Description: The maximum capacity of this output sub-unit in output sub-unit capacity units (PrtCapacityUnitTC). There is no convention associated with the media itself so this value essentially reflects claimed capacity. If this output sub-unit can reliably sense this value, the value is sensed by the printer and may not be changed by management requests; otherwise, the value may be written (by a Remote Control Panel or a Management Application). The value (-1) means other and specifically indicates that the sub-unit places no restrictions on this parameter. The value (-2) means unknown. Refer to Printer Management Standards web page, http://www.pwg.org, for more details in the original format of the Standard Printer MIB. Additional information: Replaces PML OUTBINn-MAXIMUM-CAPACITY. Output sub-unit 2 is not supported if any output paper handling device is attached. The capacity of sub-unit 4 depends on the mode of operation. The capcities are as follows: Stacker: 3000 letter papers (sub-units 5-11 do not exist) Job Separator: 250 (sub-units 5-11 do not exist) Stapler: 125 (sub-units 5 - 11 do not exist) Mailbox: 250 (this is the default mode)