| OID symbolic | OID numeric | Type | Access | Description |
|---|
| atiVlan | 1.3.6.1.4.1.207.8.12.2.4 | | | Atkk Virtual LAN objects |
| atiVlanGroup | 1.3.6.1.4.1.207.8.12.2.4.1 | | | |
| atiVlanIfTable | 1.3.6.1.4.1.207.8.12.2.4.1.2 | | not-accessible | This table lists VLAN interfaces that exist within
a device. A single entry exists in this list for each
VLAN interface in the system. A VLAN interface may
be created, destroyed and/or mapped to a globally identified
vlan. |
| atiVlanIfEntry | 1.3.6.1.4.1.207.8.12.2.4.1.2.1 | | not-accessible | An individual VLAN interface entry. When an NMS wishes
to create a new entry in this table, it must obtain a
non-zero index from the atiNextAvailableVirtIfIndex
object. Row creation in this table will fail if the
chosen index value does not match the current value
returned from the atiNextAvailableVirtIfIndex object. |
| INT atiVlanIfIndex | 1.3.6.1.4.1.207.8.12.2.4.1.2.1.1 | INTEGER | read-write | The index value of this row and the vlan's ifIndex in the
ifTable. The NMS obtains the index value for this row by
reading the atiNextAvailableVirtIfIndex object. |
| STR atiVlanIfDescr | 1.3.6.1.4.1.207.8.12.2.4.1.2.1.2 | DisplayString | read-write | This is a description of the VLAN interface. |
| ATI atiVlanIfType | 1.3.6.1.4.1.207.8.12.2.4.1.2.1.3 | AtiSwitchVlanType | read-write | The VLAN interface type. |
| INT atiVlanIfGlobalIdentifier | 1.3.6.1.4.1.207.8.12.2.4.1.2.1.4 | INTEGER | read-write | An administratively assigned global VLAN identifier.
The binding between a global identifier and a VLAN
interface can be created or removed. To create a binding
an NMS must write a non-zero value to this object. To
delete a binding, the NMS must write a zero to this
object. The value 1 is reserved for the default VLAN and
this cannot be deleted or re-assigned. |
| ROW atiVlanIfStatus | 1.3.6.1.4.1.207.8.12.2.4.1.2.1.6 | RowStatus | read-write | The status column for this VLAN interface.
This OBJECT can be set to:
active(1)
createAndGo(4)
createAndWait(5)
destroy(6)
The following values may be read:
active(1)
notInService(2)
notReady(3).
Setting this object to createAndGo(4) causes the agent
to attempt to create and commit the row based on
the contents of the objects in the row. If all necessary
information is present in the row and the values are
acceptible to the agent, the agent will change the
status to active(1). If any of the necessary objects
are not available, the agent will reject the creation
request.
Setting this object to createAndWait(5) causes a row
in this table to be created. The agent sets the
status to notInService(2) if all of the information is
present in the row and the values are acceptable to the
agent; otherwise, the agent sets the status to
notReady(3).
Setting this object to active(1) is only valid when
the current status is active(1) or notInService(2).
When the state of the row transitions is set to active(1),
the agent creates the corresponding row in the ifTable..
Setting this object to destroy(6) will remove the corresponding
VLAN interface, remove the entry in this table, and the
corresponding entries in the ifTable.
In order for a set of this object to destroy(6) to succeed,
all dependencies on this row must have been removed. These
will include any stacking dependencies in the ifStackTable and
any protocol specific tables dependencies. |
| atiVirtualGroup | 1.3.6.1.4.1.207.8.12.2.4.2 | | | |
| INT atiNextAvailableVirtIfIndex | 1.3.6.1.4.1.207.8.12.2.4.2.1 | INTEGER | read-only | The value of the next available virtual ifIndex. This
object is used by an NMS to select an index value
for row-creation in tables indexed by ifIndex. The
current value of this object is changed to a new
value when the current value is written to an agent's
table, that is indexed by ifIndex. Row creation
using the current value of this object, allocates
a virtual ifIndex. Note the following:
1. A newly created row does not have to be active(1)
for the agent to allocate the virtual ifIndex.
