
Imported Objects
| switchSFPS | OBJECT-IDENTITY |
From RFC-1212
| OBJECT-TYPE |
From RFC1155-SMI
| Counter | |
| IpAddress | |
| TimeTicks |
From RFC1213-MIB
| DisplayString | |
| PhysAddress |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| sfpsL4SS | 1.3.6.1.4.1.52.4.2.4.2.6 | |||
| sfpsL4CP | 1.3.6.1.4.1.52.4.2.4.2.6.1 | |||
| l4cpStats | 1.3.6.1.4.1.52.4.2.4.2.6.1.1 | |||
| l4cpConfig | 1.3.6.1.4.1.52.4.2.4.2.6.1.2 | |||
| INT sfpsL4CPDisableTCPAckCheck | 1.3.6.1.4.1.52.4.2.4.2.6.1.2.1 | INTEGER | read-write | This variable indicates whether or not TCP segments whose ACK bit is off are allowed to use an existing flow table entry. When set to 2, a TCP segment whose ACK bit is off is always treated as an exception packet. This variable takes effect immediately, and its value is peristent. |
| l4cpActions | 1.3.6.1.4.1.52.4.2.4.2.6.1.3 | |||
| sfpsL4CPFlowTable | 1.3.6.1.4.1.52.4.2.4.2.6.1.4 | not-accessible | This table describes each conversation between a pair or Layer 3 or Layer 4 endpoints. | |
| sfpsL4CPFlowEntry | 1.3.6.1.4.1.52.4.2.4.2.6.1.4.1 | not-accessible | Each entry contains statistics and information for a pair of Layer 3 or Layer 4 endpoints. | |
| INT sfpsL4CPFlowCnxIndex | 1.3.6.1.4.1.52.4.2.4.2.6.1.4.1.1 | INTEGER | read-only | Index (1-based) of the SFPSGAPI connection table entry to which this flow belongs. |
| STR sfpsL4CPFlowSecL3Address | 1.3.6.1.4.1.52.4.2.4.2.6.1.4.1.2 | DisplayString | read-only | The Layer 3 address of the secondary endpoint for this flow. The secondary endpoint is the one having the higher MAC address. |
| STR sfpsL4CPFlowPrimL3Address | 1.3.6.1.4.1.52.4.2.4.2.6.1.4.1.3 | DisplayString | read-only | The Layer 3 address of the primary endpoint for this flow. The primary endpoint is the one having the lower MAC address. |
| NUM sfpsL4CPFlowSubprotocol | 1.3.6.1.4.1.52.4.2.4.2.6.1.4.1.4 | HexInteger | read-only | This value identifies the Layer 4 protocol. It corresponds to the IP 'Protocol' field as described in the 'Assigned Numbers' RFC. |
| INT sfpsL4CPFlowSecMatchAnyDyn | 1.3.6.1.4.1.52.4.2.4.2.6.1.4.1.5 | INTEGER | read-only | If this is a TCP or UDP entry, this value specifies whether or not the protocol port of the secondary endpoint should be treated as a wildcard, able to match any port number above 1023. |
| INT sfpsL4CPFlowPrimMatchAnyDyn | 1.3.6.1.4.1.52.4.2.4.2.6.1.4.1.6 | INTEGER | read-only | If this is a TCP or UDP entry, this value specifies whether or not the protocol port of the primary endpoint should be treated as a wildcard, able to match any port number above 1023. |
| INT sfpsL4CPFlowSecProtPort | 1.3.6.1.4.1.52.4.2.4.2.6.1.4.1.7 | INTEGER | read-only | If this is a TCP or UDP entry, this value indicates the protocol port number of the secondary endpoint. Otherwise, this field is zero. |
| INT sfpsL4CPFlowPrimProtPort | 1.3.6.1.4.1.52.4.2.4.2.6.1.4.1.8 | INTEGER | read-only | If this is a TCP or UDP entry, this value indicates the protocol port number of the primary endpoint. Otherwise, this field is zero. |
| INT sfpsL4CPFlowSecSubstApplies | 1.3.6.1.4.1.52.4.2.4.2.6.1.4.1.9 | INTEGER | read-only | Indication of whether or not MAC address substitution applies to the secondary endpoint for this flow. |
| INT sfpsL4CPFlowPrimSubstApplies | 1.3.6.1.4.1.52.4.2.4.2.6.1.4.1.10 | INTEGER | read-only | Indication of whether or not MAC address substitution applies to the primary endpoint for this flow. |
| CTR sfpsL4CPFlowSecInPkts | 1.3.6.1.4.1.52.4.2.4.2.6.1.4.1.11 | Counter | read-only | Count of packets transmitted from primary to secondary. |
| CTR sfpsL4CPFlowSecInOctets | 1.3.6.1.4.1.52.4.2.4.2.6.1.4.1.12 | Counter | read-only | Count of octets transmitted from primary to secondary. |
