COM21-HCXVLAN-MIB

All MIBs › COM21-HCXVLAN-MIB

Organization: Com21, Inc.

Last Updated: 1997-01-08

Category: DOCSIS and Cable, VLAN and Bridging

Description: Manages VLAN segmentation and subscriber traffic separation on COM21 HCX cable systems.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is COM21-HCXVLAN-MIB?

This is the Com21 ComController VLAN MIB, part of the HCX product family, used to configure and manage VLAN-based subscriber traffic segmentation on COM21's hybrid fiber-coax cable access equipment. It exposes VLAN assignment, tagging, and traffic-separation configuration objects for subscriber and service traffic carried over the ComController chassis. From a monitoring standpoint it is used mainly to check the configuration/operational status of VLAN segmentation on the device - e.g., whether a subscriber's VLAN mapping is correctly applied - though it may also expose card status tied to VLAN processing. It is one of several COM21 ComController MIBs (alongside HCXRX and HCXTOP) that together cover the full chassis, and likely depends on general chassis/interface conventions shared across that family. It would be deployed by cable operators needing to monitor and audit subscriber traffic segregation on their HFC access network. Engineers can download the COM21-HCXVLAN-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in COM21-HCXVLAN-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

COM21 ComController headend unit
cable/HFC broadband access equipment

Monitoring Examples

No sample object names were provided for this MIB. Based on its stated purpose, it would likely expose per-subscriber or per-port VLAN assignment tables that an operator would check to confirm traffic separation is correctly configured, or to spot a misapplied VLAN causing subscriber traffic leakage. This is inferred from the module's stated purpose rather than confirmed object names.

What Can Be Monitored

VLAN assignment/tagging configuration
subscriber traffic segmentation status

Imported Objects

From COM21-HCX-MIB

com21	OBJECT-IDENTITY
com21Hcx	OBJECT-IDENTITY

From COM21-HCXALM-MIB

hcxAlmSeverity	OBJECT-TYPE
hcxEventLogTime	OBJECT-TYPE

From SNMPv2-SMI

Gauge32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks

From SNMPv2-TC

DisplayString
MacAddress

How to Use in IPNetwork Monitor

Example using hcxVlanCurrMcastTxPkts OID:

