APPIAN-PPORT-SONET-MIB

All MIBs › APPIAN-PPORT-SONET-MIB

Organization: Appian Communications, Inc.

Last Updated: 2000-02-23

Category: Optical and WDM, Vendor: Appian

Description: Covers section, line, and path performance management for physical SONET ports on Appian Communications equipment.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is APPIAN-PPORT-SONET-MIB?

APPIAN-PPORT-SONET-MIB is a vendor-specific MIB from Appian Communications that covers section, line, and path-layer performance management for physical SONET/SDH ports on Appian's optical access equipment, built on the standard PerfHist-TC-MIB textual conventions for interval-based counters. It defines acSonetPortTable for per-port administrative/operational status, medium line coding/type, loopback configuration, and ring identification; acSonetThresholdTable for configurable severely-errored-second thresholds; acSonetDCCTable for section/line/Appian data-communications-channel enable and failure state; and matching acSonetSection15MinuteIntervalTable and acSonetSectionDayIntervalTable structures reporting errored seconds (ESs), severely errored seconds (SESs), severely errored framing seconds (SEFSs), and coding violations (CVs) per 15-minute and daily bucket. This gives operators the granular, standards-aligned performance history needed to spot degrading SONET links (rising SES/SEFS counts) well before a port fails outright, similar in spirit to the standard SONET-MIB but scoped to Appian's port/slot/node addressing scheme. It depends on Appian's own APPIAN-SMI-MIB for node/slot/port indexing types and is deployed on Appian SONET/SDH access platforms in metro optical networks. Operators standardizing on Appian gear can download the APPIAN-PPORT-SONET-MIB file to pull it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in APPIAN-PPORT-SONET-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Appian Communications SONET/SDH access platforms

Monitoring Examples

An operator polls acSonetSection15MinuteIntervalSESs and acSonetSection15MinuteIntervalSEFSs for a given acSonetPortNodeId/Slot/Port, comparing recent intervals against acSonetThresholdSESSet; a run of intervals exceeding the configured SES threshold indicates a degrading SONET section that is likely to trigger a line/path alarm soon.

What Can Be Monitored

errored/severely-errored second counters per interval
severely errored framing second counts
coding violation counts
section/line data-communications-channel failure state
port admin/operational status and loopback configuration

Imported Objects

From APPIAN-SMI-MIB

AcAdminStatus
AcNodeId
AcOpStatus
AcPortNumber
AcSlotNumber
acPport	OBJECT-IDENTITY

