All MIBs › CPQN5226A-MIB
Category: Vendor: HP/HPE
Description: Supplies port configuration and hardware management objects for the Compaq/HP N5226A network switch.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is CPQN5226A-MIB?
CPQN5226A-MIB is a Compaq (later HP) vendor MIB for the N5226A network switch product, covering hardware and runtime software management for this specific switch model. It exposes a mix of configuration (VT100 console screen refresh, switch mode type, create timeout), software/firmware wear indicators (booter and runtime flash write-cycle counts), and hardware health data including a power supply status table and memory allocation statistics. This gives it clear device-status monitoring value: cpqn52nnPowerSupplyTable/cpqn52nnPsStatus reveals power supply failures, cpqn52nnMemAllocFailure flags memory exhaustion, and the booter/runtime write-cycle counters act as a flash-wear/longevity health indicator for the switch's persistent storage. It is a self-contained Compaq enterprise MIB with no strong dependency on external standard MIBs beyond basic SNMP. It was deployed on Compaq/HP N5226A network switches in enterprise data closets during the late 1990s/early 2000s. Engineers can download the CPQN5226A-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in CPQN5226A-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Compaq/HP N5226A network switch
Monitoring Examples
An operator would poll cpqn52nnPowerSupplyTable/cpqn52nnPowerSupplyEntry keyed by cpqn52nnPsIndex to check cpqn52nnPsStatus for a failed or missing power supply in a redundant-PSU configuration. Watching cpqn52nnMemAllocFailure for a nonzero/incrementing count combined with cpqn52nnMaxMemory would indicate the switch is running low on memory, while a climbing cpqn52nnBooterWriteCycles or cpqn52nnRuntimeWriteCycles count over the device's lifetime signals approaching flash-storage wear limits.
What Can Be Monitored
- power supply status
- memory allocation failures
- flash write-cycle counts (booter/runtime)
- switch mode type configuration
This MIB depends on
Related MIBs
Imported Objects
From CPQNUNIF-MIB
| CpqnRowStatus |
From RFC-1212
| OBJECT-TYPE |
From RFC-1215
| TRAP-TYPE |
From RFC1155-SMI
| Counter | |
| enterprises |
From RFC1213-MIB
| DisplayString | |
| ifIndex |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| compaq | 1.3.6.1.4.1.232 | |||
| compaq_dallas_npd | 1.3.6.1.4.1.232.101 | |||
| NTF cpqb52nnGlobalBcastMemCongestionTrap | 1.3.6.1.4.1.232.101.2.2.0.7 | The SNMP trap that is generated when an alarm entry crosses its rising or falling threshold and generates an event that is configured for sending SNMP traps. | ||
| NTF cpqb52nnPortRxMemCongestionTrap | 1.3.6.1.4.1.232.101.2.2.0.9 | The SNMP trap that is generated when an alarm entry crosses its rising or falling threshold and generates an event that is configured for sending SNMP traps. | ||
| NTF cpqb52nnPortTxPktCongestionTrap | 1.3.6.1.4.1.232.101.2.2.0.8 | The SNMP trap that is generated when an alarm entry crosses its rising or falling threshold and generates an event that is configured for sending SNMP traps. | ||
| cpqn5226 | 1.3.6.1.4.1.232.101.2.2.1.1 | |||
| cpqn5226A | 1.3.6.1.4.1.232.101.2.2.1.3 | |||
| cpqn52nn | 1.3.6.1.4.1.232.101.2.2 | |||
| INT cpqn52nnAlarmMemoryCeiling | 1.3.6.1.4.1.232.101.2.2.3.2.6 | INTEGER | read-write | DURABLE: Kbytes of memory that the RMON alarm group may use. |
| INT cpqn52nnAlarmMemoryUsed | 1.3.6.1.4.1.232.101.2.2.3.2.11 | INTEGER | read-only | Kbytes of memory that the RMON alarm group has used. |
| INT cpqn52nnBcastCongestionStatus | 1.3.6.1.4.1.232.101.2.2.3.3.7 | INTEGER | read-only | Indicator of broadcast packet congestion. When congested, the number of broadcast packets in packet buffer memory has exceeded the rising threshold, but has not gone below the falling threshold. |