Select a Com21 ComController HCX VLAN management (legacy) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type hcxVlanCurrMcastTxPkts into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports contains the number of Multicast net packets sent downstream over the Vlan in the current 15min period. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Gauge32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
com21HcxOc3VlanStatsEntry	1.3.6.1.4.1.1141.2.83.1.1		not-accessible	.
com21HcxOc3VlanStatsGroup	1.3.6.1.4.1.1141.2.83
com21HcxOc3VlanStatsTable	1.3.6.1.4.1.1141.2.83.1		not-accessible	.
com21HcxVlan	1.3.6.1.4.1.1141.2.80			This is the Com21 ComController Vlan MIB module. COM21 Part# 005-0025-00
com21HcxVlanCtrlEntry	1.3.6.1.4.1.1141.2.81.1.1		not-accessible	.
com21HcxVlanCtrlGroup	1.3.6.1.4.1.1141.2.81
com21HcxVlanCtrlTable	1.3.6.1.4.1.1141.2.81.1		not-accessible	.
com21HcxVlanStatsEntry	1.3.6.1.4.1.1141.2.82.1.1		not-accessible	.
com21HcxVlanStatsGroup	1.3.6.1.4.1.1141.2.82
com21HcxVlanStatsTable	1.3.6.1.4.1.1141.2.82.1		not-accessible	.
INT hcxOc3VlanStatsClear	1.3.6.1.4.1.1141.2.83.1.1.8	INTEGER	read-write	Provides the capability to clear the statistics. Clearing of Statistics is allowed only if hcxStatsControl attribute is set to wrapCurr.
I32 hcxOc3VlanStatsCurrCrcPkts	1.3.6.1.4.1.1141.2.83.1.1.4	Integer32	read-only	Specifies the number of Pkts. Received with CRC error on the VPI/VCI value associated with this entry in the current 15-min time period.
I32 hcxOc3VlanStatsCurrRxPkts	1.3.6.1.4.1.1141.2.83.1.1.3	Integer32	read-only	Specifies the number of Pkts. Received on the VPI/VCI value associated with this entry in the current 15-min time period.
I32 hcxOc3VlanStatsCurrTxPkts	1.3.6.1.4.1.1141.2.83.1.1.2	Integer32	read-only	Specifies the number of Pkts. Transmitted on the VPI/VCI value associated with this entry in the current 15-min time period.
I32 hcxOc3VlanStatsPrevCrcPkts	1.3.6.1.4.1.1141.2.83.1.1.7	Integer32	read-only	Specifies the number of Pkts. Received with CRC error on the VPI/VCI value associated with this entry in the previous 15-min time period.
I32 hcxOc3VlanStatsPrevRxPkts	1.3.6.1.4.1.1141.2.83.1.1.6	Integer32	read-only	Specifies the number of Pkts. Received on the VPI/VCI value associated with this entry in the previous 15-min time period.
I32 hcxOc3VlanStatsPrevTxPkts	1.3.6.1.4.1.1141.2.83.1.1.5	Integer32	read-only	Specifies the number of Pkts. Transmitted on the VPI/VCI value associated with this entry in the previous 15-min time period.
INT hcxOc3VlanStatsVlanId	1.3.6.1.4.1.1141.2.83.1.1.1	INTEGER	read-only	Specifies the index into this table. An entry exists for each vlan which is on the Oc3 Port.
INT hcxVlanCardType	1.3.6.1.4.1.1141.2.81.1.1.5	INTEGER	read-write	Specifies the CardType to which the Vlan is attached to. Shelf/Slot/CardType/Port will uniquely identify the port to which this Vlan is attached to
INT hcxVlanClearStats	1.3.6.1.4.1.1141.2.82.1.1.18	INTEGER	read-write	This attribute is used to clear the all VLAN statistics counters in this group. This operation is only possible if the hcxStatsControl attribute is set to wrapCurr.
INT hcxVlanCtrlId	1.3.6.1.4.1.1141.2.81.1.1.1	INTEGER	read-only	Specifies the associated Vlan Id.
STR hcxVlanCtrlName	1.3.6.1.4.1.1141.2.81.1.1.2	DisplayString	read-write	contains a descriptive name for the VLAN.
G32 hcxVlanCurrMcastDroppedPkts	1.3.6.1.4.1.1141.2.82.1.1.3	Gauge32	read-only	contains the number of Multicast downstream packets dropped in the current 15min period.
