| OID symbolic | OID numeric | Type | Access | Description |
|---|
| org | 1.3 | | | |
| dod | 1.3.6 | | | |
| internet | 1.3.6.1 | | | |
| private | 1.3.6.1.4 | | | |
| enterprises | 1.3.6.1.4.1 | | | |
| bintec | 1.3.6.1.4.1.272 | | | |
| bibo | 1.3.6.1.4.1.272.4 | | | |
| x25 | 1.3.6.1.4.1.272.4.6 | | | |
| x25PadProfileTable | 1.3.6.1.4.1.272.4.6.8 | | not-accessible | This Table contains entries for the pad profiles. For PPP
connections, pad profiles are assigned to incoming connections
via the isdnDispatchTable. For outgoing connections, the
profile is assigned by the biboPppTable. Profile 0 is used as
default profile for ppp. |
| x25PadProfileEntry | 1.3.6.1.4.1.272.4.6.8.1 | | not-accessible | Entries can only be created and deleted manually. |
| INT x25PadProNumber | 1.3.6.1.4.1.272.4.6.8.1.1 | INTEGER | read-write | The unique number of the profile. |
| INT x25PadProState | 1.3.6.1.4.1.272.4.6.8.1.2 | INTEGER | read-write | The State of the profile. |
| STR x25PadProAutoCallDstAddr | 1.3.6.1.4.1.272.4.6.8.1.3 | DisplayString | read-write | When this object is set to a non-empty string, a
call will automatically be established to this
PAD address. |
| INT x25PadProEscape | 1.3.6.1.4.1.272.4.6.8.1.4 | INTEGER | read-write | The value of the parameter one. This parameter defines a
character on its receipt the PAD alternates the state
from data-transfer in connection-in-progress. This allows the
start-stop mode DTE to initiate an escape from the
data-transfer state or the connection-in-progress state in
order to send PAD command signals. The value 0 means that
the escape from data-transfer state and recall of the PAD is
not possible. The value 1 means that the escape is possible by
character DLE(Ctrl-P). The values 32-126 mean that the escape
is possible by graphic character defined by the user. |
| INT x25PadProEcho | 1.3.6.1.4.1.272.4.6.8.1.5 | INTEGER | read-write | The value of the parameter two. This parameter determines
whether the echo mode is off or on. The selection of the
characters to be echoed is dependent on the value of
parameter EchoMask. |
| INT x25PadProForwardChar | 1.3.6.1.4.1.272.4.6.8.1.6 | INTEGER | read-write | The value of the parameter three. This parameter defines a
character. On its receipt the PAD forwards the previously
received data from start-stop DTE as packet. The value 0 means
no data forwarding character. |
| INT x25PadProIdleTimer | 1.3.6.1.4.1.272.4.6.8.1.7 | INTEGER | read-write | The value of parameter four. This parameter allows the
selection of the duration of an interval between successive
characters received from the start-stop DTE which, when
exceeded, will cause the PAD to terminate the assembly of
a packet and to forward it. The value 0 will indicate that
no data forwarding on time-out is required. A value between
1 and 255 will indicate the value of the delay in twentieths
of a second. |
| INT x25PadProDevControl | 1.3.6.1.4.1.272.4.6.8.1.8 | INTEGER | read-write | The value of the parameter five. This parameter allows for
flow control between the PAD and the start-stop DTE. The PAD
indicates whether it is ready or not to accept characters
from the start-stop DTE by transmitting special characters.
These characters are used to switch an ancillary transmitting
device on (X-ON; DC1) and off (X-OFF; DC3). The value 0 means
no use of DC1 and DC3. Value 1 indicates the use of DC1 and
DC3 on data-transfer. Value 2 means the use of DC1 and DC3 on
data-transfer and command state. |
| INT x25PadProSigControl | 1.3.6.1.4.1.272.4.6.8.1.9 | INTEGER | read-write | The value of the parameter six. This parameter provides the
start-stop DTE with the ability to decide whether or not and
in what format PAD service signals are transmitted. The value
0 means no service signals are transmitted to the start-stop
DTE. Value 1 indicates service signals other than the prompt
PAD service signal are transmitted in the standard format. The
value 4 indicates prompt PAD service signal is transmitted in
the standard format. The value 5 is a combination of value 1
and value 4, i.e. all service signals including prompt are
transmitted in standard format. The transmission of service
signals is controlled by values 0, 1, 4, 5. |
| INT x25PadProBrkControl | 1.3.6.1.4.1.272.4.6.8.1.10 | INTEGER | read-write | The value of the parameter seven. This parameter allows the
selection of the operation of the PAD after the receipt of a
BREAK-signal from the start-stop DTE in data-transfer state.