| INT cpqn52nnBcastHysteresisCtl | 1.3.6.1.4.1.232.101.2.2.3.3.5 | INTEGER | read-write | DURABLE: Number of packets that when added to the Bcast packet ceiling produces the Rising Threshold value of the maximum number of broadcast packets allowed in packet buffer memory. |
| INT cpqn52nnBcastMemThreshEnable | 1.3.6.1.4.1.232.101.2.2.3.3.3 | INTEGER | read-write | DURABLE: Enable thresholding for the Broadcast packet count. The default value is disabled. |
| INT cpqn52nnBcastPktCeiling | 1.3.6.1.4.1.232.101.2.2.3.3.4 | INTEGER | read-write | DURABLE: Value in 256 packet increments of the falling threshold of the maximum number of broadcast packets allowed in packet buffer memory. |
| INT cpqn52nnBcastPktCnt | 1.3.6.1.4.1.232.101.2.2.3.3.6 | INTEGER | read-only | Indicator of many broadcast packets are actually in packet buffer memory. |
| INT cpqn52nnBondIndex | 1.3.6.1.4.1.232.101.2.2.4.3.1.1 | INTEGER | read-only | A simple index representing the entry number. |
| INT cpqn52nnBondMap | 1.3.6.1.4.1.232.101.2.2.4.3.1.3 | INTEGER | read-write | DURABLE: A bitmap indicating the uplink ports that are bonded together. The bits used to represent the uplink ports are the same as the If Index representations of the ports. e.g. port 25 --> 25th bit. An example is 0x05000000, indicates that uplink ports 25 and 27 are bonded. |
| CPQ cpqn52nnBondRowStatus | 1.3.6.1.4.1.232.101.2.2.4.3.1.2 | CpqnRowStatus | read-write | DURABLE: The status of this row entry. Rows are added to this table using 'row sets'. When a row is added, this object must be set to row-valid(1). To delete a row from this table, set this object for the row to row-invalid(2). This object will always read as row-valid(1). |
| INT cpqn52nnBooterWriteCycles | 1.3.6.1.4.1.232.101.2.2.2.2 | INTEGER | read-only | This object will allow the user to see the number of erase/writes that have been made to the Booter firmware sectors on the FLASH PROM chip. |
| INT cpqn52nnBusMonAction | 1.3.6.1.4.1.232.101.2.2.8.1.1.11 | INTEGER | read-write | DURABLE: If this threshold is exceeded, then the action listed in ThresholdAction will take place. The value is an absolute number in bytes/sec. |
| INT cpqn52nnBusMonBusType | 1.3.6.1.4.1.232.101.2.2.8.1.1.3 | INTEGER | read-write | DURABLE: The type of bus to be monitored. |
| INT cpqn52nnBusMonCurrentUtilization | 1.3.6.1.4.1.232.101.2.2.8.1.1.7 | INTEGER | read-only | Utilization of the selected port calculated as a percentage of the total bandwidth available for the bus. |
| INT cpqn52nnBusMonDataType | 1.3.6.1.4.1.232.101.2.2.8.1.1.4 | INTEGER | read-write | DURABLE: The type of data to be monitored. |
| cpqn52nnBusMonEntry | 1.3.6.1.4.1.232.101.2.2.8.1.1 | not-accessible | This table has one entry for each bus component. The index into the table is cpqn52nnBusMonIndex. | |
| INT cpqn52nnBusMonFallingThreshold | 1.3.6.1.4.1.232.101.2.2.8.1.1.10 | INTEGER | read-write | DURABLE: If this threshold is exceeded, then the action listed in ThresholdAction will take place. The value is a % utilzation. |
| NTF cpqn52nnBusMonFallingThresholdTrap | 1.3.6.1.4.1.232.101.2.2.0.5 | The SNMP trap that is generated when an alarm entry crosses its falling threshold and generates an event that is configured for sending SNMP traps. | ||
| INT cpqn52nnBusMonIndex | 1.3.6.1.4.1.232.101.2.2.8.1.1.1 | INTEGER | read-only | A simple index representing the entry in the table. |
| cpqn52nnBusMonitorInfo | 1.3.6.1.4.1.232.101.2.2.8 | |||
| INT cpqn52nnBusMonPeakUtilization | 1.3.6.1.4.1.232.101.2.2.8.1.1.8 | INTEGER | read-only | Utilization of the selected port calculated as a percentage of the total bandwidth available for the bus. |
