ALVARION-DOT11-WLAN-MIB

All MIBs › ALVARION-DOT11-WLAN-MIB

Organization: Alvarion Ltd.

Last Updated: 2010-09-23

Category: DSL and Broadband, Wireless and WLAN

Description: Private MIB for Alvarion (now Cambium) BreezeACCESS wireless broadband access equipment, covering radio and WLAN management objects.

IPNetwork Monitor uses several OIDs from this MIB in network discovery and polling the applicable devices. Start monitoring ALVARION-DOT11-WLAN-MIB with a free 30-day trial of IPNetwork Monitor.

What Is ALVARION-DOT11-WLAN-MIB?

ALVARION-DOT11-WLAN-MIB is a private, proprietary MIB for Alvarion's BreezeACCESS VL, BreezeACCESS 4900, and BreezeNET-B wireless broadband access product line (now part of Cambium Networks), covering radio and WLAN link configuration. It exposes configuration data for radio transmit power limits, MAC-based access control deny lists, broadcast/multicast handling, and QoS traffic prioritization such as VLAN priority, ToS/IP-precedence/DSCP thresholds, and UDP/TCP port-based prioritization for RTP/RTCP voice traffic. Monitoring emphasis is mostly on configuration and radio-hardware operating parameters rather than classic environmental sensors: transmit-power tables let an admin verify a radio's actual power output stays within its configured maximum, and the MAC deny-list table reflects the current access-control/security posture of the link. It relates conceptually to IEEE 802.11 wireless standards and shares the "brzacc" (BreezeACCESS) object prefix with other Alvarion product MIBs. It is deployed on Alvarion BreezeACCESS VL, BreezeACCESS 4900, and BreezeNET-B base stations and subscriber units providing fixed wireless broadband access links. Engineers can download the ALVARION-DOT11-WLAN-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ALVARION-DOT11-WLAN-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Alvarion BreezeACCESS/BreezeNET wireless broadband base station/subscriber unit

Monitoring Examples

An administrator would poll brzaccVLNewTransmitPowerTable against brzaccVLNewMaximumTransmitPowerTable to confirm a radio link's actual transmit power hasn't drifted above its configured ceiling. Checking brzaccVLNewMacAddressDenyListTable and brzaccVLMacAddressDenyListAction audits which client MAC addresses are currently being blocked from associating. Reviewing brzaccVLIPDSCPThreshold and brzaccVLUdpPortPriRTPRTCP settings helps confirm voice traffic prioritization is configured correctly on a link experiencing call-quality complaints.

What Can Be Monitored

radio transmit power vs. maximum allowed
MAC address deny list entries
broadcast/multicast-to-unicast conversion setting
VLAN/ToS/DSCP QoS prioritization thresholds
UDP/TCP port-based traffic prioritization

Imported Objects

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32
enterprises

How to Use in IPNetwork Monitor

Example using brzaccVLSUPerModulationLevelCountersTxSuccess OID:

