All MIBs › CPQN5226A-MIB › cpqn52nnPsStatus
cpqn52nnPsStatus
Module: CPQN5226A-MIB
OID (symbolic): CPQN5226A-MIB::cpqn52nnPsStatus
OID (numeric): 1.3.6.1.4.1.232.101.2.2.2.6.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The status of the power supply. The value good(1) is returned if the power supply identified by cpqn52nnPSIndex is running properly. The value bad(2) is returned if the power supply identified by cpqn52nnPSIndex has failed to operate properly but has been inserted into the slot. This will include an inserted power supply with no power. The value na(3) is returned if the power supply has not been inserted into the slot.
What is cpqn52nnPsStatus?
This read-only enumeration (good, bad, not-present) reports the status of the power supply identified by cpqn52nnPsIndex, where bad(2) means the supply is inserted but not operating properly (including being inserted with no power) and not-present(3) means no supply is in that slot. An admin relies on this for hardware health alerting on redundant power supplies in the switch chassis. For example, seeing power-supply-a report bad(2) while power-supply-b reports good(1) would tell an admin the switch is still powered but has lost its redundancy and needs the failed unit replaced.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.232.101.2.2.2.6.1.2 snmpwalk -v2c -c public <target> CPQN5226A-MIB::cpqn52nnPsStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.232.101.2.2.2.6.1.2.1 snmpget -v2c -c public <target> CPQN5226A-MIB::cpqn52nnPsStatus.1
Start monitoring Compaq/HP N5226A network switch (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CPQN5226A-MIB::cpqn52nnPsStatus OID value, configure state conditions and alerts, and monitor any Compaq/HP N5226A network switch (legacy) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.232 | compaq | COMPAQ-ID-REC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.232.101 | compaq_dallas_npd | CPQN5226A-MIB |
| 1.3.6.1.4.1.232.101.2 | switchedMedia | CPQN5226A-MIB |
| 1.3.6.1.4.1.232.101.2.2 | cpqn52nn | CPQN5226A-MIB |
| 1.3.6.1.4.1.232.101.2.2.2 | cpqn52nnModuleInfo | CPQN5226A-MIB |
| 1.3.6.1.4.1.232.101.2.2.2.6 | cpqn52nnPowerSupplyTable | CPQN5226A-MIB |
| 1.3.6.1.4.1.232.101.2.2.2.6.1 | cpqn52nnPowerSupplyEntry | CPQN5226A-MIB |
| 1.3.6.1.4.1.232.101.2.2.2.6.1.2 | cpqn52nnPsStatus | CPQN5226A-MIB |