All MIBs › BLADETYPE2-NETWORK-MIB › rip2CurCfgState
rip2CurCfgState
Module: BLADETYPE2-NETWORK-MIB
OID (symbolic): BLADETYPE2-NETWORK-MIB::rip2CurCfgState
OID (numeric): 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.3.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: RIP global state.
What is rip2CurCfgState?
Reports the current global operational state of the RIP routing protocol on the device, indicating whether RIP is globally enabled or disabled across all interfaces. This reflects the active running configuration.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.3.1 snmpwalk -v2c -c public <target> BLADETYPE2-NETWORK-MIB::rip2CurCfgState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.3.1.1 snmpget -v2c -c public <target> BLADETYPE2-NETWORK-MIB::rip2CurCfgState.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> rip2CurCfgState.1
Start monitoring HP BladeSystem Type 2 embedded network switch modules with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BLADETYPE2-NETWORK-MIB::rip2CurCfgState OID value, configure state conditions and alerts, and monitor any HP BladeSystem Type 2 embedded network switch modules from a single console.
OID Breakdown
Upper-level ancestors (14 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3 | hpsystem | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.7 | netElement | HP-ICF |
| 1.3.6.1.4.1.11.2.3.7.11 | hpEtherSwitch | HP-ICF-OID |
| 1.3.6.1.4.1.11.2.3.7.11.33 | hpSwitchProliant | HP-ICF-OID |
| 1.3.6.1.4.1.11.2.3.7.11.33.1 | hpSwitchModuleBladetype2 | HP-SWITCH-PL-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.33.1.2 | hpSwitchBladeType2_Mgmt | HP-SWITCH-PL-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3 | layer3 | BLADETYPE2-NETWORK-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1 | layer3Configs | BLADETYPE2-NETWORK-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18 | rip2Cfg | BLADETYPE2-NETWORK-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.3 | ripGeneral | BLADETYPE2-NETWORK-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.18.3.1 | rip2CurCfgState | BLADETYPE2-NETWORK-MIB |