Select an Alvarion BreezeACCESS/BreezeNET wireless broadband equipment (legacy) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type brzaccVLSUPerModulationLevelCountersTxSuccess into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the applicable to SU/RB. The total number of successfully transmitted unicasts at the applicable modulation level. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
alvarion	1.3.6.1.4.1.12394
alvarionOID	1.3.6.1.4.1.12394.4
breezeAccessVLMib	1.3.6.1.4.1.12394.1.1			BreezeAccess VL, BreezeACCESS 4900, BreezeNET-B and BreezeACCESS-Security
brzAccess4900_AU_BS	1.3.6.1.4.1.12394.4.1.41
brzAccess4900_AU_SA	1.3.6.1.4.1.12394.4.1.42
brzAccess4900_SU_BD	1.3.6.1.4.1.12394.4.1.51
brzAccessAU_EZ	1.3.6.1.4.1.12394.4.1.8
brzAccessVL_AU	1.3.6.1.4.1.12394.4.1.70
brzAccessVL_SU	1.3.6.1.4.1.12394.4.1.75
brzAccessVLAU	1.3.6.1.4.1.12394.4.1.1
brzAccessVLAU_BS	1.3.6.1.4.1.12394.4.1.4
brzAccessVLAU_SA	1.3.6.1.4.1.12394.4.1.5
brzAccessVLAUS_BS	1.3.6.1.4.1.12394.4.1.6
brzAccessVLAUS_SA	1.3.6.1.4.1.12394.4.1.7
brzAccessVLOID	1.3.6.1.4.1.12394.4.1
brzAccessVLProducts	1.3.6.1.4.1.12394.4.1.3
brzAccessVLSU	1.3.6.1.4.1.12394.4.1.2
brzAccessVLSU_1_BD	1.3.6.1.4.1.12394.4.1.62
brzAccessVLSU_12_L	1.3.6.1.4.1.12394.4.1.65
brzAccessVLSU_24_BD	1.3.6.1.4.1.12394.4.1.13
brzAccessVLSU_3_1D	1.3.6.1.4.1.12394.4.1.16
brzAccessVLSU_3_4D	1.3.6.1.4.1.12394.4.1.17
brzAccessVLSU_3_L	1.3.6.1.4.1.12394.4.1.63
brzAccessVLSU_54_BD	1.3.6.1.4.1.12394.4.1.15
brzAccessVLSU_6_1D	1.3.6.1.4.1.12394.4.1.11
brzAccessVLSU_6_BD	1.3.6.1.4.1.12394.4.1.12
brzAccessVLSU_6_L	1.3.6.1.4.1.12394.4.1.64
brzAccessVLSU_8_BD	1.3.6.1.4.1.12394.4.1.61
brzAccessVLSU_BD	1.3.6.1.4.1.12394.4.1.14
brzAccessVLSU_EZ	1.3.6.1.4.1.12394.4.1.19
brzAccessVLSU_I	1.3.6.1.4.1.12394.4.1.18
brzAccessVLSU_V	1.3.6.1.4.1.12394.4.1.20
INT brzaccVLAccessToDHCP	1.3.6.1.4.1.12394.1.1.4.5	INTEGER	read-write	Applicable to all units. The port to be used for communicating with a DHCP server.
INT brzaccVLAccessToNwMng	1.3.6.1.4.1.12394.1.1.3.1	INTEGER	read-write	Applicable to all units. The port to be used for remote management.
INT brzaccVLAccessToNwTrap	1.3.6.1.4.1.12394.1.1.3.6	INTEGER	read-write	Applicable to all units. Enables or disables sending of traps.
INT brzaccVLAdaptiveModulationAlgorithm	1.3.6.1.4.1.12394.1.1.10.9.10	INTEGER	read-write	Applicable to all units with HW version C or higher. Defines the adaptive modulation algorithm used by the unit.
INT brzaccVLAdaptiveModulationAlgorithmOption	1.3.6.1.4.1.12394.1.1.10.9.1	INTEGER	read-write	Applicable to all units. Enables/disables the adaptive modulation level decision mechanism.
INT brzaccVLAdaptiveModulationDecisionThresholds	1.3.6.1.4.1.12394.1.1.10.9.5	INTEGER	read-write	Applicable to all units. Defines the setting of thresholds for the rate decision algorithm. high (2) should typically be used when the SNR is lower than 13dB.
INT brzaccVLAdaptiveModulationHistorySize	1.3.6.1.4.1.12394.1.1.10.9.7	INTEGER	read-write	Applicable to all units with HW version C or higher. This value is used to compute the transmission time. Not used in version 6.0 and higher.
INT brzaccVLAdaptiveModulationPacketNoOnUpperRate	1.3.6.1.4.1.12394.1.1.10.9.9	INTEGER	read-write	Applicable to all units with HW version C or higher. The number of frames used on upper modulations.
INT brzaccVLAdaptiveModulationPacketThresholdToTestUpRate	1.3.6.1.4.1.12394.1.1.10.9.8	INTEGER	read-write	Applicable to all units with HW version C or higher. When the number of transmitted frames exceeds this number the upper modulations will be tested.
brzaccVLAdaptiveModulationParams	1.3.6.1.4.1.12394.1.1.10.9
INT brzaccVLAdaptiveModulationRetriesOnLowerModulations	1.3.6.1.4.1.12394.1.1.10.9.11	INTEGER	read-write	Applicable to all units with HW version C or higher. It allows retransmissions at lower modulation levels.
INT brzaccVLAdaptiveModulationRTSDurationMode	1.3.6.1.4.1.12394.1.1.10.9.12	INTEGER	read-write	Applicable to all units with HW version C or higher. It defines the mode to calculate the value for RTS duration field.
INT brzaccVLAdbAdapModOption	1.3.6.1.4.1.12394.1.1.11.5.1.2.1.36	INTEGER	read-only	Applicable to AU/BU Only. The SU/RB adaptive modulation option configuration. It is not applicable for SU-EZ.
INT brzaccVLAdbAge	1.3.6.1.4.1.12394.1.1.11.5.1.2.1.44	INTEGER	read-only	Applicable to AU/BU only. The time since any packet was received from the relevant SU/RB.
INT brzaccVLAdbAtpcOption	1.3.6.1.4.1.12394.1.1.11.5.1.2.1.35	INTEGER	read-only	Applicable to AU/BU Only. The SU/RB ATPC option configuration.
INT brzaccVLAdbAuthOption	1.3.6.1.4.1.12394.1.1.11.5.1.2.1.42	INTEGER	read-only	Applicable to AU/BU Only. The SU/RB authentication algorithm configuration. Not available for SU-EZ.
STR brzaccVLAdbBootVer	1.3.6.1.4.1.12394.1.1.11.5.1.2.1.34	DisplayString	read-only	Applicable to AU/BU Only. The SU/RB Boot Version. Not available for SU-EZ.
INT brzaccVLAdbBurstModeOption	1.3.6.1.4.1.12394.1.1.11.5.1.2.1.37	INTEGER	read-only	Applicable to AU/BU Only. The SU/RB burst mode option configuration. It is not applicable for SU-EZ.
INT brzaccVLAdbCirMaxDelay	1.3.6.1.4.1.12394.1.1.11.5.1.2.1.29	INTEGER	read-only	Applicable to AU Only. Not applicable to BreezeNET-B products. The value configured in the relevant SU for the CIR Maximum Delay parameter. It returns maximum value on 32 bits for SU-EZ with SW version 1.00.15 and this means NA (Not Available).
INT brzaccVLAdbCirRx	1.3.6.1.4.1.12394.1.1.11.5.1.2.1.27	INTEGER	read-only	Applicable to AU Only. Not applicable to BreezeNET-B products. This parameter is not relevant for SU-EZ with SW version 1.00.15 and it is 0. The value configured in the relevant SU for the CIR: AU to SU parameter.
INT brzaccVLAdbCirTx	1.3.6.1.4.1.12394.1.1.11.5.1.2.1.25	INTEGER	read-only	Applicable to AU Only. Not applicable to BreezeNET-B products. This parameter is not relevant for SU-EZ with SW 1.00.15 and it is 0. The value configured in the relevant SU for the CIR: SU to AU parameter.
INT brzaccVLAdbConcatenationOption	1.3.6.1.4.1.12394.1.1.11.5.1.2.1.39	INTEGER	read-only	Applicable to AU/BU Only. The SU/RB concatenation option configuration. It is not applicable for SU-EZ.
INT brzaccVLAdbCountryCode	1.3.6.1.4.1.12394.1.1.11.5.1.2.1.33	INTEGER	read-only	Applicable to AU/BU Only. The SU/RB country code. 9999 means unavailable country code.
STR brzaccVLAdbCpldVer	1.3.6.1.4.1.12394.1.1.11.5.1.2.1.32	DisplayString	read-only	Applicable to AU/BU Only. The SU/RB CPLD Version. Not available for SU-EZ.
INT brzaccVLAdbDataEncyptOption	1.3.6.1.4.1.12394.1.1.11.5.1.2.1.43	INTEGER	read-only	Applicable to AU/BU Only. The SU/RB data encryption option configuration. Not available for SU-EZ.
INT brzaccVLAdbDistance	1.3.6.1.4.1.12394.1.1.11.5.1.2.1.30	INTEGER	read-only	Applicable to AU/BU Only. The distance between the SU/RB and the AU/BU (In Kilometers). It is not applicable for SU-EZ and it returns 0.
C32 brzaccVLAdbDroppedFramesTotal	1.3.6.1.4.1.12394.1.1.11.5.1.2.1.8	Counter32	read-only	Applicable to AU/BU only. Counts the total number of frames intended to the SU/RB that were dropped because they were retransmitted to the extent of the maximum allowed number of retransmissions without being acknowledged.
INT brzaccVLAdbHwRevision	1.3.6.1.4.1.12394.1.1.11.5.1.2.1.31	INTEGER	read-only	Applicable to AU/BU Only. The SU/RB HW Revision. Not available for SU-EZ.
INT brzaccVLAdbIndex	1.3.6.1.4.1.12394.1.1.11.5.1.2.1.1	INTEGER	read-only	Applicable to AU/BU only. The index of an entry in the AU/BU MAC Address Database table.
IP brzaccVLAdbIpAddress	1.3.6.1.4.1.12394.1.1.11.5.1.2.1.47	IpAddress	read-only	Applicable to AU/BU only with SW version 5.2.11 and higher. The Running IP address of the relevant SU/RB. Not available for SU-EZ with SW version lower than 1.1.1
MAC brzaccVLAdbMacAddress	1.3.6.1.4.1.12394.1.1.11.5.1.2.1.2	MacAddress	read-only	Applicable to AU/BU only. The MAC Address of an SU/RB entry in the MAC Address Database table.
INT brzaccVLAdbMaxModulationLevel	1.3.6.1.4.1.12394.1.1.11.5.1.2.1.6	INTEGER	read-only	Applicable to AU/BU only. The value configured in the relevant SU/RB for the Maximum Modulation Level parameter. Modulation Level 8 is not applicable for units with HW revision A. It is not applicable for SU-EZ and it returns na.
INT brzaccVLAdbMirRx	1.3.6.1.4.1.12394.1.1.11.5.1.2.1.28	INTEGER	read-only	Applicable to AU/BU only. This parameter is not relevant for SU-EZ with SW version 1.00.15 and it is 0. The value configured in the relevant SU/RB for the MIR: AU/BU to SU/RB parameter.
INT brzaccVLAdbMirTx	1.3.6.1.4.1.12394.1.1.11.5.1.2.1.26	INTEGER	read-only	Applicable to AU/BU only. The value configured in the relevant SU/RB for the MIR: SU/RB to AU/BU parameter. For SU-EZ SW version 1.00.15, it represents the value set in AU-EZ.
INT brzaccVLAdbRSSI	1.3.6.1.4.1.12394.1.1.11.5.1.2.1.46	INTEGER	read-only	Applicable to AU/BU only with SW version 5.1 and higher. The average Received Signal Strength Indication of frames received by the AU/BU from the relevant SU/RB. This value is given in dBm units.
INT brzaccVLAdbSecurityMode	1.3.6.1.4.1.12394.1.1.11.5.1.2.1.41	INTEGER	read-only	Applicable to AU/BU Only. The SU/RB security mode configuration. Not available for SU-EZ.
INT brzaccVLAdbSNR	1.3.6.1.4.1.12394.1.1.11.5.1.2.1.5	INTEGER	read-only	Applicable to AU/BU only. The average Signal to Noise Ratio in dB of frames received by the AU/BU from the relevant SU/RB.
INT brzaccVLAdbStatus	1.3.6.1.4.1.12394.1.1.11.5.1.2.1.3	INTEGER	read-only	Applicable to AU/BU only. The status of the relevant SU/RB.
STR brzaccVLAdbSwVersion	1.3.6.1.4.1.12394.1.1.11.5.1.2.1.4	DisplayString	read-only	Applicable to AU/BU only. The SW version of the relevant SU/RB. Not available for SU-EZ.
C32 brzaccVLAdbTxFailedModLevel1	1.3.6.1.4.1.12394.1.1.11.5.1.2.1.17	Counter32	read-only	Applicable to AU/BU only. Counts the total number of failures to successfully transmit unicast frames intended to the SU/RB using modulation level 1.
C32 brzaccVLAdbTxFailedModLevel2	1.3.6.1.4.1.12394.1.1.11.5.1.2.1.18	Counter32	read-only	Applicable to AU/BU only. Counts the total number of failures to successfully transmit unicast frames intended to the SU/RB using modulation level 2.
C32 brzaccVLAdbTxFailedModLevel3	1.3.6.1.4.1.12394.1.1.11.5.1.2.1.19	Counter32	read-only	Applicable to AU/BU only. Counts the total number of failures to successfully transmit unicast frames intended to the SU/RB using modulation level 3.
C32 brzaccVLAdbTxFailedModLevel4	1.3.6.1.4.1.12394.1.1.11.5.1.2.1.20	Counter32	read-only	Applicable to AU/BU only. Counts the total number of failures to successfully transmit unicast frames intended to the SU/RB using modulation level 4.
C32 brzaccVLAdbTxFailedModLevel5	1.3.6.1.4.1.12394.1.1.11.5.1.2.1.21	Counter32	read-only	Applicable to AU/BU only. Counts the total number of failures to successfully transmit unicast frames intended to the SU/RB using modulation level 5.
C32 brzaccVLAdbTxFailedModLevel6	1.3.6.1.4.1.12394.1.1.11.5.1.2.1.22	Counter32	read-only	Applicable to AU/BU only. Counts the total number of failures to successfully transmit unicast frames intended to the SU/RB using modulation level 6.
C32 brzaccVLAdbTxFailedModLevel7	1.3.6.1.4.1.12394.1.1.11.5.1.2.1.23	Counter32	read-only	Applicable to AU/BU only. Counts the total number of failures to successfully transmit unicast frames intended to the SU/RB using modulation level 7.
C32 brzaccVLAdbTxFailedModLevel8	1.3.6.1.4.1.12394.1.1.11.5.1.2.1.24	Counter32	read-only	Applicable to AU/BU only. Counts the total number of failures to successfully transmit unicast frames intended to the SU/RB using modulation level 8. Not applicable for units with HW revision A.
C32 brzaccVLAdbTxFramesTotal	1.3.6.1.4.1.12394.1.1.11.5.1.2.1.7	Counter32	read-only	Applicable to AU/BU only. Counts the total number of unicast frames (excluding retransmissions) that were successfully transmitted to the SU/RB over the wireless link.
C32 brzaccVLAdbTxSuccessModLevel1	1.3.6.1.4.1.12394.1.1.11.5.1.2.1.9	Counter32	read-only	Applicable to AU/BU only. Counts the total number of unicast frames (excluding retransmissions) that were successfully transmitted to the SU/RB over the wireless link using modulation level 1.
C32 brzaccVLAdbTxSuccessModLevel2	1.3.6.1.4.1.12394.1.1.11.5.1.2.1.10	Counter32	read-only	Applicable to AU/BU only. Counts the total number of unicast frames (excluding retransmissions) that were successfully transmitted to the SU/RB over the wireless link using modulation level 2.
C32 brzaccVLAdbTxSuccessModLevel3	1.3.6.1.4.1.12394.1.1.11.5.1.2.1.11	Counter32	read-only	Applicable to AU/BU only. Counts the total number of unicast frames (excluding retransmissions) that were successfully transmitted to the SU/BU over the wireless link using modulation level 3.
C32 brzaccVLAdbTxSuccessModLevel4	1.3.6.1.4.1.12394.1.1.11.5.1.2.1.12	Counter32	read-only	Applicable to AU/BU only. Counts the total number of unicast frames (excluding retransmissions) that were successfully transmitted to the SU/RB over the wireless link using modulation level 4.
C32 brzaccVLAdbTxSuccessModLevel5	1.3.6.1.4.1.12394.1.1.11.5.1.2.1.13	Counter32	read-only	Applicable to AU/BU only. Counts the total number of unicast frames (excluding retransmissions) that were successfully transmitted to the SU/RB over the wireless link using modulation level 5.
C32 brzaccVLAdbTxSuccessModLevel6	1.3.6.1.4.1.12394.1.1.11.5.1.2.1.14	Counter32	read-only	Applicable to AU/BU only. Counts the total number of unicast frames (excluding retransmissions) that were successfully transmitted to the SU/BU over the wireless link using modulation level 6.
C32 brzaccVLAdbTxSuccessModLevel7	1.3.6.1.4.1.12394.1.1.11.5.1.2.1.15	Counter32	read-only	Applicable to AU/BU only. Counts the total number of unicast frames (excluding retransmissions) that were successfully transmitted to the SU/RB over the wireless link using modulation level 7.
C32 brzaccVLAdbTxSuccessModLevel8	1.3.6.1.4.1.12394.1.1.11.5.1.2.1.16	Counter32	read-only	Applicable to AU/BU only. Counts the total number of unicast frames (excluding retransmissions) that were successfully transmitted to the SU/RB over the wireless link using modulation level 8. Not applicable for units with HW revision A.
STR brzaccVLAdbUnitName	1.3.6.1.4.1.12394.1.1.11.5.1.2.1.45	DisplayString	read-only	Applicable to AU/BU only. The unit name of the relevant SU/RB. Not available for SU-EZ.
IP brzaccVLAdbWi2IPaddress	1.3.6.1.4.1.12394.1.1.11.5.1.3.1.22	IpAddress	read-only	Applicable to AU/BU only with SW version 5.0 and higher. The IP address of the Wi2 Access Point. Not available for SU-EZ.
STR brzaccVLAdminPassword	1.3.6.1.4.1.12394.1.1.2.8.3	DisplayString	read-write	Applicable to all units. The Administrator password. Value read will allwais be *********. Up to 8 printable ASCII characters.
INT brzaccVLAESEncryptionSupport	1.3.6.1.4.1.12394.1.1.1.18.5	INTEGER	read-only	Applicable to all units. The supported AES Encryption Option.
INT brzaccVLAggregateCIRDownlink	1.3.6.1.4.1.12394.1.1.11.5.1.4.4	INTEGER	read-only	Applicable to AU only with SW version 6.0 and higher. Aggregate CIR downlink.
INT brzaccVLAggregateCIRUplink	1.3.6.1.4.1.12394.1.1.11.5.1.4.3	INTEGER	read-only	Applicable to AU only with SW version 6.0 and higher. Aggregate CIR uplink.
brzaccVLAggregateMIRCIR	1.3.6.1.4.1.12394.1.1.11.5.1.4
INT brzaccVLAggregateMIRDownlink	1.3.6.1.4.1.12394.1.1.11.5.1.4.2	INTEGER	read-only	Applicable to AU only with SW version 6.0 and higher. Aggregate MIR downlink.
INT brzaccVLAggregateMIRUplink	1.3.6.1.4.1.12394.1.1.11.5.1.4.1	INTEGER	read-only	Applicable to AU only with SW version 6.0 and higher. Aggregate MIR uplink.
INT brzaccVLAIFS	1.3.6.1.4.1.12394.1.1.6.3	INTEGER	read-write	Applicable to AU and SU. Not applicable to BreezeNET-B products. Not applicable if Wireless Link Prioritization is enabled. Arbitration Inter-Frame Spacing (AIFS) value, in slots. This is the number of time slots that define the DIFS. (DIFS=SIFS+AIFS). A value of 1 should be used only in point-to-point applications to allow one unit to have advantage over the other unit.
brzaccVLAirInterface	1.3.6.1.4.1.12394.1.1.6
INT brzaccVLAllowedBandwidth	1.3.6.1.4.1.12394.1.1.1.18.2.1.3	INTEGER	read-only	Applicable to all units. The bandwidth when using the applicable the sub-band.
STR brzaccVLAntennaGain	1.3.6.1.4.1.12394.1.1.6.17	DisplayString	read-write	Applicable to all units. Read-write in units where brzaccVLAntennaGainChange is supported. Read-only in units where brzaccVLAntennaGainChange is not supported. The net gain (including cable attenuation for detached antennas) of the antenna. Range: 0 - to Maximum EIRP defined by country code + 10 (dBi). A value of -2 (this value is configurable only in factory) means don't care. A value of -1 (this value is configurable only in factory) means that the unit will not transmit until the actual value is configured.
INT brzaccVLAntennaGainChange	1.3.6.1.4.1.12394.1.1.1.19	INTEGER	read-only	Applicable to all units. Indicates whether the Antenna Gain parameter is changeable or fixed.
INT brzaccVLApplicableModulationLevel	1.3.6.1.4.1.12394.1.1.6.5.1.2	INTEGER	read-only	Applicable to all units. The applicable modulation level for an entry in the Transmit Power Table. Level 8 is not applicable to units with HW revision A.
INT brzaccVLApWorkingMode	1.3.6.1.4.1.12394.1.1.2.16	INTEGER	read-only	Applicable to AU-EZ only. Starting with 5.5 it is read-only. Report unit running mode: 1 - EZ mode.
INT brzaccVLARPBroadcastOverrideFilter	1.3.6.1.4.1.12394.1.1.5.7.3	INTEGER	read-write	Applicable to SU/RB only. Enables or disables the broadcasting of ARP messages, overriding the general *brzaccVLEthBroadcastFiltering Ethernet broadcast filtering option.
MAC brzaccVLAssociatedAU	1.3.6.1.4.1.12394.1.1.1.10	MacAddress	read-only	Applicable to SU/RB only. Associated AU/BU MAC address.
INT brzaccVLAteTestResults	1.3.6.1.4.1.12394.1.1.1.20	INTEGER	read-only	Applicable to all units. Results of ATE Test
brzaccVLATPC	1.3.6.1.4.1.12394.1.1.6.13
INT brzaccVLAtpcOption	1.3.6.1.4.1.12394.1.1.6.13.1	INTEGER	read-write	Applicable all units. Enabling/disabling the ATPC Algorithm.
INT brzaccVLAtpcOptionEZ	1.3.6.1.4.1.12394.1.1.6.13.7	INTEGER	read-write	Applicable AU only. Enabling/disabling the ATPC Algorithm for EZ.
brzaccVLAUAdbEntry	1.3.6.1.4.1.12394.1.1.11.5.1.2.1		not-accessible	Applicable to AU/BU only. An entry in the AU/BU MAC Address Database table.
INT brzaccVLAUAdbResetAllModulationLevelCounters	1.3.6.1.4.1.12394.1.1.11.5.1.1	INTEGER	read-write	Applicable to AU/BU only. To reset all the counters for all SUs/RB in the MAC Address Database.
brzaccVLAUAdbTable	1.3.6.1.4.1.12394.1.1.11.5.1.2		not-accessible	Applicable to AU/BU only. AU/BU MAC Address Database table.
NTF brzaccVLAUagingTRAP	1.3.6.1.4.1.12394.4.1.3.4			An AU/BU trap indicating that the unit association was aged out and removed from the Association database following its failure to acknowledge a specified number of consecutive frames.
C32 brzaccVLAUBeaconsToWireless	1.3.6.1.4.1.12394.1.1.11.2.3.1.1	Counter32	read-only	Applicable to AU/BU only. The number of beacons transmitted to the wireless media.
INT brzaccVLAUBurstDurationHighPriority	1.3.6.1.4.1.12394.1.1.7.10.4.5	INTEGER	read-write	Applicable only to AU with a license for the Wireless Link Prioritization feature and to BU-100. Applicable only if the Wireless Link Prioritization Option is enabled. Defines the Maximum duration of burst that can be done by AU with High Priority packets. The time is given in 250 microseconds units
INT brzaccVLAUBurstDurationLowPriority	1.3.6.1.4.1.12394.1.1.7.10.4.6	INTEGER	read-write	Applicable only to AU with a license for the Wireless Link Prioritization feature and to BU-100. Applicable only if the Wireless Link Prioritization Option is enabled. Defines the Maximum duration of burst that can be done by AU with Low Priority packets. The time is given in 250 microseconds units
INT brzaccVLAUDefaultMulticastKeyID	1.3.6.1.4.1.12394.1.1.9.4	INTEGER	read-write	Applicable to AU/BU only. The key to be used for encryption of multicasts and broadcasts.
INT brzaccVLAUDefinedFrequency	1.3.6.1.4.1.12394.1.1.6.12.8	INTEGER	read-write	Applicable to AU/BU with HW revision B and lower (for units with HW revision C and higher replaced by brzaccVLAUDefinedFrequencyNew to support a resolution of 0.5 MHz). For 5.8GHz products with SW version below 2.0 this is the frequency in MHz of the AU/BU after the next reset. For units with SW version 2.0 and up this is the frequency in MHz to use when the DFS Option is disabled. For 5.8GHz products with SW version below 2.0 the range is 5740 to 5830 MHz using 10MHz resolution. For units with SW version 2.0 and up the range is as defined in the selected Sub Band.
STR brzaccVLAUDefinedFrequencyNew	1.3.6.1.4.1.12394.1.1.6.12.14	DisplayString	read-write	Applicable to AU/BU. For 5.8GHz products with SW version below 2.0 this is the frequency in MHz of the AU/BU after the next reset. For units with SW version 2.0 and up this is the frequency in MHz to use when the DFS Option is disabled. (Replaces brzaccVLAUDefinedFrequency to support a resolution of 0.5 MHz for units with HW revision C and higher). For 5.8GHz products with SW version below 2.0 the range is 5740 to 5830 MHz using 10MHz resolution. For units with SW version 2.0 and up the range is as defined in the selected Sub Band.
NTF brzaccVLAUdisassociatedTRAP	1.3.6.1.4.1.12394.4.1.3.3			An AU/BU trap indicating that an SU/RB has been disassociated from the AU/BU.
INT brzaccVLAUHiddenESSIDOption	1.3.6.1.4.1.12394.1.1.6.1.5.1	INTEGER	read-write	Applicable to AU/BU only. Enabling/disabling the use of the Hidden ESSID.
brzaccVLAUMacAddressDatabase	1.3.6.1.4.1.12394.1.1.11.5.1
brzaccVLAUNewAdbEntry	1.3.6.1.4.1.12394.1.1.11.5.1.3.1		not-accessible	Applicable to AU/BU only with SW version 5.0 and higher. An entry in the AU/BU MAC Address New Database table.
brzaccVLAUNewAdbTable	1.3.6.1.4.1.12394.1.1.11.5.1.3		not-accessible	Applicable to AU/BU only with SW version 5.0 and higher. AU/BU MAC Address New Database table idexed by MAC Address
INT brzaccVLAUSSupportSU54	1.3.6.1.4.1.12394.1.1.1.22	INTEGER	read-only	Applicable to AU only. If the AU is not AUS, it will return 255. If the AUS is in 900 MHz bandwidth, it will return 255 Indicates if the AUS has license for association of SU-54.
INT brzaccVLAUSSupportSU8	1.3.6.1.4.1.12394.1.1.1.24	INTEGER	read-only	Applicable to AU only. If the AU is not AUS, it will return 255. If the unit is AUS but not operating in 900 MHz, it will return 255. Indicates if the AUS has license for association of SU-8.
NTF brzaccVLAUSUnsupportedSubscriberTypeTRAP	1.3.6.1.4.1.12394.4.1.3.110			Applicable to AUS only. This trap is generated when a subscriber with unsupported type tries to associate to AUS. The AUS supports only SU-3, SU-6, SU-V. If licensed, SU-54 is supported too. For 900 MHz band, AUS supports only SU-3. If licensed, SU-8 is supported too. The first variable of the trap is the subscriber MAC Address. The second variable is the type of subscriber
INT brzaccVLAuthenticationAlgorithm	1.3.6.1.4.1.12394.1.1.9.1	INTEGER	read-write	Applicable to all units. Enables/disables the authentication encryption option. openSystem: Authentication messages are not encrypted. sharedKey : Authentication messages are encrypted
INT brzaccVLAuthenticationEncryptionSupport	1.3.6.1.4.1.12394.1.1.1.18.3	INTEGER	read-only	Applicable to all units. The supported Authentication Encryption Option.
INT brzaccVLAuthenticationPromiscuousMode	1.3.6.1.4.1.12394.1.1.9.6	INTEGER	read-write	Applicable to AU/BU only. Enables/disable the promiscuous mode allowing authentication of and communication with all SUs/RB regardless of their security parameters.
INT brzaccVLAutomaticChannelSelection	1.3.6.1.4.1.12394.1.1.6.18.3	INTEGER	read-write	Applicable to AU/BU only. Defines weather the AU/BU shall choose the most noise free channel upon startup after spectrum analysis.
INT brzaccVLAutoSubBandFrequencySubsetActive	1.3.6.1.4.1.12394.1.1.6.12.15.2.1.3	INTEGER	read-write	Applicable to SU/RB with SW version 4.0 and higher. The status of an entry in the Auto Sub Band Frequency subset Table. The frequency of an active entry will be included in the final list of frequencies to be used for scanning.
INT brzaccVLAutoSubBandFrequencySubsetBandIdx	1.3.6.1.4.1.12394.1.1.6.12.15.2.1.1	INTEGER	read-only	Applicable to SU/RB with SW version 4.0 and higher. The index of the applicable Sub Band. This is the Sub Band ID of the relevant entry in the Country Dependent Parameters table. Serves also as an index of the entry in the Frequency subset Table.
INT brzaccVLAutoSubBandFrequencySubsetBandwidth	1.3.6.1.4.1.12394.1.1.6.12.15.2.1.5	INTEGER	read-only	Applicable to SU/RB with SW version 4.0 and higher. The bandwidth in MHz of the entry in the Auto Sub Band Frequency Subset table.
INT brzaccVLAutoSubBandFrequencySubsetDFSStatus	1.3.6.1.4.1.12394.1.1.6.12.15.2.1.6	INTEGER	read-only	Applicable to SU/RB with SW version 4.0 and higher. The channel status of the entry in the Auto Sub Band Frequency Subset table.
brzaccVLAutoSubBandFrequencySubsetEntry	1.3.6.1.4.1.12394.1.1.6.12.15.2.1		not-accessible	Applicable to SU/RB with SW version 4.0 and higher. An entry in the Frequency Subset Table.
STR brzaccVLAutoSubBandFrequencySubsetFrequency	1.3.6.1.4.1.12394.1.1.6.12.15.2.1.4	DisplayString	read-only	Applicable to SU/RB with SW version 4.0 and higher. The frequency in MHz of the entry in the Auto Sub Band Frequency Subset table.
INT brzaccVLAutoSubBandFrequencySubsetFrequencyIdx	1.3.6.1.4.1.12394.1.1.6.12.15.2.1.2	INTEGER	read-only	Applicable to SU/RB with SW version 4.0 and higher. The index of the applicable frequency in the applicable Sub Band. Serves also as an index of the entry in the Frequency subset Table.
brzaccVLAutoSubBandFrequencySubsetTable	1.3.6.1.4.1.12394.1.1.6.12.15.2		not-accessible	Applicable to SU/RB with SW version 4.0 and higher. The Frequency Subset Table that includes all available sub-bands and all the frequencies in these sub-bands.
brzaccVLAutoSubBandSelect	1.3.6.1.4.1.12394.1.1.6.12.15
INT brzaccVLAutoSubBandSelectedFreqSubset	1.3.6.1.4.1.12394.1.1.6.12.15.1	INTEGER	read-write	Applicable to SU/RB with SW version 4.0 and higher. Apply the selected subset. After the next reset the new subset will be used for scanning.
NTF brzaccVLAUwirelessQualityTRAP	1.3.6.1.4.1.12394.4.1.3.20			An AU/BU trap, indicating that the quality of the wireless link (retransmissions rate) has changed and dropped below (Off) or increased above (On) a threshold , defined by the *brzaccVLWirelessTrapThreshold. The threshold for AU/BU is a percentage of retransmissions.
INT brzaccVLAverageModulationLevel	1.3.6.1.4.1.12394.1.1.11.2.5.3	INTEGER	read-only	Applicable to SU/RB. The average modulation level for successful transmission (rounded to nearest integer) since last reset of the Per Modulation Level counters. Range: 1 to 8.