G32 hcxVlanCurrMcastTxPktsEx	1.3.6.1.4.1.1141.2.82.1.1.2	Gauge32	read-only	contains the number of Multicast net packets sent downstream over the Vlan in the current 15min period.
INT hcxVlanIpArpFiltEnbl	1.3.6.1.4.1.1141.2.81.1.1.12	INTEGER	read-write	Specifies whether ARP authentication filtering should be enabled on this VLAN. This filter is applicable to 10BT, 100BT, and OC3 cards. It filters traffic in the upstream direction. Default is false. This filter can also be enabled for a specific ComPort via the MIB attribute hcxStuIpArpFiltEnable.
INT hcxVlanIpBootpReplyFiltEnbl	1.3.6.1.4.1.1141.2.81.1.1.16	INTEGER	read-write	Specifies whether BOOTP replies, or DHCPOFFER, or DHCPACK packets should be filtered on this VLAN. This filter is applicable to 100BT, and OC3 cards. It it not applicable to 10BT card. It filters traffic in the upstream direction. Default is true. This filter can also be enabled for a specific ComPort via the MIB attribute hcxStuIpBootpReplyFiltEnbl.
INT hcxVlanIpBootpReqFiltEnbl	1.3.6.1.4.1.1141.2.81.1.1.15	INTEGER	read-write	Specifies whether BOOTP requests, or DHCPDISCOVER, or DHCPREQUEST, or DHCPRELEASE packets should be filtered on this VLAN. This filter is applicable to 100BT, and OC3 cards. It is not applicable to 10BT card. It filters traffic in the downstream direction. Default is true. This filter cannot be controlled per ComPort.
G32 hcxVlanIpCurrArpFiltStat	1.3.6.1.4.1.1141.2.82.1.1.4	Gauge32	read-only	contains the number of ARP packets from this Vlan dropped due to authentication filtering in the current 15minute collection period
G32 hcxVlanIpCurrBootpReplyFiltStat	1.3.6.1.4.1.1141.2.82.1.1.8	Gauge32	read-only	Contains the number of Bootp Reply packets from this VLAN dropped due to filtering in the current 15 minute collection period.
G32 hcxVlanIpCurrBootpReqFiltStat	1.3.6.1.4.1.1141.2.82.1.1.7	Gauge32	read-only	Contains the number of Bootp Req packets from this VLAN dropped due to filtering in the current 15 minute collection period.
G32 hcxVlanIpCurrDhcpSnoopFiltStat	1.3.6.1.4.1.1141.2.82.1.1.9	Gauge32	read-only	Contains the number of DHCP Ack packets from this VLAN snooped due to filtering in the current 15 minute collection period.
G32 hcxVlanIpCurrDstFiltStat	1.3.6.1.4.1.1141.2.82.1.1.6	Gauge32	read-only	Contains the number of IP packets from this VLAN dropped due to destination address filtering in the current 15 minute collection period.
G32 hcxVlanIpCurrNetbiosFiltStat	1.3.6.1.4.1.1141.2.82.1.1.28	Gauge32	read-only	Contains the number of NetBIOS-over-IP packets that are filtered from this VLAN in the current 15 minute collection period.
G32 hcxVlanIpCurrSrcFiltStat	1.3.6.1.4.1.1141.2.82.1.1.5	Gauge32	read-only	Contains the number of IP packets from this VLAN dropped due to source address filtering in the current 15 minute collection period.
INT hcxVlanIpDhcpSnoopFiltEnbl	1.3.6.1.4.1.1141.2.81.1.1.17	INTEGER	read-write	Specifies whether DHCP snooping should be enabled on this VLAN. This filter is applicable to 100BT, and OC3 cards. It is not applicable to 10BT card. It snoops traffic in the downstream direction for DHCPACK packets, and in the upstream direction for DHCPDECLINE or DHCPRELEASE packets. Dynamic IP address assigments thus learned are stored in the valid source IP address table (com21HcxStuSrcIpAddrGroup.) Default is false. This filter can also be enabled for a specific ComPort via the MIB attribute hcxStuIpDhcpSnoopFiltEnbl.
