APTIS-ACTIONS-MIB

All MIBs › APTIS-ACTIONS-MIB

Organization: Nortel Networks

Last Updated: 2000-04-14

Category: DSL and Broadband

Description: Nortel Networks Aptis DSL concentrator action and command execution management.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is APTIS-ACTIONS-MIB?

APTIS-ACTIONS-MIB is a Nortel Networks module for their Aptis DSL concentrator platform, defining administrative action/command objects that can be invoked through SNMP, making it a control/trigger module rather than a status-reporting one. With no sample runtime objects captured, it appears focused on issuing commands, such as resets, reboots, or configuration actions, rather than exposing gauges or status tables. Its relevance to hardware/software status monitoring is indirect: it is used to trigger actions whose effects (such as a restarted component or an applied configuration change) would then be observed through other Aptis MIBs' status objects. It is part of the larger Nortel Aptis MIB family and depends on companion chassis/interface MIBs to report the results of the actions it triggers. It is deployed on Nortel Aptis DSL concentrators/access multiplexers in telco central offices, used by provisioning and NOC systems to issue remote administrative commands. Network engineers evaluating or troubleshooting this functionality can download the APTIS-ACTIONS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in APTIS-ACTIONS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Nortel Networks Aptis DSL concentrator/access multiplexer

Monitoring Examples

No sample objects were available for this module, and by its own description it is an action/command MIB rather than a monitoring MIB; a realistic use would be an operator invoking a defined administrative action object to force a reset or configuration change on the Aptis concentrator and then checking the result via separate Aptis status MIBs, but no monitorable objects are exposed here to describe concretely.