| CTR sfpsL4CPFlowPrimInPkts | 1.3.6.1.4.1.52.4.2.4.2.6.1.4.1.13 | Counter | read-only | Count of packets transmitted from secondary to primary. |
| CTR sfpsL4CPFlowPrimInOctets | 1.3.6.1.4.1.52.4.2.4.2.6.1.4.1.14 | Counter | read-only | Count of octets transmitted from secondary to primary. |
| TIK sfpsL4CPFlowFlowAge | 1.3.6.1.4.1.52.4.2.4.2.6.1.4.1.15 | TimeTicks | read-only | Time elapsed since this entry was created. |
| TIK sfpsL4CPFlowFlowLastUse | 1.3.6.1.4.1.52.4.2.4.2.6.1.4.1.16 | TimeTicks | read-only | Time elapsed since this entry was last used to send data. |
| INT sfpsL4CPFlowID | 1.3.6.1.4.1.52.4.2.4.2.6.1.4.1.17 | INTEGER | read-only | The Call Detail Recording flow ID for this flow, or zero if CDR is not active for the flow. |
| sfpsL4CPMACAddrSubTable | 1.3.6.1.4.1.52.4.2.4.2.6.1.5 | not-accessible | This table provides the ability to override the default gateway for specific routes. | |
| sfpsL4CPMACAddrSubEntry | 1.3.6.1.4.1.52.4.2.4.2.6.1.5.1 | not-accessible | Each entry contains the MAC address substitution information associated with a specific destination IP address. | |
| IP sfpsL4CPMACAddrSubDestIP | 1.3.6.1.4.1.52.4.2.4.2.6.1.5.1.1 | IpAddress | read-only | Destination IP address for this route |
| PHY sfpsL4CPMACAddrSubNextHopMAC | 1.3.6.1.4.1.52.4.2.4.2.6.1.5.1.2 | PhysAddress | read-only | The next-hop MAC address to use for this route. |
| INT sfpsL4CPMACAddrSubRefCount | 1.3.6.1.4.1.52.4.2.4.2.6.1.5.1.3 | INTEGER | read-only | The number of flow table entries that reference this entry. |
| sfpsL4CPNetAddrUserTable | 1.3.6.1.4.1.52.4.2.4.2.6.1.7 | not-accessible | This table associates user information with network addresses. | |
| sfpsL4CPNetAddrUserEntry | 1.3.6.1.4.1.52.4.2.4.2.6.1.7.1 | not-accessible | Each entry contains the user information associated with a specific network address. | |
| INT sfpsL4CPNetAddrUserProtocol | 1.3.6.1.4.1.52.4.2.4.2.6.1.7.1.1 | INTEGER | read-only | The network-layer protocol associated with this entry. Values correspond to the 'aoAddressTag' enumeration (see aoproperties.h). |
| STR sfpsL4CPNetAddrUserNetAddr | 1.3.6.1.4.1.52.4.2.4.2.6.1.7.1.2 | DisplayString | read-only | The network-layer address associated with this entry. |
| INT sfpsL4CPNetAddrUserLoginID | 1.3.6.1.4.1.52.4.2.4.2.6.1.7.1.3 | INTEGER | read-only | The login ID from CSM's LoginOID. Set to zero if no user is logged into the address. |
| INT sfpsL4CPNetAddrUserUserID | 1.3.6.1.4.1.52.4.2.4.2.6.1.7.1.4 | INTEGER | read-only | The object ID from CSM's UserOID. |
| STR sfpsL4CPNetAddrUserUserName | 1.3.6.1.4.1.52.4.2.4.2.6.1.7.1.5 | DisplayString | read-only | The user name associated with this entry. |
| sfpsL4CPIPRouteTable | 1.3.6.1.4.1.52.4.2.4.2.6.1.8 | not-accessible | This table associates IP routes (subnets) with devices. | |
| sfpsL4CPIPRouteEntry | 1.3.6.1.4.1.52.4.2.4.2.6.1.8.1 | not-accessible | Each entry contains the IP route information associated with a specific device. | |
| IP sfpsL4CPIPRouteSubnetMask | 1.3.6.1.4.1.52.4.2.4.2.6.1.8.1.1 | IpAddress | read-only | The subnet mask associated with this route. |
| IP sfpsL4CPIPRouteSubnet | 1.3.6.1.4.1.52.4.2.4.2.6.1.8.1.2 | IpAddress | read-only | The destination subnet of this route. |
| INT sfpsL4CPIPRouteRouteID | 1.3.6.1.4.1.52.4.2.4.2.6.1.8.1.3 | INTEGER | read-only | The object ID from CSM's RouteOID. |
| INT sfpsL4CPIPRouteRouteSubsystem | 1.3.6.1.4.1.52.4.2.4.2.6.1.8.1.4 | INTEGER | read-only | Indicates type of device route. |
| INT sfpsL4CPIPRouteDeviceID | 1.3.6.1.4.1.52.4.2.4.2.6.1.8.1.5 | INTEGER | read-only | The object ID from CSM's DeviceOID. |
| STR sfpsL4CPIPRouteDeviceName | 1.3.6.1.4.1.52.4.2.4.2.6.1.8.1.6 | DisplayString | read-only | The device name for this route. |