INT hcxVlanIpDstFiltEnbl	1.3.6.1.4.1.1141.2.81.1.1.14	INTEGER	read-write	Specifies whether IP destination address filtering should be enabled on this VLAN. This filter is applicable to 100BT, and OC3 cards. It is not applicable to to 10BT card. It filters traffic in the upstream direction. Default is false. This filter can also be enabled for a specific ComPort via the MIB attribute hcxStuIpDstFiltEnable.
INT hcxVlanIpNetbiosFiltEnbl	1.3.6.1.4.1.1141.2.81.1.1.27	INTEGER	read-write	Specifies whether NetBIOS-over-IP packets should be filtered on this VLAN. This filter is applicable to 100BT and OC3 cards. It is not applicable to 10BT card. It filters traffic in the upstream direction. Default is false. This filter can also be enabled for a specific ComPort via the MIB attribute hcxStuIpNetbiosFiltEnbl.
G32 hcxVlanIpPrevArpFiltStat	1.3.6.1.4.1.1141.2.82.1.1.12	Gauge32	read-only	contains the number of ARP packets from this Vlan dropped due to authentication filtering in the previous 15minute collection period
G32 hcxVlanIpPrevBootpReplyFiltStat	1.3.6.1.4.1.1141.2.82.1.1.16	Gauge32	read-only	Contains the number of Bootp Reply packets from this VLAN dropped due to filtering in the previous 15 minute collection period.
G32 hcxVlanIpPrevBootpReqFiltStat	1.3.6.1.4.1.1141.2.82.1.1.15	Gauge32	read-only	Contains the number of Bootp Req packets from this VLAN dropped due to filtering in the previous 15 minute collection period.
G32 hcxVlanIpPrevDhcpSnoopFiltStat	1.3.6.1.4.1.1141.2.82.1.1.17	Gauge32	read-only	Contains the number of DHCP Ack packets from this VLAN snooped due to filtering in the previous 15 minute collection period.
G32 hcxVlanIpPrevDstFiltStat	1.3.6.1.4.1.1141.2.82.1.1.14	Gauge32	read-only	Contains the number of IP packets from this VLAN dropped due to destination address filtering in the previous 15 minute collection period.
G32 hcxVlanIpPrevNetbiosFiltStat	1.3.6.1.4.1.1141.2.82.1.1.38	Gauge32	read-only	Contains the number of NetBIOS-over-IP packets that are filtered from this VLAN in the previous 15 minute collection period.
G32 hcxVlanIpPrevSrcFiltStat	1.3.6.1.4.1.1141.2.82.1.1.13	Gauge32	read-only	Contains the number of IP packets from this VLAN dropped due to source address filtering in the previous 15 minute collection period.
INT hcxVlanIpSrcFiltEnbl	1.3.6.1.4.1.1141.2.81.1.1.13	INTEGER	read-write	Specifies whether IP source address filtering should be enabled on this VLAN. This filter is applicable to 100BT, and OC3 cards. It is not applicable to 10BT card. It filters traffic in the upstream direction. Default is false. This filter can also be enabled for a specific ComPort via the MIB attribute hcxStuIpSrcFiltEnable.
INT hcxVlanL2AppletalkFiltEnbl	1.3.6.1.4.1.1141.2.81.1.1.25	INTEGER	read-write	Specifies whether AppleTalk packets should be filtered on this VLAN. This filter is applicable to 100BT and OC3 cards. It is not applicable to 10BT card. It filters traffic in both upstream and downstream directions. Default is false. This filter can also be enabled for a specific ComPort via the MIB attribute hcxStuL2AppletalkFiltEnbl.
INT hcxVlanL2ArpIpv4FiltEnbl	1.3.6.1.4.1.1141.2.81.1.1.21	INTEGER	read-write	Specifies whether ARP packets should be filtered on this VLAN. This filter is applicable to 100BT and OC3 cards. It is not applicable to 10BT card. It filters traffic in both upstream and downstream directions. Default is false. This filter can also be enabled for a specific ComPort via the MIB attribute hcxStuL2ArpIpv4FiltEnbl.
G32 hcxVlanL2CurrAppletalkFiltStat	1.3.6.1.4.1.1141.2.82.1.1.26	Gauge32	read-only	Contains the number of AppleTalk packets filtered from this VLAN in the current 15 minute collection period.