From PerfHist-TC-MIB

PerfIntervalCount

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString
TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
acSonet	1.3.6.1.4.1.2785.2.3.6			The MIB module to describe SONET/SDH objects.
acSonetObjects	1.3.6.1.4.1.2785.2.3.6.1
acSonetPort	1.3.6.1.4.1.2785.2.3.6.1.1
acSonetPortTable	1.3.6.1.4.1.2785.2.3.6.1.1.1		not-accessible	The SONET/SDH Port table which must be created by the management client.
acSonetPortEntry	1.3.6.1.4.1.2785.2.3.6.1.1.1.1		not-accessible	An entry in the SONET/SDH Port table.
ACN acSonetPortNodeId	1.3.6.1.4.1.2785.2.3.6.1.1.1.1.1	AcNodeId	accessible-for-notify	The node id is the id for this specific node in the OSAP ring.
ACS acSonetPortSlot	1.3.6.1.4.1.2785.2.3.6.1.1.1.1.2	AcSlotNumber	accessible-for-notify	The physical slot number of the port.
ACP acSonetPortPort	1.3.6.1.4.1.2785.2.3.6.1.1.1.1.3	AcPortNumber	accessible-for-notify	The physical port number of the port.
ACA acSonetPortAdminStatus	1.3.6.1.4.1.2785.2.3.6.1.1.1.1.4	AcAdminStatus	read-create	Appian Administrative Status attribute used to set the provisioning state as either activate(1), inactivate(2) or delete(3). Refer to the Appian-SMI.mib file for additional information.
ACO acSonetPortOpStatus	1.3.6.1.4.1.2785.2.3.6.1.1.1.1.5	AcOpStatus	read-only	The current operational status for the SONET module controlling this port.
INT acSonetPortOpCode	1.3.6.1.4.1.2785.2.3.6.1.1.1.1.6	INTEGER	read-only	Provides a detailed status code which can be used to isolate a problem or state condition reported in acSonetPortOpStatus.
INT acSonetPortMediumType	1.3.6.1.4.1.2785.2.3.6.1.1.1.1.7	INTEGER	read-create	This variable identifies whether a SONET or a SDH signal is used across this interface.
I32 acSonetPortTimeElapsed	1.3.6.1.4.1.2785.2.3.6.1.1.1.1.8	Integer32	read-only	The number of seconds, including partial seconds, that have elapsed since the beginning of the current measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum value.
I32 acSonetPortValidIntervals	1.3.6.1.4.1.2785.2.3.6.1.1.1.1.9	Integer32	read-only	The number of previous 15-minute intervals for which data was collected. A SONET/SDH interface must be capable of supporting at least n intervals. The minimum value of n is 4. The default of n is 32. The maximum value of n is 96. The value will be unless the measurement was (re-)started within the last (*15) minutes, in which case the value will be the number of complete 15 minute intervals for which the agent has at least some data. In certain cases (e.g., in the case where the agent is a proxy) it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which data is available.
INT acSonetPortMediumLineCoding	1.3.6.1.4.1.2785.2.3.6.1.1.1.1.10	INTEGER	read-create	This variable describes the line coding for this interface. The B3ZS and CMI are used for electrical SONET/SDH signals (STS-1 and STS-3). The Non-Return to Zero (NRZ) and the Return to Zero are used for optical SONET/SDH signals.
INT acSonetPortMediumLineType	1.3.6.1.4.1.2785.2.3.6.1.1.1.1.11	INTEGER	read-create	This variable describes the line type for this interface. The line types are Short and Long Range Single Mode fiber or Multi-Mode fiber interfaces, and coax and UTP for electrical interfaces. The value acSonetOther should be used when the Line Type is not one of the listed values.
T/F acSonetPortTransmitterEnable	1.3.6.1.4.1.2785.2.3.6.1.1.1.1.12	TruthValue	read-create	Turns the laser on and off.
STR acSonetPortCircuitIdentifier	1.3.6.1.4.1.2785.2.3.6.1.1.1.1.13	DisplayString	read-create	This variable contains the transmission vendor's circuit identifier, for the purpose of facilitating troubleshooting. Note that the circuit identifier, if available, is also represented by ifPhysAddress.
I32 acSonetPortInvalidIntervals	1.3.6.1.4.1.2785.2.3.6.1.1.1.1.14	Integer32	read-only	The number of intervals in the range from 0 to acSonetPortValidIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals are not available (e.g., in proxy situations).
INT acSonetPortLoopbackConfig	1.3.6.1.4.1.2785.2.3.6.1.1.1.1.15	INTEGER	read-create	The current loopback state of the SONET/SDH interface. The values mean: none(0) Not in the loopback state. A device that is not capable of performing a loopback on this interface shall always return this value. facility(1) The received signal at this interface is looped back out through the corresponding transmitter in the return direction. terminal(2) The signal that is about to be transmitted is connected to the associated incoming receiver. other(3) Loopbacks that are not defined here.
T/F acSonetPortResetCurrentPMregs	1.3.6.1.4.1.2785.2.3.6.1.1.1.1.16	TruthValue	read-create	Reset Performance Monitoring Registers for current 15 minute and day to zero for entity-related statisics. Reset on receiving a 1, will automatically go to 0 at next 15 minute or day interval.
T/F acSonetPortResetAllPMregs	1.3.6.1.4.1.2785.2.3.6.1.1.1.1.17	TruthValue	read-create	Reset Performance Monitoring Registers to zero for all entity-related statisics. Reset on receiving a 1, will automatically go to 0 at next 15 minute or day interval.
INT acSonetPortConnectionType	1.3.6.1.4.1.2785.2.3.6.1.1.1.1.18	INTEGER	read-create	Whether the port is used on the ring side or the interconnect side. An interconnect interface is the one that connects to the ADM.
INT acSonetPortRingIdentifier	1.3.6.1.4.1.2785.2.3.6.1.1.1.1.19	INTEGER	read-create	This is a number assigned by carrier. It is contained here as a convenience for carrier and the EMS. It is not used by the device. When used, this should be set in east facing port row in this table. It can also be optionally set in the west facing port row in this table but it must be the same as the set in the east facing port row.
STR acSonetPortRingName	1.3.6.1.4.1.2785.2.3.6.1.1.1.1.20	DisplayString	read-create	An ASCII text name up to 32 characters in length which is assigned to this optical ring. Like the RingIdentifier, this is contained here as a convenience for the carrier and the EMS. It is not used by the device. When used, this should be set in east facing port row in this table. It can also be optionally set in the west facing port row in this table but it must be the same as the set in the east facing port row.
acSonetThresholdTable	1.3.6.1.4.1.2785.2.3.6.1.1.2		not-accessible	The SONET/SDH Threshold Table.
acSonetThresholdEntry	1.3.6.1.4.1.2785.2.3.6.1.1.2.1		not-accessible	An entry in the SONET/SDH Port Table.
ACN acSonetThresholdNodeId	1.3.6.1.4.1.2785.2.3.6.1.1.2.1.1	AcNodeId	accessible-for-notify	The node id is the id for this specific node in the OSAP ring.
ACS acSonetThresholdSlot	1.3.6.1.4.1.2785.2.3.6.1.1.2.1.2	AcSlotNumber	accessible-for-notify	The physical slot number of the port.
ACP acSonetThresholdPort	1.3.6.1.4.1.2785.2.3.6.1.1.2.1.3	AcPortNumber	accessible-for-notify	The physical port number of the port.
INT acSonetThresholdSESSet	1.3.6.1.4.1.2785.2.3.6.1.1.2.1.4	INTEGER	read-write	An enumerated integer indicating which recognized set of thresholds that the agent uses for determining severely errored seconds and unavailable time. other(1) None of the following. Bellcore1991(2) Bellcore TR-NWT-000253, 1991 [32], or ANSI T1M1.3/93-005R2, 1993 [22]. See also Appendix B. ansi1993(3) ANSI T1.231, 1993 [31], or Bellcore GR-253-CORE, Issue 2, 1995 [34] itu1995(4) ITU Recommendation G.826, 1995 [33] ansi1997(5) ANSI T1.231, 1997 [35] If a manager changes the value of this object then the SES statistics collected prior to this change must be invalidated.
acSonetDCCTable	1.3.6.1.4.1.2785.2.3.6.1.1.3		not-accessible	The SONET/SDH DCC Table.
acSonetDCCEntry	1.3.6.1.4.1.2785.2.3.6.1.1.3.1		not-accessible	An entry in the SONET/SDH Port Table.
ACN acSonetDCCNodeId	1.3.6.1.4.1.2785.2.3.6.1.1.3.1.1	AcNodeId	accessible-for-notify	The node id is the id for this specific node in the OSAP ring.
ACS acSonetDCCSlot	1.3.6.1.4.1.2785.2.3.6.1.1.3.1.2	AcSlotNumber	accessible-for-notify	The physical slot number of the port.
ACP acSonetDCCPort	1.3.6.1.4.1.2785.2.3.6.1.1.3.1.3	AcPortNumber	accessible-for-notify	The physical port number of the port.
T/F acSonetDCCSectionEnable	1.3.6.1.4.1.2785.2.3.6.1.1.3.1.4	TruthValue	read-write	This variable indicates that the DCC for the section is enabled.
T/F acSonetDCCLineEnable	1.3.6.1.4.1.2785.2.3.6.1.1.3.1.5	TruthValue	read-write	This variable indicates that the DCC for the line is enabled.
T/F acSonetDCCAppianEnable	1.3.6.1.4.1.2785.2.3.6.1.1.3.1.6	TruthValue	read-write	This variable indicates that the Appian DCC is enabled.
T/F acSonetDCCSectionFail	1.3.6.1.4.1.2785.2.3.6.1.1.3.1.7	TruthValue	read-only	This variable indicates that the DCC for the section has failed.
T/F acSonetDCCLineFail	1.3.6.1.4.1.2785.2.3.6.1.1.3.1.8	TruthValue	read-only	This variable indicates that the DCC for the line has failed.
T/F acSonetDCCAppianFail	1.3.6.1.4.1.2785.2.3.6.1.1.3.1.9	TruthValue	read-only	This variable indicates that the Appian DCC has failed.
acSonetPortProtectionTable	1.3.6.1.4.1.2785.2.3.6.1.1.4		not-accessible	The SONET/SDH Port Protection table.
acSonetPortProtectionEntry	1.3.6.1.4.1.2785.2.3.6.1.1.4.1		not-accessible	An entry in the SONET/SDH Port Protection table.
ACN acSonetPortProtectionNodeId	1.3.6.1.4.1.2785.2.3.6.1.1.4.1.1	AcNodeId	accessible-for-notify	The node id is the id for this specific node in the OSAP ring.
ACS acSonetPortProtectionSlot	1.3.6.1.4.1.2785.2.3.6.1.1.4.1.2	AcSlotNumber	accessible-for-notify	The physical slot number of the port.
ACP acSonetPortProtectionPort	1.3.6.1.4.1.2785.2.3.6.1.1.4.1.3	AcPortNumber	accessible-for-notify	The physical port number of the port.
INT acSonetPortProtectionType	1.3.6.1.4.1.2785.2.3.6.1.1.4.1.4	INTEGER	read-write	This variable statically defines the purpose of the physical port connection as the working or protection port. It does not convey whether the system has undergone a protection switch.
acSonetSection	1.3.6.1.4.1.2785.2.3.6.1.2
acSonetSection15MinuteIntervalTable	1.3.6.1.4.1.2785.2.3.6.1.2.1		not-accessible	The SONET/SDH Section 15Minute Interval table.
acSonetSection15MinuteIntervalEntry	1.3.6.1.4.1.2785.2.3.6.1.2.1.1		not-accessible	An entry in the SONET/SDH Section 15Minute Interval table.
ACN acSonetSection15MinuteIntervalNodeId	1.3.6.1.4.1.2785.2.3.6.1.2.1.1.1	AcNodeId	accessible-for-notify	The node id is the id for this specific node in the OSAP ring.
ACS acSonetSection15MinuteIntervalSlot	1.3.6.1.4.1.2785.2.3.6.1.2.1.1.2	AcSlotNumber	accessible-for-notify	The physical slot number of the port.
ACP acSonetSection15MinuteIntervalPort	1.3.6.1.4.1.2785.2.3.6.1.2.1.1.3	AcPortNumber	accessible-for-notify	The physical port number of the port.
INT acSonetSection15MinuteIntervalNumber	1.3.6.1.4.1.2785.2.3.6.1.2.1.1.4	INTEGER	accessible-for-notify	A number between 1 and 98, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the ongoing, current 15 minute interval. The interval identified by 2 is the most recently completed 15 minute interval. The interval identified by 97 is the oldest 15 minute interval. The interval identified by 98 is a total of the previous 96 stored 15 minute intervals.
T/F acSonetSection15MinuteIntervalValidStats	1.3.6.1.4.1.2785.2.3.6.1.2.1.1.5	TruthValue	read-only	This flag indicates if the data for this interval is valid.
T/F acSonetSection15MinuteIntervalResetStats	1.3.6.1.4.1.2785.2.3.6.1.2.1.1.6	TruthValue	read-write	This flag is used to reset the data for a 15 minute interval.
I32 acSonetSection15MinuteIntervalStatus	1.3.6.1.4.1.2785.2.3.6.1.2.1.1.7	Integer32	read-only	This variable indicates the status of the interface. The acSonetSectionCurrentStatus is a bit map represented as a sum, therefore, it can represent multiple defects simultaneously. The acSonetSectionNoDefect should be set if and only if no other flag is set. The various bit positions are: 1 acSonetSectionNoDefect 2 acSonetSectionLOS 4 acSonetSectionLOF
