ALVARION-DOT11-WLAN-MIB :: brzaccVLAUDefinedFrequencyNew

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsALVARION-DOT11-WLAN-MIBbrzaccVLAUDefinedFrequencyNew

brzaccVLAUDefinedFrequencyNew

Module: ALVARION-DOT11-WLAN-MIB

OID (symbolic): ALVARION-DOT11-WLAN-MIB::brzaccVLAUDefinedFrequencyNew

OID (numeric): 1.3.6.1.4.1.12394.1.1.6.12.14

Node type: OBJECT-TYPE

Type: DisplayString

Access: read-write

Description: Applicable to AU/BU. For 5.8GHz products with SW version below 2.0 this is the frequency in MHz of the AU/BU after the next reset. For units with SW version 2.0 and up this is the frequency in MHz to use when the DFS Option is disabled. (Replaces brzaccVLAUDefinedFrequency to support a resolution of 0.5 MHz for units with HW revision C and higher). For 5.8GHz products with SW version below 2.0 the range is 5740 to 5830 MHz using 10MHz resolution. For units with SW version 2.0 and up the range is as defined in the selected Sub Band.

What is brzaccVLAUDefinedFrequencyNew?

A read-write DisplayString (MHz) specifying the AU's manual frequency when DFS is disabled, supporting 0.5 MHz granularity. For SW 2.0+ with DFS enabled, it defines fallback frequency if automatic selection is unavailable. Example: set to '5785.0' to force operation on a specific interference-free channel.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.12394.1.1.6.12.14
snmpwalk -v2c -c public <target> ALVARION-DOT11-WLAN-MIB::brzaccVLAUDefinedFrequencyNew

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.12394.1.1.6.12.14.1
snmpget -v2c -c public <target> ALVARION-DOT11-WLAN-MIB::brzaccVLAUDefinedFrequencyNew.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.12394.1.1.6.12.14.1 s <value>

Start monitoring Alvarion BreezeACCESS/BreezeNET wireless broadband equipment (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ALVARION-DOT11-WLAN-MIB::brzaccVLAUDefinedFrequencyNew OID value, configure state conditions and alerts, and monitor any Alvarion BreezeACCESS/BreezeNET wireless broadband equipment (legacy) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.12394alvarionALVARION-DOT11-WLAN-MIB
1.3.6.1.4.1.12394.1productsALVARION-DOT11-WLAN-MIB
1.3.6.1.4.1.12394.1.1breezeAccessVLMibALVARION-DOT11-WLAN-MIB
1.3.6.1.4.1.12394.1.1.6brzaccVLAirInterfaceALVARION-DOT11-WLAN-MIB
1.3.6.1.4.1.12394.1.1.6.12brzaccVLFrequencyDefinitionALVARION-DOT11-WLAN-MIB
1.3.6.1.4.1.12394.1.1.6.12.14brzaccVLAUDefinedFrequencyNewALVARION-DOT11-WLAN-MIB