COM21-HCXVLAN-MIB :: hcxVlanL2EnetFiltEnbl

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCOM21-HCXVLAN-MIBhcxVlanL2EnetFiltEnbl

hcxVlanL2EnetFiltEnbl

Module: COM21-HCXVLAN-MIB

OID (symbolic): COM21-HCXVLAN-MIB::hcxVlanL2EnetFiltEnbl

OID (numeric): 1.3.6.1.4.1.1141.2.81.1.1.20

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Specifies whether Ethernet packets should be filtered on this VLAN. This filter is applicable to 100BT and OC3 cards. It is not applicable to 10BT Card. It filters traffic in both upstream and downstream directions. Default is false. This filter can also be enabled for a specific ComPort via the MIB attribute hcxStuL2EnetFiltEnbl.

What is hcxVlanL2EnetFiltEnbl?

This read-write true/false attribute, false by default and applicable only to 100BT and OC3 cards, filters Ethernet packets in both directions on this VLAN, and can also be enabled per ComPort. An admin can use this to block standard Ethernet-framed traffic if the VLAN is meant to isolate a different protocol only. For example, an admin temporarily enables this filter while troubleshooting to confirm that ordinary Ethernet traffic, and not another protocol, is causing VLAN congestion.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1141.2.81.1.1.20
snmpwalk -v2c -c public <target> COM21-HCXVLAN-MIB::hcxVlanL2EnetFiltEnbl

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1141.2.81.1.1.20.1
snmpget -v2c -c public <target> COM21-HCXVLAN-MIB::hcxVlanL2EnetFiltEnbl.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.1141.2.81.1.1.20.1 i <value>

Start monitoring Com21 ComController HCX VLAN management (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the COM21-HCXVLAN-MIB::hcxVlanL2EnetFiltEnbl OID value, configure state conditions and alerts, and monitor any Com21 ComController HCX VLAN management (legacy) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1141com21COM21-HCX-MIB
1.3.6.1.4.1.1141.2com21HcxCOM21-HCX-MIB
Numeric OIDNameModule
1.3.6.1.4.1.1141.2.81com21HcxVlanCtrlGroupCOM21-HCXVLAN-MIB
1.3.6.1.4.1.1141.2.81.1com21HcxVlanCtrlTableCOM21-HCXVLAN-MIB
1.3.6.1.4.1.1141.2.81.1.1com21HcxVlanCtrlEntryCOM21-HCXVLAN-MIB
1.3.6.1.4.1.1141.2.81.1.1.20hcxVlanL2EnetFiltEnblCOM21-HCXVLAN-MIB