| ADR sfpsL4CPIPRouteMACAddress | 1.3.6.1.4.1.52.4.2.4.2.6.1.8.1.7 | SfpsAddress | read-only | The MAC address of the device for this route. |
| INT sfpsL4CPIPRouteMetric | 1.3.6.1.4.1.52.4.2.4.2.6.1.8.1.8 | INTEGER | read-only | The metric associated with this route. |
| INT sfpsL4CPIPRouteCallable | 1.3.6.1.4.1.52.4.2.4.2.6.1.8.1.9 | INTEGER | read-only | Indicates whether or not the device associated with this route is callable for IP. |
| sfpsL4CPPortTable | 1.3.6.1.4.1.52.4.2.4.2.6.1.9 | not-accessible | This table lists the attributes of an access servers ports. | |
| sfpsL4CPPortEntry | 1.3.6.1.4.1.52.4.2.4.2.6.1.9.1 | not-accessible | Each entry contains information about one of this access server's ports. | |
| INT sfpsL4CPPortNum | 1.3.6.1.4.1.52.4.2.4.2.6.1.9.1.1 | INTEGER | read-only | The logical port number of this port. |
| INT sfpsL4CPPortID | 1.3.6.1.4.1.52.4.2.4.2.6.1.9.1.2 | INTEGER | read-only | The last four octets of CSM's PortOID for this port. |
| INT sfpsL4CPPortApplyPolicyIn | 1.3.6.1.4.1.52.4.2.4.2.6.1.9.1.3 | INTEGER | read-only | Indicates whether or not access policies are to be applied to packets arriving at this port. |
| INT sfpsL4CPPortApplyPolicyOut | 1.3.6.1.4.1.52.4.2.4.2.6.1.9.1.4 | INTEGER | read-only | Indicates whether or not access policies are to be applied to packets sent out this port. |
| INT sfpsL4CPPortDefaultUserID | 1.3.6.1.4.1.52.4.2.4.2.6.1.9.1.5 | INTEGER | read-only | The last four octets of CSM's UserOID for the default userid for this port. |
| STR sfpsL4CPPortDefaultUserName | 1.3.6.1.4.1.52.4.2.4.2.6.1.9.1.6 | DisplayString | read-only | The user name assigned to MAC addresses discovered on this port. |
| sfpsL4CPCallableDeviceTable | 1.3.6.1.4.1.52.4.2.4.2.6.1.11 | not-accessible | This table lists the attributes of a callable device. | |
| sfpsL4CPCallableDeviceEntry | 1.3.6.1.4.1.52.4.2.4.2.6.1.11.1 | not-accessible | Each entry contains information about one of this access server's ports. | |
| INT sfpsL4CPCallableDeviceDeviceID | 1.3.6.1.4.1.52.4.2.4.2.6.1.11.1.1 | INTEGER | read-only | The last four octets of CSM's DeviceOID for this callable device. |
| STR sfpsL4CPCallableDeviceDeviceName | 1.3.6.1.4.1.52.4.2.4.2.6.1.11.1.2 | DisplayString | read-only | The default device name for this callable device. |
| STR sfpsL4CPCallableDeviceDefaultUserName | 1.3.6.1.4.1.52.4.2.4.2.6.1.11.1.3 | DisplayString | read-only | The default user name for this callable device. |
| sfpsL4CDR | 1.3.6.1.4.1.52.4.2.4.2.6.2 | |||
| l4cdrStats | 1.3.6.1.4.1.52.4.2.4.2.6.2.1 | |||
| l4cdrConfig | 1.3.6.1.4.1.52.4.2.4.2.6.2.2 | |||
| l4cdrActions | 1.3.6.1.4.1.52.4.2.4.2.6.2.3 | |||
| sfpsL4CDRActiveFlowTable | 1.3.6.1.4.1.52.4.2.4.2.6.2.4 | not-accessible | This table lists the currently active flows that have Call Detail Recording enabled. | |
| sfpsL4CDRActiveFlowEntry | 1.3.6.1.4.1.52.4.2.4.2.6.2.4.1 | not-accessible | Each entry contains information about one flow that has CDR enabled. | |
| INT sfpsL4CDRActiveFlowFlowID | 1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.1 | INTEGER | read-only | Flow ID for this flow. |
| INT sfpsL4CDRActiveFlowSubProtocol | 1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.2 | INTEGER | read-only | If this is a Layer 4 flow, this value identifies the Layer 4 protocol (for IP, this value corresponds to the 'Protocol' field as described in the 'Assigned Numbers' RFC). If this is a Layer 3 flow, this value is zero. |
| INT sfpsL4CDRActiveFlowEtherType | 1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.3 | INTEGER | read-only | The Layer 3 protocol represented by this entry. Values correspond to the 'Ether Type' field as described in the Assigned Numbers RFC. |