INT brzaccVLAverageReceiveRSSI	1.3.6.1.4.1.12394.1.1.11.10	INTEGER	read-only	Applicable to SU/RB only. The average Received Signal Strength Indication of frames. This value is given in dBm units.
INT brzaccVLAverageReceiveSNR	1.3.6.1.4.1.12394.1.1.11.1	INTEGER	read-only	Applicable to SU/RB only. The average Signal to Noise Ratio of received frames.
INT brzaccVLAverageSignalInterferenceRatio	1.3.6.1.4.1.12394.1.1.11.12	INTEGER	read-only	Applicable to all units. The current Average Signal Interference Ratio of the unit.
STR brzaccVLAvgSNRMemoryFactor	1.3.6.1.4.1.12394.1.1.10.7	DisplayString	read-write	Applicable to all units. The weight of history in average SNR calculation. The higher is the value, the higher is the weight of history. Range: -1 (Disregard History) to 32.
INT brzaccVLBeaconPeriod	1.3.6.1.4.1.12394.1.1.6.32	INTEGER	read-write	Applicable only to AU VL. Range: 16-160 miliseconds.
brzaccVLBestAu	1.3.6.1.4.1.12394.1.1.6.11
INT brzaccVLBestAuNoOfScanningAttempts	1.3.6.1.4.1.12394.1.1.6.11.2	INTEGER	read-write	Applicable to SU/RB only. The number of scanning attempts to collect information for the Best AU/BU decision. Range: 1 to 255.
INT brzaccVLBestAuSupport	1.3.6.1.4.1.12394.1.1.6.11.1	INTEGER	read-write	Applicable to SU/RB only. Disable/enable the Best AU/BU selection mechanism.
INT brzaccVLBridgeAgingTime	1.3.6.1.4.1.12394.1.1.5.2	INTEGER	read-write	Applicable to all units. Bridge aging time for devices on both the Ethernet and wireless link sides. Range: 20 to 2000 seconds.
brzaccVLBridgeParameters	1.3.6.1.4.1.12394.1.1.5
INT brzaccVLBroadcastRelaying	1.3.6.1.4.1.12394.1.1.5.4	INTEGER	read-write	Applicable to AU only. Not applicable to BreezeNET-B products. Enables/disables the relaying of broadcast messages to the wireless link.
INT brzaccVLBurstInterval	1.3.6.1.4.1.12394.1.1.10.10.2	INTEGER	read-write	Applicable to all units. Not applicable if Wireless Link Prioritization is enabled. Burst mode interval in milliseconds. Range: 1 to the maximum value as defined in the country specific parameters of the Sub Band (milliseconds).
brzaccVLBurstMode	1.3.6.1.4.1.12394.1.1.10.10
INT brzaccVLBurstModeOption	1.3.6.1.4.1.12394.1.1.10.10.1	INTEGER	read-write	Applicable to all units. Applicable only if Burst Mode Option is supported by country specific parameters of the Sub Band. Not applicable if Wireless Link Prioritization is enabled. Enables/disable burst mode operation. In SU/RB with HW Revision B or lower blocked(3) value is returned when Security Mode is Wep , Data Encryption Option is Enabled and Burst option is Enabled. In AU/BU with HW Revision B or lower blocked(3) value is returned when Dfs Option is Enabled and Burst mode is enabled.
INT brzaccVLBurstModeSupport	1.3.6.1.4.1.12394.1.1.1.18.2.1.8	INTEGER	read-only	Applicable to all units. The supported Burst Mode Option.
INT brzaccVLCCAESEncryptionSupport	1.3.6.1.4.1.12394.1.1.6.25.2.1.5	INTEGER	read-only	Applicable to all units.
INT brzaccVLCCAllowedBandwidth	1.3.6.1.4.1.12394.1.1.6.25.3.1.4	INTEGER	read-only	Applicable to all units. The bandwidth when using the applicable the sub-band.
INT brzaccVLCCAuthenticationEncryptionSupport	1.3.6.1.4.1.12394.1.1.6.25.2.1.3	INTEGER	read-only	Applicable to all units.
INT brzaccVLCCBurstModeSupport	1.3.6.1.4.1.12394.1.1.6.25.3.1.9	INTEGER	read-only	Applicable to all units. The supported Burst Mode Option.
INT brzaccVLCCDataEncryptionSupport	1.3.6.1.4.1.12394.1.1.6.25.2.1.4	INTEGER	read-only	Applicable to all units.
INT brzaccVLCCDfsSupport	1.3.6.1.4.1.12394.1.1.6.25.3.1.11	INTEGER	read-only	Applicable to AU/BU only. The supported Dfs Option.
INT brzaccVLCCMaximumBurstDuration	1.3.6.1.4.1.12394.1.1.6.25.3.1.10	INTEGER	read-only	Applicable to all units. Applicable only if Burst Mode Option is supported. The maximum supported burst duration.
INT brzaccVLCCMaxModulationLevel	1.3.6.1.4.1.12394.1.1.6.25.3.1.8	INTEGER	read-only	Applicable to all units. The maximum supported modulation level.
INT brzaccVLCCMinimumHwRevision	1.3.6.1.4.1.12394.1.1.6.25.3.1.12	INTEGER	read-only	Applicable to all units. The Minimum HW Revision needed to support the country code.
INT brzaccVLCCMinModulationLevel	1.3.6.1.4.1.12394.1.1.6.25.3.1.7	INTEGER	read-only	Applicable to all units. The minimum supported modulation level.
STR brzaccVLCCName	1.3.6.1.4.1.12394.1.1.6.25.2.1.2	DisplayString	read-only	Applicable to all units.
INT brzaccVLCCNumber	1.3.6.1.4.1.12394.1.1.6.25.2.1.1	INTEGER	read-only	Applicable to all units.
INT brzaccVLCCNumberIdx	1.3.6.1.4.1.12394.1.1.6.25.3.1.1	INTEGER	read-only	Applicable to all units.
brzaccVLCCParamsEntry	1.3.6.1.4.1.12394.1.1.6.25.3.1		not-accessible	Applicable to all units.
STR brzaccVLCCParamsFrequencies	1.3.6.1.4.1.12394.1.1.6.25.3.1.3	DisplayString	read-only	Applicable to all units. The frequencies included in the applicable sub-band entry.
INT brzaccVLCCParamsIndex	1.3.6.1.4.1.12394.1.1.6.25.3.1.2	INTEGER	read-only	Applicable to all units.
brzaccVLCCParamsTable	1.3.6.1.4.1.12394.1.1.6.25.3		not-accessible	Applicable to all units. A table of country dependent parameters.
INT brzaccVLCCRegulationMaxEIRP	1.3.6.1.4.1.12394.1.1.6.25.3.1.6	INTEGER	read-only	Applicable to all units. The maximum Tx EIRP when using the applicable sub-band. A Regulation Max EIRP of 0, means no limit.
INT brzaccVLCCRegulationMaxTxPowerAtAntennaPort	1.3.6.1.4.1.12394.1.1.6.25.3.1.5	INTEGER	read-only	Applicable to all units. The maximum allowed Tx power when using the applicable sub-band. A RegulationMaxTxPowerAtAntennaPort of 255, means no limit
INT brzaccVLCellDistanceMode	1.3.6.1.4.1.12394.1.1.6.15.1	INTEGER	read-write	Applicable AU/BU only. The selected mode of deciding on Cell Distance.
brzaccVLCellDistanceParameters	1.3.6.1.4.1.12394.1.1.6.15
INT brzaccVLChangeUnitType	1.3.6.1.4.1.12394.1.1.2.15	INTEGER	read-write	Applicable RB/BU only. Change the unit type between BU and RB.
INT brzaccVLCirDownlink	1.3.6.1.4.1.12394.1.1.7.4	INTEGER	read-write	Applicable to SU only. Not applicable to BreezeNET-B products. The Committed Information Rate (CIR) from AU to SU. CIR must be below brzaccVLMirDownlink value. Range for Set: 0 to 2,048 (Kbps) for SU-3 with SW version below 4.0, 0 to 3,072 (Kbps) for SU-3 with SW version 4.0 and higher, 0 to 3,968 (Kbps) for SU-6 with SW version less than 4.0, 0 to 6,016 (Kbps) for SU-6 with SW version greater than 4.0, 0 to 14,976 (Kbps) for SU-24, 0 to 45,056 (Kbps) for SU-BD and SU-54, 0 to 11,264 (Kbps) for SU-8, 0 to 6,016 (Kbps) for SU-I, 0 to 12,032 (Kbps) for SU-V, 0 to 4,992 (Kbps) for RB-10, 0 to 1,024 (Kbps) for SU-1-BD The actual value (Get) will be the entered value rounded to the nearest multiple of 128 (N*128). BreezeNET-B products will return 65535.
INT brzaccVLCirUplink	1.3.6.1.4.1.12394.1.1.7.5	INTEGER	read-write	Applicable to SU only. Not applicable to BreezeNET-B products. The Committed Information Rate (CIR) from SU to AU. CIR must be below brzaccVLMirUplink value. Range for Set: 0 to 2,048 (Kbps) for SU-3, 0 to 3,968 (Kbps) for SU-6 with SW version less than 4.0, 0 to 4,096 (Kbps) for SU-6 with SW version greater than 4.0, 0 to 14,976 (Kbps) for SU-24, 0 to 45,056 (Kbps) for SU-BD and SU-54, 0 to 11,264 (Kbps) for SU-8, 0 to 2,048 (Kbps) for SU-I, 0 to 8,064 (Kbps) for SU-V, 0 to 4,992 (Kbps) for RB-10, 0 to 896 (Kbps) for SU-1-BD The actual value (Get) will be the entered value rounded to the nearest multiple of 128 (N*128). BreezeNET-B products will return 65535.
INT brzaccVLConcatenationMaxFrameSize	1.3.6.1.4.1.12394.1.1.10.11.3	INTEGER	read-write	Applicable to all units. Defines the maximum size of a concatenated frame. Range: 256 to 2200 (bytes) for BreezeNET-B products BU/RB14 BU/RB28, or for AU/SU with HW revision A or B. 256 to 4032 (bytes) for AU/SU with HW Revision C or higher, BreezeNET-B products BU/RB100 and BreezeNET-B products BU/RB10.
INT brzaccVLConcatenationMaximumNumberOfFrames	1.3.6.1.4.1.12394.1.1.10.11.2	INTEGER	read-write	Applicable to all units with SW version 3.X . Not applicable for version 4.0 and higher. Defines the maximum numbers of frames that can be concatenated. Range:2 to 8 (frames).
INT brzaccVLConcatenationOption	1.3.6.1.4.1.12394.1.1.10.11.1	INTEGER	read-write	Applicable to all units. Defines the Concatenation option.
brzaccVLConcatenationParameters	1.3.6.1.4.1.12394.1.1.10.11
brzaccVLConfigurationFileLoading	1.3.6.1.4.1.12394.1.1.2.10.3
STR brzaccVLConfigurationFileName	1.3.6.1.4.1.12394.1.1.2.10.3.1	DisplayString	read-write	Applicable to all units. The name of the configuration file to be downloaded/uploaded.
INT brzaccVLControlModulationLevel	1.3.6.1.4.1.12394.1.1.10.13	INTEGER	read-write	Applicable to all units wits software version 6.0 and higher. The modulation level for control frames. basicRates(1) means the all control frames will be sent at basic rate and modulationLevel1(2) means the all control frames will be sent at modulation level 1
STR brzaccVLCountryCode	1.3.6.1.4.1.12394.1.1.1.18.1	DisplayString	read-only	Applicable to all units. The country code and country name or country group name that is supported by the unit.
brzaccVLCountryCodeEntry	1.3.6.1.4.1.12394.1.1.6.25.2.1		not-accessible	Applicable to all units.
INT brzaccVLCountryCodeLearningBySU	1.3.6.1.4.1.12394.1.1.6.12.12	INTEGER	read-write	Applicable to AU only. Starting with 4.0 it is not applicable for BA4900 and BreezeNET B. Defines whether the SUs learn the country code of the AU.
brzaccVLCountryCodeParameters	1.3.6.1.4.1.12394.1.1.6.25
INT brzaccVLCountryCodeReApply	1.3.6.1.4.1.12394.1.1.6.25.1	INTEGER	read-write	Applicable to all units. Re-apply country code parameters.
INT brzaccVLCountryCodeSelect	1.3.6.1.4.1.12394.1.1.6.25.4	INTEGER	read-write	Applicable to all units. Configure the Country Code WARNING: It is the responsibility of the wireless system operator to verify that use of the selected Country Code does not result in violation of the relevant local radio regulations! For more details refer to the Selecting Country Code document
brzaccVLCountryCodeTable	1.3.6.1.4.1.12394.1.1.6.25.2		not-accessible	Applicable to all units.
brzaccVLCountryDependentParameterEntry	1.3.6.1.4.1.12394.1.1.1.18.2.1		not-accessible	Applicable to all units. An entry in the Country Dependent Parameters table.
STR brzaccVLCountryDependentParameterFrequencies	1.3.6.1.4.1.12394.1.1.1.18.2.1.2	DisplayString	read-only	Applicable to all units. The frequencies included in the applicable sub-band entry.
brzaccVLCountryDependentParameters	1.3.6.1.4.1.12394.1.1.1.18
INT brzaccVLCountryDependentParameterTableIdx	1.3.6.1.4.1.12394.1.1.1.18.2.1.1	INTEGER	read-only	Applicable to all units. The sub-band ID of the entry in the Country Dependent Parameters table. Serves also as index for the table entry.
brzaccVLCountryDependentParamsTable	1.3.6.1.4.1.12394.1.1.1.18.2		not-accessible	Applicable to all units. A table of country dependent parameters.
C32 brzaccVLCRCErrors	1.3.6.1.4.1.12394.1.1.11.2.4.2.2	Counter32	read-only	Applicable to all units. The number of frames received from the wireless media containing CRC errors.
INT brzaccVLCurrentAUOperatingFrequency	1.3.6.1.4.1.12394.1.1.6.12.7	INTEGER	read-only	Applicable to AU/BU with HW revision B and lower (for units with HW revision C and higher replaced by brzaccVLCurrentUOperatingFrequencyNew to support a resolution of 0.5 MHz). The operating frequency in MHz. For 5.8GHz products with SW version below 2.0 the range is 5740 to 5830 MHz using 10MHz resolution. For units with SW version 2.0 and up the range is as defined in the selected Sub Band.
STR brzaccVLCurrentAUOperatingFrequencyNew	1.3.6.1.4.1.12394.1.1.6.12.13	DisplayString	read-only	Applicable to AU/BU. The operating frequency in MHz. (Replaces brzaccVLCurrentAUOperatingFrequency to support a resolution of 0.5 MHz for units with HW revision C and higher). For 5.8GHz products with SW version below 2.0 the range is 5740 to 5830 MHz using 10MHz resolution. For units with SW version 2.0 and up the range is as defined in the selected Sub Band.
INT brzaccVLCurrentEthernetPortState	1.3.6.1.4.1.12394.1.1.1.16	INTEGER	read-only	Applicable to all units. The current Ethernet port state.
brzaccVLCurrentFrequencySubsetEntry	1.3.6.1.4.1.12394.1.1.6.12.6.1		not-accessible	Applicable to SU/RB and to AU/BU. An entry in the Current Frequency Subset Table.
INT brzaccVLCurrentFrequencySubsetFrequency	1.3.6.1.4.1.12394.1.1.6.12.6.1.2	INTEGER	read-only	Applicable to all units. Not applicable to SU/RB with SW version 4.0 and higher. Applicable to all units with HW revision B and lower (for units with HW revision C and higher replaced by brzaccVLCurrentFrequencySubsetFrequencyNew to support a resolution of 0.5 MHz). The frequency in MHz of an entry in the Current Frequency Subset table.
STR brzaccVLCurrentFrequencySubsetFrequencyNew	1.3.6.1.4.1.12394.1.1.6.12.6.1.3	DisplayString	read-only	Applicable to all units. Not applicable to SU/RB with SW version 4.0 and higher. The frequency in MHz of an entry in the Current Frequency Subset table. (Replaces brzaccVLCurrentFrequencySubsetFrequency to support a resolution of 0.5 MHz for units with HW revision C and higher).
brzaccVLCurrentFrequencySubsetTable	1.3.6.1.4.1.12394.1.1.6.12.6		not-accessible	Applicable to SU/RB and to AU/BU. Not applicable to SU/RB with SW version 4.0 and higher. The Current Frequency Subset table. In SU/RB it includes all frequencies that are currently used for scanning. In AU/BU it includes all frequencies that can be used by the DFS mechanism (if applicable)
INT brzaccVLCurrentFrequencySubsetTableIdx	1.3.6.1.4.1.12394.1.1.6.12.6.1.1	INTEGER	read-only	Applicable to SU/RB and to AU/BU. An index of an entry in the Current Frequency subset Table. Not applicable to SU/RB with SW version 4.0 and higher.
INT brzaccVLCurrentNoiseFloor	1.3.6.1.4.1.12394.1.1.11.11	INTEGER	read-only	Applicable to all units. The current Noise Floor of the unit.
INT brzaccVLCurrentNumOfAssociations	1.3.6.1.4.1.12394.1.1.1.13	INTEGER	read-only	Applicable to AU only. Not applicable to BreezeNET-B products. The number of SUs currently associated with the AU. BreezeNET-B products return 65535.
STR brzaccVLCurrentSUOperatingFrequency	1.3.6.1.4.1.12394.1.1.6.12.9	DisplayString	read-only	Applicable to SU/RB only. The frequency used currently by the unit. For 5.8GHz products with SW version below 2.0 the range is 5740 to 5830 MHz using 10MHz resolution. For units with SW version 2.0 and up the range is as defined in the selected Sub Band.
STR brzaccVLCurrentTxPower	1.3.6.1.4.1.12394.1.1.6.5.1.5	DisplayString	read-only	Applicable to SU/RB. The actual transmit power in dBm for the applicable rate. Range: -17 to the maximum value defined by brzaccVLMaximumTxPowerRange for the applicable modulation level.
C32 brzaccVLDataAndOtherMngFramesToWireless	1.3.6.1.4.1.12394.1.1.11.2.3.1.3	Counter32	read-only	Applicable to AU/BU only. The number of data and management frames transmitted to the wireless media. The count includes one count for each data frame transmitted successfully (excluding retransmissions).
INT brzaccVLDataEncryptionOption	1.3.6.1.4.1.12394.1.1.9.3	INTEGER	read-write	Applicable to all units. Enables/disables the data encryption option.
INT brzaccVLDataEncryptionSupport	1.3.6.1.4.1.12394.1.1.1.18.4	INTEGER	read-only	Applicable to all units. The supported Data Encryption Option.
brzaccVLDataFramesSubmittedToBridge	1.3.6.1.4.1.12394.1.1.11.2.3.5
IP brzaccVLDefaultGWAddress	1.3.6.1.4.1.12394.1.1.4.3	IpAddress	read-write	Applicable to all units. Default gateway IP address of the unit.
STR brzaccVLDefinedMaximumTxPowerRange	1.3.6.1.4.1.12394.1.1.6.6.1.3	DisplayString	read-only	Applicable to SU/RB only. The allowed range for the brzaccVLMaxTxPower parameter at the applicable modulation level . Range: -10 to the maximum allowed power level at the applicable modulation level , in dBm.
INT brzaccVLDeleteAllNwIpAddrs	1.3.6.1.4.1.12394.1.1.3.5	INTEGER	read-write	Applicable to all units. Deletes all entries from the Management IP Filter Table.
INT brzaccVLDeleteAllNwIpRanges	1.3.6.1.4.1.12394.1.1.3.12	INTEGER	read-write	Applicable to all units. Deletes all entries from the Management IP Ranges Table.
INT brzaccVLDeleteAllTrapAddrs	1.3.6.1.4.1.12394.1.1.3.9	INTEGER	read-write	Applicable to all units. Deletes all entries from the Management Trap Table.
INT brzaccVLDeleteAllUserFilters	1.3.6.1.4.1.12394.1.1.8.4	INTEGER	read-write	Applicable to SU, RB and AU. Not applicable to AU on 900 MHz. Deletes all entries from the IP Filter Table.
INT brzaccVLDeleteOneNwIpAddr	1.3.6.1.4.1.12394.1.1.3.4	INTEGER	read-write	Applicable to all units. 0 - cancel operation. 1..10 - Deletes a single selected entry from the Management IP Filter Table.
INT brzaccVLDeleteOneNwIpRange	1.3.6.1.4.1.12394.1.1.3.11	INTEGER	read-write	Applicable to all units. 0 - cancel operation. 1..10 - Deletes a single selected entry from the Management IP Ranges Table.
INT brzaccVLDeleteOneTrapAddr	1.3.6.1.4.1.12394.1.1.3.8	INTEGER	read-write	Applicable to all units. 0 - cancel operation. 1..10 - Deletes a single selected entry from the Management Trap Table.
INT brzaccVLDeleteOneUserFilter	1.3.6.1.4.1.12394.1.1.8.3	INTEGER	read-write	Applicable to SU/RB and AU-EZ only. Deletes a single selected entry from the IP Filter Table.
INT brzaccVLDeltaFromMinSNRLevel	1.3.6.1.4.1.12394.1.1.6.13.2	INTEGER	read-write	Applicable AU/BU only. The Minimum SNR Level plus the value of this parameter define the maximum desired level of the average SNR at the AU/BU. If the ATPC Option is enabled, than if the received SNR is above the maximum desired level, the AU/BU will transmit Power-Down messages to the applicable SU/RB. Range: 4 to 20 (dB).
INT brzaccVLDFSChannelAvoidancePeriod	1.3.6.1.4.1.12394.1.1.6.12.11.4	INTEGER	read-write	Applicable to AU/BU. Applicable to SU/RB with SW version 5.5.20 and higher. Defines the time after detecting radar signals in a channel of avoiding using the channel or adjacent channels in accordance with the bandwidth. Range: 1 to 60 (minutes).
INT brzaccVLDFSChannelCheckTime	1.3.6.1.4.1.12394.1.1.6.12.11.3	INTEGER	read-write	Applicable to AU/BU. Applicable to SU/RB with SW version 5.5.20 and higher. Channel Availability Check time defines the time the unit checks the channel for presence of radar signals and does not transmit after power up or association or after moving to a new channel due to detecting radar in the used channel. Range: 1 to 3600 (seconds).
INT brzaccVLDFSChannelFrequency	1.3.6.1.4.1.12394.1.1.6.12.11.7.1.2	INTEGER	read-only	Applicable to AU/BU with HW revision B and lower (for units with HW revision C and higher replaced by brzaccVLDFSChannelFrequency New to support a resolution of 0.5 MHz). The frequency in MHz of a channel in the DFS Radar Detection Channels Table.
STR brzaccVLDFSChannelFrequencyNew	1.3.6.1.4.1.12394.1.1.6.12.11.7.1.4	DisplayString	read-only	Applicable to AU/BU. The frequency of a channel in the DFS Radar Detection Channels Table. (Replaces brzaccVLDFSChannelFrequency to support a resolution of 0.5 MHz for units with HW revision C and higher).
INT brzaccVLDFSChannelIdx	1.3.6.1.4.1.12394.1.1.6.12.11.7.1.1	INTEGER	read-only	Applicable to AU/BU only. Read-only. The index of the entry in the brzaccVLDFSRadarDetectionChannelsTable.
INT brzaccVLDFSChannelRadarStatus	1.3.6.1.4.1.12394.1.1.6.12.11.7.1.3	INTEGER	read-only	Applicable to AU/BU only. The radar detection status of a channel in brzaccVLDFSRadarDetectionChannelTable.
INT brzaccVLDFSChannelReuseOption	1.3.6.1.4.1.12394.1.1.6.12.11.9.1	INTEGER	read-write	Applicable to AU/BU only. Enabling/disabling the DFS Channel Reuse Algorithm. Not applicable if DFS Option is not supported by the current Sub Band.
brzaccVLDFSChannelReuseParameters	1.3.6.1.4.1.12394.1.1.6.12.11.9
INT brzaccVLDFSClearRadarDetectedChannelsAfterReset	1.3.6.1.4.1.12394.1.1.6.12.11.6	INTEGER	read-write	Applicable to all units with SW version 5.5.20 and higher. Clear Radar Detected and Adjacent to Radar channels after unit reset. Returns the unit to operate in default frequency.
INT brzaccVLDFSDetectionAlgorithm	1.3.6.1.4.1.12394.1.1.6.12.11.10	INTEGER	read-write	Applicable to AU/BU. Applicable to SU/RB with SW version 5.5.20 and higher. Defines the DFS Detection Algorithm.
NTF brzaccVLDFSFrequencyTRAP	1.3.6.1.4.1.12394.4.1.3.107			Applicable to AU/BU only. A trap indicating that the unit moved to a new frequency.
INT brzaccVLDFSMaximumNumberOfDetectionsInAssessmentPeriod	1.3.6.1.4.1.12394.1.1.6.12.11.9.3	INTEGER	read-write	Applicable to AU/BU only. Range: 1 to 10 (Times).
INT brzaccVLDFSMinimumPulsesToDetect	1.3.6.1.4.1.12394.1.1.6.12.11.8	INTEGER	read-write	Applicable to AU/BU. Applicable to SU/RB with SW version 5.5.20 and higher. Defines the minimum number of pulses to detect a radar. Range: 1 - 100.
INT brzaccVLDFSMoveFreq	1.3.6.1.4.1.12394.1.1.14.11	INTEGER	read-only	Applicable to AU/BU with HW revision B and lower (for units with HW revision C and higher replaced by brzaccVLTrapDFSMoveFreq New to support a resolution of 0.5 MHz). The new frequency in MHz after detecting radar on a previous channel.
STR brzaccVLDFSMoveFreqNew	1.3.6.1.4.1.12394.1.1.14.12	DisplayString	read-only	Applicable to AU/BU. The new frequency in MHz after detecting radar on a previous channel. (Replaces brzaccVLDFSMoveFreq to support a resolution of 0.5 MHz for units with HW revision C and higher. If HW revision is B it will contain the same value as brzaccVLDFSMoveFreq, but represented as string.).
NTF brzaccVLDFSNoFreeChannelsExistsTRAP	1.3.6.1.4.1.12394.4.1.3.108			Applicable to AU/BU only. A trap indicating that a radar was detected and there is no free channel.
INT brzaccVLDFSOption	1.3.6.1.4.1.12394.1.1.6.12.11.1	INTEGER	read-write	Applicable to AU/BU. Applicable to SU/RB with SW version 5.5.20 and higher. Enabling/disabling the DFS Algorithm. Not applicable if DFS Option is not supported by the current Sub Band.
brzaccVLDFSParameters	1.3.6.1.4.1.12394.1.1.6.12.11
INT brzaccVLDFSRadarActivityAssessmentPeriod	1.3.6.1.4.1.12394.1.1.6.12.11.9.2	INTEGER	read-write	Applicable to AU/BU only. Range: 1 to 12 (Houres).
NTF brzaccVLDFSRadarDetectedTRAP	1.3.6.1.4.1.12394.4.1.3.106			DFS: Applicable to AU/BU only. A trap indicating that a radar was detected.
brzaccVLDFSRadarDetectionChannelsEntry	1.3.6.1.4.1.12394.1.1.6.12.11.7.1		not-accessible	Applicable to AU/BU only. An entry in the brzaccVLDFSRadarDetectionChannelsTable.
brzaccVLDFSRadarDetectionChannelsTable	1.3.6.1.4.1.12394.1.1.6.12.11.7		not-accessible	Applicable to AU/BU only. Applicable only when DFS option is on. Displays the current channels defined in the sub-band and their radar detection status.
INT brzaccVLDFSRemoteRadarEventMonitoringPeriod	1.3.6.1.4.1.12394.1.1.6.12.11.12	INTEGER	read-write	Applicable to AU only with SW version 5.5.20 and higher. Defines the interval in minutes of accumulated SU Radar Reports for the AU to leave channel. Range: 1 - 30.
INT brzaccVLDFSRemoteRadarEventReports	1.3.6.1.4.1.12394.1.1.6.12.11.11	INTEGER	read-write	Applicable to AU only with SW version 5.5.20 and higher. Defines the number of SU radar reports for the AU to leave channel . Range: 0 - 512.
INT brzaccVLDfsSupport	1.3.6.1.4.1.12394.1.1.1.18.2.1.10	INTEGER	read-only	Applicable to AU/BU only. The supported Dfs Option.
INT brzaccVLDFSSuWaitingOption	1.3.6.1.4.1.12394.1.1.6.12.11.5	INTEGER	read-write	Applicable to AU/BU only. Defines whether the associated SUs should wait for this AU/BU after it stopped transmitting due to radar detection, before they starts scanning for other AUs/BUs.
INT brzaccVLDHCPBroadcastOverrideFilter	1.3.6.1.4.1.12394.1.1.5.7.1	INTEGER	read-write	Applicable to SU/RB only. Enables or disables the broadcasting of DHCP messages, overriding the general *brzaccVLEthBroadcastFiltering Ethernet broadcast filtering option.
INT brzaccVLDHCPPPPoEOverrideFilter	1.3.6.1.4.1.12394.1.1.8.7	INTEGER	read-write	Applicable to SU, RB and AU. Not applicable to AU on 900 MHz. Enables or disables the PPPoE messages, overriding the IP Filtering option.
INT brzaccVLDHCPUnicastOverrideFilter	1.3.6.1.4.1.12394.1.1.8.5	INTEGER	read-write	Applicable to SU, RB and AU. Not applicable to AU on 900 MHz. Enables or disables the unicast DHCP messages, overriding the IP Filtering option.
brzaccVLDisassociate	1.3.6.1.4.1.12394.1.1.6.20
NTF brzaccVLDisassociateAllStationsTRAP	1.3.6.1.4.1.12394.4.1.3.115			Applicable to AU/BU only. A trap indicating that all stations were disassociated.
INT brzaccVLDisassociateAllSUs	1.3.6.1.4.1.12394.1.1.6.20.1	INTEGER	read-write	Applicable to AU only. The AU shall disassociate all its associated units.
MAC brzaccVLDisassociateSuByMacAddress	1.3.6.1.4.1.12394.1.1.6.20.2	MacAddress	read-write	Applicable to AU only. The AU shall disassociate the SU with the configured MAC address.
brzaccVLDrap	1.3.6.1.4.1.12394.1.1.7.11
brzaccVLDrapGatewayEntry	1.3.6.1.4.1.12394.1.1.11.8.1		not-accessible	A Drap Gateway Entry.
INT brzaccVLDrapGatewayIndex	1.3.6.1.4.1.12394.1.1.11.8.1.1	INTEGER	read-only	Gateway Entry's Index
IP brzaccVLDrapGatewayIP	1.3.6.1.4.1.12394.1.1.11.8.1.2	IpAddress	read-only	The IP address of the Gateway
INT brzaccVLDrapGatewayNoOfActiveVoiceCalls	1.3.6.1.4.1.12394.1.1.11.8.1.4	INTEGER	read-only	The current number of active voice calls handled by the Gateway
brzaccVLDrapGatewaysTable	1.3.6.1.4.1.12394.1.1.11.8		not-accessible	This table provides information about Gateways supporting DRAP that are registered at the AU
INT brzaccVLDrapGatewayType	1.3.6.1.4.1.12394.1.1.11.8.1.3	INTEGER	read-only	The Gateway type
INT brzaccVLDrapMaxNumberOfVoiceCalls	1.3.6.1.4.1.12394.1.1.7.11.3	INTEGER	read-write	Applicable to AU when DRAP support is enabled. Not applicable to BreezeNET B products. The maximum number of voice calls that can be supported by the AU
INT brzaccVLDrapNoOfActiveVoiceCalls	1.3.6.1.4.1.12394.1.1.7.11.5	INTEGER	read-only	Applicable to AU when DRAP support is enabled. Not applicable to BreezeNET B products. The current total number of active voice calls.
INT brzaccVLDrapSupport	1.3.6.1.4.1.12394.1.1.7.11.1	INTEGER	read-write	Applicable to AU. Not applicable to BreezeNET B products Disable/Enable the DRAP feature
INT brzaccVLDrapTTL	1.3.6.1.4.1.12394.1.1.7.11.4	INTEGER	read-write	Applicable to AU when DRAP support is enabled. Not applicable to BreezeNET B products. The maximum time between two allocation requests
INT brzaccVLDrapUdpPort	1.3.6.1.4.1.12394.1.1.7.11.2	INTEGER	read-write	Applicable to AU when DRAP support is enabled. Not applicable to BreezeNET B products. The UDP port used for the DRAP server
C32 brzaccVLDroppedFrameEvents	1.3.6.1.4.1.12394.1.1.11.2.4.1.1	Counter32	read-only	Applicable to all units. The number of frames that were dropped because they were retransmitted to the maximum allowed number of retransmissions without being acknowledged.
