All MIBs › BLADETYPE2-NETWORK-MIB › ripCurCfgIntfTrigUpdate
ripCurCfgIntfTrigUpdate
Module: BLADETYPE2-NETWORK-MIB
OID (symbolic): BLADETYPE2-NETWORK-MIB::ripCurCfgIntfTrigUpdate
OID (numeric): 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.1.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Enable or disable tirggered updates.
What is ripCurCfgIntfTrigUpdate?
Shows whether triggered updates are enabled on this interface, a RIP feature that immediately sends a partial route update when a route change is detected rather than waiting for the next periodic update. This speeds up convergence after topology changes.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.1.1.6 snmpwalk -v2c -c public <target> BLADETYPE2-NETWORK-MIB::ripCurCfgIntfTrigUpdate
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.1.1.6.1 snmpget -v2c -c public <target> BLADETYPE2-NETWORK-MIB::ripCurCfgIntfTrigUpdate.1
Start monitoring HP BladeSystem Type 2 embedded network switch modules with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BLADETYPE2-NETWORK-MIB::ripCurCfgIntfTrigUpdate OID value, configure state conditions and alerts, and monitor any HP BladeSystem Type 2 embedded network switch modules from a single console.
OID Breakdown
Upper-level ancestors (14 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3 | hpsystem | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.7 | netElement | HP-ICF |
| 1.3.6.1.4.1.11.2.3.7.11 | hpEtherSwitch | HP-ICF-OID |
| 1.3.6.1.4.1.11.2.3.7.11.33 | hpSwitchProliant | HP-ICF-OID |
| 1.3.6.1.4.1.11.2.3.7.11.33.1 | hpSwitchModuleBladetype2 | HP-SWITCH-PL-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.33.1.2 | hpSwitchBladeType2_Mgmt | HP-SWITCH-PL-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3 | layer3 | BLADETYPE2-NETWORK-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1 | layer3Configs | BLADETYPE2-NETWORK-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18 | rip2Cfg | BLADETYPE2-NETWORK-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.1 | ripCurCfgIntfTable | BLADETYPE2-NETWORK-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.1.1 | ripCurCfgIntfEntry | BLADETYPE2-NETWORK-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.1.1.6 | ripCurCfgIntfTrigUpdate | BLADETYPE2-NETWORK-MIB |