| INT cpqn52nnBusMonPktType | 1.3.6.1.4.1.232.101.2.2.8.1.1.5 | INTEGER | read-write | DURABLE: The type of data to be monitored. |
| INT cpqn52nnBusMonRisingThreshold | 1.3.6.1.4.1.232.101.2.2.8.1.1.9 | INTEGER | read-write | DURABLE: If this threshold is exceeded, then the action listed in ThresholdAction will take place. The value is a % utilzation. |
| NTF cpqn52nnBusMonRisingThresholdTrap | 1.3.6.1.4.1.232.101.2.2.0.4 | The SNMP trap that is generated when an alarm entry crosses its rising threshold and generates an event that is configured for sending SNMP traps. | ||
| CPQ cpqn52nnBusMonRowStatus | 1.3.6.1.4.1.232.101.2.2.8.1.1.2 | CpqnRowStatus | read-write | DURABLE: The status of this alarm entry. |
| INT cpqn52nnBusMonSwitchModeType | 1.3.6.1.4.1.232.101.2.2.8.1.1.6 | INTEGER | read-write | DURABLE: The type of packets monitored for data. |
| cpqn52nnBusMonTable | 1.3.6.1.4.1.232.101.2.2.8.1 | not-accessible | This table defines the unit's utilization information. | |
| INT cpqn52nnBusMonTrapEnable | 1.3.6.1.4.1.232.101.2.2.8.1.1.12 | INTEGER | read-write | DURABLE: Enable Trap Generation if threshold is exceeded. |
| INT cpqn52nnCreateTimeout | 1.3.6.1.4.1.232.101.2.2.2.5 | INTEGER | read-write | DURABLE: The minimum number of 5 minute intervals a table entry can have a status of underCreate before the agent may delete the object. The default value will be 1 5 minute interval. |
| cpqn52nnDramEntry | 1.3.6.1.4.1.232.101.2.2.3.4.1.1 | not-accessible | This table has one entry for each Dram component. The index into the table is cpqn52nnDramIndex. | |
| INT cpqn52nnDramIndex | 1.3.6.1.4.1.232.101.2.2.3.4.1.1.1 | INTEGER | read-only | A simple index representing the area using the DRAM. |
| cpqn52nnDramInfo | 1.3.6.1.4.1.232.101.2.2.3.4 | |||
| INT cpqn52nnDramSize | 1.3.6.1.4.1.232.101.2.2.3.4.1.1.2 | INTEGER | read-only | Size of DRAM being used, in KBytes. |
| INT cpqn52nnDramSpeed | 1.3.6.1.4.1.232.101.2.2.3.4.1.1.4 | INTEGER | read-only | Speed of DRAM being used. |
| cpqn52nnDramTable | 1.3.6.1.4.1.232.101.2.2.3.4.1 | not-accessible | This table defines the unit's Dram information. | |
| INT cpqn52nnDramType | 1.3.6.1.4.1.232.101.2.2.3.4.1.1.3 | INTEGER | read-only | Type of DRAM being used. |
| cpqn52nnDropPkts | 1.3.6.1.4.1.232.101.2.2.7.2 | |||
| CTR cpqn52nnDropsBcastMemoryCtr | 1.3.6.1.4.1.232.101.2.2.7.2.2 | Counter | read-only | Counter to indicate the total number of packets dropped due to memory overflow in the area handling Broadcast packets only. This is exclusive of the other counters in this section. |
| CTR cpqn52nnDropsIfMemoryCtr | 1.3.6.1.4.1.232.101.2.2.7.2.3 | Counter | read-only | Counter to indicate the total number of packets dropped due to memory overflow in the area handling interface TX/RX packets only. This is exclusive of the other counters in this section. |
| CTR cpqn52nnDropsWholeMemoryCtr | 1.3.6.1.4.1.232.101.2.2.7.2.1 | Counter | read-only | Counter to indicate the total number of packets dropped due to memory overflow. This is exclusive of the other counters in this section. |
| INT cpqn52nnEventMemoryCeiling | 1.3.6.1.4.1.232.101.2.2.3.2.7 | INTEGER | read-write | DURABLE: Kbytes of memory that the RMON event group may use. |
| INT cpqn52nnEventMemoryUsed | 1.3.6.1.4.1.232.101.2.2.3.2.12 | INTEGER | read-only | Kbytes of memory that the RMON event group has used. |
| INT cpqn52nnGlobalMemThreshTrapEnable | 1.3.6.1.4.1.232.101.2.2.3.3.2 | INTEGER | read-write | DURABLE: Enable Traps for all thresholding entries in the Global Memory group of objects. The default value is disabled. |
| INT cpqn52nnHashChainLength | 1.3.6.1.4.1.232.101.2.2.7.1.4 | INTEGER | read-only | A count of the number of MAC Address entries in the longest chain in the Address Filter/Forward mechanism's hash table. |