NUM acSonetSection15MinuteIntervalESs	1.3.6.1.4.1.2785.2.3.6.1.2.1.1.8	PerfIntervalCount	read-only	The counter associated with the number of Errored Seconds encountered by a SONET/SDH Section in a particular 15-minute interval in the past 24 hours.
NUM acSonetSection15MinuteIntervalSESs	1.3.6.1.4.1.2785.2.3.6.1.2.1.1.9	PerfIntervalCount	read-only	The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Section in a particular 15-minute interval in the past 24 hours.
NUM acSonetSection15MinuteIntervalSEFSs	1.3.6.1.4.1.2785.2.3.6.1.2.1.1.10	PerfIntervalCount	read-only	The counter associated with the number of Severely Errored Framing Seconds encountered by a SONET/SDH Section in a particular 15-minute interval in the past 24 hours.
NUM acSonetSection15MinuteIntervalCVs	1.3.6.1.4.1.2785.2.3.6.1.2.1.1.11	PerfIntervalCount	read-only	The counter associated with the number of Coding Violations encountered by a SONET/SDH Section in a particular 15-minute interval in the past 24 hours.
acSonetSectionDayIntervalTable	1.3.6.1.4.1.2785.2.3.6.1.2.2		not-accessible	The SONET/SDH Section Day Interval table.
acSonetSectionDayIntervalEntry	1.3.6.1.4.1.2785.2.3.6.1.2.2.1		not-accessible	An entry in the SONET/SDH Section Day Interval table.
ACN acSonetSectionDayIntervalNodeId	1.3.6.1.4.1.2785.2.3.6.1.2.2.1.1	AcNodeId	accessible-for-notify	The node id is the id for this specific node in the OSAP ring.
ACS acSonetSectionDayIntervalSlot	1.3.6.1.4.1.2785.2.3.6.1.2.2.1.2	AcSlotNumber	accessible-for-notify	The physical slot number of the port.
ACP acSonetSectionDayIntervalPort	1.3.6.1.4.1.2785.2.3.6.1.2.2.1.3	AcPortNumber	accessible-for-notify	The physical port number of the port.
INT acSonetSectionDayIntervalNumber	1.3.6.1.4.1.2785.2.3.6.1.2.2.1.4	INTEGER	accessible-for-notify	A number between 1 and 31, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the ongoing, current day performance monitoring interval. The interval identified by 2 is the most recently completed day interval. The interval identified by 31 is the oldest day interval.
T/F acSonetSectionDayIntervalValidStats	1.3.6.1.4.1.2785.2.3.6.1.2.2.1.5	TruthValue	read-only	This flag indicates if the data for this interval is valid.
T/F acSonetSectionDayIntervalResetStats	1.3.6.1.4.1.2785.2.3.6.1.2.2.1.6	TruthValue	read-write	Flag used to reset the current day interval stats.
I32 acSonetSectionDayIntervalStatus	1.3.6.1.4.1.2785.2.3.6.1.2.2.1.7	Integer32	read-only	This variable indicates the status of the interface. The acSonetSectionCurrentStatus is a bit map represented as a sum, therefore, it can represent multiple defects simultaneously. The acSonetSectionNoDefect should be set if and only if no other flag is set. The various bit positions are: 1 acSonetSectionNoDefect 2 acSonetSectionLOS 4 acSonetSectionLOF
NUM acSonetSectionDayIntervalESs	1.3.6.1.4.1.2785.2.3.6.1.2.2.1.8	PerfIntervalCount	read-only	The counter associated with the number of Errored Seconds encountered by a SONET/SDH Section in a particular day interval in the past 30 days.
NUM acSonetSectionDayIntervalSESs	1.3.6.1.4.1.2785.2.3.6.1.2.2.1.9	PerfIntervalCount	read-only	The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Section in a particular day interval in the past 30 days.
NUM acSonetSectionDayIntervalSEFSs	1.3.6.1.4.1.2785.2.3.6.1.2.2.1.10	PerfIntervalCount	read-only	The counter associated with the number of Severely Errored Framing Seconds encountered by a SONET/SDH Section in a particular day interval in the past 30 days.
NUM acSonetSectionDayIntervalCVs	1.3.6.1.4.1.2785.2.3.6.1.2.2.1.11	PerfIntervalCount	read-only	The counter associated with the number of Coding Violations encountered by a SONET/SDH Section in a particular day interval in the past 30 days.
acSonetSectionThresholdTable	1.3.6.1.4.1.2785.2.3.6.1.2.3		not-accessible	The SONET/SDH Section Threshold Table.
acSonetSectionThresholdEntry	1.3.6.1.4.1.2785.2.3.6.1.2.3.1		not-accessible	An entry in the SONET/SDH Section Threshold Table.
ACN acSonetSectionThresholdNodeId	1.3.6.1.4.1.2785.2.3.6.1.2.3.1.1	AcNodeId	accessible-for-notify	The node id is the id for this specific node in the OSAP ring.
ACS acSonetSectionThresholdSlot	1.3.6.1.4.1.2785.2.3.6.1.2.3.1.2	AcSlotNumber	accessible-for-notify	The physical slot number of the port.
ACP acSonetSectionThresholdPort	1.3.6.1.4.1.2785.2.3.6.1.2.3.1.3	AcPortNumber	accessible-for-notify	The physical port number of the port.
INT acSonetSectionThresholdSelectionNum	1.3.6.1.4.1.2785.2.3.6.1.2.3.1.4	INTEGER	accessible-for-notify	A number that selects either the 15 thresholds or the day thresholds.
ACA acSonetSectionThresholdAdminStatus	1.3.6.1.4.1.2785.2.3.6.1.2.3.1.5	AcAdminStatus	read-write	This field is used by the administrator to ensure only one client is performing management operations on this sonet port at a time. When the field is read as available(0), the client can write the value locked(1) into this field to prevent a second client from performing managment ops on this instance.
INT acSonetSectionThresholdESs	1.3.6.1.4.1.2785.2.3.6.1.2.3.1.6	INTEGER	read-write	The threshold associated with Errored Seconds.
INT acSonetSectionThresholdSESs	1.3.6.1.4.1.2785.2.3.6.1.2.3.1.7	INTEGER	read-write	The threshold associated with Severely Errored Seconds.
INT acSonetSectionThresholdSEFSs	1.3.6.1.4.1.2785.2.3.6.1.2.3.1.8	INTEGER	read-write	The threshold associated with Severely Errored Framing Seconds.
INT acSonetSectionThresholdCVs	1.3.6.1.4.1.2785.2.3.6.1.2.3.1.9	INTEGER	read-write	The threshold associated with Coding Violations.
acSonetSectionTIMTable	1.3.6.1.4.1.2785.2.3.6.1.2.4		not-accessible	The SONET/SDH Section Trace Identifier Mismatch Table.
acSonetSectionTIMEntry	1.3.6.1.4.1.2785.2.3.6.1.2.4.1		not-accessible	An entry in the SONET/SDH Section Trace Identifier Mismatch Table.
ACN acSonetSectionTIMNodeId	1.3.6.1.4.1.2785.2.3.6.1.2.4.1.1	AcNodeId	accessible-for-notify	The node id is the id for this specific node in the OSAP ring.
ACS acSonetSectionTIMSlot	1.3.6.1.4.1.2785.2.3.6.1.2.4.1.2	AcSlotNumber	accessible-for-notify	The physical slot number of the port.
ACP acSonetSectionTIMPort	1.3.6.1.4.1.2785.2.3.6.1.2.4.1.3	AcPortNumber	accessible-for-notify	The physical port number of the port.
T/F acSonetSectionTIMGenerateEnable	1.3.6.1.4.1.2785.2.3.6.1.2.4.1.4	TruthValue	read-write	Enables the generation of the Section Trace Identifier.
T/F acSonetSectionTIMDetectEnable	1.3.6.1.4.1.2785.2.3.6.1.2.4.1.5	TruthValue	read-write	Enables the detection of the Section Trace Identifier.
STR acSonetSectionTIMTransmitedString	1.3.6.1.4.1.2785.2.3.6.1.2.4.1.6	AcTraceString	read-write	The string that gets sent to the destination.
STR acSonetSectionTIMExpectedString	1.3.6.1.4.1.2785.2.3.6.1.2.4.1.7	AcTraceString	read-write	The expected string that is to be received.
STR acSonetSectionTIMReceivedString	1.3.6.1.4.1.2785.2.3.6.1.2.4.1.8	AcTraceString	read-only	The contents of the string that is received.
T/F acSonetSectionTIMFailure	1.3.6.1.4.1.2785.2.3.6.1.2.4.1.9	TruthValue	read-only	Failure declared of the Section Trace Identifier.
INT acSonetSectionTIMFormat	1.3.6.1.4.1.2785.2.3.6.1.2.4.1.10	INTEGER	read-write	Format of Path Trace buffer.
T/F acSonetSectionTIMMismatchZeros	1.3.6.1.4.1.2785.2.3.6.1.2.4.1.11	TruthValue	read-write	Controls whether a received trace message containing all zeros can cause a mismatch defect.
acSonetSectionSSMTable	1.3.6.1.4.1.2785.2.3.6.1.2.5		not-accessible	The SONET/SDH Section Synchronization Status Message Table.
acSonetSectionSSMEntry	1.3.6.1.4.1.2785.2.3.6.1.2.5.1		not-accessible	An entry in the SONET/SDH Section Synchronization Status Message Table.
ACN acSonetSectionSSMNodeId	1.3.6.1.4.1.2785.2.3.6.1.2.5.1.1	AcNodeId	accessible-for-notify	The node id is the id for this specific node in the OSAP ring.
ACS acSonetSectionSSMSlot	1.3.6.1.4.1.2785.2.3.6.1.2.5.1.2	AcSlotNumber	accessible-for-notify	The physical slot number of the port.
ACP acSonetSectionSSMPort	1.3.6.1.4.1.2785.2.3.6.1.2.5.1.3	AcPortNumber	accessible-for-notify	The physical port number of the port.
T/F acSonetSectionSSMDetectEnable	1.3.6.1.4.1.2785.2.3.6.1.2.5.1.4	TruthValue	read-write	Enables the detection of the Synchronization Status Message.
INT acSonetSectionSSMTransmitedValue	1.3.6.1.4.1.2785.2.3.6.1.2.5.1.5	INTEGER	read-only	The S1 byte value that gets sent to the destination.
INT acSonetSectionSSMReceivedValue	1.3.6.1.4.1.2785.2.3.6.1.2.5.1.6	INTEGER	read-only	The S1 byte value that is received.
acSonetLine	1.3.6.1.4.1.2785.2.3.6.1.3
acSonetLine15MinuteIntervalTable	1.3.6.1.4.1.2785.2.3.6.1.3.1		not-accessible	The SONET/SDH Line 15Minute Interval Table.
acSonetLine15MinuteIntervalEntry	1.3.6.1.4.1.2785.2.3.6.1.3.1.1		not-accessible	An entry in the SONET/SDH Line 15Minute Interval table.
ACN acSonetLine15MinuteIntervalNodeId	1.3.6.1.4.1.2785.2.3.6.1.3.1.1.1	AcNodeId	accessible-for-notify	The node id is the id for this specific node in the OSAP ring.
ACS acSonetLine15MinuteIntervalSlot	1.3.6.1.4.1.2785.2.3.6.1.3.1.1.2	AcSlotNumber	accessible-for-notify	The physical slot number of the port.
ACP acSonetLine15MinuteIntervalPort	1.3.6.1.4.1.2785.2.3.6.1.3.1.1.3	AcPortNumber	accessible-for-notify	The physical port number of the port.
INT acSonetLine15MinuteIntervalNumber	1.3.6.1.4.1.2785.2.3.6.1.3.1.1.4	INTEGER	accessible-for-notify	A number between 1 and 98, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the ongoing, current 15 minute interval. The interval identified by 2 is the most recently completed 15 minute interval. The interval identified by 97 is the oldest 15 minute interval. The interval identified by 98 is a total of the previous 96 stored 15 minute intervals.
T/F acSonetLine15MinuteIntervalValidStats	1.3.6.1.4.1.2785.2.3.6.1.3.1.1.5	TruthValue	read-only	This variable indicates if the data for this interval is valid.
T/F acSonetLine15MinuteIntervalResetStats	1.3.6.1.4.1.2785.2.3.6.1.3.1.1.6	TruthValue	read-write	Flag to reset the 15 minute SONET Line interval statistics.
I32 acSonetLine15MinuteIntervalStatus	1.3.6.1.4.1.2785.2.3.6.1.3.1.1.7	Integer32	read-only	This variable indicates the status of the interface. The acSonetLineCurrentStatus is a bit map represented as a sum, therefore, it can represent multiple defects simultaneously. The acSonetLineNoDefect should be set if and only if no other flag is set. The various bit positions are: 1 acSonetLineNoDefect 2 acSonetLineAIS 4 acSonetLineRDI
NUM acSonetLine15MinuteIntervalESs	1.3.6.1.4.1.2785.2.3.6.1.3.1.1.8	PerfIntervalCount	read-only	The counter associated with the number of Errored Seconds encountered by a SONET/SDH Line in a particular 15-minute interval in the past 24 hours.
NUM acSonetLine15MinuteIntervalSESs	1.3.6.1.4.1.2785.2.3.6.1.3.1.1.9	PerfIntervalCount	read-only	The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Line in a particular 15-minute interval in the past 24 hours.
NUM acSonetLine15MinuteIntervalCVs	1.3.6.1.4.1.2785.2.3.6.1.3.1.1.10	PerfIntervalCount	read-only	The counter associated with the number of Coding Violations encountered by a SONET/SDH Line in a particular 15-minute interval in the past 24 hours.
NUM acSonetLine15MinuteIntervalUASs	1.3.6.1.4.1.2785.2.3.6.1.3.1.1.11	PerfIntervalCount	read-only	The counter associated with the number of Unavailable Seconds encountered by a SONET/SDH Line in a particular 15-minute interval in the past 24 hours.
