| OID symbolic | OID numeric | Type | Access | Description |
|---|
| ACA acClassMapAdminStatus | 1.3.6.1.4.1.2785.2.8.1.3.1.2 | AcAdminStatus | read-create | The administrative status. |
| acClassMapEntry | 1.3.6.1.4.1.2785.2.8.1.3.1 | | not-accessible | A row in the class map provisioning table. |
| ACC acClassMapMapping | 1.3.6.1.4.1.2785.2.8.1.3.1.5 | AcClassMapping | read-create | This octet string defines a mapping between a field within a packet
payload and a 2-bit internal queue number. The octet string is a
list of queue numbers. Each octet contains a single 2-bit queue
number. In this product, 6-bits are wasted in each octet. In the
future we may support more queues per service in which case we will
extend the bit field in each octet.
When this map is used for 802.1p and MPLS, it must be exactly 8-octets
in length. For IP TOS, it must be 64-octets in length. |
| STR acClassMapName | 1.3.6.1.4.1.2785.2.8.1.3.1.3 | DisplayString | read-create | A textual string for easy naming of the classification mapping. |
| INT acClassMapNumber | 1.3.6.1.4.1.2785.2.8.1.3.1.1 | INTEGER | accessible-for-notify | A number to identify a classification mapping.
There can be at most four(4) rows for IP TOS based classification,
four(4) additional rows for MPLS experimental bits based classfication,
and four(4) additional rows for IEEE 802.1p based calssification.
This table can have at most 12 rows for this version of the Ethernet
access board. |
| acClassMapTable | 1.3.6.1.4.1.2785.2.8.1.3 | | not-accessible | Classification Map table. |
| INT acClassMapType | 1.3.6.1.4.1.2785.2.8.1.3.1.4 | INTEGER | read-create | The type of classification used. This parameter specifies what
fields in the packets are to be used for classification.
This in turn dictates the width of the mapping used in
acClassMapMapping. |
| acIas | 1.3.6.1.4.1.2785.2.8.2 | | | |
| INT acIasChannel | 1.3.6.1.4.1.2785.2.8.2.1.1.4 | INTEGER | accessible-for-notify | The service channel. |
| INT acIasCpeEncapsMode | 1.3.6.1.4.1.2785.2.8.2.1.1.10 | INTEGER | read-write | The type of encapsulation used for packets destined for the CPE.
unknown(0) - encapsulation mode is not set and is same as
learning(1) mode.
learning(1) - learn the encapsulation mode from the packets
generated by the CPE.
enet(2) - ethernet encapsulation.
snap(3) - SNAP encaspualtion mode. |
| IP acIasCpeIpAddress | 1.3.6.1.4.1.2785.2.8.2.1.1.8 | IpAddress | read-write | The IP address of the CPE device. This object is optional and if not
set, it will be learned by looking into traffic from the CPE device. |
| MAC acIasCpeMacAddress | 1.3.6.1.4.1.2785.2.8.2.1.1.9 | MacAddress | read-only | The MAC Address of the CPE router. |
| INT acIasDlci | 1.3.6.1.4.1.2785.2.8.2.1.1.5 | INTEGER | read-write | When an IAS service is carried over a FrameRelay trunk,
this attribute dictates the frame relay circuit (DLCI) to be used for
the service. When other types of trunks are used, this object has not
meaning and has the value of 0. |
| acIasEntry | 1.3.6.1.4.1.2785.2.8.2.1.1 | | not-accessible | A row within the IAS provisioning table. |
| ACN acIasNodeId | 1.3.6.1.4.1.2785.2.8.2.1.1.1 | AcNodeId | accessible-for-notify | The unique node identification number assigned by the EMS which
identifies the node where the IAS service is being configured. |
| T/F acIasPerformInverseArp | 1.3.6.1.4.1.2785.2.8.2.1.1.11 | TruthValue | read-write | Flag to indicate whether to perform Inverse ARP request to
learn the remote IP address. This is applicable if the service
is carried on a frame relay circuit.
**-DInitiate Inverse Arp** |
| ACP acIasPort | 1.3.6.1.4.1.2785.2.8.2.1.1.3 | AcPortNumber | accessible-for-notify | The physical port number on the i/o slot where this customers data
interface will reside. |
| IP acIasRemoteIpAddress | 1.3.6.1.4.1.2785.2.8.2.1.1.7 | IpAddress | read-write | The IP address of at the network side.
