All MIBs › CISCO-DYNAMIC-PORT-VSAN-MIB › cdpvmDiffConfig
cdpvmDiffConfig
Module: CISCO-DYNAMIC-PORT-VSAN-MIB
OID (symbolic): CISCO-DYNAMIC-PORT-VSAN-MIB::cdpvmDiffConfig
OID (numeric): 1.3.6.1.4.1.9.9.421.1.1.9
Node type: OBJECT-TYPE
Type: CpsmDiffDb
Access: read-write
Description: The config database represented by cdpvmTable and the enforced database represented by cdpvmEnfTable can be compared to list out the differences.
This object specifies the reference database for the comparison.
This object when set to 'configDb(1)', compares the configuration database (cdpvmTable) with respect to the enforced database (cdpvmEnfTable). So, the enforced database will be the reference database and the results of comparison operation will be with respect to the enforced database.
This object when set to 'activeDb(2)', compares the enforced database with respect to the configuration database. So, the configured database will be the reference database and the results of comparison operation will be with respect to the configuration database.
No action will be taken if this object is set to 'noop(3)'.
The value of this object when read is always 'noop(3)'.
What is cdpvmDiffConfig?
Read-write setting that selects which database (configured vs. enforced) is used as the reference when comparing the config table against the enforced dynamic port VSAN table to find discrepancies.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.421.1.1.9 snmpwalk -v2c -c public <target> CISCO-DYNAMIC-PORT-VSAN-MIB::cdpvmDiffConfig
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.421.1.1.9.1 snmpget -v2c -c public <target> CISCO-DYNAMIC-PORT-VSAN-MIB::cdpvmDiffConfig.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.421.1.1.9.1 s <value>
Start monitoring Cisco MDS Fibre Channel SAN switch/director with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-DYNAMIC-PORT-VSAN-MIB::cdpvmDiffConfig OID value, configure state conditions and alerts, and monitor any Cisco MDS Fibre Channel SAN switch/director from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.421 | ciscoDpvmMIB | CISCO-DYNAMIC-PORT-VSAN-MIB |
| 1.3.6.1.4.1.9.9.421.1 | ciscoDpvmMIBObjects | CISCO-DYNAMIC-PORT-VSAN-MIB |
| 1.3.6.1.4.1.9.9.421.1.1 | cdpvmConfiguration | CISCO-DYNAMIC-PORT-VSAN-MIB |
| 1.3.6.1.4.1.9.9.421.1.1.9 | cdpvmDiffConfig | CISCO-DYNAMIC-PORT-VSAN-MIB |