NUM acSonetLine15MinuteIntervalBER	1.3.6.1.4.1.2785.2.3.6.1.3.1.1.12	PerfIntervalCount	read-only	The counter associated with the max BER encountered by a SONET/SDH Line in a particular 15-minute interval in the past 24 hours.
acSonetLineDayIntervalTable	1.3.6.1.4.1.2785.2.3.6.1.3.2		not-accessible	The SONET/SDH Line Day Interval Table.
acSonetLineDayIntervalEntry	1.3.6.1.4.1.2785.2.3.6.1.3.2.1		not-accessible	An entry in the SONET/SDH Line Day Interval table.
ACN acSonetLineDayIntervalNodeId	1.3.6.1.4.1.2785.2.3.6.1.3.2.1.1	AcNodeId	accessible-for-notify	The node id is the id for this specific node in the OSAP ring.
ACS acSonetLineDayIntervalSlot	1.3.6.1.4.1.2785.2.3.6.1.3.2.1.2	AcSlotNumber	accessible-for-notify	The physical slot number of the port.
ACP acSonetLineDayIntervalPort	1.3.6.1.4.1.2785.2.3.6.1.3.2.1.3	AcPortNumber	accessible-for-notify	The physical port number of the port.
INT acSonetLineDayIntervalNumber	1.3.6.1.4.1.2785.2.3.6.1.3.2.1.4	INTEGER	accessible-for-notify	A number between 1 and 31, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the ongoing, current day performance monitoring interval. The interval identified by 2 is the most recently completed day interval. The interval identified by 31 is the oldest day interval.
T/F acSonetLineDayIntervalValidStats	1.3.6.1.4.1.2785.2.3.6.1.3.2.1.5	TruthValue	read-only	This variable indicates if the data for this interval is valid.
T/F acSonetLineDayIntervalResetStats	1.3.6.1.4.1.2785.2.3.6.1.3.2.1.6	TruthValue	read-write	Flag to reset the SONET Line Day interval statistics.
I32 acSonetLineDayIntervalStatus	1.3.6.1.4.1.2785.2.3.6.1.3.2.1.7	Integer32	read-only	This variable indicates the status of the interface. The acSonetLineCurrentStatus is a bit map represented as a sum, therefore, it can represent multiple defects simultaneously. The acSonetLineNoDefect should be set if and only if no other flag is set. The various bit positions are: 1 acSonetLineNoDefect 2 acSonetLineAIS 4 acSonetLineRDI
NUM acSonetLineDayIntervalESs	1.3.6.1.4.1.2785.2.3.6.1.3.2.1.8	PerfIntervalCount	read-only	The counter associated with the number of Errored Seconds encountered by a SONET/SDH Line in a particular day interval in the past 30 days.
NUM acSonetLineDayIntervalSESs	1.3.6.1.4.1.2785.2.3.6.1.3.2.1.9	PerfIntervalCount	read-only	The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Line in a particular day interval in the past 30 days.
NUM acSonetLineDayIntervalCVs	1.3.6.1.4.1.2785.2.3.6.1.3.2.1.10	PerfIntervalCount	read-only	The counter associated with the number of Coding Violations encountered by a SONET/SDH Line in a particular day interval in the past 30 days.
NUM acSonetLineDayIntervalUASs	1.3.6.1.4.1.2785.2.3.6.1.3.2.1.11	PerfIntervalCount	read-only	The counter associated with the number of Unavailable Seconds encountered by a SONET/SDH Line in a particular day interval in the past 30 days.
NUM acSonetLineDayIntervalBER	1.3.6.1.4.1.2785.2.3.6.1.3.2.1.12	PerfIntervalCount	read-only	The counter associated with the max BER encountered by a SONET/SDH Line in a particular day interval in the past 30 days.
acSonetLineThresholdTable	1.3.6.1.4.1.2785.2.3.6.1.3.3		not-accessible	The SONET/SDH Line Threshold Table.
acSonetLineThresholdEntry	1.3.6.1.4.1.2785.2.3.6.1.3.3.1		not-accessible	An entry in the SONET/SDH Line Threshold Table.
ACN acSonetLineThresholdNodeId	1.3.6.1.4.1.2785.2.3.6.1.3.3.1.1	AcNodeId	accessible-for-notify	The node id is the id for this specific node in the OSAP ring.
ACS acSonetLineThresholdSlot	1.3.6.1.4.1.2785.2.3.6.1.3.3.1.2	AcSlotNumber	accessible-for-notify	The physical slot number of the port.
ACP acSonetLineThresholdPort	1.3.6.1.4.1.2785.2.3.6.1.3.3.1.3	AcPortNumber	accessible-for-notify	The physical port number of the port.
INT acSonetLineThresholdSelectionNum	1.3.6.1.4.1.2785.2.3.6.1.3.3.1.4	INTEGER	accessible-for-notify	A number that selects either the 15 thresholds or the day thresholds.
ACA acSonetLineThresholdAdminStatus	1.3.6.1.4.1.2785.2.3.6.1.3.3.1.5	AcAdminStatus	read-write	This field is used by the administrator to ensure only one client is performing management operations on this serial port at a time. When the field is read as available(0), the client can write the value locked(1) into this field to prevent a second client from performing managment ops on this instance.
INT acSonetLineThresholdESs	1.3.6.1.4.1.2785.2.3.6.1.3.3.1.6	INTEGER	read-write	The threshold associated with Errored Seconds.
INT acSonetLineThresholdSESs	1.3.6.1.4.1.2785.2.3.6.1.3.3.1.7	INTEGER	read-write	The threshold associated with Severely Errored Seconds.
INT acSonetLineThresholdCVs	1.3.6.1.4.1.2785.2.3.6.1.3.3.1.8	INTEGER	read-write	The threshold associated with Coding Violations.
INT acSonetLineThresholdUASs	1.3.6.1.4.1.2785.2.3.6.1.3.3.1.9	INTEGER	read-write	The threshold associated with Unavailable Secondss.
acSonetLineProtectionTable	1.3.6.1.4.1.2785.2.3.6.1.3.4		not-accessible	The SONET/SDH Line Protection table.
acSonetLineProtectionEntry	1.3.6.1.4.1.2785.2.3.6.1.3.4.1		not-accessible	An entry in the SONET/SDH Line Protection table.
ACN acSonetLineProtectionNodeId	1.3.6.1.4.1.2785.2.3.6.1.3.4.1.1	AcNodeId	accessible-for-notify	The node id is the id for this specific node in the OSAP ring.
ACS acSonetLineProtectionSlot	1.3.6.1.4.1.2785.2.3.6.1.3.4.1.2	AcSlotNumber	accessible-for-notify	The physical slot number of the port.
ACP acSonetLineProtectionPort	1.3.6.1.4.1.2785.2.3.6.1.3.4.1.3	AcPortNumber	accessible-for-notify	The physical port number of the port.
INT acSonetLineProtectionArchitecture	1.3.6.1.4.1.2785.2.3.6.1.3.4.1.4	INTEGER	read-write	This variable defines the APS architecture as either 1+1 or 1:1.
INT acSonetLineProtectionOpMode	1.3.6.1.4.1.2785.2.3.6.1.3.4.1.5	INTEGER	read-write	This variable defines the APS mode as either unidirectional or bidirectional.
INT acSonetLineProtectionSwitchType	1.3.6.1.4.1.2785.2.3.6.1.3.4.1.6	INTEGER	read-write	This variable defines the APS switch type as either revertive or nonrevertive.
I32 acSonetLineProtectionSFThreshold	1.3.6.1.4.1.2785.2.3.6.1.3.4.1.7	Integer32	read-write	The threshold associated with Signal Fail (SF). This value determines the BER level for protection switching.
I32 acSonetLineProtectionSDThreshold	1.3.6.1.4.1.2785.2.3.6.1.3.4.1.8	Integer32	read-write	The threshold associated with Signal Degrade (SD). This value determines the BER level for protection switching.
T/F acSonetLineProtectionActiveTraffic	1.3.6.1.4.1.2785.2.3.6.1.3.4.1.9	TruthValue	read-only	This variable indicates when active traffic is on this line.
T/F acSonetLineProtectionProtectionSwitch	1.3.6.1.4.1.2785.2.3.6.1.3.4.1.10	TruthValue	read-only	This variable indicates when a protection switch is currently affecting this line.
T/F acSonetLineProtectionFail	1.3.6.1.4.1.2785.2.3.6.1.3.4.1.11	TruthValue	read-only	This variable indicates when a protection switching failure has taken place. See GR-253, 6.2.1.1.6.
T/F acSonetLineProtectionChannelMismatchFail	1.3.6.1.4.1.2785.2.3.6.1.3.4.1.12	TruthValue	read-only	This variable indicates when a protection switching channel mismatch failure has taken place. See GR-253, 6.2.1.1.6.
T/F acSonetLineProtectionModeMismatchFail	1.3.6.1.4.1.2785.2.3.6.1.3.4.1.13	TruthValue	read-only	This variable indicates when a protection switching mode mismatch failure has taken place. See GR-253, 6.2.1.1.6.
T/F acSonetLineProtectionFarEndLineFail	1.3.6.1.4.1.2785.2.3.6.1.3.4.1.14	TruthValue	read-only	This variable indicates when a protection switching far-end protection-line failure has taken place. See GR-253, 6.2.1.1.6.
I32 acSonetLineProtectionWTRTime	1.3.6.1.4.1.2785.2.3.6.1.3.4.1.15	Integer32	read-write	This variable defines the APS Wait To Restore time. The time has one second granularity and may have a value in the range from 300 seconds (5 minutes) to 720 seconds (12 minutes).
INT acSonetLineProtectionManCommand	1.3.6.1.4.1.2785.2.3.6.1.3.4.1.16	INTEGER	read-write	This variable defines the APS manually initiated commands.
acSonetFarEndLine	1.3.6.1.4.1.2785.2.3.6.1.4
acSonetFarEndLine15MinuteIntervalTable	1.3.6.1.4.1.2785.2.3.6.1.4.1		not-accessible	The SONET/SDH FarEndLine 15Minute Interval Table.
acSonetFarEndLine15MinuteIntervalEntry	1.3.6.1.4.1.2785.2.3.6.1.4.1.1		not-accessible	An entry in the SONET/SDH FarEndLine 15Minute Interval table.
ACN acSonetFarEndLine15MinuteIntervalNodeId	1.3.6.1.4.1.2785.2.3.6.1.4.1.1.1	AcNodeId	accessible-for-notify	The node id is the id for this specific node in the OSAP ring.
ACS acSonetFarEndLine15MinuteIntervalSlot	1.3.6.1.4.1.2785.2.3.6.1.4.1.1.2	AcSlotNumber	accessible-for-notify	The physical slot number of the port.
ACP acSonetFarEndLine15MinuteIntervalPort	1.3.6.1.4.1.2785.2.3.6.1.4.1.1.3	AcPortNumber	accessible-for-notify	The physical port number of the port.
INT acSonetFarEndLine15MinuteIntervalNumber	1.3.6.1.4.1.2785.2.3.6.1.4.1.1.4	INTEGER	accessible-for-notify	A number between 1 and 98, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the ongoing, current 15 minute interval. The interval identified by 2 is the most recently completed 15 minute interval. The interval identified by 97 is the oldest 15 minute interval. The interval identified by 98 is a total of the previous 96 stored 15 minute intervals.
T/F acSonetFarEndLine15MinuteIntervalValidStats	1.3.6.1.4.1.2785.2.3.6.1.4.1.1.5	TruthValue	read-only	This variable indicates if the data for this interval is valid.
T/F acSonetFarEndLine15MinuteIntervalResetStats	1.3.6.1.4.1.2785.2.3.6.1.4.1.1.6	TruthValue	read-write	Flag to reset the SONET Far End Line 15 minute interval statistics.
NUM acSonetFarEndLine15MinuteIntervalESs	1.3.6.1.4.1.2785.2.3.6.1.4.1.1.7	PerfIntervalCount	read-only	The counter associated with the number of Errored Seconds encountered by a SONET/SDH FarEndLine in a particular 15-minute interval in the past 24 hours.
NUM acSonetFarEndLine15MinuteIntervalSESs	1.3.6.1.4.1.2785.2.3.6.1.4.1.1.8	PerfIntervalCount	read-only	The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH FarEndLine in a particular 15-minute interval in the past 24 hours.
NUM acSonetFarEndLine15MinuteIntervalCVs	1.3.6.1.4.1.2785.2.3.6.1.4.1.1.9	PerfIntervalCount	read-only	The counter associated with the number of Coding Violations encountered by a SONET/SDH FarEndLine in a particular 15-minute interval in the past 24 hours.
NUM acSonetFarEndLine15MinuteIntervalUASs	1.3.6.1.4.1.2785.2.3.6.1.4.1.1.10	PerfIntervalCount	read-only	The counter associated with the number of Unavailable Seconds encountered by a SONET/SDH FarEndLine in a particular 15-minute interval in the past 24 hours.
acSonetFarEndLineDayIntervalTable	1.3.6.1.4.1.2785.2.3.6.1.4.2		not-accessible	The SONET/SDH FarEndLine Day Interval Table.
acSonetFarEndLineDayIntervalEntry	1.3.6.1.4.1.2785.2.3.6.1.4.2.1		not-accessible	An entry in the SONET/SDH FarEndLine Day Interval table.
ACN acSonetFarEndLineDayIntervalNodeId	1.3.6.1.4.1.2785.2.3.6.1.4.2.1.1	AcNodeId	accessible-for-notify	The node id is the id for this specific node in the OSAP ring.
ACS acSonetFarEndLineDayIntervalSlot	1.3.6.1.4.1.2785.2.3.6.1.4.2.1.2	AcSlotNumber	accessible-for-notify	The physical slot number of the port.
ACP acSonetFarEndLineDayIntervalPort	1.3.6.1.4.1.2785.2.3.6.1.4.2.1.3	AcPortNumber	accessible-for-notify	The physical port number of the port.
INT acSonetFarEndLineDayIntervalNumber	1.3.6.1.4.1.2785.2.3.6.1.4.2.1.4	INTEGER	accessible-for-notify	A number between 1 and 31, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the ongoing, current day performance monitoring interval. The interval identified by 2 is the most recently completed day interval. The interval identified by 31 is the oldest day interval.
T/F acSonetFarEndLineDayIntervalValidStats	1.3.6.1.4.1.2785.2.3.6.1.4.2.1.5	TruthValue	read-only	This variable indicates if the data for this interval is valid.
