All MIBs › CPQ-TRAPS-MIB
Category: Alarm and Event Management, Hardware and Environment, Vendor: HP/HPE
Description: Defines SNMP trap notifications for Compaq/HP ProLiant server hardware faults and alerts.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is CPQ-TRAPS-MIB?
CPQ-TRAPS-MIB is a Compaq/HP ProLiant server-management MIB that defines the SNMP trap (notification) objects used across the Compaq Insight Manager hardware-health MIB family to signal ProLiant server hardware faults and alerts. It belongs to the server hardware fault/alert-notification category, acting as a common trap-definition module referenced by other CPQ* MIBs, such as CPQUPS-MIB and CPQSASSWITCH-MIB. Its monitoring value is fault-oriented: it is the vehicle for reporting hardware problems such as temperature threshold exceeded, fan failure, power supply failure, disk/array degradation, or ECC memory errors, letting an NMS receive near-real-time alerts rather than only relying on polling. As a trap-definition module it depends heavily on the broader Compaq/HP Insight Manager MIB suite for the underlying condition objects that trigger each trap. It is deployed on HP (Compaq) ProLiant servers throughout enterprise data centers, monitored by HP Systems Insight Manager or any general-purpose SNMP trap receiver/NMS. Engineers can download the CPQ-TRAPS-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in CPQ-TRAPS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- HP (Compaq) ProLiant servers
Monitoring Examples
No module description or sample object list is available for this entry, so exact trap object names cannot be confirmed. Based on its documented purpose, a monitoring system would subscribe to receive these traps so that, for instance, a fan-failure or over-temperature trap firing immediately alerts an operator to a cooling problem before it causes a thermal shutdown, without waiting for the next poll cycle, but no concrete OIDs are available for this entry.
What Can Be Monitored
- hardware fault/alert notifications (temperature, fan, power supply, disk/array, memory errors)
Imported Objects
From COMPAQ-AGENT-MIB
| agentBscSwFile | OBJECT-TYPE |
| agentBscSwFileAddr | OBJECT-TYPE |
| agentBscSwFileLoadType | OBJECT-TYPE |
| agentBscSwFileStatus | OBJECT-TYPE |
| agentSNTPServer1IPAddr | OBJECT-TYPE |
| agentSNTPServer2IPAddr | OBJECT-TYPE |
| agentSwitchCubeSpareName | OBJECT-TYPE |
| agentSwitchCubeSparePartNumber | OBJECT-TYPE |
| agentSwitchCubeType | OBJECT-TYPE |
| agentSwitchFanCondition | OBJECT-TYPE |
| agentSwitchFanIndex | OBJECT-TYPE |
| agentSwitchPowerSupplyCondition | OBJECT-TYPE |
| agentSwitchPowerSupplyCurPwrOutput | OBJECT-TYPE |
| agentSwitchPowerSupplyExhaustTemp | OBJECT-TYPE |
| agentSwitchPowerSupplyInputLineStatus | OBJECT-TYPE |
| agentSwitchPowerSupplyIntakeTemp | OBJECT-TYPE |
| agentSwitchPowerSupplyMaxPwrOutput | OBJECT-TYPE |
| agentSwitchPowerSupplyStatus | OBJECT-TYPE |
| agentSwitchTempSensorCondition | OBJECT-TYPE |
| agentSwitchTempSensorCurrent | OBJECT-TYPE |
| agentSwitchTempSensorIndex | OBJECT-TYPE |
| agentSwitchTempSensorTempType | OBJECT-TYPE |
| agentSwitchTempSensorThreshold | OBJECT-TYPE |
From COMPAQ-ID-REC-MIB
| compaq-common-mgmt |
From CPQHOST-MIB
| compaq | OBJECT-IDENTITY |
From CPQRACK-MIB
| cpqRackCommonEnclosureName | OBJECT-TYPE |
| cpqRackCommonEnclosureSerialNum | OBJECT-TYPE |
| cpqRackName | OBJECT-TYPE |
| cpqRackNetConnectorFWRev | OBJECT-TYPE |
| cpqRackNetConnectorLocation | OBJECT-TYPE |
| cpqRackNetConnectorName | OBJECT-TYPE |
| cpqRackNetConnectorSerialNum | OBJECT-TYPE |
| cpqRackNetConnectorSparePartNumber | OBJECT-TYPE |
| cpqRackUid | OBJECT-TYPE |
From RFC-1215
| TRAP-TYPE |
From RFC1155-SMI
| enterprises |
From RFC1213-MIB
| mib-2 |
OIDs
RFC description
Compaq/HP switch and enclosure management traps for monitoring fans, temperature, and power supplies.
Start monitoring HP (Compaq) ProLiant server (trap definitions) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.