HUAWEI-FR-QOS-MIB

All MIBs › HUAWEI-FR-QOS-MIB

Organization: Huawei Technologies co.,Ltd.

Last Updated: 2004-07-12

Category: Frame Relay, Quality of Service, Vendor: Huawei

Description: Huawei Frame Relay QoS MIB providing traffic shaping and queuing policy configuration objects for Frame Relay permanent virtual circuits.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HUAWEI-FR-QOS-MIB?

HUAWEI-FR-QOS-MIB is a Huawei vendor MIB covering Quality of Service management for Frame Relay permanent virtual circuits (PVCs) on Huawei routers/switches supporting Frame Relay WAN links. It exposes traffic shaping and queuing policy configuration objects, including the direction (ingress/egress) a given QoS policy applies to, allowing granular control of PVC bandwidth and congestion behavior. Administrators use it to monitor the software/configuration status of QoS policy application on Frame Relay circuits, helping verify that shaping/queuing policies are correctly applied in the intended direction and diagnosing congestion or bandwidth violations on a PVC. As a Frame Relay-specific QoS module, it logically depends on the standard Frame Relay MIB (RFC 2115 / FRAME-RELAY-DTE-MIB) for base PVC identification, though no explicit dependency text was given. It is typically deployed in carrier or enterprise WAN environments still running Frame Relay links on Huawei equipment requiring QoS differentiation. Engineers can download the HUAWEI-FR-QOS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HUAWEI-FR-QOS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Huawei router/switch with Frame Relay WAN interfaces

Monitoring Examples

An operator would check the QoS policy direction object described in the module (applied per Frame Relay PVC) alongside associated shaping/queuing parameters to confirm a policy is correctly applied on, say, the egress direction of a given PVC. A PVC showing unexpected congestion or discards despite a configured shaping policy would suggest the policy direction or queuing configuration was set incorrectly. No concrete sample object names beyond the direction-policy description were provided for this MIB, so specific table/column identifiers cannot be fully confirmed.

What Can Be Monitored

QoS policy direction (ingress/egress)
traffic shaping configuration
queuing policy configuration
per-PVC QoS application status

Imported Objects

From HUAWEI-MIB

hwDatacomm

OBJECT-IDENTITY

From RFC1213-MIB

ifIndex

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString
MacAddress
RowStatus
TEXTUAL-CONVENTION

How to Use in IPNetwork Monitor

Example using hwRTPFrPvcQueueOutputs OID:

Select a Huawei router/switch with Frame Relay WAN interface (per-PVC QoS) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type hwRTPFrPvcQueueOutputs into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. Outputs of Rtpq Queue. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
hwQoS	1.3.6.1.4.1.2011.5.25.32
hwFrQoSMib	1.3.6.1.4.1.2011.5.25.32.3			The HUAWEI-FR-QOS-MIB contains objects to Manage configuration and Monitor running state for Class Based FR QoS feature. ******************************* MIB Tables ******************************** This MIB consists of the following tables: 1 : hwFrClassCfgInfoTable 2 : hwCirAllowCfgInfoTable 3 : hwCirCfgInfoTable 4 : hwIfApplyFrClassTable 5 : hwPvcApplyFrClassTable 6 : hwFrPvcBandwidthTable 7 : hwRTPFrClassApplyTable 8 : hwRTPFrPvcQueueRunInfoTable
hwFrQoSObjects	1.3.6.1.4.1.2011.5.25.32.3.1
hwFrClassObjects	1.3.6.1.4.1.2011.5.25.32.3.1.1
I32 hwFrClassIndexNext	1.3.6.1.4.1.2011.5.25.32.3.1.1.1	Integer32	read-only	This object contains an appropriate value to be used for hwFrClassIndex when creating rows in the hwFrClassCfgInfoTable. Begin with 0.
hwFrClassCfgInfoTable	1.3.6.1.4.1.2011.5.25.32.3.1.1.2		not-accessible	A table of Fr Class configuration information.
hwFrClassCfgInfoEntry	1.3.6.1.4.1.2011.5.25.32.3.1.1.2.1		not-accessible	Fr Class Configuration Information Entry.
I32 hwFrClassIndex	1.3.6.1.4.1.2011.5.25.32.3.1.1.2.1.1	Integer32	read-only	Index of Fr Class. Begin with 0.
OCT hwFrClassName	1.3.6.1.4.1.2011.5.25.32.3.1.1.2.1.2	OCTET STRING	read-create	Name of Fr Class.
ROW hwFrClassRowStatus	1.3.6.1.4.1.2011.5.25.32.3.1.1.2.1.3	RowStatus	read-create	RowStatus. Three actions are used: active, createAndGo, destroy
hwCirAllowCfgInfoTable	1.3.6.1.4.1.2011.5.25.32.3.1.1.3		not-accessible	A table of DCE allowed rate Configuration information.
hwCirAllowCfgInfoEntry	1.3.6.1.4.1.2011.5.25.32.3.1.1.3.1		not-accessible	DCE allowed ratee Configuration Information Entry.
I32 hwCirAllowFrClassIndex	1.3.6.1.4.1.2011.5.25.32.3.1.1.3.1.1	Integer32	read-only	Index of Fr Class. Begin with 0.Equal to hwFrClassIndex
I32 hwCirAllowDirection	1.3.6.1.4.1.2011.5.25.32.3.1.1.3.1.2	Integer32	read-only	Packet Direction. value 1,2,3 Used by hwCirAllowValue. inbound (1) outbound (2) inbound and outbound (3)
I32 hwCirAllowValue	1.3.6.1.4.1.2011.5.25.32.3.1.1.3.1.3	Integer32	read-create	DCE allowed rate (value greater than CIR) Unit : Bits per second. Value : .
ROW hwCirAllowRowStatus	1.3.6.1.4.1.2011.5.25.32.3.1.1.3.1.4	RowStatus	read-create	RowStatus. Three actions are used: active, createAndGo, destroy
hwCirCfgInfoTable	1.3.6.1.4.1.2011.5.25.32.3.1.1.4		not-accessible	A table of Committed Information Rate Configuration information.
hwCirCfgInfoEntry	1.3.6.1.4.1.2011.5.25.32.3.1.1.4.1		not-accessible	Committed Information Rate Configuration Information Entry.
I32 hwCirFrClassIndex	1.3.6.1.4.1.2011.5.25.32.3.1.1.4.1.1	Integer32	read-only	Index of Fr Class. Begin with 0.Equal to hwFrClassIndex
I32 hwCirValue	1.3.6.1.4.1.2011.5.25.32.3.1.1.4.1.2	Integer32	read-create	CIR in packet output direction ,bps. Value : .
ROW hwCirRowStatus	1.3.6.1.4.1.2011.5.25.32.3.1.1.4.1.3	RowStatus	read-create	RowStatus. Three actions are used: active, createAndGo, destroy
hwIfApplyFrClassTable	1.3.6.1.4.1.2011.5.25.32.3.1.1.5		not-accessible	A table of QoS Fr Class instance.
hwIfApplyFrClassEntry	1.3.6.1.4.1.2011.5.25.32.3.1.1.5.1		not-accessible	FrClass applied on interface Configuration Information Entry.
I32 hwIfApplyFrClassIfIndex	1.3.6.1.4.1.2011.5.25.32.3.1.1.5.1.1	Integer32	read-only	Interface Index, equal to ifIndex.