| INT cpqn52nnHashChainNum | 1.3.6.1.4.1.232.101.2.2.7.1.3 | INTEGER | read-only | A count of indices in the Address Filter/Forward mechanism's hash table which have more than one MAC Address entry. |
| INT cpqn52nnHashDynamicNum | 1.3.6.1.4.1.232.101.2.2.7.1.2 | INTEGER | read-only | A count of dynamic entries in this switch interface's Address Forwarding/Filtering mechanism. |
| cpqn52nnHashInfo | 1.3.6.1.4.1.232.101.2.2.3.1 | |||
| cpqn52nnHashMemory | 1.3.6.1.4.1.232.101.2.2.7.1 | |||
| INT cpqn52nnHashStaticNum | 1.3.6.1.4.1.232.101.2.2.7.1.1 | INTEGER | read-only | A count of static entries in this switch interface's Address Forwarding/Filtering mechanism. |
| INT cpqn52nnHashTableSize | 1.3.6.1.4.1.232.101.2.2.3.1.1 | INTEGER | read-write | DURABLE: The number of address table entries, in 1024 increments, allowed for the switch. NOTE that a smaller size table will increase the likelihood of broadcasts based on unknown unicasts i.e. addresses that have not been learned. The 5226 and 5226A allows set of 8K only. |
| INT cpqn52nnHistoryMemoryCeiling | 1.3.6.1.4.1.232.101.2.2.3.2.5 | INTEGER | read-write | DURABLE: Kbytes of memory that the RMON history group may use. |
| INT cpqn52nnHistoryMemoryUsed | 1.3.6.1.4.1.232.101.2.2.3.2.10 | INTEGER | read-only | Kbytes of memory that the RMON history group has used. |
| INT cpqn52nnIfAgingStatus | 1.3.6.1.4.1.232.101.2.2.5.1.1.6 | INTEGER | read-write | When enabled(1), this interface ages learned entries in the Address Filter/Forward table. When disabled(2), this interface does not age entries in the address table. Default is enabled(1). DURABLE. |
| INT cpqn52nnIfAgingTime | 1.3.6.1.4.1.232.101.2.2.5.1.1.7 | INTEGER | read-write | The timeout period in seconds for aging out dynamically learned forwarding information on the switch interface. DURABLE |
| INT cpqn52nnIfArbPriority | 1.3.6.1.4.1.232.101.2.2.5.1.1.12 | INTEGER | read-write | DURABLE: The priority mechanism used for arbitration. The possible arbitration states and values are as follows: VALUE ARBITRATION ----- ----------- 0 First-Come-First-Served all port same Round Robin (Fair) all ports varied Round Robin (Weighted) The final case implies that not all ports have the same priority in which case a weighted Round Robin method of arbitration would be used. The default case has all ports with a value of 0 (First-Come-First-Served). |
| INT cpqn52nnIfLearningStatus | 1.3.6.1.4.1.232.101.2.2.5.1.1.5 | INTEGER | read-write | When enabled(1), this interface can enter the learning state. When disabled(2), this interface is not allowed to enter the learning state. When disabled(2), Spanning Tree must be set to disabled. Default is enabled(1). DURABLE. |
| INT cpqn52nnIfResetStatus | 1.3.6.1.4.1.232.101.2.2.5.1.1.4 | INTEGER | read-write | This object will allow the user to physically reset an interface on the CPQN52nn. The advantage over a general reset is that the other interfaces are left unaffected in their operation. The agent will always return interface-not-resetting(1) when the object is read. |
| cpqn52nnIfStatsInfo | 1.3.6.1.4.1.232.101.2.2.6 | |||
| cpqn52nnIfStatusEntry | 1.3.6.1.4.1.232.101.2.2.5.1.1 | not-accessible | This table has one entry for each switch interface. The index into the table is cpqn52nnIfStatusIfIndex. | |
| INT cpqn52nnIfStatusIfIndex | 1.3.6.1.4.1.232.101.2.2.5.1.1.1 | INTEGER | read-only | The value of the instance of the ifIndex object, defined in MIB-II, for this switch interface. |
| INT cpqn52nnIfStatusIfType | 1.3.6.1.4.1.232.101.2.2.5.1.1.2 | INTEGER | read-only | The type of device used for this switch interface. |
| cpqn52nnIfStatusInfo | 1.3.6.1.4.1.232.101.2.2.5 | |||
| cpqn52nnIfStatusTable | 1.3.6.1.4.1.232.101.2.2.5.1 | not-accessible | This table defines certain switch interface level parameters for each interface. | |
