All MIBs › BLADETYPE2-NETWORK-MIB › ospfNewCfgRipOutRmapList

ospfNewCfgRipOutRmapList

OID (symbolic): BLADETYPE2-NETWORK-MIB::ospfNewCfgRipOutRmapList

OID (numeric): 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.4.5.6

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-only

Description: The route maps present in the out route map list. 
The route maps are presented in a bitmap format.

in receiving order:

OCTET 1  OCTET 2  .....
xxxxxxxx xxxxxxxx .....
||    || |_ Rmap 9
||    ||
||    ||___ Rmap 8
||    |____ Rmap 7
||      .    .   .
||_________ Rmap 2
|__________ Rmap 1

where x : 1 - The represented route map is selected
0 - The represented route map is not selected

What is ospfNewCfgRipOutRmapList?

Reports the pending (new) set of route maps to be applied to outbound RIP routes as a bitmap, reflecting changes not yet applied to the active configuration.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.4.5.6
snmpwalk -v2c -c public <target> BLADETYPE2-NETWORK-MIB::ospfNewCfgRipOutRmapList

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.4.5.6.1
snmpget -v2c -c public <target> BLADETYPE2-NETWORK-MIB::ospfNewCfgRipOutRmapList.1

Start monitoring HP BladeSystem Type 2 embedded network switch modules with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BLADETYPE2-NETWORK-MIB::ospfNewCfgRipOutRmapList OID value, configure state conditions and alerts, and monitor any HP BladeSystem Type 2 embedded network switch modules from a single console.

OID Breakdown

Upper-level ancestors (14 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.11	hp	CLJ8500-MIB
1.3.6.1.4.1.11.2	nm	CLJ8500-MIB
1.3.6.1.4.1.11.2.3	hpsystem	CLJ8500-MIB
1.3.6.1.4.1.11.2.3.7	netElement	HP-ICF
1.3.6.1.4.1.11.2.3.7.11	hpEtherSwitch	HP-ICF-OID
1.3.6.1.4.1.11.2.3.7.11.33	hpSwitchProliant	HP-ICF-OID
1.3.6.1.4.1.11.2.3.7.11.33.1	hpSwitchModuleBladetype2	HP-SWITCH-PL-MIB
1.3.6.1.4.1.11.2.3.7.11.33.1.2	hpSwitchBladeType2_Mgmt	HP-SWITCH-PL-MIB

Numeric OID	Name	Module
1.3.6.1.4.1.11.2.3.7.11.33.1.2.3	layer3	BLADETYPE2-NETWORK-MIB
1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1	layer3Configs	BLADETYPE2-NETWORK-MIB
1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13	ospfCfg	BLADETYPE2-NETWORK-MIB
1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.4	ospfRouteRedistribution	BLADETYPE2-NETWORK-MIB
1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.4.5	ospfRedistributeRip	BLADETYPE2-NETWORK-MIB
1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.13.4.5.6	ospfNewCfgRipOutRmapList	BLADETYPE2-NETWORK-MIB

BLADETYPE2-NETWORK-MIB :: ospfNewCfgRipOutRmapList

ospfNewCfgRipOutRmapList

Module

This MIB depends on