ALCATEL-IND1-DHCPV6-MIB

All MIBs › ALCATEL-IND1-DHCPV6-MIB

Organization: Alcatel-Lucent

Last Updated: 2013-03-22

Category: IP and Core Protocols, Vendor: Alcatel-Lucent

Description: Alcatel OmniSwitch DHCPv6 MIB for managing IPv6 address assignment server and relay agent configuration.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ALCATEL-IND1-DHCPV6-MIB?

ALCATEL-IND1-DHCPV6-MIB is an Alcatel-proprietary OmniSwitch MIB for managing DHCPv6 functionality, covering both the DHCPv6 relay agent and the DHCPv6 server role for IPv6 address assignment. It exposes configuration and administrative-control objects such as relay admin status per interface, relay destination server addressing, and server-side global config/restart/clear-statistics controls. Monitoring with this MIB centers on confirming the software configuration and operational state of the switch's DHCPv6 relay/server feature — e.g., whether relay is enabled on the right interfaces and pointed at the right destination servers — which is important for verifying IPv6 clients on a VLAN can actually obtain addresses, a service-availability concern rather than a hardware-health one. It is an Alcatel proprietary extension without a stated direct dependency on the standard DHCPv6 MIBs, though it parallels the same functional area. It is deployed on Alcatel-Lucent OmniSwitch devices acting as DHCPv6 relay agents or servers in dual-stack or IPv6 enterprise/campus networks. Engineers can download the ALCATEL-IND1-DHCPV6-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ALCATEL-IND1-DHCPV6-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Alcatel-Lucent OmniSwitch switch

Monitoring Examples

An administrator would poll alaDHCPv6RelayInterfaceTable entries for alaDHCPv6RelayInterfaceAdminStatus per VLAN interface, and check alaDHCPv6RelayDestinationTable for alaDHCPv6RelayDestinationAddress/AddressType/RowStatus to confirm relay destinations are correctly provisioned. If alaDHCPv6RelayInterfaceAdminStatus shows relay disabled on a VLAN where IPv6 clients are reporting no address assignment, that pinpoints a configuration gap rather than a problem with the upstream DHCPv6 server itself.

What Can Be Monitored

DHCPv6 relay admin status per interface
relay destination server configuration
DHCPv6 server global config status
server restart/clear-statistics control state