The object is optional. If set, ARP requests from the user
are responded if the target IP address matchs this object.
If this is object is not set, all ARP requests from the user
are responded.
If this object is not set, it may be learned from the inverse
ARP if the service is carried on a frame relay circuit. |
| T/F acIasRespondToArp | 1.3.6.1.4.1.2785.2.8.2.1.1.6 | TruthValue | read-write | Flag to indicate we should respond to ARP requests. |
| ACS acIasSlot | 1.3.6.1.4.1.2785.2.8.2.1.1.2 | AcSlotNumber | accessible-for-notify | The slot number where the physical data i/o port is located in
the OSAP chassis, which will have the IAS service configured. |
| acIasTable | 1.3.6.1.4.1.2785.2.8.2.1 | | not-accessible | The Internet Access Service table. |
| ACA acQosAdminStatus | 1.3.6.1.4.1.2785.2.8.1.2.1.3 | AcAdminStatus | read-create | The administrative status. |
| INT acQosClassMapping | 1.3.6.1.4.1.2785.2.8.1.2.1.6 | INTEGER | read-create | The object identifies a row in the classification mapping table. |
| acQosEntry | 1.3.6.1.4.1.2785.2.8.1.2.1 | | not-accessible | A row in the QOS template table. |
| ACN acQosNodeId | 1.3.6.1.4.1.2785.2.8.1.2.1.1 | AcNodeId | accessible-for-notify | A unique node identification number assigned by the EMS to uniquely
identify a node within an Appian Ring. |
| ACQ acQosQueueBuffCaps | 1.3.6.1.4.1.2785.2.8.1.2.1.7 | AcQueueBufferingCapacity | read-create | These values control the relative buffering capacities of the
four queues. Each byte represents the proportional buffering capacity out
of 100 for a queue. The sum of these bytes must equal to 100.
For example, if 2 queues are used, and the buffering capacities are 90
and 10, then acQosQueueBuffCaps should be set to '\0x5A\0x0A\0x00\0x00'. |
| ACQ acQosQueueWeights | 1.3.6.1.4.1.2785.2.8.1.2.1.5 | AcQueueWeights | read-create | The weighted values control relative bandwidth for each queue of the
four queues. Each byte represents the proportional weight out
of 100 for a queue. The sum of these bytes must equal to 100.
For example, if 2 queues are used, and the relative
weights (or priorities) are 90 and 10, then acQosQueueWeights should be
set to '\0x5A\0x0A\0x00\0x00'. |
| acQosTable | 1.3.6.1.4.1.2785.2.8.1.2 | | not-accessible | Table of QOS templates. |
| STR acQosTemplateName | 1.3.6.1.4.1.2785.2.8.1.2.1.4 | DisplayString | read-create | A textual string solely for easy identification of a template. |
| INT acQosTemplateNumber | 1.3.6.1.4.1.2785.2.8.1.2.1.2 | INTEGER | accessible-for-notify | A number identifies a QOS template. Also used as the index
into the QOS template table. |
| ACA acServiceAdminStatus | 1.3.6.1.4.1.2785.2.8.1.1.1.5 | AcAdminStatus | read-create | The administrative or desired status. |
| U32 acServiceBufferPool | 1.3.6.1.4.1.2785.2.8.1.1.1.17 | Unsigned32 | read-create | The buffer pool associated with this service. The default is 1 which
indicates the default buffer pool will be used. The value 0 is not
allowed and values greater than 1 are user defined buffer pools. |
| INT acServiceChannel | 1.3.6.1.4.1.2785.2.8.1.1.1.4 | INTEGER | accessible-for-notify | The service channel amongst the potentially multiple service channels on
a data access port. If only one service channel is provisioned, this
channel number should be a value of 1. If multiple service channels are
provisioned, the channel number should follow the ranges described below.
If multiple service channels are provisioned,each channel maps to a unique
802.1q VLAN tag used to effectively channalize the Ethernet.