I32 hwIfApplyFrClassIndex	1.3.6.1.4.1.2011.5.25.32.3.1.1.5.1.2	Integer32	read-create	Index of Fr Class, equal to hwFrClassIndex
ROW hwIfApplyFrClassRowStatus	1.3.6.1.4.1.2011.5.25.32.3.1.1.5.1.3	RowStatus	read-create	RowStatus. Three actions are used: active, createAndGo, destroy
hwPvcApplyFrClassTable	1.3.6.1.4.1.2011.5.25.32.3.1.1.6		not-accessible	A table of QoS Fr Class instance.
hwPvcApplyFrClassEntry	1.3.6.1.4.1.2011.5.25.32.3.1.1.6.1		not-accessible	Fr Class applied on FR Pvc Configuration Information Entry.
I32 hwPvcApplyFrClassIfIndex	1.3.6.1.4.1.2011.5.25.32.3.1.1.6.1.1	Integer32	read-only	Fr Interface Index, equal to ifIndex.
I32 hwPvcApplyFrClassDlciNum	1.3.6.1.4.1.2011.5.25.32.3.1.1.6.1.2	Integer32	read-only	Fr DLCI number.
I32 hwPvcApplyFrClassIndex	1.3.6.1.4.1.2011.5.25.32.3.1.1.6.1.3	Integer32	read-create	Index of Fr Class, equal to hwFrClassIndex
ROW hwPvcApplyFrClassRowStatus	1.3.6.1.4.1.2011.5.25.32.3.1.1.6.1.4	RowStatus	read-create	RowStatus. Three actions are used: active, createAndGo, destroy
hwFrPvcBandwidthTable	1.3.6.1.4.1.2011.5.25.32.3.1.1.7		not-accessible	A table of Running statistics for bandwidth.
hwFrPvcBandwidthEntry	1.3.6.1.4.1.2011.5.25.32.3.1.1.7.1		not-accessible	Bandwidth Running statistics
I32 hwFrPvcBandwidthMaxReservedBW	1.3.6.1.4.1.2011.5.25.32.3.1.1.7.1.1	Integer32	read-only	Max reserved bandWidth. Unit : Kbps
I32 hwFrPvcBandwidthAvailable	1.3.6.1.4.1.2011.5.25.32.3.1.1.7.1.2	Integer32	read-only	Available bandWidth. Unit : Kbps
hwRTPQoSObjects	1.3.6.1.4.1.2011.5.25.32.3.1.2
hwRTPFrClassApplyTable	1.3.6.1.4.1.2011.5.25.32.3.1.2.1		not-accessible	A table of QoS rtpq instance.
hwRTPFrClassApplyEntry	1.3.6.1.4.1.2011.5.25.32.3.1.2.1.1		not-accessible	Rtpq Configuration Information Entry.
I32 hwRTPFrClassApplyFrClassIndex	1.3.6.1.4.1.2011.5.25.32.3.1.2.1.1.1	Integer32	read-only	Fr Class Index, equal to HwFrClassIndex.
I32 hwRTPFrClassApplyStartPort	1.3.6.1.4.1.2011.5.25.32.3.1.2.1.1.2	Integer32	read-create	RTP-PORT(3): start-port: 2000~65535
I32 hwRTPFrClassApplyEndPort	1.3.6.1.4.1.2011.5.25.32.3.1.2.1.1.3	Integer32	read-create	RTP-PORT(3): end-port: 2000~65535
I32 hwRTPFrClassApplyBandWidth	1.3.6.1.4.1.2011.5.25.32.3.1.2.1.1.4	Integer32	read-create	Max bandWidth Value: Absolute value: 8~1000000. Unit: Kbps
I32 hwRTPFrClassApplyCbs	1.3.6.1.4.1.2011.5.25.32.3.1.2.1.1.5	Integer32	read-create	Committed Burst Size: 1500~2000000. Unit: byte
ROW hwRTPFrClassApplyRowStatus	1.3.6.1.4.1.2011.5.25.32.3.1.2.1.1.6	RowStatus	read-create	RowStatus for RTPFrClassApply Table. Three actions are used: active, createAndGo, destroy
hwRTPFrPvcQueueRunInfoTable	1.3.6.1.4.1.2011.5.25.32.3.1.2.2		not-accessible	A table of Running statistics for RTPQ Queue applied on the FR PVC
hwRTPFrPvcQueueRunInfoEntry	1.3.6.1.4.1.2011.5.25.32.3.1.2.2.1		not-accessible	Queue statistics entry.
I32 hwRTPFrPvcQueueSize	1.3.6.1.4.1.2011.5.25.32.3.1.2.2.1.1	Integer32	read-only	Size of Rtpq Queue.
I32 hwRTPFrPvcQueueMaxSize	1.3.6.1.4.1.2011.5.25.32.3.1.2.2.1.2	Integer32	read-only	Max size of Rtpq Queue.
C32 hwRTPFrPvcQueueOutputsEx	1.3.6.1.4.1.2011.5.25.32.3.1.2.2.1.3	Counter32	read-only	Outputs of Rtpq Queue.
C32 hwRTPFrPvcQueueDiscards	1.3.6.1.4.1.2011.5.25.32.3.1.2.2.1.4	Counter32	read-only	Discards of Rtpq Queue.

RFC description

Manages Frame Relay (FR) Quality of Service configuration including class, bandwidth, and CIR policies.

Start monitoring Huawei router/switch with Frame Relay WAN interfaces (per-PVC QoS) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HUAWEI-FR-QOS-MIB