The value 0 indicates no operation. Value 1 means that the
PAD sends an interrupt packet to packet mode DTE or other PAD.
Value 2 indicates RESET but the PAD remains in data-transfer
state. Value 4 means that the PAD sends an indication of a
BREAK-message to packet mode DTE or other PAD. Value 8
indicates escape from data-transfer state. Value 16 determines
discard output to start-stop DTE. |
| INT x25PadProDiscard | 1.3.6.1.4.1.272.4.6.8.1.11 | INTEGER | read-write | The value of the parameter eight. This parameter provides for
a PAD to discard the content of user sequences in packets upon
request rather than disassembling and transmitting these to
the start-stop DTE. |
| INT x25PadProCRPadding | 1.3.6.1.4.1.272.4.6.8.1.12 | INTEGER | read-write | The value of the parameter nine. This parameter provides for
the automatic insertion by the PAD of padding characters in
the character stream transmitted to the start-stop DTE after
the occurrence of a carriage return character. This allows
for the printing mechanism for the start-stop DTE to perform
the carriage return function correctly. A value between 0
and 255 will indicate the number of padding characters. When
this parameter is 0, there will be no padding except that PAD
service signals will contain a number of padding characters
according to the data rate of the start-stop DTE. |
| INT x25PadProLineFold | 1.3.6.1.4.1.272.4.6.8.1.13 | INTEGER | read-write | The value of the parameter ten. This parameter provides for
the automatic insertion by the PAD of appropriate format
effectors in the character stream transmitted to the
start-stop DTE. The predetermined maximum number of graphic
characters per line may be set. Tha value 0 means no line
folding. A value between 1 and 255 will indicate the number
of graphic characters per line that will be transmitted by
the PAD without inserting appropriate format effectors. |
| INT x25PadProFlowControl | 1.3.6.1.4.1.272.4.6.8.1.14 | INTEGER | read-write | The value of the parameter twelve. It allows for flow control
between the start-stop DTE and the PAD. The start-stop DTE
indicates whether it is ready or not to accept characters
from the PAD by transmitting special characters. |
| INT x25PadProLFInsert | 1.3.6.1.4.1.272.4.6.8.1.15 | INTEGER | read-write | The value of the parameter thirteen. It provides for the
automatic insertion by the PAD of a linefeed character in
the character stream to or from the start-stop DTE after
each carriage return character. It applies only in the
data-transfer state. |
| INT x25PadProLFPadding | 1.3.6.1.4.1.272.4.6.8.1.16 | INTEGER | read-write | The value of the parameter fourteen. It provides for the
automatic insertion by the PAD of padding characters in the
character stream transmitted to the start-stop DTE after the
occurrence of a linefeed character. It applies only in the
data-transfer state. A value between 0 and 255 will indicate
the number of padding characters. |
| INT x25PadProEdit | 1.3.6.1.4.1.272.4.6.8.1.17 | INTEGER | read-write | The value of the parameter fifteen. It determines, whether
editing of user data in data-transfer state is possible or
not. The value 1 suspends data forwarding on full packet
until the editing buffer is full and data forwarding on idle
timer period expiry. The value of parameter 4 remains
unchanged. During the PAD command state the editing function
is always available. |
| INT x25PadProCharDel | 1.3.6.1.4.1.272.4.6.8.1.18 | INTEGER | read-write | The value of the parameter sixteen. This parameter provides
for character delete editing capabilities in the data-transfer
state for the start-stop DTE. The character defined by the
user for character delete is the binary respresentation of the
decimal value in accordance with IA5. |
| INT x25PadProLineDel | 1.3.6.1.4.1.272.4.6.8.1.19 | INTEGER | read-write | The value of the parameter seventeen. This parameter provides
for line delete editing capabilities in the data-transfer