Imported Objects

From APTIS-MIB

Boolean
aptis-actions

From APTIS-REG-MIB

aptis-modules

From SNMPv2-SMI

IpAddress
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString
RowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
aptisActionsModule	1.3.6.1.4.1.2637.1.1.5			The following variables describe the administrative actions that may be invoked through SNMP.
slotControlTable	1.3.6.1.4.1.2637.2.3.203		not-accessible	slot control
slotControlEntry	1.3.6.1.4.1.2637.2.3.203.1		not-accessible	This is the structure of entries in the slotControlTable.
INT slotControlInstance	1.3.6.1.4.1.2637.2.3.203.1.1	INTEGER	read-create	Each invocation of this action will have a unique instance number, assigned by the switch.
INT slotControlStatusGeneral	1.3.6.1.4.1.2637.2.3.203.1.2	INTEGER	read-create	like, did it work, or what? This is the standard actionStatus enum used for all actions.
INT slotControlStatusSpecific	1.3.6.1.4.1.2637.2.3.203.1.3	INTEGER	read-create	like, did it work, or what? If the generalStatus is err-param or failed, this will hold a more specific error number.
INT slotControlSlotIndex	1.3.6.1.4.1.2637.2.3.203.1.11	INTEGER	read-create	The physical slot number.
INT slotControlSlotAction	1.3.6.1.4.1.2637.2.3.203.1.12	INTEGER	read-create	The action requested for this slot.
sessionTerminateTable	1.3.6.1.4.1.2637.2.3.230		not-accessible	This action allows a remote manager to terminate an active session.
sessionTerminateEntry	1.3.6.1.4.1.2637.2.3.230.1		not-accessible	This is the structure of entries in the sessionTerminateTable.
INT sessionTerminateInstance	1.3.6.1.4.1.2637.2.3.230.1.1	INTEGER	read-create	Each invocation of this action will have a unique instance number, assigned by the switch.
INT sessionTerminateStatusGeneral	1.3.6.1.4.1.2637.2.3.230.1.2	INTEGER	read-create	This is the standard actionStatus enum used for all actions.
INT sessionTerminateStatusSpecific	1.3.6.1.4.1.2637.2.3.230.1.3	INTEGER	read-create	If generalStatus is err-param or failed, this will hold a more specific error number.
INT sessionTerminateBootEra	1.3.6.1.4.1.2637.2.3.230.1.11	INTEGER	read-create	An input parameter to the session-terminate action. Together with the sessionID, uniquely identifies the session to terminate. If a value is provided, it must match the current value of bootEra, so this field is only provided as a safeguard to ensure that sessions from the wrong boot era can't be terminated accidentally.
INT sessionTerminateSessionID	1.3.6.1.4.1.2637.2.3.230.1.12	INTEGER	read-create	An input parameter to the session-terminate action, naming the session which should be terminated.
STR sessionTerminateSignature	1.3.6.1.4.1.2637.2.3.230.1.13	DisplayString	read-create	An input parameter to the session-terminate action, providing a cryptographically secure verification that the manager requesting the termination has the appropriate credentials to do so. NOTE: the exact algorithm for generating the signature has not yet been determined.
t1TestTable	1.3.6.1.4.1.2637.2.3.2106		not-accessible	T1 Testing Control.
t1TestEntry	1.3.6.1.4.1.2637.2.3.2106.1		not-accessible	This is the structure of entries in the t1TestTable.
INT t1TestInstance	1.3.6.1.4.1.2637.2.3.2106.1.1	INTEGER	read-create	T1 Test Instance.
INT t1TestTestType	1.3.6.1.4.1.2637.2.3.2106.1.2	INTEGER	read-create	type of test to run.
INT t1TestSlotNumber	1.3.6.1.4.1.2637.2.3.2106.1.3	INTEGER	read-create	ID of the slot to run the test on.
INT t1TestPortNumber	1.3.6.1.4.1.2637.2.3.2106.1.4	INTEGER	read-create	ID of the DS1 to run the test on.
INT t1TestTestLength	1.3.6.1.4.1.2637.2.3.2106.1.5	INTEGER	read-create	number of bytes of data to send.
INT t1TestErrorRate	1.3.6.1.4.1.2637.2.3.2106.1.6	INTEGER	read-create	percentage of data received with errors.
INT t1TestState	1.3.6.1.4.1.2637.2.3.2106.1.7	INTEGER	read-create	current state of test.
flashWriteTable	1.3.6.1.4.1.2637.2.3.3501		not-accessible	This action causes a portion of the configuration subtree to be written out to a text file on one of the CVX system's local flash cards.
flashWriteEntry	1.3.6.1.4.1.2637.2.3.3501.1		not-accessible	This is the structure of entries in the flashWriteTable.
INT flashWriteInstance	1.3.6.1.4.1.2637.2.3.3501.1.1	INTEGER	read-create	Each invocation of this action will have a unique instance number, assigned by the switch.
INT flashWriteStatusGeneral	1.3.6.1.4.1.2637.2.3.3501.1.2	INTEGER	read-create	This is the standard actionStatus enum used for all actions.
INT flashWriteStatusSpecific	1.3.6.1.4.1.2637.2.3.3501.1.3	INTEGER	read-create	If generalStatus is err-param or failed, this will hold a more specific error number.
STR flashWritePathString	1.3.6.1.4.1.2637.2.3.3501.1.11	DisplayString	read-create	The starting node in the configuration tree. The contents of all the nodes under this node will be written out to the text file.
STR flashWriteFileName	1.3.6.1.4.1.2637.2.3.3501.1.12	DisplayString	read-create	The relative file name to hold the text config. The CVX file system uses drive C: to refer to the bottom flash card, and D: to refer to the top flash card. If the drive letter is not specified, then C: is assumed. If this file exists, it will only be overwritten with a complete copy of the output from this action. NOTE that the file CONFIG.CVX is not accessible through this action. To save the config to flash where it will be used at the next reboot, use the flashSave action instead.
INT flashWriteBytesWritten	1.3.6.1.4.1.2637.2.3.3501.1.13	INTEGER	read-create	On success, the total number of bytes written to flash.
BOO flashWriteVerboseMode	1.3.6.1.4.1.2637.2.3.3501.1.14	Boolean	read-create	Setting this field to TRUE requests that the output file contain all configuration values, otherwise only those that differ from the default values.
flashReadTable	1.3.6.1.4.1.2637.2.3.3502		not-accessible	This action causes the configuration subtree to be read to one of the CVX system's local flash cards.
flashReadEntry	1.3.6.1.4.1.2637.2.3.3502.1		not-accessible	This is the structure of entries in the flashReadTable.
INT flashReadInstance	1.3.6.1.4.1.2637.2.3.3502.1.1	INTEGER	read-create	Each invocation of this action will have a unique instance number, assigned by the switch.
INT flashReadStatusGeneral	1.3.6.1.4.1.2637.2.3.3502.1.2	INTEGER	read-create	This is the standard actionStatus enum used for all actions.
STR flashReadFileName	1.3.6.1.4.1.2637.2.3.3502.1.12	DisplayString	read-create	The relative file name to hold the text config. The CVX file system uses drive C: to refer to the bottom flash card, and D: to refer to the top flash card. If the drive letter is not specified, then C: is assumed.
INT flashReadLinesRead	1.3.6.1.4.1.2637.2.3.3502.1.13	INTEGER	read-create	On success, the total number of lines read from flash.
flashSaveTable	1.3.6.1.4.1.2637.2.3.3503		not-accessible	This action saves the configuration to the flash file CONFIG.CVX. It is equivalent to the 'write' command in the CLI.
flashSaveEntry	1.3.6.1.4.1.2637.2.3.3503.1		not-accessible	This is the structure of entries in the flashSaveTable.
INT flashSaveInstance	1.3.6.1.4.1.2637.2.3.3503.1.1	INTEGER	read-create	Each invocation of this action will have a unique instance number, assigned by the switch.
INT flashSaveStatusGeneral	1.3.6.1.4.1.2637.2.3.3503.1.2	INTEGER	read-create	This is the standard actionStatus enum used for all actions.
INT flashSaveStatusSpecific	1.3.6.1.4.1.2637.2.3.3503.1.3	INTEGER	read-create	If generalStatus is err-param or failed, this will hold a more specific error number.
resetTable	1.3.6.1.4.1.2637.2.3.3510		not-accessible	CVX Chassis Options.
resetEntry	1.3.6.1.4.1.2637.2.3.3510.1		not-accessible	This is the structure of entries in the resetTable.
INT resetInstance	1.3.6.1.4.1.2637.2.3.3510.1.1	INTEGER	read-create	Each invocation of this action will have a unique instance number, assigned by the switch.
INT resetStatusGeneral	1.3.6.1.4.1.2637.2.3.3510.1.2	INTEGER	read-create	This is the standard actionStatus enum used for all actions.
INT resetResetType	1.3.6.1.4.1.2637.2.3.3510.1.11	INTEGER	read-create	Select the type of reset requested.

RFC description

Nortel Networks enterprise MIB defining actionable operations and control functions for Aptis network equipment (vendor-private).

Start monitoring Nortel Networks Aptis DSL concentrator/access multiplexer (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download APTIS-ACTIONS-MIB

What Is APTIS-ACTIONS-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description