HPN-ICF-VMAP-MIB

All MIBs › HPN-ICF-VMAP-MIB

Last Updated: 2013-03-08

Category: Technology: VLAN, Vendor: H3C/HH3C, Vendor: HP/HPE

Description: Manages VLAN mapping (VMAP) policies for translating or aggregating VLAN tags on HP/Comware switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HPN-ICF-VMAP-MIB?

HPN-ICF-VMAP-MIB, based on the H3C/HP Comware 802.1 VLAN Mapping specification, manages VLAN mapping (VMAP) policies that translate customer VLAN tags to service-provider VLAN tags (1-to-1 mapping) or aggregate multiple customer VLANs into one (N-to-1 range mapping) at network-to-network interfaces (NNI). It exposes configuration tables for NNI port state, 1-to-1 VLAN translation pairs, and N-to-1 VLAN range mappings. This is primarily a configuration/policy MIB used to confirm that VLAN translation rules are correctly provisioned and active, giving visibility into the software-configured state of a switch's VLAN tag-swapping logic rather than hardware sensors. It builds on the standard VLAN/bridge MIBs (e.g., Q-BRIDGE-MIB) since it operates on VLAN IDs defined there. It is typically deployed on HP/H3C Comware carrier-Ethernet or metro-access switches providing VLAN translation services for multiple customers over a shared provider network, where HPN-ICF-VMAP-MIB SNMP monitoring verifies each customer's VLAN mapping rules stay correctly provisioned.

IPNetwork Monitor allows you to monitor SNMP objects defined in HPN-ICF-VMAP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

HP/H3C Comware carrier-Ethernet/metro-access switches

Monitoring Examples

A provisioning check would walk hpnicfVMAP1to1Table, verifying that hpnicfVMAP1to1Vlan correctly maps to hpnicfVMAP1to1TranslatedVlan and that hpnicfVMAP1to1RowStatus shows the entry as active for a given customer circuit. For aggregated customers, hpnicfVMAPNto1RangeTable is checked to confirm hpnicfVMAPNto1StartVlan through hpnicfVMAPNto1EndVlan spans the intended VLAN range. Meanwhile hpnicfVMAPNNIState in hpnicfVMAPNNITable is polled to confirm the network-to-network interface port is enabled for VLAN mapping, and an unexpected disabled state would explain why customer VLAN tags aren't being translated.

What Can Be Monitored

NNI port VLAN-mapping enable state
1-to-1 VLAN translation pairs
N-to-1 VLAN range aggregation
VLAN mapping row/configuration status