| INT cpqn52nnIfStpStatus | 1.3.6.1.4.1.232.101.2.2.5.1.1.3 | INTEGER | read-write | When enabled(1), this interface will participate in Spanning Tree activities. When disabled(2), this interface will not participate in the Spanning Tree algorithm. Default is enabled(1). DURABLE. |
| INT cpqn52nnIfSwitchModeDest | 1.3.6.1.4.1.232.101.2.2.5.1.1.11 | INTEGER | read-write | DURABLE: The switch mode for this interface when it is the Destination in a switch transfer. The default case is store-and-forward(1). |
| INT cpqn52nnIfSwitchModeDestStatus | 1.3.6.1.4.1.232.101.2.2.5.1.1.9 | INTEGER | read-only | The switch mode for this interface when it is the Destination in a switch transfer. |
| INT cpqn52nnIfSwitchModeSrc | 1.3.6.1.4.1.232.101.2.2.5.1.1.10 | INTEGER | read-write | DURABLE: The switch mode for this interface when it is the Source in a switch transfer. The default case is store-and-forward(1). |
| INT cpqn52nnIfSwitchModeSrcStatus | 1.3.6.1.4.1.232.101.2.2.5.1.1.8 | INTEGER | read-only | The switch mode for this interface when it is the Source in a switch transfer. |
| INT cpqn52nnMaxMemory | 1.3.6.1.4.1.232.101.2.2.3.2.1 | INTEGER | read-only | Kbytes of memory that can be used for RMON. Actually this number does not include some overhead needed to support the software. This number should be set in the implementation of the agent to assure that memory is always available for the overhead. |
| INT cpqn52nnMaxPktMemory | 1.3.6.1.4.1.232.101.2.2.3.3.1 | INTEGER | read-only | Kbytes of memory that can be used for Packet Memory. |
| INT cpqn52nnMdiMdixEnable | 1.3.6.1.4.1.232.101.2.2.4.1.1.6 | INTEGER | read-write | This object identifies all possible port types. |
| INT cpqn52nnMdiMdixStatus | 1.3.6.1.4.1.232.101.2.2.4.1.1.5 | INTEGER | read-only | This object identifies all possible port types. |
| INT cpqn52nnMemAllocFailure | 1.3.6.1.4.1.232.101.2.2.3.2.2 | INTEGER | read-only | The time of the last memory allocation failure that resulted from no more physical memory available in the agent. This value is in seconds |
| cpqn52nnMemoryInfo | 1.3.6.1.4.1.232.101.2.2.3 | |||
| cpqn52nnMemoryThreshold | 1.3.6.1.4.1.232.101.2.2.3.3 | |||
| cpqn52nnModuleInfo | 1.3.6.1.4.1.232.101.2.2.2 | |||
| cpqn52nnOIDInfo | 1.3.6.1.4.1.232.101.2.2.1 | |||
| cpqn52nnPortBondingEntry | 1.3.6.1.4.1.232.101.2.2.4.3.1 | not-accessible | The index into the table is cpqn52nnBondIndex. The table can be empty. | |
| cpqn52nnPortBondingTable | 1.3.6.1.4.1.232.101.2.2.4.3 | not-accessible | This table defines uplink bonding information. | |
| INT cpqn52nnPortCongestionTrapEnable | 1.3.6.1.4.1.232.101.2.2.3.3.8.1.12 | INTEGER | read-write | DURABLE: Enables or disabled traps due to congestion states for any Port. |
| INT cpqn52nnPortIfIndex | 1.3.6.1.4.1.232.101.2.2.4.1.1.1 | INTEGER | read-only | Switch interface number that corresponds to the interface in MIB-II. |
| INT cpqn52nnPortIfMauIndex | 1.3.6.1.4.1.232.101.2.2.4.1.1.2 | INTEGER | read-only | Uniquely identifies the port in the CPQN52nn unit for which additional info is being obtained. |
| cpqn52nnPortInfo | 1.3.6.1.4.1.232.101.2.2.4 | |||
| cpqn52nnPortMemThreshEntry | 1.3.6.1.4.1.232.101.2.2.3.3.8.1 | not-accessible | This table has one entry for each port. The index into the table is cpqn52nnPortThreshIfIndex. | |
| cpqn52nnPortMemThreshTable | 1.3.6.1.4.1.232.101.2.2.3.3.8 | not-accessible | This table defines something. | |
| INT cpqn52nnPortMonitoredDataType | 1.3.6.1.4.1.232.101.2.2.4.2.1.5 | INTEGER | read-write | DURABLE: The type of data to be monitored by the monitor port. Selecting TX or RX means that only the TX or RX data will be monitored by the monitor port. |