| STR sfpsL4CDRActiveFlowSourceUser | 1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.4 | DisplayString | read-only | The user name associated with the source of the flow. |
| STR sfpsL4CDRActiveFlowSourceMACAddr | 1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.5 | DisplayString | read-only | The MAC address associated with the source of the flow. |
| STR sfpsL4CDRActiveFlowSourceNetAddr | 1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.6 | DisplayString | read-only | The Layer 3 address associated with the source of the flow. |
| INT sfpsL4CDRActiveFlowSourceProtocolPort | 1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.7 | INTEGER | read-only | If this is a Layer 4 flow, this value indicates the protocol port number of the source of the flow. Otherwise, this field is zero. |
| INT sfpsL4CDRActiveFlowSourcePPRangeEnabled | 1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.8 | INTEGER | read-only | Indicates whether or not any source protocol port number greater than 1023 is considered to match the source protocol port with which this flow was created. |
| INT sfpsL4CDRActiveFlowSourceConnNumber | 1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.9 | INTEGER | read-only | The source connection number. |
| STR sfpsL4CDRActiveFlowDestUser | 1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.10 | DisplayString | read-only | The user name associated with the destination of the flow. |
| STR sfpsL4CDRActiveFlowDestMACAddr | 1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.11 | DisplayString | read-only | The MAC address associated with the destination of the flow. |
| STR sfpsL4CDRActiveFlowDestNetAddr | 1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.12 | DisplayString | read-only | The Layer 3 address associated with the destination of the flow. |
| INT sfpsL4CDRActiveFlowDestProtocolPort | 1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.13 | INTEGER | read-only | If this is a Layer 4 flow, this value indicates the protocol port number of the destination of the flow. Otherwise, this field is zero. |
| INT sfpsL4CDRActiveFlowDestPPRangeEnabled | 1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.14 | INTEGER | read-only | Indicates whether or not any destination protocol port number greater than 1023 is considered to match the destination protocol port with which this flow was created. |
| INT sfpsL4CDRActiveFlowDestConnNumber | 1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.15 | INTEGER | read-only | The destination connection number. |
| TIK sfpsL4CDRActiveFlowStartTime | 1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.16 | TimeTicks | read-only | The time elapsed since this flow was created. |
| TIK sfpsL4CDRActiveFlowLastPktTime | 1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.17 | TimeTicks | read-only | The time elapsed since the most recent packet was sent on this flow. |
| TIK sfpsL4CDRActiveFlowEndTime | 1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.18 | TimeTicks | read-only | The time elapsed since this flow was terminated. This field is not meaningful for active flows. |
| CTR sfpsL4CDRActiveFlowInOctets | 1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.19 | Counter | read-only | The number of octets that have been sent from the destination to the source. |
| CTR sfpsL4CDRActiveFlowOutOctets | 1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.20 | Counter | read-only | The number of octets that have been sent from the source to the destination. |
| CTR sfpsL4CDRActiveFlowInPkts | 1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.21 | Counter | read-only | The number of packets that have been sent from the destination to the source. |