2. Race conditions between multiple NMS's end when
a row is created. Rows are deemed created when
a setRequest is successfully committed (i.e.
the errorStats is noError(0)).
3. An agent that exhausts its supply of virual
ifIndex values returns zero as the value of this
object. This can be used by an NMS as an indication
to deleted unused rows and reboot the device. |
| atiEncapsulationGroup | 1.3.6.1.4.1.207.8.12.2.4.3 | | | |
| atiVlanEncapsIfTable | 1.3.6.1.4.1.207.8.12.2.4.3.1 | | not-accessible | This table lists VLAN encapsulation interfaces that
exist within a device. A single entry exists in this
list for each VLAN encapsulation interface in the
system. A VLAN encapsulation interface may be created
or destroyed. |
| atiVlanEncapsIfEntry | 1.3.6.1.4.1.207.8.12.2.4.3.1.1 | | not-accessible | An individual VLAN encapsulation interface entry.
When an NMS wishes to create a new entry in this table,
it must obtain a non-zero index from the
atiNextAvailableVirtIfIndex object. Row creation in
this table will fail if the chosen index value does
not match the current value returned from the
atiNextAvailableVirtIfIndex object. |
| INT atiVlanEncapsIfIndex | 1.3.6.1.4.1.207.8.12.2.4.3.1.1.1 | INTEGER | read-write | The index value of this row and the encapsulation
interface's ifIndex in the ifTable. The NMS obtains
the index value used for creating a row in this table
by reading the atiNextAvailableVirtIfIndex object. |
| ATI atiVlanEncapsIfType | 1.3.6.1.4.1.207.8.12.2.4.3.1.1.2 | AtiSwitchVlanEncapsType | read-write | The encapsulation algorithm used when encapsulating
packets transmitted, or de-encapsulating packets
received through this interface. |
| INT atiVlanEncapsIfTag | 1.3.6.1.4.1.207.8.12.2.4.3.1.1.3 | INTEGER | read-write | The tag used when encapsulating packets transmitted,
or de-encapsulating packets received through this
interface. |
| ROW atiVlanEncapsIfStatus | 1.3.6.1.4.1.207.8.12.2.4.3.1.1.4 | RowStatus | read-write | The row status for this VLAN encapsulation interface.
This OBJECT can be set to:
active(1)
createAndGo(4)
createAndWait(5)
destroy(6)
The following values may be read:
active(1)
notReady(3).
In order for a row to become active, the NMS must set
atiVlanEncapsIfTagType and atiVlanEncapsIfTag to
some valid and consistent values.
Setting this object to createAndGo(4) causes the agent
to attempt to create and commit the row based on the
contents of the objects in the row. If all necessary
information is present in the row, the agent will
create the row and change the status to active(1). If
any of the necessary objects are not available, or
specify an invalid configuration, the row will not be
created and the agent will return an appropriate error.
Setting this object to createAndWait(5) causes a row in
in this table to be created. If all necessary objects
in the row have been assigned values and specify a valid
configuration, the status of the row will be set to
notInService(2); otherwise, the status will be set to
notReady(3).
This object may only be set to createAndGo(4) or
createAndWait(5) if it does not exist.
Setting this object to active(1) when the status is
notInService(2) causes the agent to commit the
row. Setting this object to active(1) when its value
is already active(1) is a no-op.
Setting this object to destroy(6) will remove the
corresponding VLAN encapsulation interface, remove the
entry in this table, and remove the corresponding entry
in the ifTable.
In order for a set of this object to destroy(6) to
succeed, all dependencies on this row must have been
removed. These will include any references to this
interface in the ifStackTable. |
| atiProtocolGroup | 1.3.6.1.4.1.207.8.12.2.4.5 | | | |
| atiVlanProtocolTable | 1.3.6.1.4.1.207.8.12.2.4.5.1 | | not-accessible | Table of defined combinations of protocol IDs
that make up one protocol definition name.