| INT cpqn52nnPortMonitoredIfMap | 1.3.6.1.4.1.232.101.2.2.4.2.1.4 | INTEGER | read-write | DURABLE: A bitmap indicating the ports whose data is being monitored. The bits used to represent the are the same as the IfIndex representation of the ports. e.g. port 25 --> 25th bit. An example is 0x00000003, indicates that ports 1 and 3 are being monitored. The port doing the monitoring is defined by cpqn52nnPortMonitorIfIndex for this row in the table. |
| cpqn52nnPortMonitorEntry | 1.3.6.1.4.1.232.101.2.2.4.2.1 | not-accessible | This table can be empty. Entries can be added as needed. The index into the table is cpqn52nnPortMonitorIndex. | |
| INT cpqn52nnPortMonitorIfIndex | 1.3.6.1.4.1.232.101.2.2.4.2.1.3 | INTEGER | read-write | DURABLE An index based on the interface index in MIB-II. This will represent the interface to be used to monitor the data of others as defined by cpqn52nnPortMonitoredIfMap. |
| INT cpqn52nnPortMonitorIndex | 1.3.6.1.4.1.232.101.2.2.4.2.1.1 | INTEGER | read-only | A simple index represnting the number of the entry being examined. |
| CPQ cpqn52nnPortMonitorRowStatus | 1.3.6.1.4.1.232.101.2.2.4.2.1.2 | CpqnRowStatus | read-write | DURABLE: The status of this row entry. Rows are added to this table using 'row sets'. When a row is added, this object must be set to row-valid(1). To delete a row from this table, set this object for the row to row-invalid(2). This object will always read as row-valid(1). |
| cpqn52nnPortMonitorTable | 1.3.6.1.4.1.232.101.2.2.4.2 | not-accessible | This table defines monitor information. | |
| STR cpqn52nnPortName | 1.3.6.1.4.1.232.101.2.2.4.1.1.3 | DisplayString | read-write | DURABLE: User defined name for port. |
| INT cpqn52nnPortRxMemCeiling | 1.3.6.1.4.1.232.101.2.2.3.3.8.1.10 | INTEGER | read-write | DURABLE: Value in 32Kbyte increments of the falling threshold of the maximum receive packet memory allowed for the port in packet buffer memory. |
| INT cpqn52nnPortRxMemCongestionStatus | 1.3.6.1.4.1.232.101.2.2.3.3.8.1.8 | INTEGER | read-only | Indicator of port receive memory congestion. When congested, the amount of receive packet buffer memory used by the port has exceeded the rising threshold, but has not gone below the falling threshold. |
| INT cpqn52nnPortRxMemHysteresisCtl | 1.3.6.1.4.1.232.101.2.2.3.3.8.1.11 | INTEGER | read-write | DURABLE: Value in 2Kbyte increments that when added to the port's receive memory ceiling produces the Rising Threshold value of the maximum receive memory allowed for the port in packet buffer memory. |
| INT cpqn52nnPortRxMemSectorCnt | 1.3.6.1.4.1.232.101.2.2.3.3.8.1.9 | INTEGER | read-only | Indicator of how amount Packet Receive memory, in 2Kbyte increments, is actually being used by the port. |
| INT cpqn52nnPortRxMemThreshEnable | 1.3.6.1.4.1.232.101.2.2.3.3.8.1.7 | INTEGER | read-write | DURABLE: Enables or disables receive memory thresholding on a per port basis. |
| cpqn52nnPortStatusEntry | 1.3.6.1.4.1.232.101.2.2.4.1.1 | not-accessible | This table has one entry for each port. The index into the table is cpqn52nnPortStatusId. | |
| cpqn52nnPortStatusTable | 1.3.6.1.4.1.232.101.2.2.4.1 | not-accessible | This table defines certain Port Level parameters for each port. | |
| INT cpqn52nnPortThreshIfIndex | 1.3.6.1.4.1.232.101.2.2.3.3.8.1.1 | INTEGER | read-only | The Interface Index as represented in MIB-II. |
| INT cpqn52nnPortTxPktCeiling | 1.3.6.1.4.1.232.101.2.2.3.3.8.1.5 | INTEGER | read-write | DURABLE: Value in 256 packet increments of the falling threshold of the maximum number of transmit packets allowed for the port in packet buffer memory. |
| INT cpqn52nnPortTxPktCnt | 1.3.6.1.4.1.232.101.2.2.3.3.8.1.4 | INTEGER | read-only | Indicator of how many transmit packets for the port are actually in packet buffer memory. |