INT brzaccVLEnhancedETSIRadarDetection	1.3.6.1.4.1.12394.1.1.6.12.11.13	INTEGER	read-write	Applicable to AU/BU units with software version 5.5.27.1 and higher.
INT brzaccVLEraseEventLog	1.3.6.1.4.1.12394.1.1.2.12.2	INTEGER	read-write	Applicable to all units. Erase the event log.
brzaccVLErrHandlingEntry	1.3.6.1.4.1.12394.1.1.3.14.1.2.1		not-accessible
INT brzaccVLErrHandlingErrorCode	1.3.6.1.4.1.12394.1.1.3.14.1.2.1.3	INTEGER	read-only
U32 brzaccVLErrHandlingNMSId	1.3.6.1.4.1.12394.1.1.3.14.1.2.1.1	Unsigned32	read-only
INT brzaccVLErrHandlingParameter1	1.3.6.1.4.1.12394.1.1.3.14.1.2.1.4	INTEGER	read-only
INT brzaccVLErrHandlingParameter2	1.3.6.1.4.1.12394.1.1.3.14.1.2.1.5	INTEGER	read-only
INT brzaccVLErrHandlingParameter3	1.3.6.1.4.1.12394.1.1.3.14.1.2.1.6	INTEGER	read-only
INT brzaccVLErrHandlingParameter4	1.3.6.1.4.1.12394.1.1.3.14.1.2.1.7	INTEGER	read-only
INT brzaccVLErrHandlingParameter5	1.3.6.1.4.1.12394.1.1.3.14.1.2.1.8	INTEGER	read-only
U32 brzaccVLErrHandlingRequestId	1.3.6.1.4.1.12394.1.1.3.14.1.2.1.2	Unsigned32	read-only
INT brzaccVLErrHandlingSetNMSId	1.3.6.1.4.1.12394.1.1.3.14.1.1	INTEGER	read-write	Applicable to all units. The ID of the Network Management System that use Error Handling mechanism. Get request will return 0.
brzaccVLErrHandlingTable	1.3.6.1.4.1.12394.1.1.3.14.1.2		not-accessible
brzaccVLErrorHandling	1.3.6.1.4.1.12394.1.1.3.14.1
STR brzaccVLESSID	1.3.6.1.4.1.12394.1.1.6.1.1	DisplayString	read-write	Applicable to all units. The Extended Service Set ID (ESSID) used to prevent the merging of collocated systems. The ESSID is accessible only with the write community string (administrator password). Up to 31 printable case sensitive ASCII characters.
brzaccVLESSIDParameters	1.3.6.1.4.1.12394.1.1.6.1
INT brzaccVLEthBroadcastFiltering	1.3.6.1.4.1.12394.1.1.5.6	INTEGER	read-write	Applicable to SU/RB only. Enables/disables the filtering of Ethernet (layer2) broadcasts. disable : No filtering. onEthernetOnly : Filters broadcasts received on the Ethernet port only. onWirelessOnly : Filters broadcasts received on the Wlan port only. onBothWirelessAndEth: Filters broadcasts received on both ports.
brzaccVLEthBroadcastingParameters	1.3.6.1.4.1.12394.1.1.5.7
INT brzaccVLEthBroadcastMulticastLimiterOption	1.3.6.1.4.1.12394.1.1.5.7.4	INTEGER	read-write	Applicable to all units. Enable/disable the limiter for multicast and broadcast packets.
INT brzaccVLEthBroadcastMulticastLimiterSendTrapInterval	1.3.6.1.4.1.12394.1.1.5.7.6	INTEGER	read-write	Applicable to all units. The minimum time between two successive traps that are sent indicating the number of packets that were dropped by the Ethernet Broadcast/Multicast Limiter since the last trap was sent. Range: 1 to 60 minutes
INT brzaccVLEthBroadcastMulticastLimiterThreshold	1.3.6.1.4.1.12394.1.1.5.7.5	INTEGER	read-write	Applicable to all units. The limit on the number of multicast and broadcast packets when the Ethernet Broadcast/Multicast Limiter Option is enabled. Range: 0 to 204800
NTF brzaccVLEthBroadcastMulticastLimiterTRAP	1.3.6.1.4.1.12394.4.1.3.109			Applicable to all units. The trap is sent if the ethernet broadcast filter threshold is exceeded and it contains the number of dropped packets.
INT brzaccVLEthBroadcastThresholdExceeded	1.3.6.1.4.1.12394.1.1.14.13	INTEGER	read-only	Applicable to all units. The number of packets that are dropped by the ethernet broadcast/multicast limiter.
brzaccVLEthCounters	1.3.6.1.4.1.12394.1.1.11.2.2
INT brzaccVLEthernetFrameSize	1.3.6.1.4.1.12394.1.1.10.14	INTEGER	read-write	Applicable only for BNB-10 products. The maximum frame size used on Ethernet port.
INT brzaccVLEthernetLinkType	1.3.6.1.4.1.12394.1.1.5.1.2	INTEGER	read-write	Applicable to all units. VLAN support mode (Link Type). The Access Link, Extended Access Link and Extended Trunk Link options are not available for AU/BU. Service Provider Link is not available for BU/RB.
INT brzaccVLEthernetNegotiationMode	1.3.6.1.4.1.12394.1.1.2.9	INTEGER	read-write	Applicable to all units. The speed/duplex mode of the Ethernet port.
INT brzaccVLEthernetPortControl	1.3.6.1.4.1.12394.1.1.5.11.1	INTEGER	read-write	Applicable to SU/RB only. Enable/disable the Ethernet port. When disabled, only data frames are blocked. Management frames are accepted.
STR brzaccVLEventLogDestinationDir	1.3.6.1.4.1.12394.1.1.2.10.4.2	DisplayString	read-write	Applicable to all units. The destination directory of the event log file. Up to 80 printable ASCII characters. Use dot (.) To clear field.
STR brzaccVLEventLogFileName	1.3.6.1.4.1.12394.1.1.2.10.4.1	DisplayString	read-write	Applicable to all units. The name of the Event Log file to be uploaded.
brzaccVLEventLogFileParams	1.3.6.1.4.1.12394.1.1.2.12
brzaccVLEventLogFileUploading	1.3.6.1.4.1.12394.1.1.2.10.4
INT brzaccVLEventLogPolicy	1.3.6.1.4.1.12394.1.1.2.12.1	INTEGER	read-write	Applicable to all units. The lowest level event to be registered in the event log.
INT brzaccVLExecuteFTPConfigurationFileLoading	1.3.6.1.4.1.12394.1.1.2.10.3.4	INTEGER	read-write	Applicable to all units. Execution of the file download/upload operation.
INT brzaccVLExitTelnet	1.3.6.1.4.1.12394.1.1.2.7	INTEGER	read-write	Applicable to all units. Exit the management via Telnet program.
INT brzaccVLFairnessFactor	1.3.6.1.4.1.12394.1.1.6.15.2	INTEGER	read-write	Applicable AU/BU only. Not applicable to BreezeNET-B products for SW version below 4.0. The percentage of the maximum distance that is taken into account in the time slot calculation. Range: 0 to 100 (Percent). A value of 0 means the minimal slot size (9 microseconds). BreezeNET-B products with SW version below 4.0 return na. The na value is 255.
brzaccVLFeatureUpgrade	1.3.6.1.4.1.12394.1.1.2.14
STR brzaccVLFeatureUpgradeManually	1.3.6.1.4.1.12394.1.1.2.14.1	DisplayString	read-write	Applicable to all units. Upgrade unit to support new feature. Enter your license number (32 to 64 hex digits).
INT brzaccVLFlashMemoryControl	1.3.6.1.4.1.12394.1.1.2.4	INTEGER	read-write	Applicable to all units. resetAndBootFromShadowVersion : Activates the backup version. useRunningVersionAfterReset : The currently active version will become the main version and will be activated after next reset.
C32 brzaccVLFramesDelayedDueToSwRetry	1.3.6.1.4.1.12394.1.1.11.2.4.1.2	Counter32	read-only	Applicable to all units. Not applicable for units with SW Version 3.0 and higher. The number of frames that were delayed because the SW retry algorithm was activated on a previous frame designated for the same recipient.
C32 brzaccVLFramesDropped	1.3.6.1.4.1.12394.1.1.11.2.3.4	Counter32	read-only	Applicable to all units. The number of dropped frames. The frames that were retransmitted to the extent of the maximum allowed number of retransmissions without being acknowledged..
C32 brzaccVLFramesSubmittedViaHighQueue	1.3.6.1.4.1.12394.1.1.11.2.3.5.1	Counter32	read-only	Applicable to all units. Frames submitted to the internal bridge via the High priority queue. for transmission to the wireless media.
C32 brzaccVLFramesSubmittedViaLowQueue	1.3.6.1.4.1.12394.1.1.11.2.3.5.3	Counter32	read-only	Applicable to all units. Frames submitted to the internal bridge via the Low priority queue for transmission to the wireless media.
C32 brzaccVLFramesSubmittedViaMidQueue	1.3.6.1.4.1.12394.1.1.11.2.3.5.2	Counter32	read-only	Applicable to all units. Frames submitted to the internal bridge via the Mid priority queue for transmission to the wireless media.
brzaccVLFrequencyDefinition	1.3.6.1.4.1.12394.1.1.6.12
INT brzaccVLFrequencySubsetActive	1.3.6.1.4.1.12394.1.1.6.12.4.1.3	INTEGER	read-write	Applicable to SU/RB and to AU/BU. Not applicable to SU/RB with SW version 4.0 and higher. The status of an entry in the Frequency subset Table. The frequency of an active entry will be included in the final list of frequencies to be used for scanning.
brzaccVLFrequencySubsetEntry	1.3.6.1.4.1.12394.1.1.6.12.4.1		not-accessible	Applicable to SU/RB and to AU/BU. Not applicable to SU/RB with SW version 4.0 and higher. An entry in the Frequency Subset Table.
INT brzaccVLFrequencySubsetFrequency	1.3.6.1.4.1.12394.1.1.6.12.4.1.2	INTEGER	read-only	Applicable to SU/RB and to AU/BU. Not applicable to SU/RB with SW version 4.0 and higher. Applicable to all units with HW revision B and lower (for units with HW revision C and higher replaced by brzaccVLFrequencySubsetFrequencyNew to support a resolution of 0.5 MHz). The frequency in MHz of an entry in the Frequency Subset table.
STR brzaccVLFrequencySubsetFrequencyNew	1.3.6.1.4.1.12394.1.1.6.12.4.1.4	DisplayString	read-only	Applicable to all units. Not applicable to SU/RB with SW version 4.0 and higher. The frequency in MHz of an entry in the Frequency Subset table. (Replaces brzaccVLFrequencySubsetFrequency to support a resolution of 0.5 MHz for units with HW revision C and higher).
brzaccVLFrequencySubsetTable	1.3.6.1.4.1.12394.1.1.6.12.4		not-accessible	Applicable to SU/RB and to AU/BU. Not applicable to SU/RB with SW version 4.0 and higher. The Frequency Subset Table that includes all frequencies from the selected Sub-band.
INT brzaccVLFrequencySubsetTableIdx	1.3.6.1.4.1.12394.1.1.6.12.4.1.1	INTEGER	read-only	Applicable to SU/RB and to AU/BU. Not applicable to SU/RB with SW version 4.0 and higher. An index of an entry in the Frequency subset Table.
IP brzaccVLFTPClientIPAddress	1.3.6.1.4.1.12394.1.1.2.10.1.3	IpAddress	read-write	Applicable to all units. For SW version higher than 4.0 this is read-only. The IP address of the FTP stack in the unit.
IP brzaccVLFTPClientMask	1.3.6.1.4.1.12394.1.1.2.10.1.5	IpAddress	read-write	Applicable to all units. Starting with 5.0 this parameter is not appplicable. The Mask of the FTP stack in the unit.
STR brzaccVLFTPConfigurationFileSourceDir	1.3.6.1.4.1.12394.1.1.2.10.3.3	DisplayString	read-write	Applicable to all units. The source directory of the required file in the FTP server. Up to 80 printable ASCII characters. Use dot (.) To clear field
INT brzaccVLFTPDownloadSwFile	1.3.6.1.4.1.12394.1.1.2.10.2.3	INTEGER	read-write	Applicable to all units. Execution of the SW download operation
IP brzaccVLFTPGatewayIpAddress	1.3.6.1.4.1.12394.1.1.2.10.1.6	IpAddress	read-write	Applicable to all units. Starting with 5.0 this parameter is not appplicable. The FTP Gateway address
brzaccVLFTPParameters	1.3.6.1.4.1.12394.1.1.2.10
IP brzaccVLFTPServerIpAddress	1.3.6.1.4.1.12394.1.1.2.10.1.4	IpAddress	read-write	Applicable to all units. The IP address of the FTP server.
brzaccVLFTPServerParams	1.3.6.1.4.1.12394.1.1.2.10.1
STR brzaccVLFTPServerPassword	1.3.6.1.4.1.12394.1.1.2.10.1.2	DisplayString	read-write	Applicable to all units. The password to be used for access to the FTP server. Accessible only with SNMP Write Community String (administrator password).
STR brzaccVLFTPServerUserName	1.3.6.1.4.1.12394.1.1.2.10.1.1	DisplayString	read-write	Applicable to all units. The user name to be used for access to the FTP server. Accessible only with SNMP Write Community String (administrator password).
brzaccVLFTPSwDownload	1.3.6.1.4.1.12394.1.1.2.10.2
STR brzaccVLFTPSwFileName	1.3.6.1.4.1.12394.1.1.2.10.2.1	DisplayString	read-write	Applicable to all units. The name of the SW file to be downloaded.
STR brzaccVLFTPSwSourceDir	1.3.6.1.4.1.12394.1.1.2.10.2.2	DisplayString	read-write	Applicable to all units. The source directory of the required file in the FTP server. Up to 80 printable ASCII characters. Use dot (.) To clear field
INT brzaccVLGracefulDegradationLimit	1.3.6.1.4.1.12394.1.1.7.8	INTEGER	read-write	Applicable to AU only. Not applicable to BreezeNET-B products. The maximum limit for activating the graceful degradation algorithm. Range: 0 to 70% rate of the CIR. BreezeNET-B products return 255.
INT brzaccVLHardwareRetries	1.3.6.1.4.1.12394.1.1.10.8	INTEGER	read-write	Applicable to all units. Not applicable if Wireless Link Prioritization is enabled. The maximum number of trials to transmit an unacknowledged frame in each Hardware Retrial phase. Range : 1 to 14.
INT brzaccVLHiddenESSIDAge	1.3.6.1.4.1.12394.1.1.11.9.1.2	INTEGER	read-only	The time (in second) passed since the corresponding AU/BU rejected the subscriber because of wrong ESSID
brzaccVLHiddenESSIDEntry	1.3.6.1.4.1.12394.1.1.11.9.1		not-accessible	Applicable to SU/RB only with SW version 5.0 and higher. An entry in the Hidden ESSID table.
MAC brzaccVLHiddenESSIDMacAddress	1.3.6.1.4.1.12394.1.1.11.9.1.1	MacAddress	read-only	The MAC Address of the staion that rejected the subscriber beacuse of wrong ESSID
brzaccVLHiddenESSIDParameters	1.3.6.1.4.1.12394.1.1.6.1.5
brzaccVLHiddenESSIDTable	1.3.6.1.4.1.12394.1.1.11.9		not-accessible	Applicable to SU/RB only with SW version 5.0 and higher. The AU/BU units that rejected the subcribers because of worng ESSID
INT brzaccVLHWRetriesHighPriority	1.3.6.1.4.1.12394.1.1.7.10.4.3	INTEGER	read-write	Applicable only to AU with a license for the Wireless Link Prioritization feature and to BU-100. Applicable only if the Wireless Link Prioritization Option is enabled. Defines the Maximum number of HW Retries for a unicast data packet that has High Priority
INT brzaccVLHWRetriesLowPriority	1.3.6.1.4.1.12394.1.1.7.10.4.4	INTEGER	read-write	Applicable only to AU with a license for the Wireless Link Prioritization feature and to BU-100. Applicable only if the Wireless Link Prioritization Option is enabled. Defines the Maximum number of HW Retries for a unicast data packet that has Low Priority
STR brzaccVLInstallerPassword	1.3.6.1.4.1.12394.1.1.2.8.2	DisplayString	read-write	Applicable to all units. The Installer password. Up to 8 printable ASCII characters. Value read will allwais be *********
INT brzaccVLInterferenceMitigationActivation	1.3.6.1.4.1.12394.1.1.6.31.8	INTEGER	read-write	Applicable to 900 MHz units, 2.4 GHz units and BNB10. Activates Interference Mitigation, the unit is automatically reset upon activation.
INT brzaccVLInterferenceMitigationAntennaGain	1.3.6.1.4.1.12394.1.1.6.31.14	INTEGER	read-write	Applicable to 900 MHz units, 2.4 GHz units and BNB10. The Antenna Gain of the pair unit (AU/SU), expressed in dBi. Range: 10 - 17 dBi.
INT brzaccVLInterferenceMitigationAUheight	1.3.6.1.4.1.12394.1.1.6.31.13	INTEGER	read-write	Applicable to 900 MHz units, 2.4 GHz units and BNB10. The Base Station height used in determining the best noise floor in the Interference Mitigation algorithm. Range: 0 - 300 meters.
INT brzaccVLInterferenceMitigationAutomaticScanPeriod	1.3.6.1.4.1.12394.1.1.6.31.2	INTEGER	read-write	Applicable to 900 MHz units, 2.4 GHz units and BNB10. The period of time, in minutes, to execute automatic channel scanning, when performing Interference Mitigation. Range: 0 or 10-10080 minutes. A value of 0 means periodicity disabled, Interference Mitigation being performed only one time.
INT brzaccVLInterferenceMitigationChannelScanPeriod	1.3.6.1.4.1.12394.1.1.6.31.1	INTEGER	read-write	Applicable to 900 MHz units, 2.4 GHz units and BNB10. The period of time, in seconds, to stay on each channel to gather information, when performing Interference Mitigation or Spectrum Analysis. Range: 2-30 seconds.
INT brzaccVLInterferenceMitigationDeleteStatisticsFile	1.3.6.1.4.1.12394.1.1.6.31.10	INTEGER	read-write	Applicable to 900 MHz units, 2.4 GHz units and BNB10. Deletes the Interference Mitigation statistics file.
INT brzaccVLInterferenceMitigationDistance	1.3.6.1.4.1.12394.1.1.6.31.5	INTEGER	read-write	Applicable to 900 MHz units, 2.4 GHz units and BNB10. The desired value of Maximum Distance, utilized if Optimization Criteria is set to best distance, when performing Interference Mitigation. Range: 100 - 54000 meters.
INT brzaccVLInterferenceMitigationKeepLink	1.3.6.1.4.1.12394.1.1.6.31.16	INTEGER	read-write	Applicable to 900 MHz AU units, 2.4 GHz AU units and BNB10. Activates the KeepLink procedure in order to not lose SUs near the border of the cell
INT brzaccVLInterferenceMitigationMaxModulation	1.3.6.1.4.1.12394.1.1.6.31.15	INTEGER	read-write	Applicable to 900 MHz units, 2.4 GHz units and BNB10. The maximum modulation of the pair untit. Range: 1 - 8.
INT brzaccVLInterferenceMitigationModel	1.3.6.1.4.1.12394.1.1.6.31.11	INTEGER	read-write	Applicable to 900 MHz units, 2.4 GHz units and BNB10. Specifies the Installation Model used by the cell.
INT brzaccVLInterferenceMitigationOutputDistance	1.3.6.1.4.1.12394.1.1.6.31.17.1.5	INTEGER	read-only	Applicable to 900 MHz units, 2.4 GHz units and BNB10. Estimated cell radius
brzaccVLInterferenceMitigationOutputEntry	1.3.6.1.4.1.12394.1.1.6.31.17.1		not-accessible	Applicable to 900 MHz units, 2.4 GHz units and BNB10. An entry in the InterferenceMitigationOutputTable.
INT brzaccVLInterferenceMitigationOutputFrequency	1.3.6.1.4.1.12394.1.1.6.31.17.1.1	INTEGER	read-only	Applicable to 900 MHz units, 2.4 GHz units and BNB10. The channel frequency
INT brzaccVLInterferenceMitigationOutputInstallationModel	1.3.6.1.4.1.12394.1.1.6.31.17.1.3	INTEGER	read-only	Applicable to 900 MHz units, 2.4 GHz units and BNB10. Specifies the Installation Model used by the cell.
INT brzaccVLInterferenceMitigationOutputNoiseFloor	1.3.6.1.4.1.12394.1.1.6.31.17.1.4	INTEGER	read-only	Applicable to 900 MHz units, 2.4 GHz units and BNB10. Noise floor calculated for current frequency
INT brzaccVLInterferenceMitigationOutputPerformance	1.3.6.1.4.1.12394.1.1.6.31.17.1.6	INTEGER	read-only	Applicable to 900 MHz units, 2.4 GHz units and BNB10. Estimated cell performance
INT brzaccVLInterferenceMitigationOutputScanningType	1.3.6.1.4.1.12394.1.1.6.31.17.1.2	INTEGER	read-only	Applicable to 900 MHz units, 2.4 GHz units and BNB10. Type of scan that was run
brzaccVLInterferenceMitigationOutputTable	1.3.6.1.4.1.12394.1.1.6.31.17		not-accessible	Applicable to 900 MHz units, 2.4 GHz units and BNB10. A table of Clear Channel Selection or Automatic Noise Floor Selection results.
brzaccVLInterferenceMitigationParameters	1.3.6.1.4.1.12394.1.1.6.31
INT brzaccVLInterferenceMitigationScanMode	1.3.6.1.4.1.12394.1.1.6.31.4	INTEGER	read-write	Applicable to 900 MHz units, 2.4 GHz units and BNB10. The selected Optimization Criteria to choose the best result, when performing Interference Mitigation: 1 = best throughput, 2 = best distance.
INT brzaccVLInterferenceMitigationScanTime	1.3.6.1.4.1.12394.1.1.6.31.12	INTEGER	read-only	Applicable to 900 MHz units, 2.4 GHz units and BNB10. Displays the estimated value of the scan time.
INT brzaccVLInterferenceMitigationScanType	1.3.6.1.4.1.12394.1.1.6.31.3	INTEGER	read-write	Applicable to 900 MHz units, 2.4 GHz units and BNB10. The selected method for scanning, when performing Interference Mitigation.
INT brzaccVLInterferenceMitigationStatus	1.3.6.1.4.1.12394.1.1.6.31.9	INTEGER	read-only	Applicable to 900 MHz units, 2.4 GHz units and BNB10. Defines whether the unit is currently performing an Interference Mitigation process. Value currentlyBlocked means unit current status prohibits Interference Mitigation activation.
INT brzaccVLInterferenceMitigationThroughput	1.3.6.1.4.1.12394.1.1.6.31.6	INTEGER	read-write	Applicable to 900 MHz units, 2.4 GHz units and BNB10. The desired value of Throughput, utilized if Optimization Criteria is set to best throughput, when performing Interference Mitigation. Range: 500-10000 Kbps.
INT brzaccVLIPDSCPThreshold	1.3.6.1.4.1.12394.1.1.7.10.2.3	INTEGER	read-write	Applicable to all units. The threshold of DSCP sub-field of IP ToS field from IP Header (RFC2474) to be used when ToS Prioritization Option is set to DSCP. If the DSCP sub-field of a frame is less than or equal to this threshold the frame will have LOW priority, otherwise it will get HIGH priority.
brzaccVLIpFilterEntry	1.3.6.1.4.1.12394.1.1.8.2.1		not-accessible	Applicable to SU, RB and AU. Not applicable to AU on 900 MHz. An IP Filter Table entry.
INT brzaccVLIpFilterIdx	1.3.6.1.4.1.12394.1.1.8.2.1.4	INTEGER	read-only	Applicable to SU, RB and AU. Not applicable to AU on 900 MHz. A table index for the IP Filter Table entry.
INT brzaccVLIpFilterRange	1.3.6.1.4.1.12394.1.1.8.2.1.3	INTEGER	read-write	Applicable to SU, RB and AU. Not applicable to AU on 900 MHz. An addresses range for the IP Filter Table entry. The first address in the range is the IP address. 0 means that the range is not used. Either a mask or a range, but not both can be used to define an address group. If the range is other than 0, than the mask is ignored and only the range value is used to define the address group. Range: 0 to 255.
brzaccVLIpFilterTable	1.3.6.1.4.1.12394.1.1.8.2		not-accessible	Starting with version 5.0, this is deprecated. Use brzaccVLNewIpFilterTable instead. Applicable to SU, RB and AU. Not applicable to AU on 900 MHz. An IP Filter Table of up to 8 user defined addresses, or address groups, to be used if the selected User Filtering option is userDefinedAddrOnly.
IP brzaccVLIpID	1.3.6.1.4.1.12394.1.1.8.2.1.1	IpAddress	read-write	Applicable to SU, RB and AU. Not applicable to AU on 900 MHz. An IP address of an IP Filter Table entry.
brzaccVLIpParams	1.3.6.1.4.1.12394.1.1.4
INT brzaccVLIPPrecedenceThreshold	1.3.6.1.4.1.12394.1.1.7.10.2.2	INTEGER	read-write	Applicable to all units. The threshold of Precedence sub-field of IP ToS field from IP Header (RFC791) to be used when the ToS Prioritization Option is set to IP Precedence. If the Precedence sub-field of a frame is less than or equal to this threshold the frame will have LOW priority, otherwise it will get HIGH priority.
STR brzaccVLKey1	1.3.6.1.4.1.12394.1.1.9.7	DisplayString	read-write	Applicable to all units. Key number 1. Accessible only with SNMP Write Community String (administrator password). Valid values: 32 hexadecimal digits.
STR brzaccVLKey2	1.3.6.1.4.1.12394.1.1.9.8	DisplayString	read-write	Applicable to all units. Key number 2. Accessible only with SNMP Write Community String (administrator password). Valid values: 32 hexadecimal digits.
STR brzaccVLKey3	1.3.6.1.4.1.12394.1.1.9.9	DisplayString	read-write	Applicable to all units. Key number 3. Accessible only with SNMP Write Community String (administrator password). Valid values: 32 hexadecimal digits.
STR brzaccVLKey4	1.3.6.1.4.1.12394.1.1.9.10	DisplayString	read-write	Applicable to all units. Key number 4. Accessible only with SNMP Write Community String (administrator password). Valid values: 32 hexadecimal digits.
INT brzaccVLLastTrapSequenceNumber	1.3.6.1.4.1.12394.1.1.3.14.2.1	INTEGER	read-only	Applicable to AU/BU only. Sequence Number of Last generated Trap
INT brzaccVLLEDmode	1.3.6.1.4.1.12394.1.1.2.17.1	INTEGER	read-write	Applicable to all units with SW version 6.0 and higher, except AU. Sets the operating mode of the unit LEDS
brzaccVLLEDsettings	1.3.6.1.4.1.12394.1.1.2.17
INT brzaccVLLoadingStatus	1.3.6.1.4.1.12394.1.1.2.11	INTEGER	read-only	Applicable to all units. The status of the last loading operation.
NTF brzaccVLLoadingStatusTRAP	1.3.6.1.4.1.12394.4.1.3.104			Applicable to all units. A trap indicating that last FTP/TFTP firmware loading process has been finished successfully or failed.
INT brzaccVLLostBeaconsWatchdogThreshold	1.3.6.1.4.1.12394.1.1.6.22	INTEGER	read-write	Applicable to AU/BU only. The number of unsuccessful consecutive transmissions beacons before Internal refresh is performed. 0 means that the lost beacons watchdog is not used and internal refresh is not performed.
INT brzaccVLlowPriorityAIFS	1.3.6.1.4.1.12394.1.1.7.10.4.2	INTEGER	read-write	Applicable only to AU with a license for the Wireless Link Prioritization feature and to BU-100. Applicable only if the Wireless Link Prioritization Option is enabled. Define the AIFS (Arbitration Inter-frame Space) that will be used for transmitting Low Priority Traffic
INT brzaccVLLowPriorityTrafficMinimumPercent	1.3.6.1.4.1.12394.1.1.7.12	INTEGER	read-write	The minimum percent of the traffic rate that is allocated to the low priority traffic
brzaccVLMacAddressDatabase	1.3.6.1.4.1.12394.1.1.11.5
brzaccVLMacAddressDenyList	1.3.6.1.4.1.12394.1.1.5.10
INT brzaccVLMacAddressDenyListAction	1.3.6.1.4.1.12394.1.1.5.10.5	INTEGER	read-write	Applicable to AU only. Define the action to be used by the Mac Address Deny List. allowedList(2) means that the list becomes Allow list.
MAC brzaccVLMacAddressDenyListAdd	1.3.6.1.4.1.12394.1.1.5.10.2	MacAddress	read-write	Applicable to AU only. Not applicable to BreezeNET-B units. Add a MAC address to the MAC Address Deny List Table
brzaccVLMacAddressDenyListEntry	1.3.6.1.4.1.12394.1.1.5.10.1.1		not-accessible	Applicable to AU only. Not applicable to BreezeNET-B units. An entry in the Mac Address Deny List Table.
MAC brzaccVLMacAddressDenyListId	1.3.6.1.4.1.12394.1.1.5.10.1.1.2	MacAddress	read-write	Applicable to AU only. Not applicable to BreezeNET-B units. The list of MAC Addresses in the Mac Address Deny List Table. To Remove a MAC Address - SET the corresponding entry to 0. To Add a new MAC Address - SET an entry which is currently 0.
MAC brzaccVLMacAddressDenyListRemove	1.3.6.1.4.1.12394.1.1.5.10.3	MacAddress	read-write	Applicable to AU only. Not applicable to BreezeNET-B units. Delete a MAC address from the MAC Address Deny List Table
brzaccVLMacAddressDenyListTable	1.3.6.1.4.1.12394.1.1.5.10.1		not-accessible	Starting with version 5.0, this is deprecated. Use brzaccVLNewMacAddressDenyListTable instead. Applicable to AU only. Not applicable to BreezeNET-B units. A list of up to 100 MAC Addresses of SUs. If brzaccVLMacAddressDenyListAction is set to denyList, these are SUs that are not allowed to transfer data to the AU. If brzaccVLMacAddressDenyListAction is set to allowList, only these SUs are allowed to transfer data to the AU.
INT brzaccVLMacAddressDenyListTableIdx	1.3.6.1.4.1.12394.1.1.5.10.1.1.1	INTEGER	read-only	Applicable to AU only. Not applicable to BreezeNET-B units. A read only table index for a MAC Address entry in the Mac Address Deny List Table. Range: 1 to 100.
brzaccVLMacPinpoint	1.3.6.1.4.1.12394.1.1.11.7
brzaccVLMacPinpointEntry	1.3.6.1.4.1.12394.1.1.11.7.1.1		not-accessible	Applicable to AU/BU only. An entry in the MAC Pinpoint Table. Each entry contains an Ethernet station MAC address and the MAC address of the wireless device used to connect it to the wireless network
brzaccVLMacPinpointTable	1.3.6.1.4.1.12394.1.1.11.7.1		not-accessible	Applicable to AU/BU only. A table that contains information about wireless device used by a certain Ethernet station in order to connect to the wireless network
STR brzaccVLMainVersionFileName	1.3.6.1.4.1.12394.1.1.1.5	DisplayString	read-only	Applicable to all units. Main software version file name.
STR brzaccVLMainVersionNumber	1.3.6.1.4.1.12394.1.1.1.4	DisplayString	read-only	Applicable to all units. Main software version number.
INT brzaccVLManagementVlanID	1.3.6.1.4.1.12394.1.1.5.1.3	INTEGER	read-write	Applicable to all units. VLAN ID for management frame tagging. Range: 1 to 4094, 65535 for No VLAN tagging.