4 service channels (1..4) are supported on the 100baseX Ethernet access
board. 255 service channels (1..255) are supported on the Gigabit,
1000baseX, Ethernet access board. |
| U32 acServiceDownstreamBuffCapWeight | 1.3.6.1.4.1.2785.2.8.1.1.1.15 | Unsigned32 | read-create | The weight associated with the downstream traffic on this service relating to
buffering capacity. Downstream traffic is defined as traffic that enters the
system from a trunk and exits the system on an access port. A value of 1
provides the least amount of buffering capacity while a value of 10 provides
the most buffering capacity. This value is relative in that the number of
buffers actually assigned to the downstream traffic depends on how many services
share the buffer pool associated with this service. |
| NTF acServiceDownTrap | 1.3.6.1.4.1.2785.2.8.0.2 | | | This trap indicates a service has become deactivated. The detailed code
indicates the reason why |
| acServiceEntry | 1.3.6.1.4.1.2785.2.8.1.1.1 | | not-accessible | A row equates to a service defined on a particular port and channel. |
| INT acServiceGBR | 1.3.6.1.4.1.2785.2.8.1.1.1.11 | INTEGER | read-create | The guaranteed bit rate in 1-kpbs increments.
On the access side of the service, It should not exceed the
maximum bandwidth of the access port. On the network side,
the sum of GBR's of all the services carried
by a trunk should not exceed the trunk capacity.
**NOADMINDOWN** |
| U32 acServiceLocalBuffCapWeight | 1.3.6.1.4.1.2785.2.8.1.1.1.16 | Unsigned32 | read-create | The weight associated with local traffic on this service relating to
buffering capacity. Local traffic is defined as traffic which enters the system
on an access port and exits the system on an access port. This value is therefore
only relevant for transparent LAN services with multiple local access ports.
This value is relative in that the number of buffers actually assigned to the
local traffic depends on how many services share the buffer pool associated with
this service. |
| INT acServiceMBR | 1.3.6.1.4.1.2785.2.8.1.1.1.12 | INTEGER | read-create | The maximum bit rate in 1-kbps increments. A service may
burst up to this rate, but there is no guarantee to the data
transmitted above the GBR. The MBR should not exceed the
access port capacity nor the trunk capacity.
**NOADMINDOWN** |
| ACN acServiceNodeId | 1.3.6.1.4.1.2785.2.8.1.1.1.1 | AcNodeId | accessible-for-notify | A unique node identification number assigned by the EMS to uniquely
identify a node within an Appian Ring. |
| ACO acServiceOpStatus | 1.3.6.1.4.1.2785.2.8.1.1.1.6 | AcOpStatus | read-only | The operational or actual status. |
| ACP acServicePort | 1.3.6.1.4.1.2785.2.8.1.1.1.3 | AcPortNumber | accessible-for-notify | The port number ranging from (1..8) where the physical i/o connection
for this customer service can be found. |
| INT acServiceQosTemplate | 1.3.6.1.4.1.2785.2.8.1.1.1.10 | INTEGER | read-create | This object specifies the QOS template to use. A QOS template
dictates the QOS model assigned to this subscriber service.
If zero(0), no differentiation is done and packets flow through
a single queue. |
| T/F acServiceResetStats | 1.3.6.1.4.1.2785.2.8.1.1.1.13 | TruthValue | read-create | Setting this varible to TRUE causes all service statistics counters
to reset. This variable always return FALSE as its value. |
| acServicesCommon | 1.3.6.1.4.1.2785.2.8.1 | | | Appian Communications OSAP Services MIB contain the definitions
for Internet Access (IAS) and Transparent LAN (TLS) services. |
| ACS acServiceSlot | 1.3.6.1.4.1.2785.2.8.1.1.1.2 | AcSlotNumber | accessible-for-notify | The slot number within the chassis where the physical i/o port can
be found for customer access. |
| INT acServiceStatChannel | 1.3.6.1.4.1.2785.2.8.1.4.1.4 | INTEGER | accessible-for-notify | The service queue is one of 4 queues where a service is provisioned.
Currently each (data) access port supports 4 service queues, each of
which can support a service.
The first release of our Ethernet access card supports a max of 4
services/port. In the future this range may increase but will always
be dependent upon the access card being provisioned . |
| C64 acServiceStatDownstreamBytes | 1.3.6.1.4.1.2785.2.8.1.4.1.12 | Counter64 | read-only | The number bytes transported from the network to the access port. |
| C64 acServiceStatDownstreamDroppedBytes | 1.3.6.1.4.1.2785.2.8.1.4.1.14 | Counter64 | read-only | The number bytes dropped in the direction of the network to the
access port. |
| C64 acServiceStatDownstreamDroppedFrames | 1.3.6.1.4.1.2785.2.8.1.4.1.13 | Counter64 | read-only | The number frames dropped in the direction of the network to the
access port. |
| C64 acServiceStatDownstreamFrames | 1.3.6.1.4.1.2785.2.8.1.4.1.11 | Counter64 | read-only | The number frames transported from the network to access port. |
| C64 acServiceStatDownstreamUnexpectedFrames | 1.3.6.1.4.1.2785.2.8.1.4.1.15 | Counter64 | read-only | The number of frames that are unexpected. An example would a frame
of wrong protocol type.
