All MIBs › CENTRECOM-VLAN-MIB › atiVlanProtocolDllEncapsType
atiVlanProtocolDllEncapsType
Module: CENTRECOM-VLAN-MIB
OID (symbolic): CENTRECOM-VLAN-MIB::atiVlanProtocolDllEncapsType
OID (numeric): 1.3.6.1.4.1.207.8.12.2.4.5.1.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Represents the type of data-link encapsulation in which the atiVlanProtocolId protocol ID is carried. The value any(1) is used to indicate a wildcard and matches all encapsulations and protocol IDs that are not explicitly mentioned in this table. Entries of type any(1) may not be created. The value none(5) is used to indicate that no protocol IDs match this entry. A value of none(5) may not be set by a manager.
What is atiVlanProtocolDllEncapsType?
This specifies the data-link-layer encapsulation format, EtherType framing, raw LLC, or LLC-SNAP-wrapped EtherType, in which the protocol ID for this entry is expected to appear on the wire, with any(1) reserved as a system wildcard that matches unlisted combinations and can't be manually created by an admin. The same numeric protocol ID means something different depending on which encapsulation carries it, so getting this wrong causes the switch to misclassify or fail to match legitimate protocol-based VLAN traffic. An admin defining a rule for classic Ethernet IP traffic would choose ethertype(2), while one matching an old Token Ring-style LLC-encoded protocol would need llc(3) instead.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.207.8.12.2.4.5.1.1.4 snmpwalk -v2c -c public <target> CENTRECOM-VLAN-MIB::atiVlanProtocolDllEncapsType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.207.8.12.2.4.5.1.1.4.1 snmpget -v2c -c public <target> CENTRECOM-VLAN-MIB::atiVlanProtocolDllEncapsType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.207.8.12.2.4.5.1.1.4.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> atiVlanProtocolDllEncapsType.1
Start monitoring Allied Telesis CentreCOM Ethernet switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CENTRECOM-VLAN-MIB::atiVlanProtocolDllEncapsType OID value, configure state conditions and alerts, and monitor any Allied Telesis CentreCOM Ethernet switches from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.207 | alliedTelesyn | AT-RG600-MIB |
| 1.3.6.1.4.1.207.8 | mibObject | AT-RG600-MIB |
| 1.3.6.1.4.1.207.8.12 | atkkSwitchMIB | CENTRECOM-MIB |
| 1.3.6.1.4.1.207.8.12.2 | extSwitchMIB | CENTRECOM-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.207.8.12.2.4 | atiVlan | CENTRECOM-VLAN-MIB |
| 1.3.6.1.4.1.207.8.12.2.4.5 | atiProtocolGroup | CENTRECOM-VLAN-MIB |
| 1.3.6.1.4.1.207.8.12.2.4.5.1 | atiVlanProtocolTable | CENTRECOM-VLAN-MIB |
| 1.3.6.1.4.1.207.8.12.2.4.5.1.1 | atiVlanProtocolEntry | CENTRECOM-VLAN-MIB |
| 1.3.6.1.4.1.207.8.12.2.4.5.1.1.4 | atiVlanProtocolDllEncapsType | CENTRECOM-VLAN-MIB |