IP brzaccVLMaskID	1.3.6.1.4.1.12394.1.1.8.2.1.2	IpAddress	read-write	Applicable to SU, RB and AU. Not applicable to AU on 900 MHz. An IP Mask of an IP Filter Table entry. Either a mask or a range, but not both can be used to define an address group. If the range is other than 0, than the mask is ignored and only the range value is used to define the address group.
INT brzaccVLMaxBeaconsLost	1.3.6.1.4.1.12394.1.1.6.33	INTEGER	read-write	Applicable only to AU VL. Range: 3-64.
INT brzaccVLMaxBurstDuration	1.3.6.1.4.1.12394.1.1.7.7	INTEGER	read-write	Applicable to all units. The maximum time during which inactivity bonus time can be accumulated for future burst transmissions. Range: 0 to 2000 milliseconds.
INT brzaccVLMaxContentionWindow	1.3.6.1.4.1.12394.1.1.10.4	INTEGER	read-write	Applicable to SU and AU. For units bearing SW version 4.0 and above applicable to BreezeNET-B products, for previous SW versions not applicable to BreezeNET-B products. The maximum value to be used by the contention window calculation algorithm. Value must be power of 2 minus 1 (7,15,31...) Range: 7 to 1023.
INT brzaccVLMaxDelay	1.3.6.1.4.1.12394.1.1.7.6	INTEGER	read-write	Applicable to SU only. Not applicable to BreezeNET-B products. The maximal time packets may be delayed by the CIR\MIR mechanism. Above the configured maximal period the packets are discarded. Range: 300 to 10000 milliseconds. BreezeNET-B products return 65535.
INT brzaccVLMaximumBurstDuration	1.3.6.1.4.1.12394.1.1.1.18.2.1.9	INTEGER	read-only	Applicable to all units. Applicable only if Burst Mode Option is supported. The maximum supported burst duration.
INT brzaccVLMaximumCellRadius	1.3.6.1.4.1.12394.1.1.6.2	INTEGER	read-write	Applicable to all units. For AU/BU: read-write. In units with SW version 2.0 and up - applicable only when the Cell Distance Mode is set to Manual. The highest distance from the AU/BU of any SU/RB served by it. Affects the maximum time the units wait for a response message and the slot size by taking into account the round trip propagation delay. For SU/RB: read-only. The distance is learned from the AU/BU. Range: For units below version 2.0 the range is 0 - 50000 Meters. Otherwise - the range is 0 to 54 Kilometers. 0 means no compensation (minimum slot size, maximal delay timeout).
INT brzaccVLMaximumModulationLevel	1.3.6.1.4.1.12394.1.1.10.5	INTEGER	read-write	Applicable to all units. If the Adaptive Modulation algorithm is enabled, it sets the Maximum Modulation Level to be used. If The Modulation algorithm is disabled, it sets the Fixed Modulation Level to be used. The range is 1 to 8. 8 is not applicable for units with HW revision A.
brzaccVLMaximumTransmitPowerEntry	1.3.6.1.4.1.12394.1.1.6.6.1		not-accessible	Applicable to SU/RB only. An entry in the Maximum Transmit Power Table.
INT brzaccVLMaximumTransmitPowerIdx	1.3.6.1.4.1.12394.1.1.6.6.1.1	INTEGER	read-only	Applicable to SU/RB only. An index of an entry in the Maximum Transmit Power Table.
brzaccVLMaximumTransmitPowerTable	1.3.6.1.4.1.12394.1.1.6.6		not-accessible	Applicable to SU/RB only. A table of maximum transmit power parameters.
INT brzaccVLMaximumTxPower	1.3.6.1.4.1.12394.1.1.6.24	INTEGER	read-write	Applicable to only SU/RB with SW version 4.0 and higher. The Maximum Transmit Power for all modulation levels. The Maximum Transmit Power for a specific modulation level is the minimum between this parameter and the hardware limitation for that modulation level
STR brzaccVLMaximumTxPowerRange	1.3.6.1.4.1.12394.1.1.6.5.1.3	DisplayString	read-only	Applicable to all units. The allowed range for the brzaccVLTxPower parameter at the applicable modulation level . Range: -10 to the maximum allowed power level at the applicable modulation level , in dBm.
INT brzaccVLMaxModulationLevel	1.3.6.1.4.1.12394.1.1.1.18.2.1.7	INTEGER	read-only	Applicable to all units. The maximum supported modulation level.
INT brzaccVLMaxNumOfAssociations	1.3.6.1.4.1.12394.1.1.6.10	INTEGER	read-write	Applicable to AU only. Not applicable to BreezeNET-B products. Sets the upper limit for the number of SUs that can be associated with the AU. Range: For regular AUs (AU-BS, AU-SA, AU) the range is from 0 to 512 if encryption is disabled the range id form 0 to 124 if encryption is enabled For AUS-BS and AUS-SA with SW version 4.0 and higher the range is between 0 to 8 or 25 (via licensing). For AUS-BS and AUS-SA with SW version below 4.0 the range is between 0 to 5. BreezeNET-B products return 65535.
INT brzaccVLMaxNumOfAssociationsLimit	1.3.6.1.4.1.12394.1.1.6.19	INTEGER	read-only	Applicable to AU only. Not applicable to BreezeNET-B products. Shows the limit for the number of SUs that can be associated with the AU. For AU-BS, AU-SA, AU if Data Encryption is enabled, the upper limit is 124, otherwise it is 512. For AUS-BS, AUS-SA with SW version 4.0 and higher the upper limit is 8 or 25 (via licensing). For AUS-BS, AUS-SA with SW version below 4.0 the upper limit is 5. BreezeNET-B products return 65535.
INT brzaccVLMaxTxApplicableModulationLevel	1.3.6.1.4.1.12394.1.1.6.6.1.2	INTEGER	read-only	Applicable to SU/RB only. The applicable modulation level for an entry in the Maximum Transmit Power Table. Level 8 is not applicable to units with HW revision A.
STR brzaccVLMaxTxPower	1.3.6.1.4.1.12394.1.1.6.6.1.4	DisplayString	read-write	Applicable to SU/RB only. Read-only for units with SW version 4.0 and higher. The maximum value that can be configured for the brzaccVLTxPower parameter. This is also the maximum power level that can be reached by the ATPC algorithm. The range is -10 dBm to the maximum value defined by brzaccVLDefinedMaximumTxPowerRange for the applicable modulation level.
INT brzaccVLMeasuredCellDistance	1.3.6.1.4.1.12394.1.1.6.15.3	INTEGER	read-only	Applicable AU/BU only. The Maximum Cell Distance as calculated by the AU/BU. Range: 0 to 54 (Kilometers).
INT brzaccVLMeasureUpLinkQualityIndicator	1.3.6.1.4.1.12394.1.1.11.6.1	INTEGER	read-write	Applicable to SU/RB. Starts calculation of LQI. The calculation will be for a period of 10 seconds.
INT brzaccVLMinContentionWindow	1.3.6.1.4.1.12394.1.1.10.3	INTEGER	read-write	Applicable to SU and AU. For units bearing SW version 4.0 and above applicable to BreezeNET-B products, for previous SW versions not applicable to BreezeNET-B products. The initial value to be used by the contention window calculation algorithm. Value must be 0 or power of 2 minus 1 (7,15,31...). Range: 0 to 1023, excluding 1 and 3. BreezeNET-B products with SW version below 4.0 return 65535.
INT brzaccVLMinimumHwRevision	1.3.6.1.4.1.12394.1.1.1.18.2.1.11	INTEGER	read-only	Applicable to all units. The Minimum HW Revision needed to support the country code.
INT brzaccVLMinimumIntervalBetweenATPCMessages	1.3.6.1.4.1.12394.1.1.6.13.4	INTEGER	read-write	Applicable AU/BU only. The minimum interval between two consecutive AU/BU to SU/RB messages. Range: 1 to 3600 (Sec).
INT brzaccVLMinimumSNRLevel	1.3.6.1.4.1.12394.1.1.6.13.3	INTEGER	read-write	Applicable AU/BU only. Defines the minimum desired level of the average SNR at the AU/BU. Below this level, if AtpcOption is enabled, the AU/BU will transmit ATPC Power-Up messages to the applicable SU/RB. The MinimumSNRLevel cannot be higher than *MaximumSNRLevel. Range: 4 to 60 (dB).
INT brzaccVLMinIntervalBetweenAdaptiveModulationAlgorithmMessages	1.3.6.1.4.1.12394.1.1.10.9.4	INTEGER	read-write	Applicable all units. The minimum interval between two consecutive AU/BU to SU/RB messages. Range: 1 to 3600 (Sec).
INT brzaccVLMinModulationLevel	1.3.6.1.4.1.12394.1.1.1.18.2.1.6	INTEGER	read-only	Applicable to all units. The minimum supported modulation level.
INT brzaccVLMirDownlink	1.3.6.1.4.1.12394.1.1.7.2	INTEGER	read-write	Applicable to SU/RB only. The Maximum Information Rate (MIR) from AU/BU to SU/RB. MIR must be above brzaccVLCirDownlink value. Range for set: 128 to 2,048 (Kbps) for SU-3 with SW version below 4.0, 128 to 3,072 (Kbps) for SU-3 with SW version 4.0 and higher, 128 to 3,968 (Kbps) for SU-6 with SW version less than 4.0, 128 to 6,016 (Kbps) for SU-6 with SW version greater than 4.0, 128 to 14,976 (Kbps) for SU-24, 128 to 53,888 (Kbps) for SU-BD and SU-54, 128 to 13,440 (Kbps) for SU-8, 128 to 6,912 (Kbps) for RB-14, 128 to 22,016 (Kbps) for RB-28, 128 to 107,904 (Kbps) for RB-100, 128 to 6,016 (Kbps) for SU-I, 128 to 12,032 (Kbps) for SU-V, 128 to 4,992 (Kbps) for RB-10, 128 to 1,024 (Kbps) for SU-1-BD The actual value (Get) will be the entered value rounded to the nearest multiple of 128 (N*128).
INT brzaccVLMirOnlyOption	1.3.6.1.4.1.12394.1.1.7.9	INTEGER	read-write	Applicable to AU only. Not applicable to BreezeNET-B products. When brzaccMirOnly is enabled, it overrides the CIR/MIR algorithm for determining actual information rate and forces the algorithm to operate with MIR parameter settings only. When enabled, the Graceful Degradation algorithm is disabled.
INT brzaccVLMIRThresholdPercent	1.3.6.1.4.1.12394.1.1.7.14	INTEGER	read-write	Applicable to AU only. MIR Threshold Percent
INT brzaccVLMirUplink	1.3.6.1.4.1.12394.1.1.7.3	INTEGER	read-write	Applicable to SU/RB only. The Maximum Information Rate (MIR) from SU/RB to AU/BU. MIR must be above brzaccVLCirUplink value. Range for set: 128 to 2,048 (Kbps) for SU-3, 128 to 3,968 (Kbps) for SU-6 with SW version less than 4.0, 128 to 4,096 (Kbps) for SU-6 with SW version greater than 4.0, 128 to 14,976 (Kbps) for SU-24, 128 to 53,888 (Kbps) for SU-BD and SU-54, 128 to 13,440 (Kbps) for SU-8, 128 to 6,912 (Kbps) for RB-14, 128 to 22,016 (Kbps) for RB-28, 128 to 107,904 (Kbps) for RB-100, 128 to 4,096 (Kbps) for SU-I, 128 to 8,064 (Kbps) for SU-V, 128 to 4,992 (Kbps) for RB-10, 128 to 896 (Kbps) for SU-1-BD The actual value (Get) will be the entered value rounded to the nearest multiple of 128 (N*128).
IP brzaccVLMngIpRangeEnd	1.3.6.1.4.1.12394.1.1.3.10.1.4	IpAddress	read-write	Applicable to all units. End Address of the range. Used only if brzaccVLMngIpRangeFlag is rangeDefinedByStartEndAddr
brzaccVLMngIpRangeEntry	1.3.6.1.4.1.12394.1.1.3.10.1		not-accessible	Applicable to all units. A Management IP Address Ranges Table entry
INT brzaccVLMngIpRangeFlag	1.3.6.1.4.1.12394.1.1.3.10.1.2	INTEGER	read-write	Applicable to all units. Defines the method of defining the range: Using Start & End Address( rangeDefinedByStartEndAddr ), or using Start Address and Mask ( rangeDefinedByStartAddrSubNetMask ).
INT brzaccVLMngIpRangeIdx	1.3.6.1.4.1.12394.1.1.3.10.1.1	INTEGER	read-only	Applicable to all units. Index of an entry in the Management IP Address Ranges Table
IP brzaccVLMngIpRangeMask	1.3.6.1.4.1.12394.1.1.3.10.1.5	IpAddress	read-write	Applicable to all units. End Address of the range. Used only if brzaccVLMngIpRangeFlag is rangeDefinedByStartAddrMask
brzaccVLMngIpRangesTable	1.3.6.1.4.1.12394.1.1.3.10		not-accessible	Starting with version 5.0, this is deprecated. Use brzaccVLNewMngIpRangesTable instead. Applicable to all units. Table of Management IP Address Ranges
IP brzaccVLMngIpRangeStart	1.3.6.1.4.1.12394.1.1.3.10.1.3	IpAddress	read-write	Applicable to all units. Start Address of the range
INT brzaccVLMulticastModulationLevel	1.3.6.1.4.1.12394.1.1.10.6	INTEGER	read-write	Applicable to AU/BU only. The modulation level for multicast and broadcast data frames. The range is 1 to 8. 8 is not applicable for units with HW revision A.
INT brzaccVLNeighborAuAdapModOption	1.3.6.1.4.1.12394.1.1.6.11.4.1.11	INTEGER	read-only	Applicable to SU/RB only. Neighbor AU/BU adaptive modulation option configuration in the Neighbor AU/BU Table.
INT brzaccVLNeighborAuAssocLoadStatus	1.3.6.1.4.1.12394.1.1.6.11.4.1.5	INTEGER	read-only	Applicable to SU/RB only. Neighbor AU/BU association load status in the Neighbor AU/BU Table.
INT brzaccVLNeighborAuAtpcOption	1.3.6.1.4.1.12394.1.1.6.11.4.1.10	INTEGER	read-only	Applicable to SU/RB only. Neighbor AU/BU ATPC option configuration in the Neighbor AU/BU Table.
INT brzaccVLNeighborAuAuthOption	1.3.6.1.4.1.12394.1.1.6.11.4.1.19	INTEGER	read-only	Applicable to SU/RB only. Neighbor AU/BU authentication option configuration in the Neighbor AU/BU Table.
INT brzaccVLNeighborAuBurstModeOption	1.3.6.1.4.1.12394.1.1.6.11.4.1.12	INTEGER	read-only	Applicable to SU/RB only. Neighbor AU/BU burst mode option configuration in the Neighbor AU/BU Table.
INT brzaccVLNeighborAuConcatenationOption	1.3.6.1.4.1.12394.1.1.6.11.4.1.15	INTEGER	read-only	Applicable to SU/RB only. Neighbor AU/BU concatenation option configuration in the Neighbor AU/BU Table.
INT brzaccVLNeighborAuCountryCode	1.3.6.1.4.1.12394.1.1.6.11.4.1.8	INTEGER	read-only	Applicable to SU/RB only. Neighbor AU/BU supported country code in the Neighbor AU/BU Table.
INT brzaccVLNeighborAuDataEncyptOption	1.3.6.1.4.1.12394.1.1.6.11.4.1.20	INTEGER	read-only	Applicable to SU/RB only. Neighbor AU/BU data encryption option configuration in the Neighbor AU/BU Table.
INT brzaccVLNeighborAuDfsOption	1.3.6.1.4.1.12394.1.1.6.11.4.1.14	INTEGER	read-only	Applicable to SU/RB only. Neighbor AU/BU DFS option configuration in the Neighbor AU/BU Table.
brzaccVLNeighborAuEntry	1.3.6.1.4.1.12394.1.1.6.11.4.1		not-accessible	Applicable to SU/RB only. An entry in the Neighbor AU/BU Table.
STR brzaccVLNeighborAuESSID	1.3.6.1.4.1.12394.1.1.6.11.4.1.3	DisplayString	read-only	Applicable to SU/RB only. The ESSID of an AU/BU in the Neighbor AU/BU Table. Accessible only with SNMP Write Community.
INT brzaccVLNeighborAuHwRevision	1.3.6.1.4.1.12394.1.1.6.11.4.1.7	INTEGER	read-only	Applicable to SU/RB only. Neighbor AU/BU HW revision in the Neighbor AU/BU Table.
INT brzaccVLNeighborAuIdx	1.3.6.1.4.1.12394.1.1.6.11.4.1.1	INTEGER	read-only	Applicable to SU/RB only. An index of an entry in the Neighbor AU/BU Table.
INT brzaccVLNeighborAuLearnCountryCodeBySU	1.3.6.1.4.1.12394.1.1.6.11.4.1.17	INTEGER	read-only	Applicable to SU only. Starting with 4.0 is not applicable for BA4900 and BreezeNET B products. Neighbor AU Learn Country Code by SU configuration in the Neighbor AU Table.
MAC brzaccVLNeighborAuMacAdd	1.3.6.1.4.1.12394.1.1.6.11.4.1.2	MacAddress	read-only	Applicable to SU/RB only. A MAC address of an AU/BU in the Neighbor AU/BU Table.
INT brzaccVLNeighborAuMark	1.3.6.1.4.1.12394.1.1.6.11.4.1.6	INTEGER	read-only	Applicable to SU/RB only. Neighbor AU/BU mark in the Neighbor AU/BU Table.
INT brzaccVLNeighborAuPerSuDistanceLearning	1.3.6.1.4.1.12394.1.1.6.11.4.1.21	INTEGER	read-only	Applicable to SU only. Neighbor AU per SU distance learning option configuration in the Neighbor AU Table.
INT brzaccVLNeighborAuRSSI	1.3.6.1.4.1.12394.1.1.6.11.4.1.22	INTEGER	read-only	Applicable to SU/RB only. The Recieved Signal Strength Indication of an AU/BU in the Neighbor AU/BU Table. If the returned value is 255 this means that the indication is not available. This value is given in dBm units.
INT brzaccVLNeighborAuSecurityMode	1.3.6.1.4.1.12394.1.1.6.11.4.1.18	INTEGER	read-only	Applicable to SU/RB only. Neighbor AU/BU security mode configuration in the Neighbor AU/BU Table.
INT brzaccVLNeighborAuSNR	1.3.6.1.4.1.12394.1.1.6.11.4.1.4	INTEGER	read-only	Applicable to SU/RB only. The received signal quality (SNR) in dB of an AU/BU in the Neighbor AU/BU Table. If the returned value is 255 this means that the indication is not available.
STR brzaccVLNeighborAuSwVer	1.3.6.1.4.1.12394.1.1.6.11.4.1.9	DisplayString	read-only	Applicable to SU/RB only. Neighbor AU/BU SW version in the Neighbor AU/BU Table.
brzaccVLNeighborAuTable	1.3.6.1.4.1.12394.1.1.6.11.4		not-accessible	Applicable to SU/RB only. A table of data on neighboring AUs/BUs.
INT brzaccVLNewAdbAdapModOption	1.3.6.1.4.1.12394.1.1.11.5.1.3.1.16	INTEGER	read-only	Applicable to AU/BU only with SW version 5.0 and higher. The SU/RB adaptive modulation option configuration. It is not applicable for SU-EZ.
INT brzaccVLNewAdbAge	1.3.6.1.4.1.12394.1.1.11.5.1.3.1.24	INTEGER	read-only	Applicable to AU/BU only with SW version 5.0 and higher. The time since any packet was received from the relevant SU/RB.
INT brzaccVLNewAdbAIFS	1.3.6.1.4.1.12394.1.1.11.5.1.3.1.50	INTEGER	read-only	Applicable to AU/BU only with SW version 5.0 and higher. The Arbitration Inter-Frame Spacing (AIFS) of relevant SU/RB. Not available for SU-EZ and it returns 0.
INT brzaccVLNewAdbAtpcOption	1.3.6.1.4.1.12394.1.1.11.5.1.3.1.15	INTEGER	read-only	Applicable to AU/BU only with SW version 5.0 and higher. The SU/RB ATPC option configuration.
INT brzaccVLNewAdbAuthOption	1.3.6.1.4.1.12394.1.1.11.5.1.3.1.20	INTEGER	read-only	Applicable to AU/BU only with SW version 5.0 and higher. The SU/RB authentication algorithm configuration. Not available for SU-EZ.
STR brzaccVLNewAdbBootVer	1.3.6.1.4.1.12394.1.1.11.5.1.3.1.8	DisplayString	read-only	Applicable to AU/BU only with SW version 5.0 and higher. The SU/RB Boot Version. Not available for SU-EZ.
INT brzaccVLNewAdbBurstModeOption	1.3.6.1.4.1.12394.1.1.11.5.1.3.1.17	INTEGER	read-only	Applicable to AU/BU only with SW version 5.0 and higher. The SU/RB burst mode option configuration. It is not applicable for SU-EZ.
INT brzaccVLNewAdbCirMaxDelay	1.3.6.1.4.1.12394.1.1.11.5.1.3.1.14	INTEGER	read-only	Applicable to AU/BU only with SW version 5.0 and higher. For BreezeNET-B products and SU-EZ with SW version 1.00.15 it is not relevant. The value configured in the relevant SU/RB for the CIR Maximum Delay parameter. It returns maximum value on 32 bits for SU-EZ with 1.00.15 and this means NA (Not Available).
INT brzaccVLNewAdbCirRx	1.3.6.1.4.1.12394.1.1.11.5.1.3.1.12	INTEGER	read-only	Applicable to AU/BU only with SW version 5.0 and higher. For BreezeNET-B products it is 0. This parameter is not relevant for SU-EZ with version 1.00.15 and it is 0. The value configured in the relevant SU for the CIR: AU to SU parameter.
INT brzaccVLNewAdbCirTx	1.3.6.1.4.1.12394.1.1.11.5.1.3.1.10	INTEGER	read-only	Applicable to AU/BU only with SW version 5.0 and higher. For BreezeNET-B products it is 0. For SU_EZ with SW version 1.00.15 is not relevant and it is 0. The value configured in the relevant SU for the CIR: SU to AU parameter.
INT brzaccVLNewAdbConcatenationOption	1.3.6.1.4.1.12394.1.1.11.5.1.3.1.18	INTEGER	read-only	Applicable to AU/BU only with SW version 5.0 and higher. The SU/RB concatenation option configuration. It is not applicable for SU-EZ.
INT brzaccVLNewAdbCountryCode	1.3.6.1.4.1.12394.1.1.11.5.1.3.1.9	INTEGER	read-only	Applicable to AU/BU only with SW version 5.0 and higher. The SU/RB country code. 9999 means unavailable country code
STR brzaccVLNewAdbCpldVer	1.3.6.1.4.1.12394.1.1.11.5.1.3.1.7	DisplayString	read-only	Applicable to AU/BU only with SW version 5.0 and higher. The SU/RB CPLD Version. Not available for SU-EZ.
INT brzaccVLNewAdbDataEncyptOption	1.3.6.1.4.1.12394.1.1.11.5.1.3.1.21	INTEGER	read-only	Applicable to AU/BU only with SW version 5.0 and higher. The SU/RB data encryption option configuration. Not available for SU-EZ.
INT brzaccVLNewAdbDfsOption	1.3.6.1.4.1.12394.1.1.11.5.1.3.1.55	INTEGER	read-only	Applicable to AU/BU only with SW version 5.5.21 and higher. The DFS option configuration received by the AU/BU from the relevant SU/RB.
INT brzaccVLNewAdbDistance	1.3.6.1.4.1.12394.1.1.11.5.1.3.1.25	INTEGER	read-only	Applicable to AU/BU only with SW version 5.0 and higher. The distance between the SU/RB and the AU/BU (In Kilometers). It is not applicable for SU-EZ and it returns 0.
C32 brzaccVLNewAdbDroppedFramesTotal	1.3.6.1.4.1.12394.1.1.11.5.1.3.1.29	Counter32	read-only	Applicable to AU/BU only with SW version 5.0 and higher. Counts the total number of frames intended to the SU/RB that were dropped because they were retransmitted to the extent of the maximum allowed number of retransmissions without being acknowledged.
STR brzaccVLNewAdbESSID	1.3.6.1.4.1.12394.1.1.11.5.1.3.1.53	DisplayString	read-only	Applicable to AU/BU only with SW version 5.0 and higher. The ESSID of relevant SU/RB. The ESSID is accessible only with the write community string (administrator password).
INT brzaccVLNewAdbHwRevision	1.3.6.1.4.1.12394.1.1.11.5.1.3.1.6	INTEGER	read-only	Applicable to AU/BU only with SW version 5.0 and higher. The SU/RB HW Revision. Not available for SU-EZ.
IP brzaccVLNewAdbIPaddress	1.3.6.1.4.1.12394.1.1.11.5.1.3.1.2	IpAddress	read-only	Applicable to AU/BU only with SW version 5.0 and higher. The Running IP address of the relevant SU/RB. Not available for SU-EZ with SW version lower than 1.1.1
MAC brzaccVLNewAdbMacAddress	1.3.6.1.4.1.12394.1.1.11.5.1.3.1.1	MacAddress	read-only	Applicable to AU/BU only with SW version 5.0 and higher. The MAC Address of an SU/RB entry in the MAC Address Database table.
STR brzaccVLNewAdbMainSwVersion	1.3.6.1.4.1.12394.1.1.11.5.1.3.1.46	DisplayString	read-only	Applicable to AU/BU only with SW version 5.0 and higher. Main Software Version of SU. Not available for SU-EZ.
INT brzaccVLNewAdbMaximumCW	1.3.6.1.4.1.12394.1.1.11.5.1.3.1.52	INTEGER	read-only	Applicable to AU/BU only with SW version 5.0 and higher. The Maximum Contention Window of relevant SU/RB. Not available for SU-EZ and it returns 0.
INT brzaccVLNewAdbMaxModulationLevel	1.3.6.1.4.1.12394.1.1.11.5.1.3.1.27	INTEGER	read-only	Applicable to AU/BU only with SW version 5.0 and higher. The value configured in the relevant SU/RB for the Maximum Modulation Level parameter. Modulation Level 8 is not applicable for units with HW revision A. It is not applicable for SU-EZ and it returns na.
INT brzaccVLNewAdbMinimumCW	1.3.6.1.4.1.12394.1.1.11.5.1.3.1.51	INTEGER	read-only	Applicable to AU/BU only with SW version 5.0 and higher. The Minimum Contention Window of relevant SU/RB. Not available for SU-EZ and it returns 0.
INT brzaccVLNewAdbMirRx	1.3.6.1.4.1.12394.1.1.11.5.1.3.1.13	INTEGER	read-only	Applicable to AU/BU only with SW version 5.0 and higher. This parameter is not relevant for SU-EZ with version 1.00.15 and it is 0. The value configured in the relevant SU/RB for the MIR: AU/BU to SU/RB parameter.
INT brzaccVLNewAdbMirTx	1.3.6.1.4.1.12394.1.1.11.5.1.3.1.11	INTEGER	read-only	Applicable to AU/BU only with SW version 5.0 and higher. The value configured in the relevant SU/RB for the MIR: SU/RB to AU/BU parameter. For SU-EZ SW version 1.00.15, it represents the value set in AU-EZ.
STR brzaccVLNewAdbReadOnlyCommunity	1.3.6.1.4.1.12394.1.1.11.5.1.3.1.48	DisplayString	read-only	Applicable to AU/BU only with SW version 5.0 and higher . SU/RB Read Only Community. Not available for SU-EZ.
INT brzaccVLNewAdbRSSI	1.3.6.1.4.1.12394.1.1.11.5.1.3.1.54	INTEGER	read-only	Applicable to AU/BU only with SW version 5.1 and higher. The average Received Signal Strength Indication of frames received by the AU/BU from the relevant SU/RB. This value is given in dBm units.
INT brzaccVLNewAdbSecurityMode	1.3.6.1.4.1.12394.1.1.11.5.1.3.1.19	INTEGER	read-only	Applicable to AU/BU only with SW version 5.0 and higher. The SU/RB security mode configuration. Not available for SU-EZ.
STR brzaccVLNewAdbShadowSwVersion	1.3.6.1.4.1.12394.1.1.11.5.1.3.1.47	DisplayString	read-only	Applicable to AU/BU only with SW version 5.0 and higher. Shadow Software Version of SU. Not available for SU-EZ.
INT brzaccVLNewAdbSNR	1.3.6.1.4.1.12394.1.1.11.5.1.3.1.26	INTEGER	read-only	Applicable to AU/BU only with SW version 5.0 and higher. The average Signal to Noise Ratio in dB of frames received by the AU/BU from the relevant SU/RB.
INT brzaccVLNewAdbStatus	1.3.6.1.4.1.12394.1.1.11.5.1.3.1.23	INTEGER	read-only	Applicable to AU/BU only with SW version 5.0 and higher. The status of the relevant SU/RB.
STR brzaccVLNewAdbSwVersion	1.3.6.1.4.1.12394.1.1.11.5.1.3.1.5	DisplayString	read-only	Applicable to AU/BU only with SW version 5.0 and higher. The SW version of the relevant SU/RB. Not available for SU-EZ.
C32 brzaccVLNewAdbTxFailedModLevel1	1.3.6.1.4.1.12394.1.1.11.5.1.3.1.38	Counter32	read-only	Applicable to AU/BU only with SW version 5.0 and higher. Counts the total number of failures to successfully transmit unicast frames intended to the SU/RB using modulation level 1.
C32 brzaccVLNewAdbTxFailedModLevel2	1.3.6.1.4.1.12394.1.1.11.5.1.3.1.39	Counter32	read-only	Applicable to AU/BU only with SW version 5.0 and higher. Counts the total number of failures to successfully transmit unicast frames intended to the SU/RB using modulation level 2.
C32 brzaccVLNewAdbTxFailedModLevel3	1.3.6.1.4.1.12394.1.1.11.5.1.3.1.40	Counter32	read-only	Applicable to AU/BU only with SW version 5.0 and higher. Counts the total number of failures to successfully transmit unicast frames intended to the SU/RB using modulation level 3.
C32 brzaccVLNewAdbTxFailedModLevel4	1.3.6.1.4.1.12394.1.1.11.5.1.3.1.41	Counter32	read-only	Applicable to AU/BU only with SW version 5.0 and higher. Counts the total number of failures to successfully transmit unicast frames intended to the SU/RB using modulation level 4.
C32 brzaccVLNewAdbTxFailedModLevel5	1.3.6.1.4.1.12394.1.1.11.5.1.3.1.42	Counter32	read-only	Applicable to AU/BU only with SW version 5.0 and higher. Counts the total number of failures to successfully transmit unicast frames intended to the SU/RB using modulation level 5.
C32 brzaccVLNewAdbTxFailedModLevel6	1.3.6.1.4.1.12394.1.1.11.5.1.3.1.43	Counter32	read-only	Applicable to AU/BU only with SW version 5.0 and higher. Counts the total number of failures to successfully transmit unicast frames intended to the SU/RB using modulation level 6.
C32 brzaccVLNewAdbTxFailedModLevel7	1.3.6.1.4.1.12394.1.1.11.5.1.3.1.44	Counter32	read-only	Applicable to AU/BU only with SW version 5.0 and higher. Counts the total number of failures to successfully transmit unicast frames intended to the SU/RB using modulation level 7.
C32 brzaccVLNewAdbTxFailedModLevel8	1.3.6.1.4.1.12394.1.1.11.5.1.3.1.45	Counter32	read-only	Applicable to AU/BU only with SW version 5.0 and higher. Counts the total number of failures to successfully transmit unicast frames intended to the SU/RB using modulation level 8. Not applicable for units with HW revision A.
C32 brzaccVLNewAdbTxFramesTotal	1.3.6.1.4.1.12394.1.1.11.5.1.3.1.28	Counter32	read-only	Applicable to AU/BU only with SW version 5.0 and higher. Counts the total number of unicast frames (excluding retransmissions) that were successfully transmitted to the SU/RB over the wireless link.
C32 brzaccVLNewAdbTxSuccessModLevel1	1.3.6.1.4.1.12394.1.1.11.5.1.3.1.30	Counter32	read-only	Applicable to AU/BU only with SW version 5.0 and higher. Counts the total number of unicast frames (excluding retransmissions) that were successfully transmitted to the SU/RB over the wireless link using modulation level 1.
C32 brzaccVLNewAdbTxSuccessModLevel2	1.3.6.1.4.1.12394.1.1.11.5.1.3.1.31	Counter32	read-only	Applicable to AU/BU only with SW version 5.0 and higher. Counts the total number of unicast frames (excluding retransmissions) that were successfully transmitted to the SU/RB over the wireless link using modulation level 2.