G32 hcxVlanL2CurrArpIpv4FiltStat	1.3.6.1.4.1.1141.2.82.1.1.22	Gauge32	read-only	Contains the number of IPv4 ARP packets filtered from this VLAN in the current 15 minute collection period.
G32 hcxVlanL2CurrEnetFiltStat	1.3.6.1.4.1.1141.2.82.1.1.21	Gauge32	read-only	Contains the number of Ethernet packets filtered from this VLAN in the current 15 minute collection period.
G32 hcxVlanL2CurrIpv4FiltStat	1.3.6.1.4.1.1141.2.82.1.1.23	Gauge32	read-only	Contains the number of IPv4 packets filtered from this VLAN in the current 15 minute collection period.
G32 hcxVlanL2CurrIpv6FiltStat	1.3.6.1.4.1.1141.2.82.1.1.24	Gauge32	read-only	Contains the number of IPv6 packets filtered from this VLAN in the current 15 minute collection period.
G32 hcxVlanL2CurrIpxFiltStat	1.3.6.1.4.1.1141.2.82.1.1.25	Gauge32	read-only	Contains the number of IPX packets filtered from this VLAN in the current 15 minute collection period.
G32 hcxVlanL2CurrNonSnapFiltStat	1.3.6.1.4.1.1141.2.82.1.1.20	Gauge32	read-only	Contains the number of non-SNAP-encoded IEEE 802.3 packets filtered from this VLAN in the current 15 minute collection period.
G32 hcxVlanL2CurrOthersFiltStat	1.3.6.1.4.1.1141.2.82.1.1.27	Gauge32	read-only	Contains the number of packets that are none of the above type of filters that are filtered from this VLAN in the current 15 minute collection period.
G32 hcxVlanL2CurrSnapFiltStat	1.3.6.1.4.1.1141.2.82.1.1.19	Gauge32	read-only	Contains the number of SNAP-encoded IEEE 802.3 packets filtered from this VLAN in the current 15 minute collection period.
INT hcxVlanL2EnetFiltEnbl	1.3.6.1.4.1.1141.2.81.1.1.20	INTEGER	read-write	Specifies whether Ethernet packets should be filtered on this VLAN. This filter is applicable to 100BT and OC3 cards. It is not applicable to 10BT Card. It filters traffic in both upstream and downstream directions. Default is false. This filter can also be enabled for a specific ComPort via the MIB attribute hcxStuL2EnetFiltEnbl.
INT hcxVlanL2Ipv4FiltEnbl	1.3.6.1.4.1.1141.2.81.1.1.22	INTEGER	read-write	Specifies whether IPv4 packets should be filtered on this VLAN. This filter is applicable to 100BT and OC3 cards. It is not applicable to 10BT card. It filters traffic in both upstream and downstream directions. Default is false. This filter can also be enabled for a specific ComPort via the MIB attribute hcxStuL2Ipv4FiltEnbl.
INT hcxVlanL2Ipv6FiltEnbl	1.3.6.1.4.1.1141.2.81.1.1.23	INTEGER	read-write	Specifies whether IPv6 packets should be filtered on this VLAN. This filter is applicable to 100BT and OC3 cards. It is not applicable to 10BT card. It filters traffic in both upstream and downstream directions. Default is false. This filter can also be enabled for a specific ComPort via the MIB attribute hcxStuL2Ipv6FiltEnbl.
INT hcxVlanL2IpxFiltEnbl	1.3.6.1.4.1.1141.2.81.1.1.24	INTEGER	read-write	Specifies whether IPX packets should be filtered on this VLAN. This filter is applicable to 100BT and OC3 cards. It is not applicable to 10BT card. It filters traffic in both upstream and downstream directions. Default is false. This filter can also be enabled for a specific ComPort via the MIB attribute hcxStuL2IpxFiltEnbl.
INT hcxVlanL2NonSnapFiltEnbl	1.3.6.1.4.1.1141.2.81.1.1.19	INTEGER	read-write	Specifies whether non-SNAP-encoded IEEE 802.3 packets should be filtered on this VLAN. This filter is applicable to 10BT, 100BT, and OC3 cards. It filters traffic in both upstream and downstream directions. Default is false. This filter can also be enabled for a specific ComPort via the MIB attribute hcxStuL2NonSnapFiltEnbl.