T/F acSonetFarEndLineDayIntervalResetStats	1.3.6.1.4.1.2785.2.3.6.1.4.2.1.6	TruthValue	read-write	Flag to reset the SONET far end line day interval statistics.
NUM acSonetFarEndLineDayIntervalESs	1.3.6.1.4.1.2785.2.3.6.1.4.2.1.7	PerfIntervalCount	read-only	The counter associated with the number of Errored Seconds encountered by a SONET/SDH FarEndLine in a particular day interval in the past 30 days.
NUM acSonetFarEndLineDayIntervalSESs	1.3.6.1.4.1.2785.2.3.6.1.4.2.1.8	PerfIntervalCount	read-only	The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH FarEndLine in a particular day interval in the past 30 days.
NUM acSonetFarEndLineDayIntervalCVs	1.3.6.1.4.1.2785.2.3.6.1.4.2.1.9	PerfIntervalCount	read-only	The counter associated with the number of Coding Violations encountered by a SONET/SDH FarEndLine in a particular day interval in the past 30 days.
NUM acSonetFarEndLineDayIntervalUASs	1.3.6.1.4.1.2785.2.3.6.1.4.2.1.10	PerfIntervalCount	read-only	The counter associated with the number of Unavailable Seconds encountered by a SONET/SDH FarEndLine in a particular day interval in the past 30 days.
acSonetFarEndLineThresholdTable	1.3.6.1.4.1.2785.2.3.6.1.4.3		not-accessible	The SONET/SDH FarEndLine Threshold Table.
acSonetFarEndLineThresholdEntry	1.3.6.1.4.1.2785.2.3.6.1.4.3.1		not-accessible	An entry in the SONET/SDH FarEndLine Threshold Table.
ACN acSonetFarEndLineThresholdNodeId	1.3.6.1.4.1.2785.2.3.6.1.4.3.1.1	AcNodeId	accessible-for-notify	The node id is the id for this specific node in the OSAP ring.
ACS acSonetFarEndLineThresholdSlot	1.3.6.1.4.1.2785.2.3.6.1.4.3.1.2	AcSlotNumber	accessible-for-notify	The physical slot number of the port.
ACP acSonetFarEndLineThresholdPort	1.3.6.1.4.1.2785.2.3.6.1.4.3.1.3	AcPortNumber	accessible-for-notify	The physical port number of the port.
INT acSonetFarEndLineThresholdSelectionNum	1.3.6.1.4.1.2785.2.3.6.1.4.3.1.4	INTEGER	accessible-for-notify	A number that selects either the 15 thresholds or the day thresholds.
ACA acSonetFarEndLineThresholdAdminStatus	1.3.6.1.4.1.2785.2.3.6.1.4.3.1.5	AcAdminStatus	read-write	This field is used by the administrator to ensure only one client is performing management operations on this serial port at a time. When the field is read as available(0), the client can write the value locked(1) into this field to prevent a second client from performing managment ops on this instance.
INT acSonetFarEndLineThresholdESs	1.3.6.1.4.1.2785.2.3.6.1.4.3.1.6	INTEGER	read-write	The threshold associated with Errored Seconds.
INT acSonetFarEndLineThresholdSESs	1.3.6.1.4.1.2785.2.3.6.1.4.3.1.7	INTEGER	read-write	The threshold associated with Severely Errored Seconds.
INT acSonetFarEndLineThresholdCVs	1.3.6.1.4.1.2785.2.3.6.1.4.3.1.8	INTEGER	read-write	The threshold associated with Coding Violations.
INT acSonetFarEndLineThresholdUASs	1.3.6.1.4.1.2785.2.3.6.1.4.3.1.9	INTEGER	read-write	The threshold associated with Unavailable Secondss.
acSonetObjectsPath	1.3.6.1.4.1.2785.2.3.6.2
acSonetPath	1.3.6.1.4.1.2785.2.3.6.2.1
acSonetPath15MinuteIntervalTable	1.3.6.1.4.1.2785.2.3.6.2.1.1		not-accessible	The SONET/SDH Path 15Minute Interval table.
acSonetPath15MinuteIntervalEntry	1.3.6.1.4.1.2785.2.3.6.2.1.1.1		not-accessible	An entry in the SONET/SDH Path 15Minute Interval table.
ACN acSonetPath15MinuteIntervalNodeId	1.3.6.1.4.1.2785.2.3.6.2.1.1.1.1	AcNodeId	accessible-for-notify	The node id is the id for this specific node in the OSAP ring.
ACS acSonetPath15MinuteIntervalSlot	1.3.6.1.4.1.2785.2.3.6.2.1.1.1.2	AcSlotNumber	accessible-for-notify	The physical slot number of the port.
ACP acSonetPath15MinuteIntervalPort	1.3.6.1.4.1.2785.2.3.6.2.1.1.1.3	AcPortNumber	accessible-for-notify	The physical port number of the port.
INT acSonetPath15MinuteIntervalPath	1.3.6.1.4.1.2785.2.3.6.2.1.1.1.4	INTEGER	accessible-for-notify	The STS Path for which the set of statistics is available.
INT acSonetPath15MinuteIntervalNumber	1.3.6.1.4.1.2785.2.3.6.2.1.1.1.5	INTEGER	accessible-for-notify	A number between 1 and 98, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the ongoing, current 15 minute interval. The interval identified by 2 is the most recently completed 15 minute interval. The interval identified by 97 is the oldest 15 minute interval. The interval identified by 98 is a total of the previous 96 stored 15 minute intervals.
I32 acSonetPath15MinuteIntervalStatus	1.3.6.1.4.1.2785.2.3.6.2.1.1.1.6	Integer32	read-only	This variable indicates the status of the interface. The acSonetPathCurrentStatus is a bit map represented as a sum, therefore, it can represent multiple defects simultaneously. The acSonetPathNoDefect should be set if and only if no other flag is set. The various bit positions are: 1 acSonetPathNoDefect 2 acSonetPathSTSLOP 4 acSonetPathSTSAIS 8 acSonetPathSTSRDI 16 acSonetPathUnequipped 32 acSonetPathPayloadLabelMismatch
T/F acSonetPath15MinuteIntervalValidStats	1.3.6.1.4.1.2785.2.3.6.2.1.1.1.7	TruthValue	read-only	This variable indicates if the data for this interval is valid.
T/F acSonetPath15MinuteIntervalResetStats	1.3.6.1.4.1.2785.2.3.6.2.1.1.1.8	TruthValue	read-write	This flag is used to reset the data for a 15 minute interval.
NUM acSonetPath15MinuteIntervalESs	1.3.6.1.4.1.2785.2.3.6.2.1.1.1.9	PerfIntervalCount	read-only	The counter associated with the number of Errored Seconds encountered by a SONET/SDH Path in the current 15 minute interval.
NUM acSonetPath15MinuteIntervalSESs	1.3.6.1.4.1.2785.2.3.6.2.1.1.1.10	PerfIntervalCount	read-only	The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Path in the current 15 minute interval.
NUM acSonetPath15MinuteIntervalCVs	1.3.6.1.4.1.2785.2.3.6.2.1.1.1.11	PerfIntervalCount	read-only	The counter associated with the number of Coding Violations encountered by a SONET/SDH Path in the current 15 minute interval.
NUM acSonetPath15MinuteIntervalUASs	1.3.6.1.4.1.2785.2.3.6.2.1.1.1.12	PerfIntervalCount	read-only	The counter associated with the number of Unavailable Seconds encountered by a Path in the current 15 minute interval.
NUM acSonetPath15MinuteIntervalBER	1.3.6.1.4.1.2785.2.3.6.2.1.1.1.13	PerfIntervalCount	read-only	The counter associated with the BER encountered by a Path in the current 15 minute interval. Represents the max value for an interval for number > 1.
acSonetPathDayIntervalTable	1.3.6.1.4.1.2785.2.3.6.2.1.2		not-accessible	The SONET/SDH Path Day Interval table.
acSonetPathDayIntervalEntry	1.3.6.1.4.1.2785.2.3.6.2.1.2.1		not-accessible	An entry in the SONET/SDH Path Day Interval table.
ACN acSonetPathDayIntervalNodeId	1.3.6.1.4.1.2785.2.3.6.2.1.2.1.1	AcNodeId	accessible-for-notify	The node id is the id for this specific node in the OSAP ring.
ACS acSonetPathDayIntervalSlot	1.3.6.1.4.1.2785.2.3.6.2.1.2.1.2	AcSlotNumber	accessible-for-notify	The physical slot number of the port.
ACP acSonetPathDayIntervalPort	1.3.6.1.4.1.2785.2.3.6.2.1.2.1.3	AcPortNumber	accessible-for-notify	The physical port number of the port.
INT acSonetPathDayIntervalPath	1.3.6.1.4.1.2785.2.3.6.2.1.2.1.4	INTEGER	accessible-for-notify	The STS Path for which the set of statistics is available.
INT acSonetPathDayIntervalNumber	1.3.6.1.4.1.2785.2.3.6.2.1.2.1.5	INTEGER	accessible-for-notify	A number between 1 and 31, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the ongoing, current day performance monitoring interval. The interval identified by 2 is the most recently completed day interval. The interval identified by 31 is the oldest day interval.
I32 acSonetPathDayIntervalStatus	1.3.6.1.4.1.2785.2.3.6.2.1.2.1.6	Integer32	read-only	This variable indicates the status of the interface. The acSonetPathCurrentStatus is a bit map represented as a sum, therefore, it can represent multiple defects simultaneously. The acSonetPathNoDefect should be set if and only if no other flag is set. The various bit positions are: 1 acSonetPathNoDefect 2 acSonetPathSTSLOP 4 acSonetPathSTSAIS 8 acSonetPathSTSRDI 16 acSonetPathUnequipped 32 acSonetPathPayloadLabelMismatch
T/F acSonetPathDayIntervalValidStats	1.3.6.1.4.1.2785.2.3.6.2.1.2.1.7	TruthValue	read-only	This variable indicates if the data for this day is valid.
T/F acSonetPathDayIntervalResetStats	1.3.6.1.4.1.2785.2.3.6.2.1.2.1.8	TruthValue	read-write	This flag is used to reset the data for day interval.
NUM acSonetPathDayIntervalESs	1.3.6.1.4.1.2785.2.3.6.2.1.2.1.9	PerfIntervalCount	read-only	The counter associated with the number of Errored Seconds encountered by a SONET/SDH Path in the past day interval.
NUM acSonetPathDayIntervalSESs	1.3.6.1.4.1.2785.2.3.6.2.1.2.1.10	PerfIntervalCount	read-only	The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Path in the past day interval.
NUM acSonetPathDayIntervalCVs	1.3.6.1.4.1.2785.2.3.6.2.1.2.1.11	PerfIntervalCount	read-only	The counter associated with the number of Coding Violations encountered by a SONET/SDH Path in the past day interval.
NUM acSonetPathDayIntervalUASs	1.3.6.1.4.1.2785.2.3.6.2.1.2.1.12	PerfIntervalCount	read-only	The counter associated with the number of Unavailable Seconds encountered by a Path in the past day interval.
NUM acSonetPathDayIntervalBER	1.3.6.1.4.1.2785.2.3.6.2.1.2.1.13	PerfIntervalCount	read-only	The counter associated with the BER encountered by a Path in the past day interval.
acSonetPathThresholdTable	1.3.6.1.4.1.2785.2.3.6.2.1.3		not-accessible	The SONET/SDH Path Threshold Table.
acSonetPathThresholdEntry	1.3.6.1.4.1.2785.2.3.6.2.1.3.1		not-accessible	An entry in the SONET/SDH Path Threshold Table.
ACN acSonetPathThresholdNodeId	1.3.6.1.4.1.2785.2.3.6.2.1.3.1.1	AcNodeId	accessible-for-notify	The node id is the id for this specific node in the OSAP ring.
ACS acSonetPathThresholdSlot	1.3.6.1.4.1.2785.2.3.6.2.1.3.1.2	AcSlotNumber	accessible-for-notify	The physical slot number of the port.
ACP acSonetPathThresholdPort	1.3.6.1.4.1.2785.2.3.6.2.1.3.1.3	AcPortNumber	accessible-for-notify	The physical port number of the port.
INT acSonetPathThresholdPath	1.3.6.1.4.1.2785.2.3.6.2.1.3.1.4	INTEGER	accessible-for-notify	The STS Path for which the set of statistics is available.
INT acSonetPathThresholdSelectionNum	1.3.6.1.4.1.2785.2.3.6.2.1.3.1.5	INTEGER	accessible-for-notify	A number that selects either the 15 thresholds or the day thresholds.
ACA acSonetPathThresholdAdminStatus	1.3.6.1.4.1.2785.2.3.6.2.1.3.1.6	AcAdminStatus	read-write	This field is used by the administrator to ensure only one client is performing management operations on this serial port at a time. When the field is read as available(0), the client can write the value locked(1) into this field to prevent a second client from performing managment ops on this instance.
INT acSonetPathThresholdESs	1.3.6.1.4.1.2785.2.3.6.2.1.3.1.7	INTEGER	read-write	The threshold associated with Errored Seconds.
INT acSonetPathThresholdSESs	1.3.6.1.4.1.2785.2.3.6.2.1.3.1.8	INTEGER	read-write	The threshold associated with Severely Errored Seconds.
INT acSonetPathThresholdCVs	1.3.6.1.4.1.2785.2.3.6.2.1.3.1.9	INTEGER	read-write	The threshold associated with Coding Violations.
INT acSonetPathThresholdUASs	1.3.6.1.4.1.2785.2.3.6.2.1.3.1.10	INTEGER	read-write	The threshold associated with Unavailable Seconds.
acSonetPathRDITable	1.3.6.1.4.1.2785.2.3.6.2.1.4		not-accessible	The SONET/SDH Path RDI Table.
acSonetPathRDIEntry	1.3.6.1.4.1.2785.2.3.6.2.1.4.1		not-accessible	An entry in the SONET/SDH Path RDI Table.
ACN acSonetPathRDINodeId	1.3.6.1.4.1.2785.2.3.6.2.1.4.1.1	AcNodeId	accessible-for-notify	The node id is the id for this specific node in the OSAP ring.
ACS acSonetPathRDISlot	1.3.6.1.4.1.2785.2.3.6.2.1.4.1.2	AcSlotNumber	accessible-for-notify	The physical slot number of the port.