C32 brzaccVLNewAdbTxSuccessModLevel3	1.3.6.1.4.1.12394.1.1.11.5.1.3.1.32	Counter32	read-only	Applicable to AU/BU only with SW version 5.0 and higher. Counts the total number of unicast frames (excluding retransmissions) that were successfully transmitted to the SU/BU over the wireless link using modulation level 3.
C32 brzaccVLNewAdbTxSuccessModLevel4	1.3.6.1.4.1.12394.1.1.11.5.1.3.1.33	Counter32	read-only	Applicable to AU/BU only with SW version 5.0 and higher. Counts the total number of unicast frames (excluding retransmissions) that were successfully transmitted to the SU/RB over the wireless link using modulation level 4.
C32 brzaccVLNewAdbTxSuccessModLevel5	1.3.6.1.4.1.12394.1.1.11.5.1.3.1.34	Counter32	read-only	Applicable to AU/BU only with SW version 5.0 and higher. Counts the total number of unicast frames (excluding retransmissions) that were successfully transmitted to the SU/RB over the wireless link using modulation level 5.
C32 brzaccVLNewAdbTxSuccessModLevel6	1.3.6.1.4.1.12394.1.1.11.5.1.3.1.35	Counter32	read-only	Applicable to AU/BU only with SW version 5.0 and higher. Counts the total number of unicast frames (excluding retransmissions) that were successfully transmitted to the SU/BU over the wireless link using modulation level 6.
C32 brzaccVLNewAdbTxSuccessModLevel7	1.3.6.1.4.1.12394.1.1.11.5.1.3.1.36	Counter32	read-only	Applicable to AU/BU only with SW version 5.0 and higher. Counts the total number of unicast frames (excluding retransmissions) that were successfully transmitted to the SU/RB over the wireless link using modulation level 7.
C32 brzaccVLNewAdbTxSuccessModLevel8	1.3.6.1.4.1.12394.1.1.11.5.1.3.1.37	Counter32	read-only	Applicable to AU/BU only with SW version 5.0 and higher. Counts the total number of unicast frames (excluding retransmissions) that were successfully transmitted to the SU/RB over the wireless link using modulation level 8. Not applicable for units with HW revision A.
STR brzaccVLNewAdbUnitName	1.3.6.1.4.1.12394.1.1.11.5.1.3.1.3	DisplayString	read-only	Applicable to AU/BU only with SW version 5.0 and higher. The unit name of the relevant SU/RB. Not available for SU-EZ.
INT brzaccVLNewAdbUnitType	1.3.6.1.4.1.12394.1.1.11.5.1.3.1.4	INTEGER	read-only	Applicable to AU/BU only with SW version 5.0 and higher. The type of the relevant SU/RB. su-6-1D (3) : SU-6-1D (subscriber unit supporting 6 Mbps) Starting with 5.0 this is deprecated. When a SU-6-1D is upgraded to 5.0, its type will be changed to SU-6-BD. su-6-BD (4) : SU-6-BD (subscriber unit supporting 6 Mbps). su-24-BD (5) : SU-24-BD (subscriber unit supporting 24 Mbps). rb-B14 (8) : RB-B14 (BreezeNET Remote Bridge supporting 14 Mbps). rb-B28 (9) : RB-B28 (BreezeNET Remote Bridge supporting 28 Mbps). su-BD (10) : SU-BD (subscriber unit). su-54-BD(11) : SU-54-BD (subscriber unit supporting 54 Mbps). su-3-1D (12) : SU-3-1D (subscriber unit supporting 3 Mbps). Starting with 5.0 this is deprecated. When a SU-3-1D is upgraded to 5.0, its type will be changed to SU-3-BD. su-3-4D (13) : SU-3-4D (subscriber unit supporting 3 Mbps). Starting with 5.0 SW version this unit will work in BD mode suBD4900(18) : SU-BD-4900 (BreezeAccess 4900 subscriber unit) rb-B100 (20) : BU-B100 (BreezeNET Remote Bridge unlimited throughput) su-I (21) : SU-I su-EZ (23) : SU-EZ su-8-BD (27) : SU-8-BD (subscriber unit supporting 8 Mbps). su-1-BD (28) : SU-1-BD (subscriber unit supporting 1 Mbps). su-3-L (29) : SU-3-L (subscriber unit supporting 3 Mbps). su-6-L (30) : SU-6-L (subscriber unit supporting 6 Mbps). su-12-L (31) : SU-12-L (subscriber unit supporting 12 Mbps). su (33) : SU (security subscriber unit) na (255) : Not Available
STR brzaccVLNewAdbWriteCommunity	1.3.6.1.4.1.12394.1.1.11.5.1.3.1.49	DisplayString	read-only	Applicable to AU/BU only with SW version 5.0 and higher. SU/RB Write Community The Community is accessible only with the Read-Write community string (administrator password). If the Read-Only community of the AU/BU is used this field will contain the SU/RB read-only community. Not available for SU-EZ with SW version lower than 1.1.1
STR brzaccVLNewCurrentTxPower	1.3.6.1.4.1.12394.1.1.6.27.1.4	DisplayString	read-only	Applicable to SU/RB with SW version 5.1 and higher. The actual transmit power in dBm for the applicable rate. Range: -17 to the maximum value defined by brzaccVLNewMaximumTxPowerRange for the applicable modulation level.
STR brzaccVLNewDefinedMaximumTxPowerRange	1.3.6.1.4.1.12394.1.1.6.28.1.2	DisplayString	read-only	Applicable to SU/RB only. The allowed range for the brzaccVLNewMaxTxPower parameter at the applicable modulation level . Range: -10 to the maximum allowed power level at the applicable modulation level , in dBm.
INT brzaccVLNewIpFilterCommand	1.3.6.1.4.1.12394.1.1.8.6.1.4	INTEGER	read-write	Applicable to SU, RB and AU. Not applicable to AU on 900 MHz. Supports only active(1), createAndGo(4) and destroy(6). A command for the IP Filter Table entry.
brzaccVLNewIpFilterEntry	1.3.6.1.4.1.12394.1.1.8.6.1		not-accessible	Applicable to SU, RB and AU. Not applicable to AU on 900 MHz. An IP Filter Table entry.
INT brzaccVLNewIpFilterRange	1.3.6.1.4.1.12394.1.1.8.6.1.3	INTEGER	read-write	Applicable to SU, RB and AU. Not applicable to AU on 900 MHz. An addresses range for the IP Filter Table entry. The first address in the range is the IP address. 0 means that the range is not used. Either a mask or a range, but not both can be used to define an address group. If the range is other than 0, than the mask is ignored and only the range value is used to define the address group. Range: 0 to 255.
brzaccVLNewIpFilterTable	1.3.6.1.4.1.12394.1.1.8.6		not-accessible	Applicable to SU, RB and AU. Not applicable to AU on 900 MHz. An IP Filter Table of up to 8 user defined addresses, or address groups, to be used if the selected User Filtering option is userDefinedAddrOnly.
IP brzaccVLNewIpID	1.3.6.1.4.1.12394.1.1.8.6.1.1	IpAddress	read-only	Applicable to SU, RB and AU. Not applicable to AU on 900 MHz. An IP address of an IP Filter Table entry.
INT brzaccVLNewMacAddressDenyListCommand	1.3.6.1.4.1.12394.1.1.5.10.6.1.2	INTEGER	read-write	Applicable to AU only. Not applicable to BreezeNET-B units. Supports only active(1), createAndGo(4) and destroy(6). Used for add or destroy entry.
brzaccVLNewMacAddressDenyListEntry	1.3.6.1.4.1.12394.1.1.5.10.6.1		not-accessible	Applicable to AU only. Not applicable to BreezeNET-B units. An entry in the Mac Address Deny List Table.
MAC brzaccVLNewMacAddressDenyListId	1.3.6.1.4.1.12394.1.1.5.10.6.1.1	MacAddress	read-only	Applicable to AU only. Not applicable to BreezeNET-B units. The list of MAC Addresses in the Mac Address Deny List Table.
brzaccVLNewMacAddressDenyListTable	1.3.6.1.4.1.12394.1.1.5.10.6		not-accessible	Applicable to AU only. Not applicable to BreezeNET-B units. A list of up to 100 MAC Addresses of SUs. If brzaccVLMacAddressDenyListAction is set to denyList, these are SUs that are not allowed to transfer data to the AU. If brzaccVLMacAddressDenyListAction is set to allowList, only these SUs are allowed to transfer data to the AU.
IP brzaccVLNewMaskID	1.3.6.1.4.1.12394.1.1.8.6.1.2	IpAddress	read-write	Applicable to SU, RB and AU. Not applicable to AU on 900 MHz. An IP Mask of an IP Filter Table entry. Either a mask or a range, but not both can be used to define an address group. If the range is other than 0, than the mask is ignored and only the range value is used to define the address group.
brzaccVLNewMaximumTransmitPowerEntry	1.3.6.1.4.1.12394.1.1.6.28.1		not-accessible	Applicable to SU/RB only. An entry in the Maximum Transmit Power Table.
brzaccVLNewMaximumTransmitPowerTable	1.3.6.1.4.1.12394.1.1.6.28		not-accessible	Applicable to SU/RB only. A table of maximum transmit power parameters.
STR brzaccVLNewMaximumTxPowerRange	1.3.6.1.4.1.12394.1.1.6.27.1.2	DisplayString	read-only	Applicable to all units with SW version 5.1 and higher. The allowed range for the brzaccVLNewTxPower parameter at the applicable modulation level . Range: -10 to the maximum allowed power level at the applicable modulation level , in dBm.
INT brzaccVLNewMaxModulationLevelIdx	1.3.6.1.4.1.12394.1.1.6.28.1.1	INTEGER	read-only	Applicable to SU/RB only. The applicable modulation level for an entry in the NEW Maximum Transmit Power Table. This OID also represent an index of an entry in the NEW Maximum Transmit Power Table.
STR brzaccVLNewMaxTxPower	1.3.6.1.4.1.12394.1.1.6.28.1.3	DisplayString	read-write	Applicable to SU/RB only. Read-only for units with SW version 4.0 and higher. The maximum value that can be configured for the brzaccVLNewTxPower parameter. This is also the maximum power level that can be reached by the ATPC algorithm. The range is -10 dBm to the maximum value defined by brzaccVLNewDefinedMaximumTxPowerRange for the applicable modulation level.
INT brzaccVLNewMngIpRangeCommand	1.3.6.1.4.1.12394.1.1.3.17.1.5	INTEGER	read-write	Applicable to all units. Row Status in the New Management IP Address Ranges Table
IP brzaccVLNewMngIpRangeEnd	1.3.6.1.4.1.12394.1.1.3.17.1.2	IpAddress	read-write	Applicable to all units. End Address of the range. Used only if brzaccVLMngIpRangeFlag is rangeDefinedByStartEndAddr
brzaccVLNewMngIpRangeEntry	1.3.6.1.4.1.12394.1.1.3.17.1		not-accessible	Applicable to all units. A Management IP Address Ranges Table entry
INT brzaccVLNewMngIpRangeFlag	1.3.6.1.4.1.12394.1.1.3.17.1.4	INTEGER	read-write	Applicable to all units. Defines the method of defining the range: Using Start & End Address( rangeDefinedByStartEndAddr ), or using Start Address and Mask ( rangeDefinedByStartAddrSubNetMask ).
IP brzaccVLNewMngIpRangeMask	1.3.6.1.4.1.12394.1.1.3.17.1.3	IpAddress	read-write	Applicable to all units. End Address of the range. Used only if brzaccVLMngIpRangeFlag is rangeDefinedByStartAddrMask
brzaccVLNewMngIpRangesTable	1.3.6.1.4.1.12394.1.1.3.17		not-accessible	Applicable to all units. Table of Management IP Address Ranges
IP brzaccVLNewMngIpRangeStart	1.3.6.1.4.1.12394.1.1.3.17.1.1	IpAddress	read-only	Applicable to all units. Start Address of the range
INT brzaccVLNewModulationLevelIdx	1.3.6.1.4.1.12394.1.1.6.27.1.1	INTEGER	read-only	Applicable to all units with SW version 5.1 and higher. An index ( and modulation level ) of an entry in the NewTransmitPowerTable.
brzaccVLNewNMngSystem	1.3.6.1.4.1.12394.1.1.3.14
IP brzaccVLNewNwMngIpAddress	1.3.6.1.4.1.12394.1.1.3.15.1.1	IpAddress	read-only	Applicable to all units. An IP address in the Management IP Filter Table.
INT brzaccVLNewNwMngIpAddressCommand	1.3.6.1.4.1.12394.1.1.3.15.1.2	INTEGER	read-write	Applicable to all units. Supports only active(1), createAndGo(4) and destroy(6). A command for an entry in the Management IP Filter Table.
IP brzaccVLNewNwMngTrapAddress	1.3.6.1.4.1.12394.1.1.3.16.1.2	IpAddress	read-only	Applicable to all units. An IP address in the Management Trap Table entry.
STR brzaccVLNewNwMngTrapCommunity	1.3.6.1.4.1.12394.1.1.3.16.1.1	DisplayString	read-write	Applicable to all units. The trap community associated with the applicable entry in the Management Trap Table. Up to 14 printable case sensitive ASCII characters.
INT brzaccVLNewNwTrapCommand	1.3.6.1.4.1.12394.1.1.3.16.1.3	INTEGER	read-write	Applicable to all units. Supports only active(1), createAndGo(4) and destroy(6). A command for an entry in the Management Trap Table.
brzaccVLNewTransmitPowerEntry	1.3.6.1.4.1.12394.1.1.6.27.1		not-accessible	Applicable to all units with SW version 5.1 and higher An entry in the Transmit Power Table.
brzaccVLNewTransmitPowerTable	1.3.6.1.4.1.12394.1.1.6.27		not-accessible	Applicable to all units with SW version 5.1 and higher A table of transmit power parameters.
STR brzaccVLNewTxPower	1.3.6.1.4.1.12394.1.1.6.27.1.3	DisplayString	read-write	Applicable to all units with SW version 5.1 and higher. In AU/BU: The transmit power in dBm defined for the applicable rate. In SU/RB: If ATPC is disabled, this is the transmit power in dBm defined for the applicable rate. If ATPC is enabled, it serves as the initial transmit power in dBm for the ATPC algorithm. In SU/RB: The range is -10 dBm to the power value defined by brzaccVLNewMaximumTxPower for the applicable modulation level. In AU/BU: The range is -10 dBm to the power value defined by brzaccVLNewMaximumTxPowerRange for the applicable modulation level.
INT brzaccVLNewUnitTypeTrap	1.3.6.1.4.1.12394.1.1.14.16	INTEGER	read-only	Applicable to BU/RB only. The new type of the BNET B unit.
INT brzaccVLNewVlanForwardingCommand	1.3.6.1.4.1.12394.1.1.5.1.4.3.1.2	INTEGER	read-write	Applicable to all units. Row Status in the New VLAN Forwarding Table.
brzaccVLNewVlanForwardingEntry	1.3.6.1.4.1.12394.1.1.5.1.4.3.1		not-accessible	Applicable to all units. A VLAN Forwarding Table entry. (applicable in Trunk and Service Provider links only).
brzaccVLNewVlanForwardingTable	1.3.6.1.4.1.12394.1.1.5.1.4.3		not-accessible	Applicable to all units. A VLAN Forwarding Table of up to 20 VLAN IDs of devices to which data frames are forwarded when VLAN Forwarding is Enabled. (applicable in Trunk and Service Provider links only).
INT brzaccVLNewVlanIdForwarding	1.3.6.1.4.1.12394.1.1.5.1.4.3.1.1	INTEGER	read-only	Applicable to all units. The list of VLAN ID's in the VLAN ID Forwarding Table. Range : 1 to 4094
INT brzaccVLNewVlanIdRelaying	1.3.6.1.4.1.12394.1.1.5.1.5.3.1.1	INTEGER	read-only	Applicable to AU only. Not applicable to BreezeNET-B products. The list of VLAN ID's in the VLAN ID Relaying Table. Range: 1 to 4094.
brzaccVLNewVlanRelayingEntry	1.3.6.1.4.1.12394.1.1.5.1.5.3.1		not-accessible	Applicable to AU only. Not applicable to BreezeNET-B products. A VLAN Relaying Table entry. (applicable in Trunk and Service Provider links only).
brzaccVLNewVlanRelayingTable	1.3.6.1.4.1.12394.1.1.5.1.5.3		not-accessible	Applicable to AU only. Not applicable to BreezeNET-B products. A VLAN Relaying Table of up to 20 VLAN IDs of devices to which data frames are relayed when VLAN Relaying is Enabled. (applicable in Trunk and Service Provider links only).
INT brzaccVLNewVlanRelayingTableCommand	1.3.6.1.4.1.12394.1.1.5.1.5.3.1.2	INTEGER	read-write	Applicable to AU only. Not applicable to BreezeNET-B products. Supports only active(1), createAndGo(4) and destroy(6). A command to create or destroy a VLAN entry in the VLAN Relaying Table.
INT brzaccVLNoiseFloorAvailableCalibrationOptions	1.3.6.1.4.1.12394.1.1.6.30.5	INTEGER	read-only	Applicable to all units. Indicates what types of Noise Floor Indication calibration are available: notCalibrated: means that the unit is not calibrated factoryOnly: means that the unit was calibrated in factory fieldOnly: means that the unit was calibrated in field using brzaccVLNoiseFloorIndicationRunCalibration command factoryAndField: means that unit was calibrated in factory and also in field
INT brzaccVLNoiseFloorBandwidthUsedForLastFieldCalibration	1.3.6.1.4.1.12394.1.1.6.30.4	INTEGER	read-only	Applicable to all units. Return the bandwidth used for last successful calibration of Noise Floor Indication.
INT brzaccVLNoiseFloorCalculationMode	1.3.6.1.4.1.12394.1.1.6.29.1	INTEGER	read-write	Applicable to all units.
brzaccVLNoiseFloorCalculationParameters	1.3.6.1.4.1.12394.1.1.6.29
brzaccVLNoiseFloorCalibrationParameters	1.3.6.1.4.1.12394.1.1.6.30
INT brzaccVLNoiseFloorFieldCalibrationStatus	1.3.6.1.4.1.12394.1.1.6.30.2	INTEGER	read-only	Applicable to all units. Defines weather the unit is currently under performing a noise floor indication calibration.
INT brzaccVLNoiseFloorForcedValue	1.3.6.1.4.1.12394.1.1.6.29.2	INTEGER	read-write	Applicable to all units. Range: -107 to -55
INT brzaccVLNoiseFloorLastFieldCalibrationResult	1.3.6.1.4.1.12394.1.1.6.30.3	INTEGER	read-only	Applicable to all units. Return the status of last calibration of Noise Floor Indication that was performed.
INT brzaccVLNoiseFloorRunCalibration	1.3.6.1.4.1.12394.1.1.6.30.1	INTEGER	read-write	Not applicable to 900 MHz units. Start calibration process for Noise Floor Indication. The unit will rest itself, will perform calibration and after that will reset again. The status of last calibration run can be read from brzaccVLNoiseFloorIndicationLastCalibrationResult. Get operation will return cancel(2); on 900 MHz units it will return na(255).
INT brzaccVLNoiseFloorUseCalibration	1.3.6.1.4.1.12394.1.1.6.30.6	INTEGER	read-write	Not applicable to 900 MHz units. Select if the Noise Floor reported by the unit is using the calibration of Noise Floor Indication. The value that can be choose are according with brzaccVLNoiseFloorIndicationCalibrationAvailability.
INT brzaccVLNoiseImmunityAlgorithm	1.3.6.1.4.1.12394.1.1.6.26.1	INTEGER	read-write	Applicable to all units except for units with HW revision B and lower. automatic(2) is not applicable for units with HW revision F or G. Noise Immunity Algorithm
INT brzaccVLNoiseImmunityLevel	1.3.6.1.4.1.12394.1.1.6.26.2	INTEGER	read-write	Applicable to all units except for units with HW revision B and lower. Noise Immunity Level. (255) : Not Available
brzaccVLNoiseImmunityParameters	1.3.6.1.4.1.12394.1.1.6.26
C32 brzaccVLNoOfDuplicateFramesDiscarded	1.3.6.1.4.1.12394.1.1.11.2.3.8	Counter32	read-only	Applicable to all units. The number of frames discarded due to receiving multiple copies.
C32 brzaccVLNoOfInternallyDiscardedMirCir	1.3.6.1.4.1.12394.1.1.11.2.3.9	Counter32	read-only	Applicable to all units. The number of data frames received from the Ethernet port that were discarded by the MIR/CIR mechanism either to avoid exceeding the maximum allowed information rate, or when the wireless link conditions do not enable reaching the allowed rate.
INT brzaccVLNumberOfMacAddressesInDenyList	1.3.6.1.4.1.12394.1.1.5.10.4	INTEGER	read-only	Applicable to AU only. Not applicable to BreezeNET-B units. Number of MAC addresses in the MAC Address Deny List Table.
INT brzaccVLNumOfAssociationsSinceLastReset	1.3.6.1.4.1.12394.1.1.1.11	INTEGER	read-only	Applicable to all units. The number of associations since last reset, including duplicate associations (re-associations).
INT brzaccVLNumOfRejectionsSinceLastReset	1.3.6.1.4.1.12394.1.1.1.23	INTEGER	read-only	Applicable to AU/BU only. The number of subscribers that were rejected because of wrong ESSID
INT brzaccVLNumOfSoftwareRetries	1.3.6.1.4.1.12394.1.1.10.9.3	INTEGER	read-write	Applicable to all units. Read-only for units with version 2.0. Not applicable for units with SW version 3.0 and higher. The maximum number of times to use the Software Retry mechanism when it is enabled.
INT brzaccVLNwMngFilter	1.3.6.1.4.1.12394.1.1.3.2	INTEGER	read-write	Applicable to all units. Disables or enable on one of the ports, or on both ports, IP address based filtering of management messages (e.g. SNMP , Telnet , TFTP , DHCP).
IP brzaccVLNwMngIpAddress	1.3.6.1.4.1.12394.1.1.3.3.1.1	IpAddress	read-write	Applicable to all units. An IP address in the Management IP Filter Table.
INT brzaccVLNwMngIpTableIdx	1.3.6.1.4.1.12394.1.1.3.3.1.2	INTEGER	read-only	Applicable to all units. A table index for an entry in the Management IP Filter Table.
brzaccVLNwMngParameters	1.3.6.1.4.1.12394.1.1.3
IP brzaccVLNwMngTrapAddress	1.3.6.1.4.1.12394.1.1.3.7.1.2	IpAddress	read-write	Applicable to all units. An IP address in the Management Trap Table entry.
STR brzaccVLNwMngTrapCommunity	1.3.6.1.4.1.12394.1.1.3.7.1.1	DisplayString	read-write	Applicable to all units. The trap community associated with the applicable entry in the Management Trap Table. Up to 14 printable case sensitive ASCII characters.
INT brzaccVLNwTrapTableIdx	1.3.6.1.4.1.12394.1.1.3.7.1.3	INTEGER	read-only	Applicable to all units. Tables Index for an entry in the Management Trap Table.
INT brzaccVLOFDMWeakSignal	1.3.6.1.4.1.12394.1.1.6.26.4	INTEGER	read-write	Applicable to all units except for units with HW revision B and lower.
STR brzaccVLOperatorDefaultsFileName	1.3.6.1.4.1.12394.1.1.2.10.3.2	DisplayString	read-write	Applicable to all units. The name of the Operator Defaults file to be downloaded/uploaded
STR brzaccVLOperatorESSID	1.3.6.1.4.1.12394.1.1.6.1.3	DisplayString	read-write	Applicable to AU/BU only. A secondary ESSID to support easy installation of SUs as well as the use of the Best AU/BU feature. Accessible only with SNMP Write Community Up to 31 printable case sensitive ASCII characters.
INT brzaccVLOperatorESSIDOption	1.3.6.1.4.1.12394.1.1.6.1.2	INTEGER	read-write	Applicable to AU/BU only. Enabling/disabling the use of the Operator ESSID.
C32 brzaccVLOthersTxEvents	1.3.6.1.4.1.12394.1.1.11.2.4.1.4	Counter32	read-only	Applicable to all units. The number of Tx events due to problems other than those of the other Tx Events counters.
C32 brzaccVLOverrunEvents	1.3.6.1.4.1.12394.1.1.11.2.4.2.3	Counter32	read-only	Applicable to all units. The number of frames that were discarded because the receive rate exceeded the processing capability or the capacity of the Ethernet port.
NTF brzaccVLParameterChangedTRAP	1.3.6.1.4.1.12394.4.1.3.103			Starting with version 5.0, this trap is not generated. It is replaced by brzaccVLParameterChangeTRAP. Applicable to all units. A trap indicating a change in a CIR/MIR, IP Filter or VLAN parameter.
NTF brzaccVLParameterChangeTRAP	1.3.6.1.4.1.12394.4.1.3.113			Applicable to AU/BU only with SW version 5.0 or higher. This trap is generated by AU/BU when a parameter from a group was changed. Also, if an SU/RB parameter is changed and if the parameter is in ADB the Au/BU will generate the trap for that SU/RB. brzaccVLTrapSequenceNumber - trap sequence number brzaccVLTrapUnitMacAddr - MAC Address of the AU/BU if the parametr was changed in AU/BU - MAC Address of the SU/RB if the parameter was changed in SU/RB brzaccVLTrapParameterGroupCode- Code of Parameter Group
brzaccVLPerformanceParams	1.3.6.1.4.1.12394.1.1.10
brzaccVLPerModulationLevelCounters	1.3.6.1.4.1.12394.1.1.11.2.5
INT brzaccVLPerSuDistanceLearning	1.3.6.1.4.1.12394.1.1.6.15.5	INTEGER	read-write	Aplicable to AU only. Applicable only if Cell Distance Mode is set to Automatic. When disabled, all SUs in the cell will use for the ACK Timeout the computed distance of the farthest SU. When enabled, each SU will use its own computed distance
C32 brzaccVLPhyErrors	1.3.6.1.4.1.12394.1.1.11.2.4.2.1	Counter32	read-only	Applicable to all units, only when DFS is enabled. The number of unidentified signals.
brzAccVLPortsControl	1.3.6.1.4.1.12394.1.1.5.11
INT brzaccVLPowerLevelSteps	1.3.6.1.4.1.12394.1.1.6.13.6	INTEGER	read-write	Applicable AU/BU only. The step in dB that the SU/RB will use when receiving an ATPC Power-Up/Power-Down message. Range: 1 to 20 (dB).
NTF brzaccVLPowerUpFromReset	1.3.6.1.4.1.12394.4.1.3.101			An AU/BU trap indicating power up after Reset.
INT brzaccVLPPPoEBroadcastOverrideFilter	1.3.6.1.4.1.12394.1.1.5.7.2	INTEGER	read-write	Applicable to SU/RB only. Enables or disables the broadcasting of PPPoE messages, overriding the general *brzaccVLEthBroadcastFiltering Ethernet broadcast filtering option.
MAC brzaccVLPreferredAuMacAddress	1.3.6.1.4.1.12394.1.1.6.11.3	MacAddress	read-write	Applicable to SU/RB only. The MAC address of the preferred AU/BU (overriding the Best AU/BU selection process). 000000000000 means no preferred AU/BU.
NTF brzaccVLPromiscuousModeTRAP	1.3.6.1.4.1.12394.4.1.3.105			An AU/BU trap, indicating that the AU/BU In (On) Promiscuous Mode or out (Off) Promiscuous Mode.
INT brzaccVLProportionalIRFactor	1.3.6.1.4.1.12394.1.1.7.15.1	INTEGER	read-write	Applicable to SU only. Proportional IR Factor (percentage). The weight used for computing the used MIR/CIR values.
brzaccVLProportionalIRParameters	1.3.6.1.4.1.12394.1.1.7.15
INT brzaccVLProportionalIRThresholdPercentage	1.3.6.1.4.1.12394.1.1.7.15.3	INTEGER	read-write	Applicable to SU only. When the difference between two consecutive calculations of used MIR/CIR value is bigger than this percentage from value, the new computed MIR/CIR values will be considered.
INT brzaccVLProportionalIRThresholdRate	1.3.6.1.4.1.12394.1.1.7.15.4	INTEGER	read-write	Applicable to SU only. The new computed MIR/CIR values will be considered only when the rate, on uplink or downlink respectively, is lower than the rate corresponding to this threshold rate.
INT brzaccVLProportionalIRUpdatePeriod	1.3.6.1.4.1.12394.1.1.7.15.2	INTEGER	read-write	Applicable to SU only. The period of time (in minutes) for periodical computation of used MIR/CIR values.
INT brzaccVLPulseDetectionSensitivity	1.3.6.1.4.1.12394.1.1.6.26.5	INTEGER	read-write	Applicable to all units.
INT brzaccVLQinQEthertype	1.3.6.1.4.1.12394.1.1.5.1.7.1	INTEGER	read-write	Applicable to AU and SU. Not applicable to BreezeNET-B units. The Ethernet type of the Service Provider Tag. The range is 0x8100(33024) - 0x9000(36864), 0x9100(37120), 0x9200(37376).
INT brzaccVLQinQProviderVlanID	1.3.6.1.4.1.12394.1.1.5.1.7.2	INTEGER	read-write	Applicable to SU only. VLAN ID of the Service Provider Tag.
INT brzaccVLRadioBand	1.3.6.1.4.1.12394.1.1.1.15	INTEGER	read-only	Applicable to all units. The unit's radio band.
STR brzaccVLReadOnlyPassword	1.3.6.1.4.1.12394.1.1.2.8.1	DisplayString	read-write	Applicable to all units. The User (read only) password. This is also the Read Community String. Up to 8 printable ASCII characters.
INT brzaccVLReadUpLinkQualityIndicator	1.3.6.1.4.1.12394.1.1.11.6.2	INTEGER	read-only	Applicable to SU/RB. The results of the last LQI calculation. Range: 1 to 8.
C32 brzaccVLRecievedBadFrames	1.3.6.1.4.1.12394.1.1.11.2.3.7	Counter32	read-only	Applicable to all units. The number of frames received from the wireless media with errors (CRC errors).
INT brzaccVLRegulationMaxEIRP	1.3.6.1.4.1.12394.1.1.1.18.2.1.5	INTEGER	read-only	Applicable to all units. The maximum Tx EIRP when using the applicable sub-band. A Regulation Max EIRP of 0, means no limit.
INT brzaccVLRegulationMaxTxPowerAtAntennaPort	1.3.6.1.4.1.12394.1.1.1.18.2.1.4	INTEGER	read-only	Applicable to all units. The maximum allowed Tx power when using the applicable sub-band. A RegulationMaxTxPowerAtAntennaPort of 255, means no limit
INT brzaccVLResetPerModulationLevelCounters	1.3.6.1.4.1.12394.1.1.11.2.5.1	INTEGER	read-write	Applicable to all units. Resets the per-Modulation Level counters .
INT brzaccVLResetSpectrumCounters	1.3.6.1.4.1.12394.1.1.6.18.6	INTEGER	read-write	Applicable to all units. Resets the spectrum analysis counters.
INT brzaccVLResetTrafficCounters	1.3.6.1.4.1.12394.1.1.11.2.1	INTEGER	read-write	Applicable to all units. Resets the traffic counters.
INT brzaccVLResetUnit	1.3.6.1.4.1.12394.1.1.2.1	INTEGER	read-write	Applicable to all units. Resets the unit and applies new parameter values.
INT brzaccVLRoamingOption	1.3.6.1.4.1.12394.1.1.5.9	INTEGER	read-write	Applicable to SU/RB only. Disable/enable the roaming feature. When enabled, the SU/RB will start scanning for an AU/BU after about one second of not receiving beacons or data from current AU/BU. Once it found a new AU/BU, it will also send through the wireless network a roaming SNAP on behalf of its clients informing other devices in the network of their new location. When disabled, it will wait for about seven seconds before starting scanning, and it will not send a roaming SNAP.
