All MIBs › BLADETYPE2-NETWORK-MIB › igmpSnoopNewCfgVlanBmap

igmpSnoopNewCfgVlanBmap

OID (symbolic): BLADETYPE2-NETWORK-MIB::igmpSnoopNewCfgVlanBmap

OID (numeric): 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.3.1.22

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-only

Description: The snooping vlans present in the in vlan map list.
The snooping vlans are presented in a bitmap format.

in receiving order:

OCTET 1  OCTET 2  .....
xxxxxxxx xxxxxxxx .....
||    || |_ Vlan 9
||    ||
||    ||___ Vlan 8
||    |____ Vlan 7
||      .    .   .
||_________ Vlan 2
|__________ Vlan 1

where x : 1 - The represented vlan has snoop enabled
0 - The represented vlan does not have snooping enabled.

What is igmpSnoopNewCfgVlanBmap?

Reports the set of VLANs configured for IGMP snooping in the new (pending) configuration as a bitmap, where each bit corresponds to a VLAN number. This reflects the desired state after the pending configuration is applied.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.3.1.22
snmpwalk -v2c -c public <target> BLADETYPE2-NETWORK-MIB::igmpSnoopNewCfgVlanBmap

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.3.1.22.1
snmpget -v2c -c public <target> BLADETYPE2-NETWORK-MIB::igmpSnoopNewCfgVlanBmap.1

Start monitoring HP BladeSystem Type 2 embedded network switch modules with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BLADETYPE2-NETWORK-MIB::igmpSnoopNewCfgVlanBmap OID value, configure state conditions and alerts, and monitor any HP BladeSystem Type 2 embedded network switch modules from a single console.

OID Breakdown

Upper-level ancestors (14 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.11	hp	CLJ8500-MIB
1.3.6.1.4.1.11.2	nm	CLJ8500-MIB
1.3.6.1.4.1.11.2.3	hpsystem	CLJ8500-MIB
1.3.6.1.4.1.11.2.3.7	netElement	HP-ICF
1.3.6.1.4.1.11.2.3.7.11	hpEtherSwitch	HP-ICF-OID
1.3.6.1.4.1.11.2.3.7.11.33	hpSwitchProliant	HP-ICF-OID
1.3.6.1.4.1.11.2.3.7.11.33.1	hpSwitchModuleBladetype2	HP-SWITCH-PL-MIB
1.3.6.1.4.1.11.2.3.7.11.33.1.2	hpSwitchBladeType2_Mgmt	HP-SWITCH-PL-MIB

Numeric OID	Name	Module
1.3.6.1.4.1.11.2.3.7.11.33.1.2.3	layer3	BLADETYPE2-NETWORK-MIB
1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1	layer3Configs	BLADETYPE2-NETWORK-MIB
1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15	igmpCfg	BLADETYPE2-NETWORK-MIB
1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.3	igmpSnoopCfgGen	BLADETYPE2-NETWORK-MIB
1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.3.1	igmpSnoopCfg	BLADETYPE2-NETWORK-MIB
1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.15.3.1.22	igmpSnoopNewCfgVlanBmap	BLADETYPE2-NETWORK-MIB

BLADETYPE2-NETWORK-MIB :: igmpSnoopNewCfgVlanBmap

igmpSnoopNewCfgVlanBmap

Module

This MIB depends on