ACP acSonetPathRDIPort	1.3.6.1.4.1.2785.2.3.6.2.1.4.1.3	AcPortNumber	accessible-for-notify	The physical port number of the port.
INT acSonetPathRDIPath	1.3.6.1.4.1.2785.2.3.6.2.1.4.1.4	INTEGER	accessible-for-notify	The STS path instance for this port
INT acSonetPathRDIOpMode	1.3.6.1.4.1.2785.2.3.6.2.1.4.1.5	INTEGER	read-write	The Remote Defect Indiction signals have undergone a number of changes over the years, and now encompass two or even three different versions. See GR-253 6.2.1.3.2 for more information.
acSonetPathTIMTable	1.3.6.1.4.1.2785.2.3.6.2.1.5		not-accessible	The SONET/SDH Path Trace Identifier Mismatch Table.
acSonetPathTIMEntry	1.3.6.1.4.1.2785.2.3.6.2.1.5.1		not-accessible	An entry in the SONET/SDH Path Trace Identifier Mismatch Table.
ACN acSonetPathTIMNodeId	1.3.6.1.4.1.2785.2.3.6.2.1.5.1.1	AcNodeId	accessible-for-notify	The node id is the id for this specific node in the OSAP ring.
ACS acSonetPathTIMSlot	1.3.6.1.4.1.2785.2.3.6.2.1.5.1.2	AcSlotNumber	accessible-for-notify	The physical slot number of the port.
ACP acSonetPathTIMPort	1.3.6.1.4.1.2785.2.3.6.2.1.5.1.3	AcPortNumber	accessible-for-notify	The physical port number of the port.
INT acSonetPathTIMPath	1.3.6.1.4.1.2785.2.3.6.2.1.5.1.4	INTEGER	accessible-for-notify	The path instance of the port.
T/F acSonetPathTIMGenerateEnable	1.3.6.1.4.1.2785.2.3.6.2.1.5.1.5	TruthValue	read-write	Enables the generation of the Path Trace Identifier.
T/F acSonetPathTIMDetectEnable	1.3.6.1.4.1.2785.2.3.6.2.1.5.1.6	TruthValue	read-write	Enables the detection of the Path Trace Identifier.
STR acSonetPathTIMTransmitedString	1.3.6.1.4.1.2785.2.3.6.2.1.5.1.7	AcTraceString	read-write	The string that gets sent to the destination.
STR acSonetPathTIMExpectedString	1.3.6.1.4.1.2785.2.3.6.2.1.5.1.8	AcTraceString	read-write	The expected string that is to be received.
STR acSonetPathTIMReceivedString	1.3.6.1.4.1.2785.2.3.6.2.1.5.1.9	AcTraceString	read-only	The contents of the string that is received.
T/F acSonetPathTIMFailure	1.3.6.1.4.1.2785.2.3.6.2.1.5.1.10	TruthValue	read-only	Failure declared of the Path Trace Identifier.
INT acSonetPathTIMFormat	1.3.6.1.4.1.2785.2.3.6.2.1.5.1.11	INTEGER	read-write	Format of Path Trace buffer.
T/F acSonetPathTIMMismatchZeros	1.3.6.1.4.1.2785.2.3.6.2.1.5.1.12	TruthValue	read-write	Controls whether a received trace message containing all zeros can cause a mismatch defect.
acSonetPathPLMTable	1.3.6.1.4.1.2785.2.3.6.2.1.6		not-accessible	The SONET/SDH Path Payload Label Mismatch Table.
acSonetPathPLMEntry	1.3.6.1.4.1.2785.2.3.6.2.1.6.1		not-accessible	An entry in the SONET/SDH Path Payload Label Mismatch Table.
ACN acSonetPathPLMNodeId	1.3.6.1.4.1.2785.2.3.6.2.1.6.1.1	AcNodeId	accessible-for-notify	The node id is the id for this specific node in the OSAP ring.
ACS acSonetPathPLMSlot	1.3.6.1.4.1.2785.2.3.6.2.1.6.1.2	AcSlotNumber	accessible-for-notify	The physical slot number of the port.
ACP acSonetPathPLMPort	1.3.6.1.4.1.2785.2.3.6.2.1.6.1.3	AcPortNumber	accessible-for-notify	The physical port number of the port.
INT acSonetPathPLMPath	1.3.6.1.4.1.2785.2.3.6.2.1.6.1.4	INTEGER	accessible-for-notify	The path instance of the port.
T/F acSonetPathPLMDetectEnable	1.3.6.1.4.1.2785.2.3.6.2.1.6.1.5	TruthValue	read-write	Enables the detection of the Path Payload Label.
INT acSonetPathPLMTransmitedValue	1.3.6.1.4.1.2785.2.3.6.2.1.6.1.6	INTEGER	read-write	The Path Payload Label that gets sent to the destination. See GR-253 Tables 3-2, 3-3.
INT acSonetPathPLMExpectedValue	1.3.6.1.4.1.2785.2.3.6.2.1.6.1.7	INTEGER	read-write	The expected Path Payload Label that is to be received. See GR-253 Tables 3-2, 3-3.
INT acSonetPathPLMReceivedValue	1.3.6.1.4.1.2785.2.3.6.2.1.6.1.8	INTEGER	read-only	The contents of the Path Payload Label that is received. See GR-253 Tables 3-2, 3-3.
T/F acSonetPathPLMMismatchFailure	1.3.6.1.4.1.2785.2.3.6.2.1.6.1.9	TruthValue	read-only	Mismatch failure declared for the Path Payload Label.
T/F acSonetPathPLMUnequipped	1.3.6.1.4.1.2785.2.3.6.2.1.6.1.10	TruthValue	read-only	Unequipped failure declared for the Path Payload Label.
acSonetPathProtectionTable	1.3.6.1.4.1.2785.2.3.6.2.1.7		not-accessible	The SONET/SDH Path Protection table.
acSonetPathProtectionEntry	1.3.6.1.4.1.2785.2.3.6.2.1.7.1		not-accessible	An entry in the SONET/SDH Path Protection table.
ACN acSonetPathProtectionNodeId	1.3.6.1.4.1.2785.2.3.6.2.1.7.1.1	AcNodeId	accessible-for-notify	The node id is the id for this specific node in the OSAP ring.
ACS acSonetPathProtectionSlot	1.3.6.1.4.1.2785.2.3.6.2.1.7.1.2	AcSlotNumber	accessible-for-notify	The physical slot number of the port.
ACP acSonetPathProtectionPort	1.3.6.1.4.1.2785.2.3.6.2.1.7.1.3	AcPortNumber	accessible-for-notify	The physical port number of the port.
INT acSonetPathProtectionPath	1.3.6.1.4.1.2785.2.3.6.2.1.7.1.4	INTEGER	accessible-for-notify	The STS-1 path for the port.
INT acSonetPathProtectionSwitchType	1.3.6.1.4.1.2785.2.3.6.2.1.7.1.5	INTEGER	read-write	This variable defines the path switch type as either revertive or nonrevertive.
I32 acSonetPathProtectionSFThreshold	1.3.6.1.4.1.2785.2.3.6.2.1.7.1.6	Integer32	read-write	The threshold associated with Signal Fail (SF). This value determines the BER level for protection switching. The value used is the exponent to a power of 10, so 3 means 10E-3.
I32 acSonetPathProtectionSDThreshold	1.3.6.1.4.1.2785.2.3.6.2.1.7.1.7	Integer32	read-write	The threshold associated with Signal Degrade (SD). This value determines the BER level for protection switching. The value used is the exponent to a power of 10, so 6 means 10E-6.
T/F acSonetPathProtectionActiveTraffic	1.3.6.1.4.1.2785.2.3.6.2.1.7.1.8	TruthValue	read-only	This variable indicates when ODP or UPSR active traffic is on this path.
T/F acSonetPathProtectionProtectionSwitch	1.3.6.1.4.1.2785.2.3.6.2.1.7.1.9	TruthValue	read-only	This variable indicates when either a UPSR or an ODP protection switch is currently affecting this path.
I32 acSonetPathProtectionWTRTime	1.3.6.1.4.1.2785.2.3.6.2.1.7.1.10	Integer32	read-write	This variable defines the ODP or UPSR Wait To Restore time. The time has one second granularity and may have a value in the range from 1 second to 720 seconds(12 minutes).
I32 acSonetPathProtectionWTITime	1.3.6.1.4.1.2785.2.3.6.2.1.7.1.11	Integer32	read-write	This variable defines the ODP Wait To Idle time. The time has one second granularity and may have a value in the range from 1 to 50 seconds.
I32 acSonetPathProtectionWTCTime	1.3.6.1.4.1.2785.2.3.6.2.1.7.1.12	Integer32	read-write	This variable defines the ODP Wait To Clear time. The time has one second granularity and may have a value in the range from 1 second to 720 seconds (12 minutes).
I32 acSonetPathProtectionWTRelTime	1.3.6.1.4.1.2785.2.3.6.2.1.7.1.13	Integer32	read-write	This variable defines the ODP Wait To Release time. The time has one second granularity and may have a value in the range from 1 to 50 seconds.
INT acSonetPathProtectionManSwitch	1.3.6.1.4.1.2785.2.3.6.2.1.7.1.14	INTEGER	read-write	This variable defines the ODP and UPSR manually initiated commands. Entries 7..10 are used in ODP only.
INT acSonetPathProtectionSwitchOpStatus	1.3.6.1.4.1.2785.2.3.6.2.1.7.1.15	INTEGER	read-only	This variable defines the current switch condition of an ODP path.
INT acSonetPathProtectionProtectionMode	1.3.6.1.4.1.2785.2.3.6.2.1.7.1.16	INTEGER	read-write	!! This object MUST be set before any other object is accessed. !! This is the type of protection switching to be used if independent path level protection switching is enabled. This is similar to the acTimeSlotPathProtectionMode object that resides in the timeslot table. Refer to it for a description of the enumerations.
acSonetFarEndPath	1.3.6.1.4.1.2785.2.3.6.2.2
acSonetFarEndPath15MinuteIntervalTable	1.3.6.1.4.1.2785.2.3.6.2.2.1		not-accessible	The SONET/SDH FarEndPath 15Minute Interval table.
acSonetFarEndPath15MinuteIntervalEntry	1.3.6.1.4.1.2785.2.3.6.2.2.1.1		not-accessible	An entry in the SONET/SDH FarEndPath 15Minute Interval table.
ACN acSonetFarEndPath15MinuteIntervalNodeId	1.3.6.1.4.1.2785.2.3.6.2.2.1.1.1	AcNodeId	accessible-for-notify	The node id is the id for this specific node in the OSAP ring.
ACS acSonetFarEndPath15MinuteIntervalSlot	1.3.6.1.4.1.2785.2.3.6.2.2.1.1.2	AcSlotNumber	accessible-for-notify	The physical slot number of the port.
ACP acSonetFarEndPath15MinuteIntervalPort	1.3.6.1.4.1.2785.2.3.6.2.2.1.1.3	AcPortNumber	accessible-for-notify	The physical port number of the port.
INT acSonetFarEndPath15MinuteIntervalPath	1.3.6.1.4.1.2785.2.3.6.2.2.1.1.4	INTEGER	accessible-for-notify	The STS Path for which the set of statistics is available.
INT acSonetFarEndPath15MinuteIntervalNumber	1.3.6.1.4.1.2785.2.3.6.2.2.1.1.5	INTEGER	accessible-for-notify	A number between 1 and 98, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the ongoing, current 15 minute interval. The interval identified by 2 is the most recently completed 15 minute interval. The interval identified by 97 is the oldest 15 minute interval. The interval identified by 98 is a total of the previous 96 stored 15 minute intervals.
T/F acSonetFarEndPath15MinuteIntervalValidStats	1.3.6.1.4.1.2785.2.3.6.2.2.1.1.6	TruthValue	read-only	This variable indicates if the data for this far end 15 minute interval is valid.
T/F acSonetFarEndPath15MinuteIntervalResetStats	1.3.6.1.4.1.2785.2.3.6.2.2.1.1.7	TruthValue	read-write	This flag is used to reset the data for far end 15 minute interval.
NUM acSonetFarEndPath15MinuteIntervalESs	1.3.6.1.4.1.2785.2.3.6.2.2.1.1.8	PerfIntervalCount	read-only	The counter associated with the number of Errored Seconds encountered by a SONET/SDH FarEndPath in the current 15 minute interval.
NUM acSonetFarEndPath15MinuteIntervalSESs	1.3.6.1.4.1.2785.2.3.6.2.2.1.1.9	PerfIntervalCount	read-only	The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH FarEndPath in the current 15 minute interval.
NUM acSonetFarEndPath15MinuteIntervalCVs	1.3.6.1.4.1.2785.2.3.6.2.2.1.1.10	PerfIntervalCount	read-only	The counter associated with the number of Coding Violations encountered by a SONET/SDH FarEndPath in the current 15 minute interval.
NUM acSonetFarEndPath15MinuteIntervalUASs	1.3.6.1.4.1.2785.2.3.6.2.2.1.1.11	PerfIntervalCount	read-only	The counter associated with the number of Unavailable Seconds encountered by a FarEndPath in the current 15 minute interval.
acSonetFarEndPathDayIntervalTable	1.3.6.1.4.1.2785.2.3.6.2.2.2		not-accessible	The SONET/SDH FarEndPath Day Interval table.
acSonetFarEndPathDayIntervalEntry	1.3.6.1.4.1.2785.2.3.6.2.2.2.1		not-accessible	An entry in the SONET/SDH FarEndPath Day Interval table.
ACN acSonetFarEndPathDayIntervalNodeId	1.3.6.1.4.1.2785.2.3.6.2.2.2.1.1	AcNodeId	accessible-for-notify	The node id is the id for this specific node in the OSAP ring.
ACS acSonetFarEndPathDayIntervalSlot	1.3.6.1.4.1.2785.2.3.6.2.2.2.1.2	AcSlotNumber	accessible-for-notify	The physical slot number of the port.
ACP acSonetFarEndPathDayIntervalPort	1.3.6.1.4.1.2785.2.3.6.2.2.2.1.3	AcPortNumber	accessible-for-notify	The physical port number of the port.
INT acSonetFarEndPathDayIntervalPath	1.3.6.1.4.1.2785.2.3.6.2.2.2.1.4	INTEGER	accessible-for-notify	The STS Path for which the set of statistics is available.
INT acSonetFarEndPathDayIntervalNumber	1.3.6.1.4.1.2785.2.3.6.2.2.2.1.5	INTEGER	accessible-for-notify	A number between 1 and 31, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the ongoing, current day performance monitoring interval. The interval identified by 2 is the most recently completed day interval. The interval identified by 31 is the oldest day interval.