INT brzaccVLRTSThreshold	1.3.6.1.4.1.12394.1.1.10.1	INTEGER	read-write	Applicable to SU and AU. Not applicable to BreezeNET-B products. The minimum frame size that requires an RTS/CTS handshake. Range: For units bearing SW version 3.0 and above: 20 to 3400 bytes, for previous SW versions 20 to 1600 bytes. BreezeNET-B products return 65535.
INT brzaccVLRunningEthernetFrameSize	1.3.6.1.4.1.12394.1.1.10.15	INTEGER	read-only	Applicable only for BNB-10 products. The frame size used on Ethernet port.
INT brzaccVLRunningFrom	1.3.6.1.4.1.12394.1.1.1.3	INTEGER	read-only	Applicable to all units. The memory (main or shadow) from which the current version is running from.
STR brzaccVLRunningSoftwareVersion	1.3.6.1.4.1.12394.1.1.1.2	DisplayString	read-only	Applicable to all units. Running software version.
IP brzaccVLRunTimeDefaultIPGateway	1.3.6.1.4.1.12394.1.1.4.8	IpAddress	read-only	Applicable to all units. The run-time Gateway IP address. If DHCP is used the Run Time Gateway IP Address is the address given to the unit by the server. Otherwise it is the manually configured address.
STR brzaccVLRunTimeESSID	1.3.6.1.4.1.12394.1.1.6.1.4	DisplayString	read-only	Applicable to SU/RB only. The ESSID of the associated AU/BU. Accessible only with SNMP Write Community. Up to 31 printable ASCII characters, case sensitive.
IP brzaccVLRunTimeIPaddr	1.3.6.1.4.1.12394.1.1.4.6	IpAddress	read-only	Applicable to all units. The run-time IP address. If DHCP is used the Run Time IP Address is the address given to the unit by the server. Otherwise it is the manually configured address.
NTF brzaccVLRunTimeIPChangeTRAP	1.3.6.1.4.1.12394.4.1.3.114			Applicable to AU/BU only with SW version 5.0 or higher. This trap is generated by AU/BU when the running IP of the unit was changed. Also, if the running IP of an associated SU/RB is changed this trap will be genarated by AU/BU. brzaccVLTrapSequenceNumber - trap sequence number brzaccVLTrapUnitMacAddr - MAC Address of the AU/BU if the running IP was changed in AU/BU - MAC Address of the SU/RB if the running IP was changed in SU/RB brzaccVLTrapNewIP - New IP of the unit.
IP brzaccVLRunTimeSubNetMask	1.3.6.1.4.1.12394.1.1.4.7	IpAddress	read-only	Applicable to all units. The run-time Subnet Mask. If DHCP is used the Run Time Subnet Mask is the mask given to the unit by the server. Otherwise it is the manually configured mask.
C32 brzaccVLRXCRCPercentage	1.3.6.1.4.1.12394.1.1.11.2.3.14	Counter32	read-only	Applicable to all units. Indicates the percentage of received frames with CRC error.
C32 brzaccVLRxDecryptEvents	1.3.6.1.4.1.12394.1.1.11.2.4.2.4	Counter32	read-only	Applicable to all units. The number of frames that were not received properly due to a problem in the data decryption mechanism.
brzaccVLRxEvents	1.3.6.1.4.1.12394.1.1.11.2.4.2
INT brzaccVLSaveCurrentConfigurationAsOperatorDefaults	1.3.6.1.4.1.12394.1.1.2.6	INTEGER	read-write	Applicable to all units. Saves the current configuration as Operator Defaults. Cannot be executed after requesting set defaults and the unit was not reset.
INT brzaccVLScanningMode	1.3.6.1.4.1.12394.1.1.6.16	INTEGER	read-write	Applicable to SU/RB only. The scanning mode. In cells where the DFS Option is enabled Scanning Mode is forced to Passive.
INT brzaccVLScanningStep	1.3.6.1.4.1.12394.1.1.6.12.3	INTEGER	read-only	Applicable to all units - For flexible Sub-Bands only. For units with version 2.0 and above this is a read-only parameter. The scanning step to be used for generating the frequency subset.
INT brzaccVLSecurityMode	1.3.6.1.4.1.12394.1.1.9.5	INTEGER	read-write	Applicable to all units. The fips197 option is applicable only to units with a license to use FIPS 197 algorithm. The encryption algorithm to be used for authentication messages and/or data encryption. The aesOCB option is not applicable for AU-EZ.
INT brzaccVLSecurityModeSupport	1.3.6.1.4.1.12394.1.1.9.12	INTEGER	read-only	Applicable to all units. Returns types of encryption that are supported. 0 - no encryption 1 - WEP 2 - AES OCB 3 - WEP and AES OCB 4 - FIPS-197 5 - FIPS-197 and WEP 6 - FIPS-197 and AES OCB 7 - FIPS-197, AES OCB and WEP
brzaccVLSecurityParameters	1.3.6.1.4.1.12394.1.1.9
INT brzaccVLSelectSubBandIndex	1.3.6.1.4.1.12394.1.1.6.12.10.1	INTEGER	read-write	Applicable to all units with SW version below 4.0 For units with SW version 4.0 and up it is applicable only for AU/BU. For SU/RB it defines only the sub-band for the Spectrum Analyzer. The ID of the sub-band configured in the unit. Its range depends on unit's type and Country Code.
INT brzaccVLSendBroadcastsMulticastsAsUnicasts	1.3.6.1.4.1.12394.1.1.5.12	INTEGER	read-write	Applicable to BU only. When enabled the Multicast/Broadcast packets are sent by BU as Unicast packets to RB. When disabled the Multicast/Broadcast packets are sent by BU as Broadcast packets to RB
STR brzaccVLSerialNumber	1.3.6.1.4.1.12394.1.1.1.21	DisplayString	read-only	Applicable to all units. Serial Number of the unit
brzaccVLServiceParameters	1.3.6.1.4.1.12394.1.1.7
INT brzaccVLSetDefaults	1.3.6.1.4.1.12394.1.1.2.2	INTEGER	read-write	Applicable to all units. Sets unit configuration to Defaults values after the next reset. noDefaultSettingRequested : Read-Only Option, no Default setting was Issued. completeFactory : All parameters revert to Factory Defaults values. partialFactory : All parameters revert to Factory Defaults values, except the parameters required for maintaining wireless connectivity. completeOperator: All parameters revert to Operator Defaults values. partialOperator : All parameters revert to Operator Defaults values, except the parameters required for maintaining wireless connectivity. cancelCurrentPendingRequest : Default Setting request is cancelled.
INT brzaccVLSetSelectedFreqSubset	1.3.6.1.4.1.12394.1.1.6.12.5	INTEGER	read-write	Applicable to SU/RB and to AU/BU. Not applicable to SU/RB with SW version 4.0 and higher. Apply the selected subset. After the next reset the new subset will be used.
STR brzaccVLShadowVersionFileName	1.3.6.1.4.1.12394.1.1.1.7	DisplayString	read-only	Applicable to all units. Shadow software version file name.
STR brzaccVLShadowVersionNumber	1.3.6.1.4.1.12394.1.1.1.6	DisplayString	read-only	Applicable to all units. Shadow software version number.
brzaccVLSiteSurvey	1.3.6.1.4.1.12394.1.1.11
INT brzaccVLSoftwareRetrySupport	1.3.6.1.4.1.12394.1.1.10.9.2	INTEGER	read-write	Applicable to all units. Read-only for units with version 2.0. Not applicable for units with SW version 3.0 and higher. The status of the Software Retry mechanism. Enabled when the Adaptive Modulation algorithm is enabled and the Burst Mode Option is disabled. Otherwise it is disabled.
INT brzaccVLSpectrumAnalysisActivation	1.3.6.1.4.1.12394.1.1.6.18.4	INTEGER	read-write	Applicable to all units. Activates spectrum analysis, the unit is automatically reset upon activation.
INT brzaccVLSpectrumAnalysisChannelScanPeriod	1.3.6.1.4.1.12394.1.1.6.18.1	INTEGER	read-write	Applicable to all units. The period of staying on each channel for information gathering when performing Spectrum analysis. Range: 2-30 seconds.
INT brzaccVLSpectrumAnalysisInformationAvgNoiseFloor	1.3.6.1.4.1.12394.1.1.6.18.7.1.8	INTEGER	read-only	Applicable to all units. The average Noise Floor detected in the channel. If the unit is currently under spectrum analysis the average Noise Floor would be of the analysis that is currently performed. If the unit is in normal mode the average Noise Floor would be of the last analysis performed.
STR brzaccVLSpectrumAnalysisInformationChannel	1.3.6.1.4.1.12394.1.1.6.18.7.1.2	DisplayString	read-only	Applicable to all units. The channels in the Spectrum Analysis Information Table. If the unit is currently under spectrum analysis the channels would be those on which the analysis is currently performed. If the unit is in normal mode the channels would be the those on which the last analysis was performed.
brzaccVLSpectrumAnalysisInformationEntry	1.3.6.1.4.1.12394.1.1.6.18.7.1		not-accessible	Applicable to all units. The spectrum analysis information table entry.
INT brzaccVLSpectrumAnalysisInformationMaxNoiseFloor	1.3.6.1.4.1.12394.1.1.6.18.7.1.9	INTEGER	read-only	Applicable to all units. The maximum Noise Floor detected in the channel. If the unit is currently under spectrum analysis the maximum Noise Floor would be of the analysis that is currently performed. If the unit is in normal mode the maximum Noise Floor would be of the last analysis performed.
INT brzaccVLSpectrumAnalysisInformationOFDMAvgSnr	1.3.6.1.4.1.12394.1.1.6.18.7.1.7	INTEGER	read-only	Applicable to all units. The average SNR of the OFDM frames detected in the channel. If the unit is currently under spectrum analysis the average SNR would be of the analysis that is currently performed. If the unit is in normal mode the average SNR would be of the last analysis performed.
INT brzaccVLSpectrumAnalysisInformationOFDMFrames	1.3.6.1.4.1.12394.1.1.6.18.7.1.6	INTEGER	read-only	Applicable to all units. The number of OFDM frames detected in the channel. If the unit is currently under spectrum analysis the count would be of the analysis that is currently performed. If the unit is in normal mode the count would be of the last analysis performed.
INT brzaccVLSpectrumAnalysisInformationOFDMMaxSNR	1.3.6.1.4.1.12394.1.1.6.18.7.1.11	INTEGER	read-only	Applicable to all units. The maximum SNR of the OFDM frames detected in the channel. If the unit is currently under spectrum analysis the maximum SNR would be of the analysis that is currently performed. If the unit is in normal mode the maximum SNR would be of the last analysis performed.
INT brzaccVLSpectrumAnalysisInformationSignalCount	1.3.6.1.4.1.12394.1.1.6.18.7.1.3	INTEGER	read-only	Applicable to all units. The number of signals (excluding OFDM frames) detected in the channel. If the unit is currently under spectrum analysis the count would be of the analysis that is currently performed. If the unit is in normal mode the count would be of the last analysis performed.
INT brzaccVLSpectrumAnalysisInformationSignalMaxSNR	1.3.6.1.4.1.12394.1.1.6.18.7.1.10	INTEGER	read-only	Applicable to all units. The maximum SNR of the signals (excluding OFDM frames) detected in the channel. If the unit is currently under spectrum analysis the maximum SNR would be of the analysis that is currently performed. If the unit is in normal mode the maximum SNR would be of the last analysis performed.
INT brzaccVLSpectrumAnalysisInformationSignalSNR	1.3.6.1.4.1.12394.1.1.6.18.7.1.4	INTEGER	read-only	Applicable to all units. The approximate SNR of the signals (excluding OFDM frames) detected in the channel. If the unit is currently under spectrum analysis the SNR would be of the analysis that is currently performed. If the unit is in normal mode the SNR would be of the last analysis performed.
INT brzaccVLSpectrumAnalysisInformationSignalWidth	1.3.6.1.4.1.12394.1.1.6.18.7.1.5	INTEGER	read-only	Applicable to all units. The average width of the signals (excluding OFDM frames) detected in the channel. If the unit is currently under spectrum analysis the width would be of the analysis that is currently performed. If the unit is in normal mode the width would be of the last analysis performed.
brzaccVLSpectrumAnalysisInformationTable	1.3.6.1.4.1.12394.1.1.6.18.7		not-accessible	Applicable to all units. The spectrum analysis information table.
INT brzaccVLSpectrumAnalysisInformationTableIdx	1.3.6.1.4.1.12394.1.1.6.18.7.1.1	INTEGER	read-only	Applicable to all units. A read only table index for a Spectrum Analysis Information entry in the Spectrum Analysis Information Table.
brzaccVLSpectrumAnalysisParameters	1.3.6.1.4.1.12394.1.1.6.18
INT brzaccVLSpectrumAnalysisScanCycles	1.3.6.1.4.1.12394.1.1.6.18.2	INTEGER	read-write	Applicable to all units. The number of scanning cycles when performing Spectrum Analysis. Range: 1-100.
INT brzaccVLSpectrumAnalysisStatus	1.3.6.1.4.1.12394.1.1.6.18.5	INTEGER	read-only	Applicable to all units. Defines whether the unit is currently performing a Spectrum Analysis process. Value currentlyBlocked means unit current status prohibits Spectrum Analysis activation.
INT brzaccVLSpuriousImmunityLevel	1.3.6.1.4.1.12394.1.1.6.26.3	INTEGER	read-write	Applicable to all units except for units with HW revision B and lower. (255) : Not Available
NTF brzaccVLSUassociatedAUTRAP	1.3.6.1.4.1.12394.4.1.3.2			An AU/BU trap indicating a new association with an SU/RB.
NTF brzaccVLSUassociatedTRAP	1.3.6.1.4.1.12394.4.1.3.6			Starting with 5.0 this trap is not generated. An SU/RB trap indicating association with an AU/BU. In addition to the MAC address information of the AU/BU, the trap also includes information on the average SNR of frames received from the AU/BU.
INT brzaccVLSubBandLowerFrequency	1.3.6.1.4.1.12394.1.1.6.12.1	INTEGER	read-write	Applicable to SU only. Not applicable to units with SW version 2.0 or higher. The lowest frequency in the subset to be used for scanning. For 5.8GHz products the range is 5740 to 5830 MHz using 10MHz resolution. For 4.9GHz products the range is 4920 to 5080 MHz using 10MHz resolution. For HW Revision C and above this leaf is not relevant - shall return 0.
brzaccVLSubBandSelect	1.3.6.1.4.1.12394.1.1.6.12.10
INT brzaccVLSubBandUpperFrequency	1.3.6.1.4.1.12394.1.1.6.12.2	INTEGER	read-write	Applicable to SU only. Not applicable to units with SW version 2.0 or higher. The highest frequency in the subset to be used for scanning. For 5.8GHz products the range is 5740 to 5830 MHz using 10MHz resolution. For 4.9GHz products the range is 4920 to 5080 MHz using 10MHz resolution. For HW Revision C and above this leaf is not relevant - shall return 0.
IP brzaccVLSubNetMask	1.3.6.1.4.1.12394.1.1.4.2	IpAddress	read-write	Applicable to all units. Subnet mask of the unit.
INT brzaccVLSUBurstDurationHighPriority	1.3.6.1.4.1.12394.1.1.7.10.4.7	INTEGER	read-write	Applicable only to AU with a license for the Wireless Link Prioritization feature and to BU-100. Applicable only if the Wireless Link Prioritization Option is enabled. Defines the Maximum duration of burst that can be done by SU/RB with High Priority packets. The parameter is configurable in AU and the SUs/RB will learn it form AU/BU. The time is given in 250 microseconds units
INT brzaccVLSUBurstDurationLowPriority	1.3.6.1.4.1.12394.1.1.7.10.4.8	INTEGER	read-write	Applicable only to AU with a license for the Wireless Link Prioritization feature and to BU-100. Applicable only if the Wireless Link Prioritization Option is enabled. Defines the Maximum duration of burst that can be done by SU/RB with High Priority packets. The parameter is configurable in AU/BU and the SUs/RB will learn it from AU/BU. The time is given in 250 microseconds units
INT brzaccVLSUDefaultKeyID	1.3.6.1.4.1.12394.1.1.9.2	INTEGER	read-write	Applicable to SU/RB only. The key to be used for encryption of authentication messages and/or data. Range: 1 to 4.
INT brzaccVLSUEZMirDownlink	1.3.6.1.4.1.12394.1.1.7.13	INTEGER	read-write	Applicable to AU only. The Maximum Information Rate (MIR) from AU to SU-EZ. Range for set: 128 to 12,032 (Kbps). The actual value (Get) will be the entered value rounded to the nearest multiple of 128 (N*128). This parameter is not runtime. The SU-EZ must be re-associated in order to re-apply this parameter.
INT brzaccVLSUHiddenESSIDSupport	1.3.6.1.4.1.12394.1.1.6.1.5.2	INTEGER	read-write	Applicable to SU/RB only. Enabling/Disabling the option for an SU/RB to associate with an AU/BU that is using Hidden ESSID
INT brzaccVLSUHiddenESSIDTimeout	1.3.6.1.4.1.12394.1.1.6.1.5.3	INTEGER	read-write	Applicable to SU/RB only. If an AU/BU rejects the subscribers because of worng ESSID the SU/RB will try again to associate with this AU/BU only after this period of time. The time is given in minutes
INT brzaccVLSUPerModulationLevelCountersApplicableModLevel	1.3.6.1.4.1.12394.1.1.11.2.5.2.1.2	INTEGER	read-only	Applicable to SU/RB. The applicable modulation level of the entry in the Per modulation level Counters table. Modulation Level 8 is not applicable for units with HW revision A.
brzaccVLSUPerModulationLevelCountersEntry	1.3.6.1.4.1.12394.1.1.11.2.5.2.1		not-accessible	Applicable to SU/RB. An entry in the Per modulation Counters table.
brzaccVLSUPerModulationLevelCountersTable	1.3.6.1.4.1.12394.1.1.11.2.5.2		not-accessible	Applicable to SU/RB. Per Rate Counters table.
INT brzaccVLSUPerModulationLevelCountersTableIdx	1.3.6.1.4.1.12394.1.1.11.2.5.2.1.1	INTEGER	read-only	Applicable to SU/RB. An index of an entry in the Per modulation level Counters table.
C32 brzaccVLSUPerModulationLevelCountersTxFailed	1.3.6.1.4.1.12394.1.1.11.2.5.2.1.4	Counter32	read-only	Applicable to SU/RB. The total number of dropped frames at the applicable Modulation Level.
C32 brzaccVLSUPerModulationLevelCountersTxSuccessEx	1.3.6.1.4.1.12394.1.1.11.2.5.2.1.3	Counter32	read-only	Applicable to SU/RB. The total number of successfully transmitted unicasts at the applicable modulation level.
brzaccVLSysInfo	1.3.6.1.4.1.12394.1.1.1
STR brzaccVLSystemLocation	1.3.6.1.4.1.12394.1.1.2.13	DisplayString	read-write	Applicable to all units. The unit location.
INT brzaccVLTcpPortPriRTPRTCP	1.3.6.1.4.1.12394.1.1.7.10.3.3.1	INTEGER	read-write	Applicable to all units. RTP/RTCP ports prioritization option for TCP packets. rtpANDrtcp(1): RTP and RTCP packets with destination port in the defined port ranges will get HIGH priority rtpOnly(2): only RTP packets (packets with even destination port) with destination port in the defined port ranges will get HIGH priority.
STR brzaccVLTcpPortRangeAdd	1.3.6.1.4.1.12394.1.1.7.10.3.3.4	DisplayString	read-write	Applicable to all units. Add port range(s) to TCP Port Ranges Table. Get operation will return the empty string. A range is defined - or where is the Start Port of the range and is the End Port. If only is specified the range is -. The value of and are between 0..65535. The user can add several ranges using comma to separate between ranges. Example: 10-256,99,987-900
brzaccVLTcpPortRangeConfig	1.3.6.1.4.1.12394.1.1.7.10.3.3
STR brzaccVLTcpPortRangeDelete	1.3.6.1.4.1.12394.1.1.7.10.3.3.5	DisplayString	read-write	Applicable to all units. Delete port range(s) from TCP Port Ranges Table. Get operation will return the empty string. A range is defined - or where is the Start Port of the range and is the End Port. If only is specified the range is -. The value of and are between 0..65535. The user can delete several ranges using comma to separate between ranges. Example: 10-256,99,987-900
INT brzaccVLTcpPortRangeDeleteAll	1.3.6.1.4.1.12394.1.1.7.10.3.3.6	INTEGER	read-write	Applicable to all units. Delete all entries form TCP Port Ranges Table Get operation will return 1
INT brzaccVLTcpPortRangeEnd	1.3.6.1.4.1.12394.1.1.7.10.3.3.3.1.2	INTEGER	read-only	Applicable to all units. End port of a TCP Port Range
brzaccVLTcpPortRangeEntry	1.3.6.1.4.1.12394.1.1.7.10.3.3.3.1		not-accessible	Applicable to all units. A TCP Port Ranges Table entry.
INT brzaccVLTcpPortRangeIdx	1.3.6.1.4.1.12394.1.1.7.10.3.3.3.1.3	INTEGER	read-only	Applicable to all units. TCP Port Range Entry's index
INT brzaccVLTcpPortRangeNum	1.3.6.1.4.1.12394.1.1.7.10.3.3.2	INTEGER	read-only	Applicable to all units. The number of entries in the TCP Port Range Table
INT brzaccVLTcpPortRangeStart	1.3.6.1.4.1.12394.1.1.7.10.3.3.3.1.1	INTEGER	read-only	Applicable to all units. Start port of a TCP Port Range
brzaccVLTcpPortRangeTable	1.3.6.1.4.1.12394.1.1.7.10.3.3.3		not-accessible	Table of TCP Port Ranges use for prioritization. The user can define up to 64 ranges. An entry is empty if start is 65535 and end is 0
INT brzaccVLTelnetLogoutTimer	1.3.6.1.4.1.12394.1.1.2.5	INTEGER	read-write	Applicable to all units. Time-out of management via Telnet program. Automatic exit if the program is inactive for the defined time. Range: 1 to 999 (minutes).
NTF brzaccVLTelnetStatusTRAP	1.3.6.1.4.1.12394.4.1.3.102			Applicable to all units. A trap indicating that a log-in or log-out has been performed via Telnet. Includes the log-in access right and the IP address of the PC performing Telnet.
INT brzaccVLThresholdLEDmode	1.3.6.1.4.1.12394.1.1.2.17.2.1.3	INTEGER	read-write	Applicable to all units with SW version 6.0 and higher, except AU. The condition to turn the LED on.
INT brzaccVLThresholdLEDnum	1.3.6.1.4.1.12394.1.1.2.17.2.1.1	INTEGER	read-only	Applicable to all units with SW version 6.0 and higher, except AU. The LED position and index.
INT brzaccVLThresholdLEDtarget	1.3.6.1.4.1.12394.1.1.2.17.2.1.4	INTEGER	read-write	Applicable to all units with SW version 6.0 and higher, except AU. The target value, depending on LED type, from brzaccVLThresholdLEDtype above.
INT brzaccVLThresholdLEDtype	1.3.6.1.4.1.12394.1.1.2.17.2.1.2	INTEGER	read-write	Applicable to all units with SW version 6.0 and higher, except AU. The type of measurement of the LED
brzaccVLThresholdTable	1.3.6.1.4.1.12394.1.1.2.17.2		not-accessible	Applicable to all units with SW version 6.0 and higher, except AU. A table with the settings for Threshold mode
brzaccVLThresholdTableEntry	1.3.6.1.4.1.12394.1.1.2.17.2.1		not-accessible	Applicable to all units with SW version 6.0 and higher, except AU. An entry in the ThresholdTable.
STR brzaccVLTimeSinceLastReset	1.3.6.1.4.1.12394.1.1.1.17	DisplayString	read-only	Applicable to all units. The elapsed time since last reset.
INT brzaccVLToSPrecedenceThreshold	1.3.6.1.4.1.12394.1.1.5.8.1	INTEGER	read-write	Applicable to all units. Not applicable to units with SW version 3.1 or higher. Priority threshold (based on the ToS) for frames received from the Ethernet port. Range: 0 to 7.
INT brzaccVLToSPrioritizationOption	1.3.6.1.4.1.12394.1.1.7.10.2.1	INTEGER	read-write	Applicable to all units. Disable/Enable IP ToS prioritization and choose the interpretation of the IP ToS field from IP header. ipPrecedence(2): The IP ToS field is defined by RFC791. In this case the prioritization will be done using the Precedence sub-field of IP ToS. This sub-field has 3 bits, so it can be between 0 and 7. dSCP(3): The IP ToS field is defined by RFC2474. In this case the prioritization will be done using the DSCP sub-field. The size of the sub-field is 6 bits, so the range is 0 to 63.
brzaccVLToSPriorityParameters	1.3.6.1.4.1.12394.1.1.5.8
C32 brzaccVLTotalNoOfDataFramesSubmitted	1.3.6.1.4.1.12394.1.1.11.2.3.5.4	Counter32	read-only	Applicable to all units. The total number of data frames submitted to the internal bridge for transmission to the wireless media.
C32 brzaccVLTotalRecievedDataFrames	1.3.6.1.4.1.12394.1.1.11.2.3.6	Counter32	read-only	Applicable to all units. The total number of data frames received from the wireless media, including duplicate frames.
C32 brzaccVLTotalRetransmittedFrames	1.3.6.1.4.1.12394.1.1.11.2.3.3	Counter32	read-only	Applicable to all units. The total number of retransmissions of data frames (counts all unsuccessful transmissions/retransmissions).
C32 brzaccVLTotalRxConcatenatedFramesDouble	1.3.6.1.4.1.12394.1.1.11.2.3.10	Counter32	read-only	Applicable to all units. The total number of double concatenated frames received from the wireless media, including duplicate frames.
C32 brzaccVLTotalRxConcatenatedFramesMore	1.3.6.1.4.1.12394.1.1.11.2.3.12	Counter32	read-only	Applicable to all units. The total number of data fast frames concatenated with more then two frames received from the wireless media, including duplicate frames.
C32 brzaccVLTotalRxConcatenatedFramesSingle	1.3.6.1.4.1.12394.1.1.11.2.3.11	Counter32	read-only	Applicable to all units. The total number of data fast frames single concatenated frames received from the wireless media, including duplicate frames.
C32 brzaccVLTotalRxEvents	1.3.6.1.4.1.12394.1.1.11.2.4.2.5	Counter32	read-only	Applicable to all units. The total number of Rx special events.
C32 brzaccVLTotalRxFramesFromWireless	1.3.6.1.4.1.12394.1.1.11.2.3.2	Counter32	read-only	Applicable to all units. The total number of frames that were received from the wireless media. The count includes data and control and management frames, including beacons received from the AU/BU. The count does not include frames that were discarded internally, bad frames and duplicate frames.
C32 brzaccVLTotalRxFramesViaEthernet	1.3.6.1.4.1.12394.1.1.11.2.2.1	Counter32	read-only	Applicable to all units. Total number of frames received via the Ethernet port.
C32 brzaccVLTotalTransmittedConcatenatedFramesDouble	1.3.6.1.4.1.12394.1.1.11.2.3.1.6	Counter32	read-only	Applicable to all products. The total number of double concatenated frames successfully transmitted to the wireless media, excluding retransmissions.
C32 brzaccVLTotalTransmittedConcatenatedFramesMore	1.3.6.1.4.1.12394.1.1.11.2.3.1.8	Counter32	read-only	Applicable to all products. The total number of concatenated frames with more then two frames successfully transmitted to the wireless media, excluding retransmissions.
C32 brzaccVLTotalTransmittedConcatenatedFramesSingle	1.3.6.1.4.1.12394.1.1.11.2.3.1.7	Counter32	read-only	Applicable to all products. The total number of double concatenated frames successfully transmitted to the wireless media, excluding retransmissions.
C32 brzaccVLTotalTransmittedUnicasts	1.3.6.1.4.1.12394.1.1.11.2.3.1.5	Counter32	read-only	Applicable to AU/BU only. The total number of unicast frames successfully transmitted to the wireless media, excluding retransmissions.
C32 brzaccVLTotalTxEvents	1.3.6.1.4.1.12394.1.1.11.2.4.1.5	Counter32	read-only	Applicable to all units. The total number of Tx special events.
C32 brzaccVLTotalTxFramesToWireless	1.3.6.1.4.1.12394.1.1.11.2.3.1.4	Counter32	read-only	Applicable to all units. The number of frames transmitted to the wireless media. The count includes one count for each data frame that was transmitted successfully (excluding retransmissions), and also the number of transmitted control and management frames, including beacons.
brzaccVLTrafficPriIpRange	1.3.6.1.4.1.12394.1.1.7.10.5
IP brzaccVLTrafficPriIpRangeIpAddress	1.3.6.1.4.1.12394.1.1.7.10.5.2	IpAddress	read-write	Applicable to all units. Defines the IP Address for the IP Range Prioritization. IP protocol packets with IP source address in range defined by Address and Mask will get High Priority.
IP brzaccVLTrafficPriIpRangeIpMask	1.3.6.1.4.1.12394.1.1.7.10.5.3	IpAddress	read-write	Applicable to all units. Defines the IP Mask for the IP Range Prioritization. IP protocol packets with IP source address in range defined by Address and Mask will get High Priority.