Imported Objects

From ALCATEL-IND1-BASE

softentIND1Ipv6

OBJECT-IDENTITY

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From IPV6-MIB

ipv6IfIndex

OBJECT-TYPE

From IPV6-TC

Ipv6Address
Ipv6IfIndexOrZero

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DateAndTime
DisplayString
PhysAddress
RowStatus
TEXTUAL-CONVENTION
TimeStamp
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
alcatelIND1DHCPv6MIB	1.3.6.1.4.1.6486.801.1.2.1.29.2			This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): Propietary DHCPv6 MIB definitions The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 2013 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
alcatelIND1DHCPv6MIBNotifications	1.3.6.1.4.1.6486.801.1.2.1.29.2.0
NTF alaDHCPv6SrvLeaseUtilizationThresholdTrap	1.3.6.1.4.1.6486.801.1.2.1.29.2.0.1			When the lease utilization in a subnet exceeds or deceeds threshold value set by the application, a notification is sent to the Management Entity, with the DHCPv6 Server lease utilization information.
alcatelIND1DHCPv6MIBObjects	1.3.6.1.4.1.6486.801.1.2.1.29.2.1
alaDHCPv6RelayConfig	1.3.6.1.4.1.6486.801.1.2.1.29.2.1.1
INT alaDHCPv6RelayAdminStatus	1.3.6.1.4.1.6486.801.1.2.1.29.2.1.1.1	INTEGER	read-write	Global DHCPv6 administrative status. This object provides a means to globally enable or disable the DHCPv6 relay feature. DHCPv6 Relay must still be enabled on individual interfaces in order for relay operation to occur.
alaDHCPv6SrvConfig	1.3.6.1.4.1.6486.801.1.2.1.29.2.1.2
INT alaDHCPv6SrvGlobalConfigStatus	1.3.6.1.4.1.6486.801.1.2.1.29.2.1.2.1	INTEGER	read-write	This object is used to enable(1) or disable(2) DHCPv6 Server on the switch.
INT alaDHCPv6SrvGlobalRestart	1.3.6.1.4.1.6486.801.1.2.1.29.2.1.2.2	INTEGER	read-write	This object is used to restart(2) the DHCPv6 Server on the switch. Default value is inactive(1) which user can not set.
INT alaDHCPv6SrvGlobalClearStat	1.3.6.1.4.1.6486.801.1.2.1.29.2.1.2.3	INTEGER	read-write	Defines the global clear statistics control for DHCPv6 Server. default(1) - default value for this object, reset(2) - indicates that all statistic related to DHCPv6 server in the system should get cleared.
alaDHCPv6RelayInterfaceTable	1.3.6.1.4.1.6486.801.1.2.1.29.2.1.3		not-accessible	Table controlling DHCPv6 Relay on IPv6 interfaces. This table extends the corresponding IPv6 interface entry in alaIPv6InterfaceTable.
alaDHCPv6RelayInterfaceEntry	1.3.6.1.4.1.6486.801.1.2.1.29.2.1.3.1		not-accessible	An DHCPv6 relay interface entry.
INT alaDHCPv6RelayInterfaceAdminStatus	1.3.6.1.4.1.6486.801.1.2.1.29.2.1.3.1.1	INTEGER	read-create	DHCPv6 administrative status on the interface.
alaDHCPv6RelayDestinationTable	1.3.6.1.4.1.6486.801.1.2.1.29.2.1.4		not-accessible	Table allowing the creation and removal of DHCPv6 Relay destinations for an interface.
alaDHCPv6RelayDestinationEntry	1.3.6.1.4.1.6486.801.1.2.1.29.2.1.4.1		not-accessible	A DHCPv6 relay destination entry.
IPt alaDHCPv6RelayDestinationAddressType	1.3.6.1.4.1.6486.801.1.2.1.29.2.1.4.1.1	InetAddressType	not-accessible	The address type of a DHCPv6 relay destination. Only ipv6(2) or ipv6z(4) are allowed.
IP alaDHCPv6RelayDestinationAddress	1.3.6.1.4.1.6486.801.1.2.1.29.2.1.4.1.2	InetAddress	not-accessible	The IPv6 address of a DHCPv6 relay destination.
ROW alaDHCPv6RelayDestinationRowStatus	1.3.6.1.4.1.6486.801.1.2.1.29.2.1.4.1.3	RowStatus	read-create	Used to control the addition and removal of DHCPv6 relay destinations.
alaDHCPv6SrvLease	1.3.6.1.4.1.6486.801.1.2.1.29.2.1.5
alaDHCPv6SrvLeaseTable	1.3.6.1.4.1.6486.801.1.2.1.29.2.1.5.1		not-accessible	DHCPv6 server lease table.
alaDHCPv6SrvLeaseEntry	1.3.6.1.4.1.6486.801.1.2.1.29.2.1.5.1.1		not-accessible	DHCPv6 server lease entry.
ADR alaDHCPv6SrvLeaseIpv6Address	1.3.6.1.4.1.6486.801.1.2.1.29.2.1.5.1.1.1	Ipv6Address	not-accessible	IPv6 address assigned to the client
DAT alaDHCPv6SrvLeaseLeaseGrant	1.3.6.1.4.1.6486.801.1.2.1.29.2.1.5.1.1.2	DateAndTime	read-only	Lease granted time for the client.
DAT alaDHCPv6SrvLeasePrefLeaseExpiry	1.3.6.1.4.1.6486.801.1.2.1.29.2.1.5.1.1.3	DateAndTime	read-only	Preferred Lease expiry of the client.
DAT alaDHCPv6SrvLeaseValidLeaseExpiry	1.3.6.1.4.1.6486.801.1.2.1.29.2.1.5.1.1.4	DateAndTime	read-only	Valid Lease expiry of the client.
INT alaDHCPv6SrvLeaseType	1.3.6.1.4.1.6486.801.1.2.1.29.2.1.5.1.1.5	INTEGER	read-only	Type of the lease.
alaDHCPv6SrvTrapsObj	1.3.6.1.4.1.6486.801.1.2.1.29.2.1.6
INT alaDHCPv6SrvLeaseThresholdStatus	1.3.6.1.4.1.6486.801.1.2.1.29.2.1.6.1	INTEGER	accessible-for-notify	This object specifies the threshold status of subnet utilization.
STR alaDHCPv6SrvSubnetDescriptor	1.3.6.1.4.1.6486.801.1.2.1.29.2.1.6.2	DisplayString	accessible-for-notify	This object specifies the subnet Descriptor. Denotes the IPv6 address
alcatelIND1DHCPv6MIBConformance	1.3.6.1.4.1.6486.801.1.2.1.29.2.2
alcatelIND1DHCPv6MIBCompliances	1.3.6.1.4.1.6486.801.1.2.1.29.2.2.1
alaDHCPv6Compliance	1.3.6.1.4.1.6486.801.1.2.1.29.2.2.1.1			The compliance statement for switches implementing ALCATEL-IND1-DHCPV6-MIB.
alcatelIND1DHCPv6MIBGroups	1.3.6.1.4.1.6486.801.1.2.1.29.2.2.2
alaDHCPv6RelayGroup	1.3.6.1.4.1.6486.801.1.2.1.29.2.2.2.1			A collection of objects to support management of DHCPv6 Relay.
alaDHCPv6SrvGroup	1.3.6.1.4.1.6486.801.1.2.1.29.2.2.2.2			A collection of objects to support management of DHCPv6 server.
alaDHCPv6SrvNotificationsGroup	1.3.6.1.4.1.6486.801.1.2.1.29.2.2.2.3			Notifications for DHCPv6 server.
alaDHCPv6SrvLeaseUtilizationThresholdGroup	1.3.6.1.4.1.6486.801.1.2.1.29.2.2.2.4			When the lease utilization in a subnet exceeds or deceeds threshold value set by the application, a notification is sent to the Management Entity, with the DHCPv6 Server lease utilization information.

RFC description

Alcatel-Lucent DHCPv6 relay and server MIB for IPv6 dynamic host configuration protocol management on Alcatel devices.

Start monitoring Alcatel-Lucent Enterprise OmniSwitch switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ALCATEL-IND1-DHCPV6-MIB

What Is ALCATEL-IND1-DHCPV6-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description