INT hcxVlanL2OthersFiltEnbl	1.3.6.1.4.1.1141.2.81.1.1.26	INTEGER	read-write	Specifies whether all layer 2 packets that are none of the above (ARP, IPv4, IPv6, IPX, AppleTalk) should be filtered on this VLAN. This filter is applicable to 100BT and OC3 cards. It is not applicable to 10BT card. It filters traffic in both upstream and downstream directions. Default is false. This filter can also be enabled for a specific ComPort via the MIB attribute hcxStuL2OthersFiltEnbl.
G32 hcxVlanL2PrevAppletalkFiltStat	1.3.6.1.4.1.1141.2.82.1.1.36	Gauge32	read-only	Contains the number of AppleTalk packets filtered from this VLAN in the previous 15 minute collection period.
G32 hcxVlanL2PrevArpIpv4FiltStat	1.3.6.1.4.1.1141.2.82.1.1.32	Gauge32	read-only	Contains the number of IPv4 ARP packets filtered from this VLAN in the previous 15 minute collection period.
G32 hcxVlanL2PrevEnetFiltStat	1.3.6.1.4.1.1141.2.82.1.1.31	Gauge32	read-only	Contains the number of Ethernet packets filtered from this VLAN in the previous 15 minute collection period.
G32 hcxVlanL2PrevIpv4FiltStat	1.3.6.1.4.1.1141.2.82.1.1.33	Gauge32	read-only	Contains the number of IPv4 packets filtered from this VLAN in the previous 15 minute collection period.
G32 hcxVlanL2PrevIpv6FiltStat	1.3.6.1.4.1.1141.2.82.1.1.34	Gauge32	read-only	Contains the number of IPv6 packets filtered from this VLAN in the previous 15 minute collection period.
G32 hcxVlanL2PrevIpxFiltStat	1.3.6.1.4.1.1141.2.82.1.1.35	Gauge32	read-only	Contains the number of IPX packets filtered from this VLAN in the previous 15 minute collection period.
G32 hcxVlanL2PrevNonSnapFiltStat	1.3.6.1.4.1.1141.2.82.1.1.30	Gauge32	read-only	Contains the number of non-SNAP-encoded IEEE 802.3 packets filtered from this VLAN in the previous 15 minute collection period.
G32 hcxVlanL2PrevOthersFiltStat	1.3.6.1.4.1.1141.2.82.1.1.37	Gauge32	read-only	Contains the number of packets that are none of the above type of filters that are filtered from this VLAN in the previous 15 minute collection period.
G32 hcxVlanL2PrevSnapFiltStat	1.3.6.1.4.1.1141.2.82.1.1.29	Gauge32	read-only	Contains the number of SNAP-encoded IEEE 802.3 packets filtered from this VLAN in the previous 15 minute collection period.
INT hcxVlanL2SnapFiltEnbl	1.3.6.1.4.1.1141.2.81.1.1.18	INTEGER	read-write	Specifies whether SNAP-encoded IEEE 802.3 packets should be filtered on this VLAN. This filter is applicable to 100BT, and OC3 cards. It is not applicable to 10BT card. It filters traffic in both upstream and downstream directions. Default is false. This filter can also be enabled for a specific ComPort via the MIB attribute hcxStuL2SnapFiltEnbl.
INT hcxVlanMcastDnstrmRate	1.3.6.1.4.1.1141.2.81.1.1.11	INTEGER	read-write	Specifies the downstream multicast rate associated with this Vlan. Defined in bits per second. The multicast rate is ondemand (not guaranteed if enough bandwidth is not available). 0 stops all broadcast forwarding. Default 100000. If a twoWay modem of model CP1000, CP1000A, CP1000B or CP1000C is acquired in the system or a teleRet modem is configured then the multicast rate will be dynamically lowered to not exceed 1000000. Under that condition an attempt to set the rate to greater than 1000000 will be rejected. The rate wil remain at 1000000 even if the condition clears eventually (all the modems of model CP1000, CP1000A, CP1000B or CP1000C get deacquired and no more teleRet modems are configured).