T/F acSonetFarEndPathDayIntervalValidStats	1.3.6.1.4.1.2785.2.3.6.2.2.2.1.6	TruthValue	read-only	This variable indicates if the data for this far end day interval is valid.
T/F acSonetFarEndPathDayIntervalResetStats	1.3.6.1.4.1.2785.2.3.6.2.2.2.1.7	TruthValue	read-write	This flag is used to reset the data for far end day interval.
NUM acSonetFarEndPathDayIntervalESs	1.3.6.1.4.1.2785.2.3.6.2.2.2.1.8	PerfIntervalCount	read-only	The counter associated with the number of Errored Seconds encountered by a SONET/SDH FarEndPath in the current 15 minute interval.
NUM acSonetFarEndPathDayIntervalSESs	1.3.6.1.4.1.2785.2.3.6.2.2.2.1.9	PerfIntervalCount	read-only	The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH FarEndPath in the current 15 minute interval.
NUM acSonetFarEndPathDayIntervalCVs	1.3.6.1.4.1.2785.2.3.6.2.2.2.1.10	PerfIntervalCount	read-only	The counter associated with the number of Coding Violations encountered by a SONET/SDH FarEndPath in the current 15 minute interval.
NUM acSonetFarEndPathDayIntervalUASs	1.3.6.1.4.1.2785.2.3.6.2.2.2.1.11	PerfIntervalCount	read-only	The counter associated with the number of Unavailable Seconds encountered by a FarEndPath in the current 15 minute interval.
acSonetFarEndPathThresholdTable	1.3.6.1.4.1.2785.2.3.6.2.2.3		not-accessible	The SONET/SDH FarEndPath Threshold Table.
acSonetFarEndPathThresholdEntry	1.3.6.1.4.1.2785.2.3.6.2.2.3.1		not-accessible	An entry in the SONET/SDH FarEndPath Threshold Table.
ACN acSonetFarEndPathThresholdNodeId	1.3.6.1.4.1.2785.2.3.6.2.2.3.1.1	AcNodeId	accessible-for-notify	The node id is the id for this specific node in the OSAP ring.
ACS acSonetFarEndPathThresholdSlot	1.3.6.1.4.1.2785.2.3.6.2.2.3.1.2	AcSlotNumber	accessible-for-notify	The physical slot number of the port.
ACP acSonetFarEndPathThresholdPort	1.3.6.1.4.1.2785.2.3.6.2.2.3.1.3	AcPortNumber	accessible-for-notify	The physical port number of the port.
INT acSonetFarEndPathThresholdPath	1.3.6.1.4.1.2785.2.3.6.2.2.3.1.4	INTEGER	accessible-for-notify	The STS Path for which the set of statistics is available.
INT acSonetFarEndPathThresholdSelectionNum	1.3.6.1.4.1.2785.2.3.6.2.2.3.1.5	INTEGER	accessible-for-notify	A number that selects either the 15 thresholds or the day thresholds.
ACA acSonetFarEndPathThresholdAdminStatus	1.3.6.1.4.1.2785.2.3.6.2.2.3.1.6	AcAdminStatus	read-write	This field is used by the administrator to ensure only one client is performing management operations on this serial port at a time. When the field is read as available(0), the client can write the value locked(1) into this field to prevent a second client from performing managment ops on this instance.
INT acSonetFarEndPathThresholdESs	1.3.6.1.4.1.2785.2.3.6.2.2.3.1.7	INTEGER	read-write	The threshold associated with Errored Seconds.
INT acSonetFarEndPathThresholdSESs	1.3.6.1.4.1.2785.2.3.6.2.2.3.1.8	INTEGER	read-write	The threshold associated with Severely Errored Seconds.
INT acSonetFarEndPathThresholdCVs	1.3.6.1.4.1.2785.2.3.6.2.2.3.1.9	INTEGER	read-write	The threshold associated with Coding Violations.
INT acSonetFarEndPathThresholdUASs	1.3.6.1.4.1.2785.2.3.6.2.2.3.1.10	INTEGER	read-write	The threshold associated with Unavailable Secondss.
acSonetObjectsVT	1.3.6.1.4.1.2785.2.3.6.3
acSonetVT	1.3.6.1.4.1.2785.2.3.6.3.1
acSonetVT15MinuteIntervalTable	1.3.6.1.4.1.2785.2.3.6.3.1.1		not-accessible	The SONET/SDH VT 15Minute Interval table.
acSonetVT15MinuteIntervalEntry	1.3.6.1.4.1.2785.2.3.6.3.1.1.1		not-accessible	An entry in the SONET/SDH VT 15Minute Interval table.
ACN acSonetVT15MinuteIntervalNodeId	1.3.6.1.4.1.2785.2.3.6.3.1.1.1.1	AcNodeId	accessible-for-notify	The node id is the id for this specific node in the OSAP ring.
ACS acSonetVT15MinuteIntervalSlot	1.3.6.1.4.1.2785.2.3.6.3.1.1.1.2	AcSlotNumber	accessible-for-notify	The physical slot number of the port.
ACP acSonetVT15MinuteIntervalPort	1.3.6.1.4.1.2785.2.3.6.3.1.1.1.3	AcPortNumber	accessible-for-notify	The physical port number of the port.
INT acSonetVT15MinuteIntervalVT	1.3.6.1.4.1.2785.2.3.6.3.1.1.1.4	INTEGER	accessible-for-notify	The VT for which the set of statistics is available.
INT acSonetVT15MinuteIntervalNumber	1.3.6.1.4.1.2785.2.3.6.3.1.1.1.5	INTEGER	accessible-for-notify	A number between 1 and 98, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the ongoing, current 15 minute interval. The interval identified by 2 is the most recently completed 15 minute interval. The interval identified by 97 is the oldest 15 minute interval. The interval identified by 98 is a total of the previous 96 stored 15 minute intervals.
I32 acSonetVT15MinuteIntervalStatus	1.3.6.1.4.1.2785.2.3.6.3.1.1.1.7	Integer32	read-only	This variable indicates the status of the interface. The acSonetVTCurrentStatus is a bit map represented as a sum, therefore, it can represent multiple defects and failures simultaneously. The acSonetVTNoDefect should be set if and only if no other flag is set. The various bit positions are: 1 acSonetVTNoDefect 2 acSonetVTLOP 4 acSonetVTPathAIS 8 acSonetVTPathRDI 16 acSonetVTPathRFI 32 acSonetVTUnequipped 64 acSonetVTPayloadLabelMismatch
T/F acSonetVT15MinuteIntervalValidStats	1.3.6.1.4.1.2785.2.3.6.3.1.1.1.8	TruthValue	read-only	This variable indicates if the data for this VT 15 minute interval is valid.
T/F acSonetVT15MinuteIntervalResetStats	1.3.6.1.4.1.2785.2.3.6.3.1.1.1.9	TruthValue	read-write	This flag is used to reset the data for this VT 15 minute interval.
NUM acSonetVT15MinuteIntervalESs	1.3.6.1.4.1.2785.2.3.6.3.1.1.1.10	PerfIntervalCount	read-only	The counter associated with the number of Errored Seconds encountered by a SONET/SDH VT in the current 15 minute interval.
NUM acSonetVT15MinuteIntervalSESs	1.3.6.1.4.1.2785.2.3.6.3.1.1.1.11	PerfIntervalCount	read-only	The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH VT in the current 15 minute interval.
NUM acSonetVT15MinuteIntervalCVs	1.3.6.1.4.1.2785.2.3.6.3.1.1.1.12	PerfIntervalCount	read-only	The counter associated with the number of Coding Violations encountered by a SONET/SDH VT in the current 15 minute interval.
NUM acSonetVT15MinuteIntervalUASs	1.3.6.1.4.1.2785.2.3.6.3.1.1.1.13	PerfIntervalCount	read-only	The counter associated with the number of Unavailable Seconds encountered by a VT in the current 15 minute interval.
NUM acSonetVT15MinuteIntervalBER	1.3.6.1.4.1.2785.2.3.6.3.1.1.1.14	PerfIntervalCount	read-only	The counter associated with the BER encountered by a VT in the current 15 minute interval. Represents the max BER for the interval when number > 1.
acSonetVTDayIntervalTable	1.3.6.1.4.1.2785.2.3.6.3.1.2		not-accessible	The SONET/SDH VT Day Interval table.
acSonetVTDayIntervalEntry	1.3.6.1.4.1.2785.2.3.6.3.1.2.1		not-accessible	An entry in the SONET/SDH VT Day Interval table.
ACN acSonetVTDayIntervalNodeId	1.3.6.1.4.1.2785.2.3.6.3.1.2.1.1	AcNodeId	accessible-for-notify	The node id is the id for this specific node in the OSAP ring.
ACS acSonetVTDayIntervalSlot	1.3.6.1.4.1.2785.2.3.6.3.1.2.1.2	AcSlotNumber	accessible-for-notify	The physical slot number of the port.
ACP acSonetVTDayIntervalPort	1.3.6.1.4.1.2785.2.3.6.3.1.2.1.3	AcPortNumber	accessible-for-notify	The physical port number of the port.
INT acSonetVTDayIntervalVT	1.3.6.1.4.1.2785.2.3.6.3.1.2.1.4	INTEGER	accessible-for-notify	The VT for which the set of statistics is available.
INT acSonetVTDayIntervalNumber	1.3.6.1.4.1.2785.2.3.6.3.1.2.1.5	INTEGER	accessible-for-notify	A number between 1 and 31, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the ongoing, current day performance monitoring interval. The interval identified by 2 is the most recently completed day interval. The interval identified by 31 is the oldest day interval.
I32 acSonetVTDayIntervalStatus	1.3.6.1.4.1.2785.2.3.6.3.1.2.1.6	Integer32	read-only	This variable indicates the status of the interface. The acSonetVTCurrentStatus is a bit map represented as a sum, therefore, it can represent multiple defects and failures simultaneously. The acSonetVTNoDefect should be set if and only if no other flag is set. The various bit positions are: 1 acSonetVTNoDefect 2 acSonetVTLOP 4 acSonetVTPathAIS 8 acSonetVTPathRDI 16 acSonetVTPathRFI 32 acSonetVTUnequipped 64 acSonetVTPayloadLabelMismatch
T/F acSonetVTDayIntervalValidStats	1.3.6.1.4.1.2785.2.3.6.3.1.2.1.7	TruthValue	read-only	This variable indicates if the data for this VT Day interval is valid.
T/F acSonetVTDayIntervalResetStats	1.3.6.1.4.1.2785.2.3.6.3.1.2.1.8	TruthValue	read-write	This flag is used to reset the data for this VT Day interval.
NUM acSonetVTDayIntervalESs	1.3.6.1.4.1.2785.2.3.6.3.1.2.1.9	PerfIntervalCount	read-only	The counter associated with the number of Errored Seconds encountered by a SONET/SDH VT in the last day interval.
NUM acSonetVTDayIntervalSESs	1.3.6.1.4.1.2785.2.3.6.3.1.2.1.10	PerfIntervalCount	read-only	The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH VT in the last day interval.
NUM acSonetVTDayIntervalCVs	1.3.6.1.4.1.2785.2.3.6.3.1.2.1.11	PerfIntervalCount	read-only	The counter associated with the number of Coding Violations encountered by a SONET/SDH VT in the last day interval.
NUM acSonetVTDayIntervalUASs	1.3.6.1.4.1.2785.2.3.6.3.1.2.1.12	PerfIntervalCount	read-only	The counter associated with the number of Unavailable Seconds encountered by a VT in the last day interval.
NUM acSonetVTDayIntervalBER	1.3.6.1.4.1.2785.2.3.6.3.1.2.1.13	PerfIntervalCount	read-only	The counter associated with the max BER encountered by a VT in a day.
acSonetVTThresholdTable	1.3.6.1.4.1.2785.2.3.6.3.1.3		not-accessible	The SONET/SDH VT Threshold Table.
acSonetVTThresholdEntry	1.3.6.1.4.1.2785.2.3.6.3.1.3.1		not-accessible	An entry in the SONET/SDH VT Threshold Table.
ACN acSonetVTThresholdNodeId	1.3.6.1.4.1.2785.2.3.6.3.1.3.1.1	AcNodeId	accessible-for-notify	The node id is the id for this specific node in the OSAP ring.
ACS acSonetVTThresholdSlot	1.3.6.1.4.1.2785.2.3.6.3.1.3.1.2	AcSlotNumber	accessible-for-notify	The physical slot number of the port.
ACP acSonetVTThresholdPort	1.3.6.1.4.1.2785.2.3.6.3.1.3.1.3	AcPortNumber	accessible-for-notify	The physical port number of the port.
INT acSonetVTThresholdVT	1.3.6.1.4.1.2785.2.3.6.3.1.3.1.4	INTEGER	accessible-for-notify	The VT for which the set of statistics is available.
INT acSonetVTThresholdSelectionNum	1.3.6.1.4.1.2785.2.3.6.3.1.3.1.5	INTEGER	accessible-for-notify	A number that selects either the 15 thresholds or the day thresholds.
ACA acSonetVTThresholdAdminStatus	1.3.6.1.4.1.2785.2.3.6.3.1.3.1.6	AcAdminStatus	read-write	This field is used by the administrator to ensure only one client is performing management operations on this serial port at a time. When the field is read as available(0), the client can write the value locked(1) into this field to prevent a second client from performing managment ops on this instance.
INT acSonetVTThresholdESs	1.3.6.1.4.1.2785.2.3.6.3.1.3.1.7	INTEGER	read-write	The threshold associated with Errored Seconds.
INT acSonetVTThresholdSESs	1.3.6.1.4.1.2785.2.3.6.3.1.3.1.8	INTEGER	read-write	The threshold associated with Severely Errored Seconds.
INT acSonetVTThresholdCVs	1.3.6.1.4.1.2785.2.3.6.3.1.3.1.9	INTEGER	read-write	The threshold associated with Coding Violations.
INT acSonetVTThresholdUASs	1.3.6.1.4.1.2785.2.3.6.3.1.3.1.10	INTEGER	read-write	The threshold associated with Unavailable Secondss.
acSonetVTRDITable	1.3.6.1.4.1.2785.2.3.6.3.1.4		not-accessible	The SONET/SDH VT RDI Table.
acSonetVTRDIEntry	1.3.6.1.4.1.2785.2.3.6.3.1.4.1		not-accessible	An entry in the SONET/SDH VT RDI Table.
ACN acSonetVTRDINodeId	1.3.6.1.4.1.2785.2.3.6.3.1.4.1.1	AcNodeId	accessible-for-notify	The node id is the id for this specific node in the OSAP ring.
