All MIBs › BLADETYPE2-NETWORK-MIB › ripNewCfgState
ripNewCfgState
Module: BLADETYPE2-NETWORK-MIB
OID (symbolic): BLADETYPE2-NETWORK-MIB::ripNewCfgState
OID (numeric): 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.5.12
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Globally turn RIP on or off.
What is ripNewCfgState?
Controls the global on/off switch for the RIP routing protocol in the pending configuration. Setting this to enabled will activate RIP on the switch once the new configuration is applied.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.5.12 snmpwalk -v2c -c public <target> BLADETYPE2-NETWORK-MIB::ripNewCfgState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.5.12.1 snmpget -v2c -c public <target> BLADETYPE2-NETWORK-MIB::ripNewCfgState.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.5.12.1 i <value>
Start monitoring HP BladeSystem Type 2 embedded network switch modules with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BLADETYPE2-NETWORK-MIB::ripNewCfgState OID value, configure state conditions and alerts, and monitor any HP BladeSystem Type 2 embedded network switch modules from a single console.
OID Breakdown
Upper-level ancestors (14 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3 | hpsystem | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.7 | netElement | HP-ICF |
| 1.3.6.1.4.1.11.2.3.7.11 | hpEtherSwitch | HP-ICF-OID |
| 1.3.6.1.4.1.11.2.3.7.11.33 | hpSwitchProliant | HP-ICF-OID |
| 1.3.6.1.4.1.11.2.3.7.11.33.1 | hpSwitchModuleBladetype2 | HP-SWITCH-PL-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.33.1.2 | hpSwitchBladeType2_Mgmt | HP-SWITCH-PL-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3 | layer3 | BLADETYPE2-NETWORK-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1 | layer3Configs | BLADETYPE2-NETWORK-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.5 | ripCfg | BLADETYPE2-NETWORK-MIB |
| 1.3.6.1.4.1.11.2.3.7.11.33.1.2.3.1.5.12 | ripNewCfgState | BLADETYPE2-NETWORK-MIB |