INT hcxVlanPeerToPeerFlag	1.3.6.1.4.1.1141.2.81.1.1.10	INTEGER	read-write	Specifies whether STU to STU communication is allowed in the Vlan. If false, STU to STU communication is not allowed and has to go through an external router. If true direct STU to STU communication is allowed without the intervention of an external router. This attribute is not applicable to VLANs on 10bT Card and defaults to a read-only value of true. Default for 100bT/OC3 is false.
I32 hcxVlanPort	1.3.6.1.4.1.1141.2.81.1.1.6	Integer32	read-write	Specifies the Port to which the Vlan is attached to. Shelf/Slot/CardType/Port will uniquely identify the port to which this Vlan is attached to
G32 hcxVlanPrevMcastDroppedPkts	1.3.6.1.4.1.1141.2.82.1.1.11	Gauge32	read-only	contains the number of Multicast downstream packets dropped in the previous 15min period.
G32 hcxVlanPrevMcastTxPkts	1.3.6.1.4.1.1141.2.82.1.1.10	Gauge32	read-only	contains the number of Multicast net packets sent downstream over the Vlan in the previous 15min period.
COM hcxVlanPriStatus	1.3.6.1.4.1.1141.2.81.1.1.7	Com21RowStatus	read-create	lets the user Create a Vlan instance. If already created it lets the user Enable, Disable or Delete the Vlan. Note that the VLAN cannot be Enabled or Disabled until the attributes hcxVlanShelf, hcxVlanSlot, hcxVlanCardType and hcxVlanPort have valid values.
I32 hcxVlanRate	1.3.6.1.4.1.1141.2.81.1.1.31	Integer32	read-write	Specifies the Maximum Rate at which this Vlan can operate. This attribute is used only if the vlan is on an OC3 Port. Default is 10,000,000 bps
INT hcxVlanSecStatus	1.3.6.1.4.1.1141.2.81.1.1.8	INTEGER	read-only	Indicates whether the Vlan is ONLINE or OFFLINE.
INT hcxVlanShelf	1.3.6.1.4.1.1141.2.81.1.1.3	INTEGER	read-write	Specifies the Shelf to which the Vlan is attached to. Shelf/Slot/CardType/Port will uniquely identify the port to which this Vlan is attached to
I32 hcxVlanSlot	1.3.6.1.4.1.1141.2.81.1.1.4	Integer32	read-write	Specifies the Slot to which the Vlan is attached to. Shelf/Slot/CardType/Port will uniquely identify the port to which this Vlan is attached to
INT hcxVlanStatsId	1.3.6.1.4.1.1141.2.82.1.1.1	INTEGER	read-only	Is used as an Index to read the Statistics of a given Vlan.
INT hcxVlanType	1.3.6.1.4.1.1141.2.81.1.1.9	INTEGER	read-write	Specifies whether the Vlan is an internal Vlan or external Vlan. internal Vlan does not allow traffic to leave the Vlan or enter the Vlan. external Vlan allows traffic in both directions. default is external. Note that this attribute is not applicable to 10bT card.
INT hcxVlanVci	1.3.6.1.4.1.1141.2.81.1.1.30	INTEGER	read-write	Specifies the VCI to use if this vlan is on an OC3 Port. This attribute is not used if vlan is not on a oc3 Port. If the hcxVlanVpi value is set to 0, the valid range for this attribute is 38 to 255 Default is 0.
INT hcxVlanVpi	1.3.6.1.4.1.1141.2.81.1.1.29	INTEGER	read-write	Specifies the VPI to use if this vlan is on an OC3 Port. This attribute is not used if vlan is not on a oc3 Port. Default is 0.
I32 hcxVPNNum	1.3.6.1.4.1.1141.2.81.1.1.28	Integer32	read-write	Specifies the Virtual Private Network to which this Vlan belongs to. If this is not set, it defaults to 0. If a ComPort which belongs to this Vlan has to be configured to support Voice, then a VPN Number has to be defined. Default is 0.

RFC description

Manages VLAN configuration and statistics on Com21 HCX ComController devices.

Start monitoring Com21 ComController HCX VLAN management (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download COM21-HCXVLAN-MIB