ACS acSonetVTRDISlot	1.3.6.1.4.1.2785.2.3.6.3.1.4.1.2	AcSlotNumber	accessible-for-notify	The physical slot number of the port.
ACP acSonetVTRDIPort	1.3.6.1.4.1.2785.2.3.6.3.1.4.1.3	AcPortNumber	accessible-for-notify	The physical port number of the port.
INT acSonetVTRDIVT	1.3.6.1.4.1.2785.2.3.6.3.1.4.1.4	INTEGER	accessible-for-notify	The Virtual Tributary (VT) instance.
INT acSonetVTRDIOpMode	1.3.6.1.4.1.2785.2.3.6.3.1.4.1.5	INTEGER	read-write	The Remote Defect Indiction signals have undergone a number of changes over the years, and now encompass two or even three different versions. See GR-253 6.2.1.3.3 for more information.
acSonetVTPLMTable	1.3.6.1.4.1.2785.2.3.6.3.1.5		not-accessible	The SONET/SDH VT Payload Label Mismatch Table.
acSonetVTPLMEntry	1.3.6.1.4.1.2785.2.3.6.3.1.5.1		not-accessible	An entry in the SONET/SDH VT Payload Label Mismatch Table.
ACN acSonetVTPLMNodeId	1.3.6.1.4.1.2785.2.3.6.3.1.5.1.1	AcNodeId	accessible-for-notify	The node id is the id for this specific node in the OSAP ring.
ACS acSonetVTPLMSlot	1.3.6.1.4.1.2785.2.3.6.3.1.5.1.2	AcSlotNumber	accessible-for-notify	The physical slot number of the port.
ACP acSonetVTPLMPort	1.3.6.1.4.1.2785.2.3.6.3.1.5.1.3	AcPortNumber	accessible-for-notify	The physical port number of the port.
INT acSonetVTPLMVT	1.3.6.1.4.1.2785.2.3.6.3.1.5.1.4	INTEGER	accessible-for-notify	The Virtual Tributary (VT) instance.
T/F acSonetVTPLMDetectEnable	1.3.6.1.4.1.2785.2.3.6.3.1.5.1.5	TruthValue	read-write	Enables the detection of the VT Payload Label.
INT acSonetVTPLMTransmitedValue	1.3.6.1.4.1.2785.2.3.6.3.1.5.1.6	INTEGER	read-write	The VT Payload Label that gets sent to the destination. See GR-253 Tables 3-4.
INT acSonetVTPLMExpectedValue	1.3.6.1.4.1.2785.2.3.6.3.1.5.1.7	INTEGER	read-write	The expected VT Payload Label that is to be received. See GR-253 Tables 3-4.
INT acSonetVTPLMReceivedValue	1.3.6.1.4.1.2785.2.3.6.3.1.5.1.8	INTEGER	read-only	The contents of the VT Payload Label that is received. See GR-253 Tables 3-4.
T/F acSonetVTPLMMismatchFailure	1.3.6.1.4.1.2785.2.3.6.3.1.5.1.9	TruthValue	read-only	Mismatch failure declared for the VT Payload Label.
T/F acSonetVTPLMUnequipped	1.3.6.1.4.1.2785.2.3.6.3.1.5.1.10	TruthValue	read-only	Unequipped failure declared for the VT Payload Label.
acSonetVTProtectionTable	1.3.6.1.4.1.2785.2.3.6.3.1.6		not-accessible	The SONET/SDH VT Protection table.
acSonetVTProtectionEntry	1.3.6.1.4.1.2785.2.3.6.3.1.6.1		not-accessible	An entry in the SONET/SDH VT Protection table.
ACN acSonetVTProtectionNodeId	1.3.6.1.4.1.2785.2.3.6.3.1.6.1.1	AcNodeId	accessible-for-notify	The node id is the id for this specific node in the OSAP ring.
ACS acSonetVTProtectionSlot	1.3.6.1.4.1.2785.2.3.6.3.1.6.1.2	AcSlotNumber	accessible-for-notify	The physical slot number of the port.
ACP acSonetVTProtectionPort	1.3.6.1.4.1.2785.2.3.6.3.1.6.1.3	AcPortNumber	accessible-for-notify	The physical port number of the port.
INT acSonetVTProtectionVT	1.3.6.1.4.1.2785.2.3.6.3.1.6.1.4	INTEGER	accessible-for-notify	The VT path instance for the port.
INT acSonetVTProtectionSwitchType	1.3.6.1.4.1.2785.2.3.6.3.1.6.1.5	INTEGER	read-write	This variable defines the VT path switch type as either revertive or nonrevertive.
I32 acSonetVTProtectionSFThreshold	1.3.6.1.4.1.2785.2.3.6.3.1.6.1.6	Integer32	read-write	The threshold associated with Signal Fail (SF). This value determines the BER level for protection switching.
I32 acSonetVTProtectionSDThreshold	1.3.6.1.4.1.2785.2.3.6.3.1.6.1.7	Integer32	read-write	The threshold associated with Signal Degrade (SD). This value determines the BER level for protection switching.
T/F acSonetVTProtectionProtectionSwitch	1.3.6.1.4.1.2785.2.3.6.3.1.6.1.8	TruthValue	read-only	This variable indicates when a protection switch is currently affecting this path.
I32 acSonetVTProtectionWTRTime	1.3.6.1.4.1.2785.2.3.6.3.1.6.1.9	Integer32	read-write	This variable defines the UPSR Wait To Restore time. The time has one second granularity and may have a value in the range from 1 second to 720 seconds(12 minutes).
INT acSonetVTProtectionManSwitch	1.3.6.1.4.1.2785.2.3.6.3.1.6.1.10	INTEGER	read-write	This variable defines the UPSR manually initiated commands.
T/F acSonetVTProtectionActiveTraffic	1.3.6.1.4.1.2785.2.3.6.3.1.6.1.11	TruthValue	read-only	This variable indicates when UPSR active traffic is on this path.
acSonetFarEndVT	1.3.6.1.4.1.2785.2.3.6.3.2
acSonetFarEndVT15MinuteIntervalTable	1.3.6.1.4.1.2785.2.3.6.3.2.1		not-accessible	The SONET/SDH FarEndVT 15Minute Interval table.
acSonetFarEndVT15MinuteIntervalEntry	1.3.6.1.4.1.2785.2.3.6.3.2.1.1		not-accessible	An entry in the SONET/SDH FarEndVT 15Minute Interval table.
ACN acSonetFarEndVT15MinuteIntervalNodeId	1.3.6.1.4.1.2785.2.3.6.3.2.1.1.1	AcNodeId	accessible-for-notify	The node id is the id for this specific node in the OSAP ring.
ACS acSonetFarEndVT15MinuteIntervalSlot	1.3.6.1.4.1.2785.2.3.6.3.2.1.1.2	AcSlotNumber	accessible-for-notify	The physical slot number of the port.
ACP acSonetFarEndVT15MinuteIntervalPort	1.3.6.1.4.1.2785.2.3.6.3.2.1.1.3	AcPortNumber	accessible-for-notify	The physical port number of the port.
INT acSonetFarEndVT15MinuteIntervalVT	1.3.6.1.4.1.2785.2.3.6.3.2.1.1.4	INTEGER	accessible-for-notify	The VT for which the set of statistics is available.
INT acSonetFarEndVT15MinuteIntervalNumber	1.3.6.1.4.1.2785.2.3.6.3.2.1.1.5	INTEGER	accessible-for-notify	A number between 1 and 98, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the ongoing, current 15 minute interval. The interval identified by 2 is the most recently completed 15 minute interval. The interval identified by 97 is the oldest 15 minute interval. The interval identified by 98 is a total of the previous 96 stored 15 minute intervals.
T/F acSonetFarEndVT15MinuteIntervalValidStats	1.3.6.1.4.1.2785.2.3.6.3.2.1.1.6	TruthValue	read-only	This variable indicates if the data for this VT FE 15 minute interval is valid.
T/F acSonetFarEndVT15MinuteIntervalResetStats	1.3.6.1.4.1.2785.2.3.6.3.2.1.1.7	TruthValue	read-write	This flag is used to reset the data for this VT FE 15 minute interval.
NUM acSonetFarEndVT15MinuteIntervalESs	1.3.6.1.4.1.2785.2.3.6.3.2.1.1.8	PerfIntervalCount	read-only	The counter associated with the number of Errored Seconds encountered by a SONET/SDH FarEndVT in the current 15 minute interval.
NUM acSonetFarEndVT15MinuteIntervalSESs	1.3.6.1.4.1.2785.2.3.6.3.2.1.1.9	PerfIntervalCount	read-only	The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH FarEndVT in the current 15 minute interval.
NUM acSonetFarEndVT15MinuteIntervalCVs	1.3.6.1.4.1.2785.2.3.6.3.2.1.1.10	PerfIntervalCount	read-only	The counter associated with the number of Coding Violations encountered by a SONET/SDH FarEndVT in the current 15 minute interval.
NUM acSonetFarEndVT15MinuteIntervalUASs	1.3.6.1.4.1.2785.2.3.6.3.2.1.1.11	PerfIntervalCount	read-only	The counter associated with the number of Unavailable Seconds encountered by a FarEndVT in the current 15 minute interval.
acSonetFarEndVTDayIntervalTable	1.3.6.1.4.1.2785.2.3.6.3.2.2		not-accessible	The SONET/SDH FarEndVT Day Interval table.
acSonetFarEndVTDayIntervalEntry	1.3.6.1.4.1.2785.2.3.6.3.2.2.1		not-accessible	An entry in the SONET/SDH FarEndVT Day Interval table.
ACN acSonetFarEndVTDayIntervalNodeId	1.3.6.1.4.1.2785.2.3.6.3.2.2.1.1	AcNodeId	accessible-for-notify	The node id is the id for this specific node in the OSAP ring.
ACS acSonetFarEndVTDayIntervalSlot	1.3.6.1.4.1.2785.2.3.6.3.2.2.1.2	AcSlotNumber	accessible-for-notify	The physical slot number of the port.
ACP acSonetFarEndVTDayIntervalPort	1.3.6.1.4.1.2785.2.3.6.3.2.2.1.3	AcPortNumber	accessible-for-notify	The physical port number of the port.
INT acSonetFarEndVTDayIntervalVT	1.3.6.1.4.1.2785.2.3.6.3.2.2.1.4	INTEGER	accessible-for-notify	The VT for which the set of statistics is available.
INT acSonetFarEndVTDayIntervalNumber	1.3.6.1.4.1.2785.2.3.6.3.2.2.1.5	INTEGER	accessible-for-notify	A number between 1 and 31, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the ongoing, current day performance monitoring interval. The interval identified by 2 is the most recently completed day interval. The interval identified by 31 is the oldest day interval.
T/F acSonetFarEndVTDayIntervalValidStats	1.3.6.1.4.1.2785.2.3.6.3.2.2.1.6	TruthValue	read-only	This variable indicates if the data for this VT Day interval is valid.
T/F acSonetFarEndVTDayIntervalResetStats	1.3.6.1.4.1.2785.2.3.6.3.2.2.1.7	TruthValue	read-write	This flag is used to reset the data for this VT Day interval.
NUM acSonetFarEndVTDayIntervalESs	1.3.6.1.4.1.2785.2.3.6.3.2.2.1.8	PerfIntervalCount	read-only	The counter associated with the number of Errored Seconds encountered by a SONET/SDH FarEndVT in the current 15 minute interval.
NUM acSonetFarEndVTDayIntervalSESs	1.3.6.1.4.1.2785.2.3.6.3.2.2.1.9	PerfIntervalCount	read-only	The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH FarEndVT in the current 15 minute interval.
NUM acSonetFarEndVTDayIntervalCVs	1.3.6.1.4.1.2785.2.3.6.3.2.2.1.10	PerfIntervalCount	read-only	The counter associated with the number of Coding Violations encountered by a SONET/SDH FarEndVT in the current 15 minute interval.
NUM acSonetFarEndVTDayIntervalUASs	1.3.6.1.4.1.2785.2.3.6.3.2.2.1.11	PerfIntervalCount	read-only	The counter associated with the number of Unavailable Seconds encountered by a FarEndVT in the current 15 minute interval.
acSonetFarEndVTThresholdTable	1.3.6.1.4.1.2785.2.3.6.3.2.3		not-accessible	The SONET/SDH FarEndVT Threshold Table.
acSonetFarEndVTThresholdEntry	1.3.6.1.4.1.2785.2.3.6.3.2.3.1		not-accessible	An entry in the SONET/SDH FarEndVT Threshold Table.
ACN acSonetFarEndVTThresholdNodeId	1.3.6.1.4.1.2785.2.3.6.3.2.3.1.1	AcNodeId	accessible-for-notify	The node id is the id for this specific node in the OSAP ring.
ACS acSonetFarEndVTThresholdSlot	1.3.6.1.4.1.2785.2.3.6.3.2.3.1.2	AcSlotNumber	accessible-for-notify	The physical slot number of the port.
ACP acSonetFarEndVTThresholdPort	1.3.6.1.4.1.2785.2.3.6.3.2.3.1.3	AcPortNumber	accessible-for-notify	The physical port number of the port.
INT acSonetFarEndVTThresholdVT	1.3.6.1.4.1.2785.2.3.6.3.2.3.1.4	INTEGER	accessible-for-notify	The VT for which the set of statistics is available.
INT acSonetFarEndVTThresholdSelectionNum	1.3.6.1.4.1.2785.2.3.6.3.2.3.1.5	INTEGER	accessible-for-notify	A number that selects either the 15 thresholds or the day thresholds.
ACA acSonetFarEndVTThresholdAdminStatus	1.3.6.1.4.1.2785.2.3.6.3.2.3.1.6	AcAdminStatus	read-write	This field is used by the administrator to ensure only one client is performing management operations on this serial port at a time. When the field is read as available(0), the client can write the value locked(1) into this field to prevent a second client from performing managment ops on this instance.
INT acSonetFarEndVTThresholdESs	1.3.6.1.4.1.2785.2.3.6.3.2.3.1.7	INTEGER	read-write	The threshold associated with Errored Seconds.
INT acSonetFarEndVTThresholdSESs	1.3.6.1.4.1.2785.2.3.6.3.2.3.1.8	INTEGER	read-write	The threshold associated with Severely Errored Seconds.
INT acSonetFarEndVTThresholdCVs	1.3.6.1.4.1.2785.2.3.6.3.2.3.1.9	INTEGER	read-write	The threshold associated with Coding Violations.
INT acSonetFarEndVTThresholdUASs	1.3.6.1.4.1.2785.2.3.6.3.2.3.1.10	INTEGER	read-write	The threshold associated with Unavailable Secondss.

RFC description

Appian Communications physical SONET port section, line, and path performance management.

Start monitoring Appian Communications OSAP SONET/optical access platform (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download APPIAN-PPORT-SONET-MIB

What Is APPIAN-PPORT-SONET-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description