| INT cpqn52nnPortTxPktCongestionStatus | 1.3.6.1.4.1.232.101.2.2.3.3.8.1.3 | INTEGER | read-only | Indicator of port transmit packet congestion. When congested, the number of transmit packets in packet buffer memory for the port has exceeded the rising threshold, but has not gone below the falling threshold. |
| INT cpqn52nnPortTxPktHysteresisCtl | 1.3.6.1.4.1.232.101.2.2.3.3.8.1.6 | INTEGER | read-write | DURABLE: Number of packets that when added to the port's transmit packet ceiling produces the Rising Threshold value of the maximum number of transmit packets allowed for the port in packet buffer memory. |
| INT cpqn52nnPortTxPktThreshEnable | 1.3.6.1.4.1.232.101.2.2.3.3.8.1.2 | INTEGER | read-write | DURABLE: Enables or disabled transmit packet thresholding on a per port basis. |
| INT cpqn52nnPortType | 1.3.6.1.4.1.232.101.2.2.4.1.1.4 | INTEGER | read-only | This object identifies all possible port types. Note that unknown Port Types are represented by the value 1000. |
| cpqn52nnPowerSupplyEntry | 1.3.6.1.4.1.232.101.2.2.2.6.1 | not-accessible | A list of information for every power supply installed | |
| NTF cpqn52nnPowerSupplyStatusTrap | 1.3.6.1.4.1.232.101.2.2.0.1 | A cpqn52nnPowerSupplyStatus Trap is sent whenever a power supply changes state from voltage-ok to voltage-not-ok or vice versa. | ||
| cpqn52nnPowerSupplyTable | 1.3.6.1.4.1.232.101.2.2.2.6 | not-accessible | A table of system power supply specific information. | |
| INT cpqn52nnPsIndex | 1.3.6.1.4.1.232.101.2.2.2.6.1.1 | INTEGER | read-only | A unique value for each power supply. |
| INT cpqn52nnPsStatus | 1.3.6.1.4.1.232.101.2.2.2.6.1.2 | INTEGER | read-only | The status of the power supply. The value good(1) is returned if the power supply identified by cpqn52nnPSIndex is running properly. The value bad(2) is returned if the power supply identified by cpqn52nnPSIndex has failed to operate properly but has been inserted into the slot. This will include an inserted power supply with no power. The value na(3) is returned if the power supply has not been inserted into the slot. |
| cpqn52nnQuadCascade | 1.3.6.1.4.1.232.101.2.2.6.1 | |||
| CTR cpqn52nnQuadIfAlignFcsErrors | 1.3.6.1.4.1.232.101.2.2.6.1.1.1.2 | Counter | read-only | Shows the number of packets received between 64 and 1518 bytes in length, but were not an integral number of bytes in length, or had a bad Frame Check Sequence. |
| cpqn52nnQuadIfCfgEntry | 1.3.6.1.4.1.232.101.2.2.6.1.2.1 | not-accessible | This table has one entry for each Port. The index into the table is cpqn52nnQuadIfIndex. | |
| INT cpqn52nnQuadIfCfgIndex | 1.3.6.1.4.1.232.101.2.2.6.1.2.1.1 | INTEGER | read-only | An index representing the interface as in MIN-II. |
| INT cpqn52nnQuadIfCfgLinkForce | 1.3.6.1.4.1.232.101.2.2.6.1.2.1.3 | INTEGER | read-write | DURABLE: When enabled, this object allows the port to transmit even if link integrity fails. |
| INT cpqn52nnQuadIfCfgLinkPolarityCorrect | 1.3.6.1.4.1.232.101.2.2.6.1.2.1.4 | INTEGER | read-write | DURABLE: When enabled, this allows the port to correct for inverted polarity on the twisted pair interface, if an inverted polarity condition exists on that port. |
| INT cpqn52nnQuadIfCfgMauIndex | 1.3.6.1.4.1.232.101.2.2.6.1.2.1.2 | INTEGER | read-only | |
| cpqn52nnQuadIfCfgTable | 1.3.6.1.4.1.232.101.2.2.6.1.2 | not-accessible | This table provides information, on a per port basis, for the Quad Cascade devices. | |
| cpqn52nnQuadIfEntry | 1.3.6.1.4.1.232.101.2.2.6.1.1.1 | not-accessible | This table has one entry for each Port. The indices into the table are cpqn52nnQuadIfIndex. | |
| INT cpqn52nnQuadIfIndex | 1.3.6.1.4.1.232.101.2.2.6.1.1.1.1 | INTEGER | read-only | An index representing the interface as in MIN-II. |
| CTR cpqn52nnQuadIfRxRunts | 1.3.6.1.4.1.232.101.2.2.6.1.1.1.4 | Counter | read-only | Shows the number of packets received that were less than 64 bytes long that were an integral number of bytes long. |