Such frames are silently dropped but not counted in the dropped
frames counter. |
| acServiceStatEntry | 1.3.6.1.4.1.2785.2.8.1.4.1 | | not-accessible | A set of counters collected for a service queue priority. |
| ACN acServiceStatNodeId | 1.3.6.1.4.1.2785.2.8.1.4.1.1 | AcNodeId | accessible-for-notify | A unique node identification number assigned by the EMS to uniquely
identify a node within an Appian Ring. |
| ACP acServiceStatPort | 1.3.6.1.4.1.2785.2.8.1.4.1.3 | AcPortNumber | accessible-for-notify | The port number ranging from (1..8) where the physical i/o connection
for this customer service can be found. |
| INT acServiceStatQueue | 1.3.6.1.4.1.2785.2.8.1.4.1.5 | INTEGER | accessible-for-notify | The service queuing priority. Service statistics is collected
for each service queuing priority. Current OSAP supports up to
4 priorities. If a service doesn't use a priority, the
corresponding entry has 0s for all counters. |
| ACS acServiceStatSlot | 1.3.6.1.4.1.2785.2.8.1.4.1.2 | AcSlotNumber | accessible-for-notify | The slot number within the chassis where the physical i/o port can
be found for customer access. |
| acServiceStatTable | 1.3.6.1.4.1.2785.2.8.1.4 | | not-accessible | The service statistics table.
Statistics is provided for each queue priority of a service. Consequently,
the table is composed of node, slot, port, channel, queue. |
| C64 acServiceStatUpstreamBytes | 1.3.6.1.4.1.2785.2.8.1.4.1.7 | Counter64 | read-only | The number bytes transported from the access port to the network. |
| C64 acServiceStatUpstreamDroppedBytes | 1.3.6.1.4.1.2785.2.8.1.4.1.9 | Counter64 | read-only | The number bytes dropped in the direction of the access port to
the network. |
| C64 acServiceStatUpstreamDroppedFrames | 1.3.6.1.4.1.2785.2.8.1.4.1.8 | Counter64 | read-only | The number frames dropped in the direction of the access port to
the network. |
| C64 acServiceStatUpstreamFramesEx | 1.3.6.1.4.1.2785.2.8.1.4.1.6 | Counter64 | read-only | The number frames transported from the access port to the network. |
| C64 acServiceStatUpstreamUnexpectedFrames | 1.3.6.1.4.1.2785.2.8.1.4.1.10 | Counter64 | read-only | The number of frames that are unexpected. An example would a frame
of wrong protocol type.
Such frames are silently dropped but not counted in the dropped
frames counter. |
| acServiceTable | 1.3.6.1.4.1.2785.2.8.1.1 | | not-accessible | This table is the common thread of all services, regardless of service
types, in other words, every service would have an entry in this table.
A service is identified by a tuple of {node, slot, port, channel}.
The {slot, port} pair identies the access port of a subscriber.
The port can support multiple services, and each such service is
identified by a 'service channel'.
To create a service, a row should be created in this table. When the
service type is set, a row is automatically 'created' in the
appropriate service type specific table. For example, to create an IAS
service, one first creates a row in this common table, and then set
acServiceType to IAS (which triggers the automatic creation of an
entry in the IAS service table), and then set the all necessary
parameters.
