BIANCA-X8000-MIBSYS-MIB

All MIBs › BIANCA-X8000-MIBSYS-MIB

Category: Textual Conventions and Registries, Vendor: bintec

Description: Provides system management objects for bintec elmeg BIANCA X8000 series broadband router devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is BIANCA-X8000-MIBSYS-MIB?

BIANCA-X8000-MIBSYS-MIB is a bintec elmeg enterprise MIB providing general system management objects for the BIANCA X8000 series broadband router. It exposes core system-level identity and status data for the device, in the style of a vendor system MIB (akin to a vendor-specific analogue of the standard SNMPv2-MIB system group). Such a module is typically used to monitor basic device software/hardware status — things like system uptime, device identification, and configuration state — for the X8000 platform. No sample objects or module description are available in the provided material to confirm specific object names or dependencies on other MIBs. It's deployed on bintec elmeg BIANCA X8000 series broadband routers used as small/medium business gateway devices. Engineers can download the BIANCA-X8000-MIBSYS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in BIANCA-X8000-MIBSYS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

bintec elmeg BIANCA X8000 series broadband router

Monitoring Examples

No sample_objects were provided for this module, so no concrete object/table names from the input can ground a specific polling example. In general, an operator would expect to poll basic system objects (e.g., system uptime, device identity, firmware version) typical of a vendor system MIB, but the exact object names for the X8000 platform are not available in the provided material.

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

Counter
enterprises

From RFC1158-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
bintec	1.3.6.1.4.1.272
bibo	1.3.6.1.4.1.272.4
sys	1.3.6.1.4.1.272.4.17
x8	1.3.6.1.4.1.272.4.17.3
sysX8Config	1.3.6.1.4.1.272.4.17.3.1
INT sysX8ConfigPowerSupply1State	1.3.6.1.4.1.272.4.17.3.1.1	INTEGER	read-only	This variable shows the state of the power supply.
INT sysX8ConfigPowerSupply1Temp	1.3.6.1.4.1.272.4.17.3.1.2	INTEGER	read-only	This variable shows the actual power supply temperature in the unit Celsius.
INT sysX8ConfigPowerSupply1TempAlarmThreshold	1.3.6.1.4.1.272.4.17.3.1.3	INTEGER	read-write	Power supply 1 temperature threshold.
INT sysX8ConfigPowerSupply1TempAlarmTrap	1.3.6.1.4.1.272.4.17.3.1.4	INTEGER	read-only	If the power supply temperature raises above the threshold, a alarm trap is generated every 60 seconds.
INT sysX8ConfigPowerSupply2State	1.3.6.1.4.1.272.4.17.3.1.5	INTEGER	read-only	This variable show the the state of the power supply.
INT sysX8ConfigPowerSupply2Temp	1.3.6.1.4.1.272.4.17.3.1.6	INTEGER	read-only	This variable shows the actual power supply temperature in the unit Celsius.
INT sysX8ConfigPowerSupply2TempAlarmThreshold	1.3.6.1.4.1.272.4.17.3.1.7	INTEGER	read-write	Power supply 2 temperature threshold.
INT sysX8ConfigPowerSupply2TempAlarmTrap	1.3.6.1.4.1.272.4.17.3.1.8	INTEGER	read-only	If the power supply temperature raises above the threshold, a alarm trap is generated every 60 seconds.
INT sysX8ConfigFanControl	1.3.6.1.4.1.272.4.17.3.1.9	INTEGER	read-write	This variable defines automatic fan control. In mode 'auto' the fans are automatically adjusted depending on the current temperature. In mode 'high' all fans remain at maximum speed.
STR sysX8ConfigFanVersion	1.3.6.1.4.1.272.4.17.3.1.10	DisplayString	read-only	This variable shows the firmware version of the fan unit.
INT sysX8ConfigFan1	1.3.6.1.4.1.272.4.17.3.1.11	INTEGER	read-only	This variable shows the current turning speed.
INT sysX8ConfigFan2	1.3.6.1.4.1.272.4.17.3.1.12	INTEGER	read-only	This variable shows the current turning speed.
INT sysX8ConfigFan3	1.3.6.1.4.1.272.4.17.3.1.13	INTEGER	read-only	This variable shows the current turning speed.
INT sysX8ConfigFan4	1.3.6.1.4.1.272.4.17.3.1.14	INTEGER	read-only	This variable shows the current turning speed.
sysX8Traps	1.3.6.1.4.1.272.4.17.3.2
NTF sysX8TrapPowerSupply1Missing	1.3.6.1.4.1.272.4.17.3.2.0.1			This trap signifies that the power supply 1 has been removed
NTF sysX8TrapPowerSupply1PowerOff	1.3.6.1.4.1.272.4.17.3.2.0.2			This trap signifies that the power supply 1 has no power-good signal (no power input)
NTF sysX8TrapPowerSupply1PowerFail	1.3.6.1.4.1.272.4.17.3.2.0.3			This trap signifies that the power supply 1 has been in the failure (bad DC output)
NTF sysX8TrapPowerSupply1PowerGood	1.3.6.1.4.1.272.4.17.3.2.0.4			This trap signifies that the power supply 1 is running (supplying power)
NTF sysX8TrapPowerSupply1TempCritical	1.3.6.1.4.1.272.4.17.3.2.0.5			This trap signifies that the power supply 1 temperature raises above the critical alarm-threshold
NTF sysX8TrapPowerSupply1TempOk	1.3.6.1.4.1.272.4.17.3.2.0.6			A normal power supply 1 temperature has been restored.
NTF sysX8TrapPowerSupply2Missing	1.3.6.1.4.1.272.4.17.3.2.0.7			This trap signifies that the power supply 2 has been removed
NTF sysX8TrapPowerSupply2PowerOff	1.3.6.1.4.1.272.4.17.3.2.0.8			This trap signifies that the power supply 2 has no power-good signal (no power input)
NTF sysX8TrapPowerSupply2PowerFail	1.3.6.1.4.1.272.4.17.3.2.0.9			This trap signifies that the power supply 2 has been in the failure (bad DC output)
NTF sysX8TrapPowerSupply2PowerGood	1.3.6.1.4.1.272.4.17.3.2.0.10			This trap signifies that the power supply 2 is running (supplying power)
NTF sysX8TrapPowerSupply2TempCritical	1.3.6.1.4.1.272.4.17.3.2.0.11			This trap signifies that the power supply 2 temperature raises above the critical alarm-threshold
NTF sysX8TrapPowerSupply2TempOk	1.3.6.1.4.1.272.4.17.3.2.0.12			A normal power supply 2 temperature has been restored.

RFC description

Monitors power supply status, temperature, and trap events on Bianca X8000 router systems.

Start monitoring bintec elmeg BIANCA X8000-series broadband router (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download BIANCA-X8000-MIBSYS-MIB

What Is BIANCA-X8000-MIBSYS-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description