| CTR sfpsL4CDRActiveFlowOutPkts | 1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.22 | Counter | read-only | The number of packets that have been sent from the source to the destination. |
| INT sfpsL4CDRActiveFlowDemandAccessConnMade | 1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.23 | INTEGER | read-only | Indicates whether or not a demand access connection had to be made for this flow. |
| INT sfpsL4CDRActiveFlowFlowRecordState | 1.3.6.1.4.1.52.4.2.4.2.6.2.4.1.24 | INTEGER | read-only | Indicates the current state of the flow record. |
| sfpsL4CDRTermedFlowTable | 1.3.6.1.4.1.52.4.2.4.2.6.2.5 | not-accessible | This table lists the terminated flows that had Call Detail Recording enabled. | |
| sfpsL4CDRTermedFlowEntry | 1.3.6.1.4.1.52.4.2.4.2.6.2.5.1 | not-accessible | Each entry contains information about one flow that had CDR enabled. | |
| INT sfpsL4CDRTermedFlowFlowID | 1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.1 | INTEGER | read-only | Flow ID for this flow. |
| INT sfpsL4CDRTermedFlowSubProtocol | 1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.2 | INTEGER | read-only | If this is a Layer 4 flow, this value identifies the Layer 4 protocol (for IP, this value corresponds to the 'Protocol' field as described in the 'Assigned Numbers' RFC). If this is a Layer 3 flow, this value is zero. |
| INT sfpsL4CDRTermedFlowEtherType | 1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.3 | INTEGER | read-only | The Layer 3 protocol represented by this entry. Values correspond to the 'Ether Type' field as described in the Assigned Numbers RFC. |
| STR sfpsL4CDRTermedFlowSourceUser | 1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.4 | DisplayString | read-only | The user name associated with the source of the flow. |
| STR sfpsL4CDRTermedFlowSourceMACAddr | 1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.5 | DisplayString | read-only | The MAC address associated with the source of the flow. |
| STR sfpsL4CDRTermedFlowSourceNetAddr | 1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.6 | DisplayString | read-only | The Layer 3 address associated with the source of the flow. |
| INT sfpsL4CDRTermedFlowSourceProtocolPort | 1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.7 | INTEGER | read-only | If this is a Layer 4 flow, this value indicates the protocol port number of the source of the flow. Otherwise, this field is zero. |
| INT sfpsL4CDRTermedFlowSourcePPRangeEnabled | 1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.8 | INTEGER | read-only | Indicates whether or not any source protocol port number greater than 1023 is considered to match the source protocol port with which this flow was created. |
| INT sfpsL4CDRTermedFlowSourceConnNumber | 1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.9 | INTEGER | read-only | The source connection number. |
| STR sfpsL4CDRTermedFlowDestUser | 1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.10 | DisplayString | read-only | The user name associated with the destination of the flow. |
| STR sfpsL4CDRTermedFlowDestMACAddr | 1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.11 | DisplayString | read-only | The MAC address associated with the destination of the flow. |
| STR sfpsL4CDRTermedFlowDestNetAddr | 1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.12 | DisplayString | read-only | The Layer 3 address associated with the destination of the flow. |
| INT sfpsL4CDRTermedFlowDestProtocolPort | 1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.13 | INTEGER | read-only | If this is a Layer 4 flow, this value indicates the protocol port number of the destination of the flow. Otherwise, this field is zero. |