Imported Objects

From HPN-ICF-OID-MIB

hpnicfCommon

OBJECT-IDENTITY

From IF-MIB

ifIndex

OBJECT-TYPE

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

RowStatus
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
hpnicfVmap	1.3.6.1.4.1.11.2.14.11.15.2.138			H3C 802.1 VLAN Mapping MIB Version
hpnicfVMAPNNITable	1.3.6.1.4.1.11.2.14.11.15.2.138.1		not-accessible	VLAN mapping NNI table.
hpnicfVMAPNNIEntry	1.3.6.1.4.1.11.2.14.11.15.2.138.1.1		not-accessible	VLAN mapping NNI table entries.
T/F hpnicfVMAPNNIState	1.3.6.1.4.1.11.2.14.11.15.2.138.1.1.1	TruthValue	read-write	Set the network-side interface for a many-to-one VLAN mapping.
hpnicfVMAP1to1Table	1.3.6.1.4.1.11.2.14.11.15.2.138.2		not-accessible	One-to-one VLAN mapping table.
hpnicfVMAP1to1Entry	1.3.6.1.4.1.11.2.14.11.15.2.138.2.1		not-accessible	One-to-one VLAN mapping table entries.
I32 hpnicfVMAP1to1Vlan	1.3.6.1.4.1.11.2.14.11.15.2.138.2.1.1	Integer32	not-accessible	The original VLAN for a one-to-one VLAN mapping on the port.
I32 hpnicfVMAP1to1TranslatedVlan	1.3.6.1.4.1.11.2.14.11.15.2.138.2.1.2	Integer32	read-create	The translated VLAN for a one-to-one VLAN mapping on the port.
ROW hpnicfVMAP1to1RowStatus	1.3.6.1.4.1.11.2.14.11.15.2.138.2.1.3	RowStatus	read-create	Operation status of this table entry.
hpnicfVMAPNto1RangeTable	1.3.6.1.4.1.11.2.14.11.15.2.138.3		not-accessible	Many-to-one VLAN mapping table. The original VLANs of each entry should be a range of VLANs (for example, VLAN 20 to 30).
hpnicfVMAPNto1RangeEntry	1.3.6.1.4.1.11.2.14.11.15.2.138.3.1		not-accessible	Many-to-one VLAN mapping table entries. The original VLANs of each entry should be a range of VLANs (for example, VLAN 20 to 30).
I32 hpnicfVMAPNto1StartVlan	1.3.6.1.4.1.11.2.14.11.15.2.138.3.1.1	Integer32	not-accessible	The original start VLAN for a many-to-one VLAN mapping on the port.
I32 hpnicfVMAPNto1EndVlan	1.3.6.1.4.1.11.2.14.11.15.2.138.3.1.2	Integer32	read-create	The original end VLAN for a many-to-one VLAN mapping on the port.
I32 hpnicfVMAPNto1RangeTranslatedVlan	1.3.6.1.4.1.11.2.14.11.15.2.138.3.1.3	Integer32	read-create	The translated VLAN for a many-to-one VLAN mapping on the port.
ROW hpnicfVMAPNto1RangeRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.138.3.1.4	RowStatus	read-create	Operation status of this table entry.
hpnicfVMAPNto1SingleTable	1.3.6.1.4.1.11.2.14.11.15.2.138.4		not-accessible	Many-to-one VLAN mapping table. The original VLANs of each entry should be a group of VLANs listed one by one (for example, VLAN 30, 31, 32).
hpnicfVMAPNto1SingleEntry	1.3.6.1.4.1.11.2.14.11.15.2.138.4.1		not-accessible	Many-to-one VLAN mapping table entries. The original VLANs of each entry should be a group of VLANs listed one by one (for example, VLAN 30, 31, 32).
I32 hpnicfVMAPNto1Vlan	1.3.6.1.4.1.11.2.14.11.15.2.138.4.1.1	Integer32	not-accessible	The original VLANs for a many-to-one VLAN mapping on the port.
I32 hpnicfVMAPNto1SingleTranslatedVlan	1.3.6.1.4.1.11.2.14.11.15.2.138.4.1.2	Integer32	read-create	The translated VLAN for a many-to-one VLAN mapping on the port.
ROW hpnicfVMAPNto1SingleRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.138.4.1.3	RowStatus	read-create	Operation status of this table entry.
hpnicfVMAP1to2RangeTable	1.3.6.1.4.1.11.2.14.11.15.2.138.5		not-accessible	One-to-two VLAN mapping table. The original VLANs of each entry should be a range of VLANs (for example, VLAN 20 to 30).
hpnicfVMAP1to2RangeEntry	1.3.6.1.4.1.11.2.14.11.15.2.138.5.1		not-accessible	One-to-two VLAN mapping table entries. The original VLANs of each entry should be a range of VLANs (for example, VLAN 20 to 30).
I32 hpnicfVMAP1to2StartVlan	1.3.6.1.4.1.11.2.14.11.15.2.138.5.1.1	Integer32	not-accessible	The original start VLAN for a one-to-two VLAN mapping on the port.
I32 hpnicfVMAP1to2EndVlan	1.3.6.1.4.1.11.2.14.11.15.2.138.5.1.2	Integer32	read-create	The original end VLAN for a one-to-two VLAN mapping on the port.
I32 hpnicfVMAP1to2RangeNestedVlan	1.3.6.1.4.1.11.2.14.11.15.2.138.5.1.3	Integer32	read-create	The outer VLAN for a one-to-two VLAN mapping on the port.
ROW hpnicfVMAP1to2RangeRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.138.5.1.4	RowStatus	read-create	Operation status of this table entry.
hpnicfVMAP1to2SingleTable	1.3.6.1.4.1.11.2.14.11.15.2.138.6		not-accessible	One-to-two VLAN mapping table. The original VLANs of each entry should be a group of VLANs listed one by one (for example, VLAN 30, 31, 32).
hpnicfVMAP1to2SingleEntry	1.3.6.1.4.1.11.2.14.11.15.2.138.6.1		not-accessible	One-to-two VLAN mapping table entries. The original VLANs of each entry should be a group of VLANs listed one by one (for example, VLAN 30, 31, 32).
I32 hpnicfVMAP1to2Vlan	1.3.6.1.4.1.11.2.14.11.15.2.138.6.1.1	Integer32	not-accessible	The original VLANs for a one-to-two VLAN mapping on the port.
I32 hpnicfVMAP1to2SingleNestedVlan	1.3.6.1.4.1.11.2.14.11.15.2.138.6.1.2	Integer32	read-create	The outer VLAN for a one-to-two VLAN mapping on the port.
ROW hpnicfVMAP1to2SingleRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.138.6.1.3	RowStatus	read-create	Operation status of this table entry.
hpnicfVMAP2to2Table	1.3.6.1.4.1.11.2.14.11.15.2.138.7		not-accessible	Two-to-two VLAN mapping table.
hpnicfVMAP2to2Entry	1.3.6.1.4.1.11.2.14.11.15.2.138.7.1		not-accessible	Two-to-two VLAN mapping table entries.
I32 hpnicfVMAP2to2OuterVlan	1.3.6.1.4.1.11.2.14.11.15.2.138.7.1.1	Integer32	not-accessible	The original outer VLAN for a two-to-two VLAN mapping on the port.
I32 hpnicfVMAP2to2InnerVlan	1.3.6.1.4.1.11.2.14.11.15.2.138.7.1.2	Integer32	not-accessible	The original inner VLAN for a two-to-two VLAN mapping on the port.
I32 hpnicfVMAP2to2TranslatedOuterVlan	1.3.6.1.4.1.11.2.14.11.15.2.138.7.1.3	Integer32	read-create	The translated outer VLAN for a two-to-two VLAN mapping on the port.
I32 hpnicfVMAP2to2TranslatedInnerVlan	1.3.6.1.4.1.11.2.14.11.15.2.138.7.1.4	Integer32	read-create	The translated inner VLAN for a two-to-two VLAN mapping on the port.
ROW hpnicfVMAP2to2RowStatus	1.3.6.1.4.1.11.2.14.11.15.2.138.7.1.5	RowStatus	read-create	Operation status of this table entry.

RFC description

Manages 802.1 VLAN mapping configuration for H3C network devices.

Start monitoring HP/H3C Comware switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HPN-ICF-VMAP-MIB

What Is HPN-ICF-VMAP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description