All MIBs › CISCO-DYNAMIC-PORT-VSAN-MIB › cdpvmActivate
cdpvmActivate
Module: CISCO-DYNAMIC-PORT-VSAN-MIB
OID (symbolic): CISCO-DYNAMIC-PORT-VSAN-MIB::cdpvmActivate
OID (numeric): 1.3.6.1.4.1.9.9.421.1.1.3
Node type: OBJECT-TYPE
Type: CpsmDbActivate
Access: read-write
Description: This object helps in activating the set of bindings in the cdpvmTable.
Setting this object to 'activate(1)' will result in the valid bindings present in cdpvmTable being activated and copied to the cpdvmEnfTable.
By default auto learn will be turned 'on' after activation. Before activation is attempted, it should be turned 'off'.
Setting this object to 'forceActivate(3)', will result in forced activation, even if there are errors during activation and the activated bindings will be copied to the cdpvmEnfTable.
Setting this object to 'deactivate(5)', will result in deactivation of currently activated valid bindings (if any). Currently active entries (if any), which would have been present in the cdpvmEnfTable, will be removed.
Setting this object to 'activateWithAutoLearnOff(2)' and 'forceActivateWithAutoLearnOff(4)' is not allowed.
Setting this object to 'noop(6)', results in no action.
The value of this object when read is always 'noop(6)'.
Activation will not be allowed if auto-learn is enabled.
What is cdpvmActivate?
Write-only control that, when set to activate, applies the configured dynamic port VSAN bindings by copying valid entries into the enforced binding table.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.421.1.1.3 snmpwalk -v2c -c public <target> CISCO-DYNAMIC-PORT-VSAN-MIB::cdpvmActivate
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.421.1.1.3.1 snmpget -v2c -c public <target> CISCO-DYNAMIC-PORT-VSAN-MIB::cdpvmActivate.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.421.1.1.3.1 s <value>
Start monitoring Cisco MDS Fibre Channel SAN switch/director with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-DYNAMIC-PORT-VSAN-MIB::cdpvmActivate OID value, configure state conditions and alerts, and monitor any Cisco MDS Fibre Channel SAN switch/director from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.421 | ciscoDpvmMIB | CISCO-DYNAMIC-PORT-VSAN-MIB |
| 1.3.6.1.4.1.9.9.421.1 | ciscoDpvmMIBObjects | CISCO-DYNAMIC-PORT-VSAN-MIB |
| 1.3.6.1.4.1.9.9.421.1.1 | cdpvmConfiguration | CISCO-DYNAMIC-PORT-VSAN-MIB |
| 1.3.6.1.4.1.9.9.421.1.1.3 | cdpvmActivate | CISCO-DYNAMIC-PORT-VSAN-MIB |