| INT sfpsL4CDRTermedFlowDestPPRangeEnabled | 1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.14 | INTEGER | read-only | Indicates whether or not any destination protocol port number greater than 1023 is considered to match the destination protocol port with which this flow was created. |
| INT sfpsL4CDRTermedFlowDestConnNumber | 1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.15 | INTEGER | read-only | The destination connection number. |
| TIK sfpsL4CDRTermedFlowStartTime | 1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.16 | TimeTicks | read-only | The time elapsed since this flow was created. |
| TIK sfpsL4CDRTermedFlowLastPktTime | 1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.17 | TimeTicks | read-only | The time elapsed since the most recent packet was sent on this flow. |
| TIK sfpsL4CDRTermedFlowEndTime | 1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.18 | TimeTicks | read-only | The time elapsed since this flow was terminated. |
| CTR sfpsL4CDRTermedFlowInOctets | 1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.19 | Counter | read-only | The number of octets that have been sent from the destination to the source. |
| CTR sfpsL4CDRTermedFlowOutOctets | 1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.20 | Counter | read-only | The number of octets that have been sent from the source to the destination. |
| CTR sfpsL4CDRTermedFlowInPkts | 1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.21 | Counter | read-only | The number of packets that have been sent from the destination to the source. |
| CTR sfpsL4CDRTermedFlowOutPkts | 1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.22 | Counter | read-only | The number of packets that have been sent from the source to the destination. |
| INT sfpsL4CDRTermedFlowDemandAccessConnMade | 1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.23 | INTEGER | read-only | Indicates whether or not a demand access connection had to be made for this flow. |
| INT sfpsL4CDRTermedFlowFlowRecordState | 1.3.6.1.4.1.52.4.2.4.2.6.2.5.1.24 | INTEGER | read-only | Indicates the current state of the flow record. |
| sfpsL4CDRFlowIndexTable | 1.3.6.1.4.1.52.4.2.4.2.6.2.6 | not-accessible | This table lists the current flows that have Call Detail Recording enabled. | |
| sfpsL4CDRFlowIndexEntry | 1.3.6.1.4.1.52.4.2.4.2.6.2.6.1 | not-accessible | Each entry contains information about one flow that has CDR enabled. | |
| INT sfpsL4CDRFlowIndexFlowID | 1.3.6.1.4.1.52.4.2.4.2.6.2.6.1.1 | INTEGER | read-only | Flow ID for this flow. |
| INT sfpsL4CDRFlowIndexSFPSFlowTblIndex | 1.3.6.1.4.1.52.4.2.4.2.6.2.6.1.2 | INTEGER | read-only | Index of the SFPS Flow Table entry (1-based) that corresponds to this flow. |
| INT sfpsL4CDRFlowIndexSFlowStatsPtr | 1.3.6.1.4.1.52.4.2.4.2.6.2.6.1.3 | INTEGER | read-only | Pointer to the SFlowStats object for this flow. |
| INT sfpsL4CDRFlowIndexStaticFlowInfoPtr | 1.3.6.1.4.1.52.4.2.4.2.6.2.6.1.4 | INTEGER | read-only | Pointer to the L4CDRStaticFlowInfo object for this flow. |
| INT sfpsL4CDRFlowIndexFlowTblEntryPtr | 1.3.6.1.4.1.52.4.2.4.2.6.2.6.1.5 | INTEGER | read-only | The flow table entry pointer for this flow. |
| INT sfpsL4CDRFlowIndexFlowState | 1.3.6.1.4.1.52.4.2.4.2.6.2.6.1.6 | INTEGER | read-only | Indicates the current state of the flow index record. |
RFC description
Manages Cabletron Layer 4 Smart Switch (L4SS) configuration and monitoring for advanced switching and traffic classification.
Start monitoring Cabletron SecureFast Packet Switch (SFPS), Layer 4 switching services with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.