| cpqn52nnQuadIfTable | 1.3.6.1.4.1.232.101.2.2.6.1.1 | not-accessible | This table provides information, on a per port basis, for the Quad Cascade devices. | |
| CTR cpqn52nnQuadIfTotalCollisions | 1.3.6.1.4.1.232.101.2.2.6.1.1.1.5 | Counter | read-only | Shows the number of collision packets, single and multiple. |
| CTR cpqn52nnQuadIfTxRunts | 1.3.6.1.4.1.232.101.2.2.6.1.1.1.3 | Counter | read-only | Shows the number of packets transmitted that were less than 64 bytes in length. |
| cpqn52nnRmonMemory | 1.3.6.1.4.1.232.101.2.2.3.2 | |||
| INT cpqn52nnRmonMemoryCeiling | 1.3.6.1.4.1.232.101.2.2.3.2.3 | INTEGER | read-write | DURABLE: Kbytes of memory RMON code may use, not counting any overhead. |
| INT cpqn52nnRmonMemoryUsed | 1.3.6.1.4.1.232.101.2.2.3.2.8 | INTEGER | read-only | Kbytes of memory used by RMON, rounded up. |
| INT cpqn52nnRuntimeWriteCycles | 1.3.6.1.4.1.232.101.2.2.2.3 | INTEGER | read-only | This object will allow the user to see the number of erase/writes that have been made to the Runtime firmware sectors on the FLASH PROM chip. |
| INT cpqn52nnStatisticsMemoryCeiling | 1.3.6.1.4.1.232.101.2.2.3.2.4 | INTEGER | read-write | DURABLE: Kbytes of memory that the RMON statistics group may use. |
| INT cpqn52nnStatisticsMemoryUsed | 1.3.6.1.4.1.232.101.2.2.3.2.9 | INTEGER | read-only | Kbytes of memory that the RMON statistics group has used. |
| INT cpqn52nnSwitchModeType | 1.3.6.1.4.1.232.101.2.2.2.4 | INTEGER | read-write | DURABLE: This object will determine the operational mode of the switch. The default will be store-and-forward(1). Fragment-free is not supported on 5226 nor 5226A. |
| cpqn52nnSwitchStatsInfo | 1.3.6.1.4.1.232.101.2.2.7 | |||
| cpqn52nnTlan | 1.3.6.1.4.1.232.101.2.2.6.2 | |||
| cpqn52nnTlanIfEntry | 1.3.6.1.4.1.232.101.2.2.6.2.1.1 | not-accessible | This table has one entry for each Port. The index into the table is cpqn52nnTlanIfIndex. | |
| INT cpqn52nnTlanIfIndex | 1.3.6.1.4.1.232.101.2.2.6.2.1.1.1 | INTEGER | read-only | A simple index representing the Port in the table representing the IfIndex in MIB-II. |
| CTR cpqn52nnTlanIfRxAlignSymbolErrs | 1.3.6.1.4.1.232.101.2.2.6.2.1.1.5 | Counter | read-only | Shows the number of packets received that had either Alignment errors or Symbol errors. |
| CTR cpqn52nnTlanIfRxOverruns | 1.3.6.1.4.1.232.101.2.2.6.2.1.1.4 | Counter | read-only | Shows the number of packets received that were |
| CTR cpqn52nnTlanIfRxUndersizeFrms | 1.3.6.1.4.1.232.101.2.2.6.2.1.1.3 | Counter | read-only | Shows the number of packets that were |
| cpqn52nnTlanIfTable | 1.3.6.1.4.1.232.101.2.2.6.2.1 | not-accessible | This table provides information, on a per port basis, for the Tlan devices. | |
| CTR cpqn52nnTlanIfTxGoodFrms | 1.3.6.1.4.1.232.101.2.2.6.2.1.1.2 | Counter | read-only | Shows the number of packets transmitted that were good (no errors). |
| NTF cpqn52nnUplinkInsertedTrap | 1.3.6.1.4.1.232.101.2.2.0.2 | The cpqn52nnMepInserted trap is sent whenever a MEP, that represents a physical interface, is added. | ||
| NTF cpqn52nnUplinkRemovedTrap | 1.3.6.1.4.1.232.101.2.2.0.3 | The cpqn52nnMepRemoved trap is sent whenever a MEP, that represents a physical interface, is removed. | ||
| INT cpqn52nnVT100ScreenRefresh | 1.3.6.1.4.1.232.101.2.2.2.1 | INTEGER | read-write | DURABLE: This object will determine the rate, in seconds, at which the VT100 screen will refresh the automatic fields (e.g., statistics). The default value will be 5 seconds. |
| switchedMedia | 1.3.6.1.4.1.232.101.2 |
RFC description
Provides management objects for the Compaq/HP N5226A network switch hardware and port configuration.
Start monitoring Compaq/HP N5226A network switch (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.