state for the start-stop DTE. The character defined by the
user for line delete is the binary respresentation of the
decimal value in accordance with IA5. |
| INT x25PadProLineDisp | 1.3.6.1.4.1.272.4.6.8.1.20 | INTEGER | read-write | The value of the parameter eighteen. This parameter provides
for line display editing capabilities in the data-transfer
state for the start-stop DTE. The character defined by the
user for line display is the binary respresentation of the
decimal value in accordance with IA5. |
| INT x25PadProSigEdit | 1.3.6.1.4.1.272.4.6.8.1.21 | INTEGER | read-write | The value of the parameter nineteen. It provides the start-
stop DTE with the ability to decide whether or not editing PAD
service signals are transmitted and which format should be
used. This parameter does not apply if the value of parameter
6 is set to 0. |
| INT x25PadProEchoMask | 1.3.6.1.4.1.272.4.6.8.1.22 | INTEGER | read-write | The value of the parameter twenty. When ECHO is enabled,
it allows selected defined sets of characters received from
the start-stop DTE not to be transmitted back to the
start-stop DTE. Value 64 does not apply if editing is not
enabled. If parameter 5, 12, 22 is set to a non-zero value,
then DC1 and DC3 are not echoed. The PAD recall character
specified by the value of parameter 1 is not echoed. It does
not apply if parameter 2 is set to 0. |
| INT x25PadProParity | 1.3.6.1.4.1.272.4.6.8.1.23 | INTEGER | read-write | The value of the parameter twenty one. It allows the PAD to
check parity in the data stream from the start-stop DTE and/or
generate parity in the data stream to the start-stop DTE.
Characters generated by the PAD itself (e.g., PAD service
signals) have even parity when this parameter is set to zero
unless the parity is determined by alternate means. |
| INT x25PadProPageWait | 1.3.6.1.4.1.272.4.6.8.1.24 | INTEGER | read-write | The value of the parameter twenty two. It allows the PAD to
suspend transmission of additional characters to the start-
stop DTE after specified number of linefeed characters have
been transmitted by the PAD. Value 0 determines page wait
disabled. A value between 1 and 255 will indicate page wait
condition after n-linefeed characters are sent by the PAD to
the start-stop DTE. |
| INT x25PadProXCharDel | 1.3.6.1.4.1.272.4.6.8.1.25 | INTEGER | read-write | The value of parameter one hundered eighteen. This parameter
is a repeating of parameter sixteen. |
| INT x25PadProXLineDel | 1.3.6.1.4.1.272.4.6.8.1.26 | INTEGER | read-write | The value of parameter one hundered nineteen. This parameter
is a repeating of parameter seventeen. |
| INT x25PadProXLineDisp | 1.3.6.1.4.1.272.4.6.8.1.27 | INTEGER | read-write | The value of the parameter one hundered twenty. This parameter
is a repeating of parameter eighteen. |
| INT x25PadProXForwardChar1 | 1.3.6.1.4.1.272.4.6.8.1.28 | INTEGER | read-write | The value of the parameter one hundered twenty one. This
parameter allows predefinition of one data forwarding
character in addition to parameter three. |
| INT x25PadProXForwardChar2 | 1.3.6.1.4.1.272.4.6.8.1.29 | INTEGER | read-write | The value of the parameter one hundered twenty two. This
parameter allows predefinition of one data forwarding
character in addition to parameter three. |
| INT x25PadProXParity | 1.3.6.1.4.1.272.4.6.8.1.30 | INTEGER | read-write | The value of the parameter one hundered twenty three. This
corresponds to the parameter twenty one, but the meaning of
values 1 and 3 are interchanged. |
| INT x25PadProXDelay | 1.3.6.1.4.1.272.4.6.8.1.31 | INTEGER | read-write | The value of the parameter one hundered twenty five. This
parameter determines how long data forwarding ist delayed,
wenn it synces with a data entry. |
| INT x25PadProXLFInsert | 1.3.6.1.4.1.272.4.6.8.1.32 | INTEGER | read-write | The value of the parameter one hundered twenty six. This is a
repeating of parameter thirteen. |