All members of one protocol definition share
the same atiVlanProtocolIndex. A given
protocol ID may appear in the definition of
just one protocol definition. This table will
typically contain some default entries for
popular protocols. |
| atiVlanProtocolEntry | 1.3.6.1.4.1.207.8.12.2.4.5.1.1 | | not-accessible | One member protocol ID of a protocol definition. |
| INT atiVlanProtocolIndex | 1.3.6.1.4.1.207.8.12.2.4.5.1.1.1 | INTEGER | read-write | An index representing a protocol grouping of
protocol ID values. A limited number of
protocol groupings may be defined (up to 7). |
| INT atiVlanProtocolIdIndex | 1.3.6.1.4.1.207.8.12.2.4.5.1.1.2 | INTEGER | read-write | An index representing a particular protocol ID
within a protocol grouping. A limited number of
protocol IDs may be defined per
atiVlanProtocolIndex (up to 6). |
| STR atiVlanProtocolName | 1.3.6.1.4.1.207.8.12.2.4.5.1.1.3 | DisplayString | read-write | A human-readable string representing this protocol.
This string should be the same for all entries
sharing a given atiVlanProtocolIndex.
A atiVlanProtocolEntry with
atiVlanProtocolName of ANY represents a match
on all protocols: this entry may not be modified. |
| INT atiVlanProtocolDllEncapsType | 1.3.6.1.4.1.207.8.12.2.4.5.1.1.4 | INTEGER | read-write | Represents the type of data-link encapsulation
in which the atiVlanProtocolId protocol ID
is carried. The value any(1) is used to indicate
a wildcard and matches all encapsulations and
protocol IDs that are not explicitly mentioned
in this table. Entries of type any(1) may not
be created. The value none(5) is used to indicate
that no protocol IDs match this entry. A value
of none(5) may not be set by a manager. |
| INT atiVlanProtocolId | 1.3.6.1.4.1.207.8.12.2.4.5.1.1.5 | INTEGER | read-write | The protocol ID: for entries of type ethertype(2)
or llcSnapEthertype(4) this represents a 16-bit
protocol ID. For entries of type llc(3) it
represents a concatenation of LLC DSAP+SSAP in
network byte order. This value is not valid
for atiVlanProtocolDllEncapsType values of
any(1) or none(5). |
| ROW atiVlanProtocolStatus | 1.3.6.1.4.1.207.8.12.2.4.5.1.1.6 | RowStatus | read-write | The row status variable, used according to
row installation and removal conventions. |
| atiVlanProtocolVlanTable | 1.3.6.1.4.1.207.8.12.2.4.5.2 | | not-accessible | Table to apply one of the protocol definitions
in atiVlanProtocolTable to a given VLAN
This applies to all ports that are untagged
in this VLAN). A limited number of protocols
may be applied simultaneously in one device (up to 8). |
| atiVlanProtocolVlanEntry | 1.3.6.1.4.1.207.8.12.2.4.5.2.1 | | not-accessible | A mapping of untagged packets of one protocol
onto a particular VLAN. |
| INT atiVlanProtocolVlanIfIndex | 1.3.6.1.4.1.207.8.12.2.4.5.2.1.1 | INTEGER | read-write | The index value of this row and the vlan's ifIndex in the
ifTable. The NMS obtains the index value for this row by
reading the atiNextAvailableVirtIfIndex object. |
| INT atiVlanProtocolVlanProtocolIndex | 1.3.6.1.4.1.207.8.12.2.4.5.2.1.2 | INTEGER | read-write | An index representing a protocol grouping of
protocol ID values. A limited number of
protocol groupings may be defined (up to 7). |
| ROW atiVlanProtocolVlanStatus | 1.3.6.1.4.1.207.8.12.2.4.5.2.1.3 | RowStatus | read-write | The row status variable, used according to
row installation and removal conventions. |