To remove a service, remove the row in this common table only. |
| acServiceTraps | 1.3.6.1.4.1.2785.2.8.0 | | | |
| INT acServiceTrunkNumber | 1.3.6.1.4.1.2785.2.8.1.1.1.9 | INTEGER | read-create | Identifies the trunk over which this access service is to be carried
onto the network. Maps to a row in the trunk table. |
| INT acServiceType | 1.3.6.1.4.1.2785.2.8.1.1.1.7 | INTEGER | read-create | Specifies the service type. Each row in this table has an associated
row in one of the service type specific tables. This object indicates
which table, IAS or TLS, has a row at the same index containing
additional parameters associated with this service. |
| U32 acServiceUpstreamBuffCapWeight | 1.3.6.1.4.1.2785.2.8.1.1.1.14 | Unsigned32 | read-create | The weight associated with the upstream traffic on this service relating to
buffering capacity. Upstream traffic is defined as traffic that enters the
system from an access port and exits the system on a trunk. A value of 1
provides the least amount of buffering capacity while a value of 10 provides
the most buffering capacity. This value is relative in that the number of
buffers actually assigned to the upstream traffic depends on how many services
share the buffer pool associated with this service. |
| NTF acServiceUpTrap | 1.3.6.1.4.1.2785.2.8.0.1 | | | This trap indicates a service has become active. |
| INT acServiceVlanId | 1.3.6.1.4.1.2785.2.8.1.1.1.8 | INTEGER | read-create | The VLAN ID attribute is only used when the enetEnableMultiService
flag has been set to true. The VLAN ID is a 12-bit VLAN ID and is
used when the OSAP is processing packets to differentiate between the
four service channels. This object must set if an access port supports
multiple services. VLAN ID is a 12-bit value and therefore the
value range is 0 to 4095. However value 0 is not a VLAN ID per
se, but rather a value indicating VLAN tagging is not used. |
| acTls | 1.3.6.1.4.1.2785.2.8.3 | | | |
| INT acTlsChannel | 1.3.6.1.4.1.2785.2.8.3.1.1.4 | INTEGER | accessible-for-notify | The service channel on which this TLS service is provisioned. |
| acTlsEntry | 1.3.6.1.4.1.2785.2.8.3.1.1 | | not-accessible | A row in the TLS table. |
| ACN acTlsNodeId | 1.3.6.1.4.1.2785.2.8.3.1.1.1 | AcNodeId | accessible-for-notify | The unique node number assigned by the EMS to uniquely
identify this node within an Appian Ring of OSAP's which
is configured for TLS service. |
| T/F acTlsPointToPointEnable | 1.3.6.1.4.1.2785.2.8.3.1.1.7 | TruthValue | read-write | Flag to indicate whether or not the TLAN over which this Tls
service is provisioned is a point to point TLAN. A point to
point TLAN is a TLAN with two and only two Tls services, virtual
ports. |
| ACP acTlsPort | 1.3.6.1.4.1.2785.2.8.3.1.1.3 | AcPortNumber | accessible-for-notify | The physical port number on the slot on which the TLS service is
provisioned. |
| INT acTlsServiceId | 1.3.6.1.4.1.2785.2.8.3.1.1.6 | INTEGER | read-write | An ID which is used within a TLS service to identify which service
packets are associated with as they traverse the TLS trunks.
Each Tls service, virtual port, configured needs an Id assigned
to it. Each packet received on this virtual port, subscriber port
and channel, is stamped with this value for its trip around a TLS
trunk. These tags are assigned by the EMS and must be unique on a
given TLS trunk. This value is a 10-bit number providing a range
of 1k. Values 1..15 are reserved. Value 0 is used for TLS
services that are not provisioned over a TLS trunk. These trunkless
TLS services perform only local switching. |
| T/F acTlsServiceIdSharingEnable | 1.3.6.1.4.1.2785.2.8.3.1.1.8 | TruthValue | read-write | Flag to indicate whether or not the Tls Servive Id is shared
between this service and other Tls Services provisioned on the
same TLS trunk either on this OSAP or different OSAPs. |
| ACS acTlsSlot | 1.3.6.1.4.1.2785.2.8.3.1.1.2 | AcSlotNumber | accessible-for-notify | The slot upon which the TLS service is being provisioned. |
| acTlsTable | 1.3.6.1.4.1.2785.2.8.3.1 | | not-accessible | The Transparent LAN Services table. |
| INT acTlsTlanId | 1.3.6.1.4.1.2785.2.8.3.1.1.5 | INTEGER | read-write | Identifies the Transparent LAN on which this virtual port,
subscriber port and channel, is participating. This is a
12-bit value and is assigned by the EMS to ensure it is global
to all TLS services and TLS trunks which share any common
OSAPs or L2 switches. Note: It is prudent to keep the TlanId
unique within the carriers entire TLS service offering until
the carrier starts another 'TLS service domain'.
WARNING: TLAN ID of zero(0) is invalid. TlanId's 1..15 are
reserved for managment access. TlanId's 16..4095 are legal
values. |