INT brzaccVLTrafficPriIpRangeOption	1.3.6.1.4.1.12394.1.1.7.10.5.1	INTEGER	read-write	Applicable to all units. disable(1): Disable IP Range Prioritization. ipSource(2): Prioritization of the IP protocol packets with IP source address in range defined by following two OIDs. ipDestination(3): Prioritization of the IP protocol packets with IP destination address in range defined by following two OIDs. ipSourceOrDestination(4): Prioritization of the IP protocol packets with IP source address or IP destination address in range defined by following two OIDs.
brzaccVLTrafficPriIPToS	1.3.6.1.4.1.12394.1.1.7.10.2
brzaccVLTrafficPrioritization	1.3.6.1.4.1.12394.1.1.7.10
brzaccVLTrafficPriUdpTcpPortRange	1.3.6.1.4.1.12394.1.1.7.10.3
brzaccVLTrafficPriVLAN	1.3.6.1.4.1.12394.1.1.7.10.1
brzaccVLTrafficStatistics	1.3.6.1.4.1.12394.1.1.11.2
INT brzaccVLTransmitPower	1.3.6.1.4.1.12394.1.1.6.23	INTEGER	read-write	Applicable to all units with SW version 4.0 and higher. The uniform transmit power for all modulation levels. For a specific modulation level the effective transmit power (brzaccVLTxPower) is the minimum between the uniform transmit power and the maximum transmit power for that modulation level.
brzaccVLTransmitPowerEntry	1.3.6.1.4.1.12394.1.1.6.5.1		not-accessible	Applicable to all units. An entry in the Transmit Power Table.
INT brzaccVLTransmitPowerIdx	1.3.6.1.4.1.12394.1.1.6.5.1.1	INTEGER	read-only	Applicable to all units. An index of an entry in the Transmit Power Table.
brzaccVLTransmitPowerTable	1.3.6.1.4.1.12394.1.1.6.5		not-accessible	Applicable to all units. A table of transmit power parameters.
INT brzaccVLTrapAccessRights	1.3.6.1.4.1.12394.1.1.14.6	INTEGER	read-only	Applicable to all units. The access rights used for login.
INT brzaccVLTrapFtpOrTftpStatus	1.3.6.1.4.1.12394.1.1.14.10	INTEGER	read-only	Applicable to all units. The status of the last FTP/TFTP loading procedure.
brzaccVLTrapHistory	1.3.6.1.4.1.12394.1.1.3.14.2
brzaccVLTrapHistoryEntry	1.3.6.1.4.1.12394.1.1.3.14.2.2.1		not-accessible	Applicable to AU/BU only. An entry in Trap History Table.
INT brzaccVLTrapHistorySequenceNumber	1.3.6.1.4.1.12394.1.1.3.14.2.2.1.1	INTEGER	read-only	Applicable to AU/BU only. Sequence number of the trap.
brzaccVLTrapHistoryTable	1.3.6.1.4.1.12394.1.1.3.14.2.2		not-accessible	Applicable to AU/BU only. This table contains the last 1024 traps generated by the unit.
INT brzaccVLTrapIntParam1	1.3.6.1.4.1.12394.1.1.3.14.2.2.1.4	INTEGER	read-only	Applicable to AU/BU only. It contains the first variable of integer type for the trap. If from the trap definition this variable is not applicable it will be 0.
INT brzaccVLTrapIntParam2	1.3.6.1.4.1.12394.1.1.3.14.2.2.1.5	INTEGER	read-only	Applicable to AU/BU only. It contains the second variable of integer type for the trap. If from the trap definition this variable is not applicable it will be 0.
INT brzaccVLTrapIntParam3	1.3.6.1.4.1.12394.1.1.3.14.2.2.1.6	INTEGER	read-only	Applicable to AU/BU only. It contains the third variable of integer type for the trap. If from the trap definition this variable is not applicable it will be 0.
INT brzaccVLTrapLog	1.3.6.1.4.1.12394.1.1.14.7	INTEGER	read-only	Applicable to all units. Login or logout to the Monitor program via Telnet.
MAC brzaccVLTrapMACAddress	1.3.6.1.4.1.12394.1.1.14.15	MacAddress	read-only	Applicable to BU/RB only. The MAC address of the BNET B unit whose type has been changed
MAC brzaccVLTrapMacAddrParam	1.3.6.1.4.1.12394.1.1.3.14.2.2.1.3	MacAddress	read-only	Applicable to AU/BU only. It contains the MAC Address of the trap if the trap type requires this field, otherwise it contains the NULL MAC Address.
IP brzaccVLTrapNewIP	1.3.6.1.4.1.12394.1.1.14.21	IpAddress	read-only	Applicable to AU/BU only. The code of group parameter that was changed.
INT brzaccVLTrapParameterChanged	1.3.6.1.4.1.12394.1.1.14.5	INTEGER	read-only	Not applicable starting with version 5.0. Applicable to all units. A modification to one of the parameters related to CIR/MIR, IP Filtering or VLAN.
INT brzaccVLTrapParameterGroupCode	1.3.6.1.4.1.12394.1.1.14.20	INTEGER	read-only	Applicable to AU/BU only. The code of group parameter that was changed.
INT brzaccVLTrapRTx	1.3.6.1.4.1.12394.1.1.14.9	INTEGER	read-only	Applicable to AU/BU only. Retransmissions as a percentage of total transmissions.
brzaccVLTraps	1.3.6.1.4.1.12394.1.1.14
INT brzaccVLTrapSequenceNumber	1.3.6.1.4.1.12394.1.1.14.18	INTEGER	read-only	Apllicable to AU/BU only. Trap Variable indicating the sequence number of the last trap generated.
STR brzaccVLTrapStrParam	1.3.6.1.4.1.12394.1.1.3.14.2.2.1.7	DisplayString	read-only	Applicable to AU/BU only. It contains the string variable of the trap if this variable exists for that trap, otherwise it will contain the empty string.
INT brzaccVLTrapSubscriberType	1.3.6.1.4.1.12394.1.1.14.14	INTEGER	read-only	Applicable to AUS only. The type of subscriber that was rejected by AUS
MAC brzaccVLTrapSUMacAddr	1.3.6.1.4.1.12394.1.1.14.1	MacAddress	read-only	Applicable to AU/BU only. SU/RB MAC Address.
STR brzaccVLTrapSWVersion	1.3.6.1.4.1.12394.1.1.14.17	DisplayString	read-only	The SW version of the SU that tries to associate with a station that has Wireless Link Prioritization Enabled
IP brzaccVLTrapTelnetUserIpAddress	1.3.6.1.4.1.12394.1.1.14.8	IpAddress	read-only	Applicable to all units. The IP address of a Telnet user.
STR brzaccVLTrapText	1.3.6.1.4.1.12394.1.1.14.3	DisplayString	read-only	Textual string for future use.
INT brzaccVLTrapToggle	1.3.6.1.4.1.12394.1.1.14.4	INTEGER	read-only	Applicable to AU/BU only. An On/Off toggle status.
INT brzaccVLTrapType	1.3.6.1.4.1.12394.1.1.3.14.2.2.1.2	INTEGER	read-only	Applicable to AU/BU only. It contains the trap type.
MAC brzaccVLTrapUnitMacAddr	1.3.6.1.4.1.12394.1.1.14.19	MacAddress	read-only	Applicable to all units. The MAC Address of the unit that is initiating the trap.
INT brzaccVLTxControl	1.3.6.1.4.1.12394.1.1.6.21	INTEGER	read-write	Applicable to AU/BU only. Tx Control of the AU/BU. Starting with version 4.0 it is run-time. For SW version below 4.0 the unit reset itself. If set to ethernetStatusControl, the unit will not transmit if the Ethernet link is down. This parameter can be configured only via the ethernet port.
brzaccVLTxEvents	1.3.6.1.4.1.12394.1.1.11.2.4.1
brzaccVLTxFramesToWireless	1.3.6.1.4.1.12394.1.1.11.2.3.1
STR brzaccVLTxPower	1.3.6.1.4.1.12394.1.1.6.5.1.4	DisplayString	read-write	Applicable to all units. Read-only for units with SW version 4.0 and higher. In AU/BU: The transmit power in dBm defined for the applicable rate. In SU/RB: If ATPC is disabled, this is the transmit power in dBm defined for the applicable rate. If ATPC is enabled, it serves as the initial transmit power in dBm for the ATPC algorithm. In SU/RB: The range is -10 dBm to the power value defined by brzaccVLMaximumTxPower for the applicable modulation level. In AU/BU: The range is -10 dBm to the power value defined by brzaccVLMaximumTxPowerRange for the applicable modulation level.
C32 brzaccVLTXRetransmissionPercentage	1.3.6.1.4.1.12394.1.1.11.2.3.13	Counter32	read-only	Applicable to all units. Indicates the percentage of frames that have been retransmitted.
C32 brzaccVLTxWirelessToEthernet	1.3.6.1.4.1.12394.1.1.11.2.2.2	Counter32	read-only	Applicable to all units. Total number of frames transmitted to the Ethernet port.
INT brzaccVLUdpPortPriRTPRTCP	1.3.6.1.4.1.12394.1.1.7.10.3.2.1	INTEGER	read-write	Applicale to all units. RTP/RTCP ports prioritization option for UDP packets. rtpANDrtcp(1): RTP and RTCP packets with destination port in the defined port ranges will get HIGH priority rtpOnly(2): only RTP packets (packets with even destination port) with destination port in the defined port ranges will get HIGH priority.
STR brzaccVLUdpPortRangeAdd	1.3.6.1.4.1.12394.1.1.7.10.3.2.4	DisplayString	read-write	Applicable to all units. Add port range(s) to UDP Port Ranges Table. Get operation will return the empty string. A range is defined - or where is the Start Port of the range and is the End Port. If only is specified the range is -. The value of and are between 0..65535. The user can add several ranges using a comma to separate between ranges. Example: 10-256,99,987-900
brzaccVLUdpPortRangeConfig	1.3.6.1.4.1.12394.1.1.7.10.3.2
STR brzaccVLUdpPortRangeDelete	1.3.6.1.4.1.12394.1.1.7.10.3.2.5	DisplayString	read-write	Applicable to all units. Delete port range(s) from UDP Port Ranges Table. Get operation will return the empty string. A range is defined - or where is the Start Port of the range and is the End Port. If only is specified the range is -. The value of and are between 0..65535. The user can delete several ranges using a comma to separate between ranges. Example: 10-256,99,987-900
INT brzaccVLUdpPortRangeDeleteAll	1.3.6.1.4.1.12394.1.1.7.10.3.2.6	INTEGER	read-write	Applicable to all units. Delete all entries form UDP Port Ranges Table. Get operation will return 1
INT brzaccVLUdpPortRangeEnd	1.3.6.1.4.1.12394.1.1.7.10.3.2.3.1.2	INTEGER	read-only	Applicable to all units. End port of an UDP Port Range
brzaccVLUdpPortRangeEntry	1.3.6.1.4.1.12394.1.1.7.10.3.2.3.1		not-accessible	Applicable to all units. A UDP Port Ranges Table entry.
INT brzaccVLUdpPortRangeIdx	1.3.6.1.4.1.12394.1.1.7.10.3.2.3.1.3	INTEGER	read-only	Applicable to all units. UDP Port Range Entry's index
INT brzaccVLUdpPortRangeNum	1.3.6.1.4.1.12394.1.1.7.10.3.2.2	INTEGER	read-only	Applicable to all units. The number of entries in the UDP Port Range Table
INT brzaccVLUdpPortRangeStart	1.3.6.1.4.1.12394.1.1.7.10.3.2.3.1.1	INTEGER	read-only	Applicable to all units. Start port of an UDP Port Range
brzaccVLUdpPortRangeTable	1.3.6.1.4.1.12394.1.1.7.10.3.2.3		not-accessible	Applicable to all units. A table of UDP port ranges use for prioritization. The user can define up to 64 ranges. An entry is empty if start is 65535 and end is 0
INT brzaccVLUdpTcpPortRangePrioritizationOption	1.3.6.1.4.1.12394.1.1.7.10.3.1	INTEGER	read-write	Applicable to all units. Disable/Enable Prioritization using UDP and/or TCP Port Ranges. udpOnly(2) : prioritization will be done only for UDP packets tcpOnly(3) : prioritization will be done only for TCP packets udpANDtcp(4): prioritization will be done for UDP and TCP packets
C32 brzaccVLUnderrunEvents	1.3.6.1.4.1.12394.1.1.11.2.4.1.3	Counter32	read-only	Applicable to all units. The number of frames whose transmission was aborted because the rate of submitting frames for transmission exceeded the available transmission capability.
INT brzaccVLUnicastRelaying	1.3.6.1.4.1.12394.1.1.5.5	INTEGER	read-write	Applicable to AU only. Not applicable to BreezeNET-B products. Enables/disables the relaying of unicast messages to the wireless link.
STR brzaccVLUnitBootVersion	1.3.6.1.4.1.12394.1.1.1.14	DisplayString	read-only	Applicable to all units. Boot version.
brzaccVLUnitControl	1.3.6.1.4.1.12394.1.1.2
STR brzaccVLUnitHwVersion	1.3.6.1.4.1.12394.1.1.1.1	DisplayString	read-only	Applicable to all units. Hardware platform version.
IP brzaccVLUnitIpAddress	1.3.6.1.4.1.12394.1.1.4.1	IpAddress	read-write	Applicable to all units. IP address of the unit.
MAC brzaccVLUnitMacAddress	1.3.6.1.4.1.12394.1.1.1.8	MacAddress	read-only	Applicable to all units. Unit hardware MAC address.
STR brzaccVLUnitName	1.3.6.1.4.1.12394.1.1.2.3	DisplayString	read-write	Applicable to all units. The unit name. A string of up to 32 printable ASCII characters.
brzaccVLUnitPasswords	1.3.6.1.4.1.12394.1.1.2.8
INT brzaccVLUnitType	1.3.6.1.4.1.12394.1.1.1.9	INTEGER	read-only	Applicable to all units. auBS (1) : AU-BS (modular access unit). auSA (2) : AU-SA (stand-alone access unit). su-6-1D (3) : SU-6-1D (subscriber unit supporting 6 Mbps) Starting with 5.0 this is deprecated. When a SU-6-1D is upgraded to 5.0, its type will be changed to SU-6-BD. su-6-BD (4) : SU-6-BD (subscriber unit supporting 6 Mbps). su-24-BD (5) : SU-24-BD (subscriber unit supporting 24 Mbps). bu-B14 (6) : BU-B14 (BreezeNET Base Unit supporting 14 Mbps). bu-B28 (7) : BU-B28 (BreezeNET Base Unit supporting 28 Mbps). rb-B14 (8) : RB-B14 (BreezeNET Remote Bridge supporting 14 Mbps). rb-B28 (9) : RB-B28 (BreezeNET Remote Bridge supporting 28 Mbps). su-BD (10) : SU-BD (subscriber unit). su-54-BD(11) : SU-54-BD (subscriber unit supporting 54 Mbps). su-3-1D (12) : SU-3-1D (subscriber unit supporting 3 Mbps). Starting with 5.0 this is deprecated. When a SU-3-1D is upgraded to 5.0, its type will be changed to SU-3-BD. su-3-4D (13) : SU-3-4D (subscriber unit supporting 3 Mbps). Starting with 5.0 SW version this unit will work in BD mode ausBS (14) : AUS-BS (modular access unit supporting maxim 25 (via licensing) subscribers and allowing association only with SU-3 or SU-6). ausSA (15) : AUS-SA (stand-alone access unit supporting maxim 25 (via licensing) subscribers and allowing association only with SU-3 or SU-6 ). auBS4900(16) : AU-BS-4900 (BreezeAccess 4900 modular access unit) auSA4900(17) : AU-SA-4900 (BreezeAccess 4900 stand alone access unit) suBD4900(18) : SU-BD-4900 (BreezeAccess 4900 subscriber unit) bu-B100 (19) : BU-B100 (BreezeNET Base Unit unlimited throughput) rb-B100 (20) : BU-B100 (BreezeNET Remote Bridge unlimited throughput) su-I (21) : SU-I au-EZ (22) : AU-EZ su-EZ (23) : SU-EZ su-V (24) : SU-V (subscriber unit supporting 12 Mbps downlink and 8 Mbps uplink ). bu-B10(25) : BU-B10 (BreezeNET Base Unit supporting 5 Mbps). rb-B10 (26) : RB-B10 (BreezeNET Base Unit supporting 5 Mbps). su-8-BD (27) : SU-8-BD (subscriber unit supporting 8 Mbps). su-1-BD (28) : SU-1-BD (subscriber unit supporting 1 Mbps). su-3-L (29) : SU-3-L (subscriber unit supporting 3 Mbps). su-6-L (30) : SU-6-L (subscriber unit supporting 6 Mbps). su-12-L (31) : SU-12-L (subscriber unit supporting 12 Mbps). au (32) : AU (security access unit). su (33) : SU (security subscriber unit).
NTF brzaccVLUnitTypeChangedTRAP	1.3.6.1.4.1.12394.4.1.3.111			Applicable to BU/RB only. This trap is generated when the user changes the type of the BreezeNET B unit. The RB can be converted in BU or vice versa. The first variable of the trap is the unit MAC Address. The second variable is the new type of the unit
MAC brzaccVLUnitWithMaxDistance	1.3.6.1.4.1.12394.1.1.6.15.4	MacAddress	read-only	Applicable AU only. Not applicable to BreezeNET-B units. The MAC address of the unit with the maximum distance from the AU.
brzaccVLUpLinkQualityIndicator	1.3.6.1.4.1.12394.1.1.11.6
INT brzaccVLUpLinkQualityIndicatorStatus	1.3.6.1.4.1.12394.1.1.11.6.3	INTEGER	read-only	Applicable to SU/RB Only. Indicates the test conditions. fullTest means that there are no limitations on the range of available modulation levels, and that all modulation levels from 1 to 8 can be used. limitedTest indicates that the results may not indicate the true quality since the available range is limited - by HW (HW Revision A), or by the applicable parameters in the country code, or by the configurable Maximum Modulation Level parameter.
INT brzaccVLUploadEventLogFile	1.3.6.1.4.1.12394.1.1.2.10.4.3	INTEGER	read-write	Applicable to all units. Execution of the event log upload operation.
INT brzaccVLUseDhcp	1.3.6.1.4.1.12394.1.1.4.4	INTEGER	read-write	Applicable to all units. DHCP client mode of operation. disabled : Use regular (manual) methods to configure IP parameters. dHCP Only: Use DHCP server to configure IP parameters. automatic: Use DHCP server to configure IP parameters. If a DHCP server is not available, use manually configured values.
INT brzaccVLUserFilterOption	1.3.6.1.4.1.12394.1.1.8.1	INTEGER	read-write	Applicable to SU, RB and AU. Not applicable to AU on 900 MHz. Defines user-filtering options. disable: No filtering. iPOnly: Only IP protocol frames pass. userDefinedAddrOnly: Only ip frames to/from user defined IP addresses pass. pPPoE Only: Only PPPoE frames pass. This option is not applicable for AU
brzaccVLUserFilterParams	1.3.6.1.4.1.12394.1.1.8
INT brzaccVLVlanDataPriority	1.3.6.1.4.1.12394.1.1.5.1.6.1	INTEGER	read-write	Applicable to SU/RB only. Priority tagging for data frames. Applicable to Access Link only. Range: 0 to 7.
INT brzaccVLVlanExtendedAccessRuleId	1.3.6.1.4.1.12394.1.1.5.1.8.1.2	INTEGER	read-write	Starting with version 6.0. Available for SU/RB units only. Identifies the VLAN Rule type of an entry/rule, in VLAN Rule Table for Extended Access Link.
INT brzaccVLVlanExtendedAccessRuleMulticastAllowed	1.3.6.1.4.1.12394.1.1.5.1.8.1.5	INTEGER	read-write	Starting with version 6.0. Available for SU/RB units only. Determine if Multicast frames are tagged and sent on wireless LAN. Option for an entry/rule, in VLAN Rule Table for Extended Access Link. Value 255 is returned if no rule defined for this entry.
STR brzaccVLVlanExtendedAccessRuleOperands	1.3.6.1.4.1.12394.1.1.5.1.8.1.7	DisplayString	read-write	Starting with version 6.0. Available for SU/RB units only. The VLAN Operand list of an entry/rule, in VLAN Rule Table for Extended Access Link. Operand list may be one of the following: v1-v2 : range (v1 - v2), v1 and v2 included (not applicable for IP protocols); v,m : value and mask (for MAC and IP only); v0 : single value; v1,v2,v3 : max 8-value enumeration (for Ports and IP protocols only). An operand may be: xxxxxxxxxxxx : 12-char hexadecimal representation of a MAC address; ddd.ddd.ddd.ddd : max 15-char decimal representation of an IP address; ddddd : max 5-char decimal representation of a Port; ddd : max 3-char decimal representation of an IP Protocol. Up to 63 printable ASCII characters.
INT brzaccVLVlanExtendedAccessRuleOpType	1.3.6.1.4.1.12394.1.1.5.1.8.1.6	INTEGER	read-write	Starting with version 6.0. Available for SU/RB units only. Identifies the VLAN Operand type of an entry/rule, in VLAN Rule Table for Extended Access Link. Range: 1-4. Value 255 is returned if no rule or default rule defined for this entry. Accepted combinations are: sourceMacAddress, destinationMacAddress - value, range, mask; sourceIpAddress, destinationIpAddress - value, range, mask; sourceUdpPort, destinationUdpPort - value, range, enumeration; sourceTcpPort, destinationTcpPort - value, range, enumeration; ipProtocol - value, enumeration
INT brzaccVLVlanExtendedAccessRulePriority	1.3.6.1.4.1.12394.1.1.5.1.8.1.4	INTEGER	read-write	Starting with version 6.0. Applicable to SU/RB units only. Identifies the Priority tagging for data frames, for an entry/rule, in VLAN Rule Table for Extended Access Link. Range: 0-7. Value 255 is returned if no rule defined for this entry.
brzaccVLVlanExtendedAccessRulesEntry	1.3.6.1.4.1.12394.1.1.5.1.8.1		not-accessible	Starting with version 6.0. Available for SU/RB units only. An entry in VLAN Rule Table for Extended Access Link.
brzaccVLVlanExtendedAccessRulesTable	1.3.6.1.4.1.12394.1.1.5.1.8		not-accessible	Starting with version 6.0. Available for SU/RB units only. An 8-VLAN Rule Table for Extended Access Link.
INT brzaccVLVlanExtendedAccessRulesTableIdx	1.3.6.1.4.1.12394.1.1.5.1.8.1.1	INTEGER	read-only	Starting with version 6.0. Available for SU/RB units only. A table index for a VLAN Rule entry/rule in the VLAN Rule Table for Extended Access Link.
INT brzaccVLVlanExtendedAccessRuleVlanId	1.3.6.1.4.1.12394.1.1.5.1.8.1.3	INTEGER	read-write	Starting with version 6.0. Available for SU/RB units only. Identifies the data VLAN ID of an entry/rule, in VLAN Rule Table for Extended Access Link. Range: 1-4094. Value zero is returned if no rule defined for this entry.
INT brzaccVLVlanExtendedTrunkVlanID	1.3.6.1.4.1.12394.1.1.5.1.9	INTEGER	read-write	Starting with version 6.0. Available for SU/RB units only. Native VLAN ID value, for Extended Trunk Link.
brzaccVLVLANForwarding	1.3.6.1.4.1.12394.1.1.5.1.4
brzaccVLVlanForwardingEntry	1.3.6.1.4.1.12394.1.1.5.1.4.2.1		not-accessible	Applicable to all units. A VLAN Forwarding Table entry. (applicable in Trunk and Service Provider links only).
INT brzaccVLVlanForwardingSupport	1.3.6.1.4.1.12394.1.1.5.1.4.1	INTEGER	read-write	Applicable to all units. Enables or disables the VLAN forwarding feature. (applicable in Trunk and Service Provider links only).
brzaccVLVlanForwardingTable	1.3.6.1.4.1.12394.1.1.5.1.4.2		not-accessible	Starting with version 5.0, this is deprecated. Use brzaccVLNewVlanForwardingTable instead. Applicable to all units. A VLAN Forwarding Table of up to 20 VLAN IDs of devices to which data frames are forwarded when VLAN Forwarding is Enabled. (applicable in Trunk and Service Provider links only).
INT brzaccVLVlanForwardingTableIdx	1.3.6.1.4.1.12394.1.1.5.1.4.2.1.1	INTEGER	read-only	Applicable to all units. A read only table index for a VLAN entry in the VLAN Forwarding Table.
INT brzaccVLVlanID	1.3.6.1.4.1.12394.1.1.5.1.1	INTEGER	read-write	Applicable to SU/RB only. VLAN ID for data frame tagging. Applicable to Access Link only. Range: 1 to 4094. 0 - not applicable.
INT brzaccVLVlanIdForwarding	1.3.6.1.4.1.12394.1.1.5.1.4.2.1.2	INTEGER	read-write	Applicable to all units. The list of VLAN ID's in the VLAN ID Forwarding Table. To Remove a VLAN ID - SET the corresponding entry to 0. To Add a new VLAN ID SET an entry which is currently 0. Range : 0 to 4094
INT brzaccVLVlanIdRelaying	1.3.6.1.4.1.12394.1.1.5.1.5.2.1.2	INTEGER	read-write	Applicable to AU only. Not applicable to BreezeNET-B products. The list of VLAN ID's in the VLAN ID Relaying Table. To Remove a VLAN ID - SET the corresponding entry to 0. To Add a new VLAN ID SET an entry which is currently 0. Range: 0 to 4094 , 0 - remove entry.
INT brzaccVLVlanManagementPriority	1.3.6.1.4.1.12394.1.1.5.1.6.2	INTEGER	read-write	Applicable to all units. Priority tagging for management frames. Range: 0 to 7.
INT brzaccVLVLANPriorityThreshold	1.3.6.1.4.1.12394.1.1.5.1.6.3	INTEGER	read-write	Applicable to all units. Not applicable to units with SW version 3.1 or higher. Priority threshold for tagged frames received from Ethernet port. Applicable to Hybrid Link and Trunk Link only. Valid values: 0-7.
brzaccVLVLANQinQ	1.3.6.1.4.1.12394.1.1.5.1.7
brzaccVLVlanRelaying	1.3.6.1.4.1.12394.1.1.5.1.5
brzaccVLVlanRelayingEntry	1.3.6.1.4.1.12394.1.1.5.1.5.2.1		not-accessible	Applicable to AU only. Not applicable to BreezeNET-B products. A VLAN Relaying Table entry. (applicable in Trunk and Service Provider links only).
INT brzaccVLVlanRelayingSupport	1.3.6.1.4.1.12394.1.1.5.1.5.1	INTEGER	read-write	Applicable to AU only. Not applicable to BreezeNET-B products. Enables or disables VLAN Relaying (applicable in Trunk and Service Provider links only).
brzaccVLVlanRelayingTable	1.3.6.1.4.1.12394.1.1.5.1.5.2		not-accessible	Starting with version 5.0, this is deprecated. Use brzaccVLNewVlanRelayingTable instead. Applicable to AU only. Not applicable to BreezeNET-B products. A VLAN Relaying Table of up to 20 VLAN IDs of devices to which data frames are relayed when VLAN Relaying is Enabled. (applicable in Trunk and Service Provider links only).
INT brzaccVLVlanRelayingTableIdx	1.3.6.1.4.1.12394.1.1.5.1.5.2.1.1	INTEGER	read-only	Applicable to AU only. Not applicable to BreezeNET-B products. A table index for a VLAN entry in the VLAN Relaying Table.
brzaccVLVLANSupport	1.3.6.1.4.1.12394.1.1.5.1
brzaccVLVLANTrafficPriority	1.3.6.1.4.1.12394.1.1.5.1.6
IP brzaccVLWi2IpAddress	1.3.6.1.4.1.12394.1.1.3.13	IpAddress	read-write	Applicable to SU/RB unit only. The IP Address of the WIFI WIMAX unit
brzaccVLWirelessLinkCounters	1.3.6.1.4.1.12394.1.1.11.2.3
brzaccVLWirelessLinkEvents	1.3.6.1.4.1.12394.1.1.11.2.4
brzaccVLWirelessLinkPrioritization	1.3.6.1.4.1.12394.1.1.7.10.4
INT brzaccVLWirelessLinkPrioritizationOption	1.3.6.1.4.1.12394.1.1.7.10.4.1	INTEGER	read-write	Applicable only to AU with a license for the Wireless Link Prioritization feature and to BU-100. Enable/disable the traffic prioritization over the Wireless Link
INT brzaccVLWirelessTrapThreshold	1.3.6.1.4.1.12394.1.1.6.4	INTEGER	read-write	Applicable to AU/BU only. A wireless link quality threshold, expressed in % of retransmissions, for sending the brzaccVLAUWirelessQualityTRAP. This trap indicate whether the quality has gone below or above the specified threshold. The Threshold Range: 1 to 100 (% retransmissions).
NTF brzaccVLWLPrioritizationNotSupportedBySUTRAP	1.3.6.1.4.1.12394.4.1.3.112			Applicable to AU/BU only. This trap is generated when an SU/RB with a SW version below 4.0 that does not support Wireless Link Prioritization is associated with an AU/BU with thw Wireless Link Prioritization Option enabled. The first variable of the trap is the SU/RB MAC Address. The second variable is the SW version of the SU/RB
brzNetB_BU_B10	1.3.6.1.4.1.12394.4.1.24
brzNetB_BU_B100	1.3.6.1.4.1.12394.4.1.23
brzNetB_BU_B14	1.3.6.1.4.1.12394.4.1.21
brzNetB_BU_B28	1.3.6.1.4.1.12394.4.1.22
brzNetB_RB_B10	1.3.6.1.4.1.12394.4.1.34
brzNetB_RB_B100	1.3.6.1.4.1.12394.4.1.33
brzNetB_RB_B14	1.3.6.1.4.1.12394.4.1.31
brzNetB_RB_B28	1.3.6.1.4.1.12394.4.1.32
mngIpFilterEntry	1.3.6.1.4.1.12394.1.1.3.3.1		not-accessible	Applicable to all units. A Management IP Filter Table entry.
mngIpFilterTable	1.3.6.1.4.1.12394.1.1.3.3		not-accessible	Starting with version 5.0, this is deprecated. Use newMngIpFilterTable instead. Applicable to all units. A Management IP Filter Table of up to 3 IP addresses of devices that are authorized to access the unit for management purposes.
mngTrapEntry	1.3.6.1.4.1.12394.1.1.3.7.1		not-accessible	Applicable to all units. A Management Trap Table entry.
mngTrapTable	1.3.6.1.4.1.12394.1.1.3.7		not-accessible	Starting with version 5.0, this is deprecated. Use newMngTrapTable instead. Applicable to all units. A Management Trap Table of up to 10 IP addresses of stations to send traps to.
MAC mptEthernetStationMACAddress	1.3.6.1.4.1.12394.1.1.11.7.1.1.1	MacAddress	read-only	Applicable to AU/BU only. The MAC address of the Ethernet station. It is used as an index in the MAC Pinpoint Table.
MAC mptUnitMACAddress	1.3.6.1.4.1.12394.1.1.11.7.1.1.2	MacAddress	read-only	Applicable to AU/BU only. The MAC address of the wireless device used by the station with the MAC Address from the index in order to access the wireless network.
newMngIpFilterEntry	1.3.6.1.4.1.12394.1.1.3.15.1		not-accessible	Applicable to all units. A Management IP Filter Table entry.
newMngIpFilterTable	1.3.6.1.4.1.12394.1.1.3.15		not-accessible	Applicable to all units. A Management IP Filter Table of up to 10 IP addresses of devices that are authorized to access the unit for management purposes.
newMngTrapEntry	1.3.6.1.4.1.12394.1.1.3.16.1		not-accessible	Applicable to all units. A Management Trap Table entry.
newMngTrapTable	1.3.6.1.4.1.12394.1.1.3.16		not-accessible	Applicable to all units. A Management Trap Table of up to 10 IP addresses of stations to send traps to.
products	1.3.6.1.4.1.12394.1

RFC description

Alvarion vendor MIB for 802.11 WLAN device management including radio, access point, and client monitoring; vendor-private.

Start monitoring Alvarion BreezeACCESS/BreezeNET wireless broadband equipment (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ALVARION-DOT11-WLAN-MIB